How to catch PL/SQL: ORA-00904 error?

Similar Questions

• Number of error SQL ORA-00904: invalid column name has occurred.

  Hello
  on P8.18 on a Win 2003 server when we launch SWPAUDIT, it failed with:
  Number of error SQL ORA-00904: invalid column name has occurred. Query process failed.
  I searched this error on metalink3. Nothing in connection with.
  
  Any idea?
  
  Thank you.

  Please give a clear picture of what you are doing... .and what paintings... There is the possibility of the audit refers to certain tables... with deleted. names of columns just look in the structure of what you audit?

  Please, find the name of column...

  ORA-00904: string: invalid identifier
  Cause: The column name entered is invalid or missing.
  Action: Enter a valid column name. A valid column name must start with a letter, must be less than or equal to 30 characters and include only alphanumeric characters and the special characters $, _, and #. If it contains other characters, then it must be enclosed in quotation marks. It cannot be a reserved word.

• PL/SQL: ORA-00904 invalid identifier, PLS-00225: reference of the subprogram or cursor is out of reach

  Hi gurus,

  Your help is greatly appreciated.

  Will I have a fucntion where we have the object it contains.

  The changes that I have doen are: 2 new cusrosrs, but its failure with the error below.

  Highlighted are the changes I made. his length very well before your help is greatly appreciated.

  1) PL/SQL: ORA-00904: "GET_ACQ_ID.". ' ACQ_ID ': invalid identifier.

  (2) PLS-00225: subprogram or cursor reference 'GET_ACQ_ID' is out of range

  Here is the code:

  _________________________________________________________________________

  FUNCTION GET_IP_COMM_INFO return PROD. TERMINAL_IP_COMM_INFO_TAB IS

  vTer TER.ter_id%TYPE;
  vAPPL_ID TAC.appl_id%TYPE;
  vValue TSF.vALUE%TYPE;

  IP_COMM_INFO_LIST PROD. TERMINAL_IP_COMM_INFO_TAB: = PROD. TERMINAL_IP_COMM_INFO_TAB();

  CURSOR GET_ACQ_ID IS
  SELECT ACQ_ID
  TER TAHA, MERC M, PROF
  WHERE T.MER_ID = M.MER_ID
  AND M.PROFID = P.PROF_ID
  AND T.TER_ID = vTer_id;

  
  CURSOR GET_INFO_CURSOR IS
  SELECT H.DESCRIPTION AS HOST_DESCRIPTION
  PROD. HOST H, PROD. APP_IP_COMM_ACCESS_INFO AICAI
  WHERE (AICAI. HOST_ID = H.HOST_ID) and
  (AICAI. APPL_ID = vAPPL_ID);

  CURSOR GET_ACQ_CURSOR IS
  SELECT H.DESCRIPTION AS HOST_DESCRIPTION
  PROD. HOST H, PROD. APP_IP_COMM_ACCESS_INFO AICAI, PROD. ACQUIRER_IP_COMM_ACCESS_INFO ACICAI
  WHERE (AICAI. HOST_ID = H.HOST_ID) and
  (AICAI. APPL_ID = vAPPL_ID) AND
  (ACQUIRER_ID = GET_ACQ_ID. ACQ_ID);
  BEGIN
  
  vTer_id: = GLOBAL_VARIABLES.gv_ref_Ter_id;

  BEGIN
  SELECT the VALUE IN vvalue OF Tsf
  WHERE TER_id = vTEr_ID AND APPL_ID is vAPPL_ID and FEATURE_ID = 861;.

  Vvalue = '04' IF THEN
  For GET_ACQ_REC IN GET_ACQ_CURSOR
  LOOP
  IP_COMM_INFO_LIST. EXTEND;
  IP_COMM_INFO_LIST (IP_COMM_INFO_LIST. (COUNTY): = PROD. TERMINAL_IP_COMM_INFO_OBJ (GET_ACQ_REC. HOST_DESCRIPTION);
  END LOOP;
  ON THE OTHER
  FOR GET_INFO_REC IN GET_INFO_CURSOR
  LOOP
  IP_COMM_INFO_LIST. EXTEND;
  IP_COMM_INFO_LIST (IP_COMM_INFO_LIST. (COUNTY): = PROD. TERMINAL_IP_COMM_INFO_OBJ (GET_INFO_REC. HOST_DESCRIPTION);
  END LOOP;
  END IF;

  RETURN IP_COMM_INFO_LIST;
  EXCEPTION WHEN OTHERS THEN
  LIFT;
  END GET_IP_COMM_INFO;

  ----------------------------------------------------------

  You try to access another variable of slider within the slider...

  CURSOR GET_ACQ_CURSOR IS

  SELECT H.DESCRIPTION AS HOST_DESCRIPTION

  PROD. HOST H, PROD. APP_IP_COMM_ACCESS_INFO AICAI, PROD. ACQUIRER_IP_COMM_ACCESS_INFO ACICAI

  WHERE (AICAI. HOST_ID = H.HOST_ID) and

  (AICAI. APPL_ID = vAPPL_ID) AND

  (ACQUIRER_ID = GET_ACQ_ID. ACQ_ID );

  But you have not opened this slider, or anything like that.

  You will probably need to pass as a parameter, just like a function:

  (not sure of the type of data, so I assumed that the NUMBER)

  CURSOR GET_ACQ_CURSOR (NUMBER in_acq_id) IS

  SELECT H.DESCRIPTION AS HOST_DESCRIPTION

  PROD. HOST H, PROD. APP_IP_COMM_ACCESS_INFO AICAI, PROD. ACQUIRER_IP_COMM_ACCESS_INFO ACICAI

  WHERE (AICAI. HOST_ID = H.HOST_ID) and

  (AICAI. APPL_ID = vAPPL_ID) AND

  (ACQUIRER_ID = in_acq_id );

  When you call this type, you must pass a value... So, it seems that you first call the other cursor.

  Change this code:

  IF Vvalue = ' 04 "THEN

  FOR GET_ACQ_REC IN GET_ACQ_CURSOR

  LOOP

  IP_COMM_INFO_LIST. EXTEND;

  IP_COMM_INFO_LIST (IP_COMM_INFO_LIST. (COUNTY): = PROD. TERMINAL_IP_COMM_INFO_OBJ (GET_ACQ_REC. HOST_DESCRIPTION);

  END LOOP;

  ON THE OTHER

  To do this:

  IF Vvalue = ' 04 "THEN

  FOR GET_ACQ_ID_REC IN GET_ACQ_ID IS

  LOOP

  FOR GET_ACQ_REC IN GET_ACQ_CURSOR (get_acq_id_rec.acq_id)

  LOOP

  IP_COMM_INFO_LIST. EXTEND;

  IP_COMM_INFO_LIST (IP_COMM_INFO_LIST. (COUNTY): = PROD. TERMINAL_IP_COMM_INFO_OBJ (GET_ACQ_REC. HOST_DESCRIPTION);

  END LOOP;

  END LOOP;

  ON THE OTHER

  (Or something like that)

  I wasn't sure if your GET_ACQ_ID cursor returns only 1 row or not? If it returns more than 1 row, how to cope, you do not specify.

  If it's just 1 row, then you can probably simplify it a little more:

  IF Vvalue = ' 04 "THEN

  SELECT ACQ_ID

  in l_acq_id

  TER TAHA, MERC M, PROF

  WHERE T.MER_ID = M.MER_ID

  AND M.PROFID = P.PROF_ID

  AND T.TER_ID = vTer_id;

  FOR GET_ACQ_REC IN GET_ACQ_CURSOR (l_acq_id)

  LOOP

  IP_COMM_INFO_LIST. EXTEND;

  IP_COMM_INFO_LIST (IP_COMM_INFO_LIST. (COUNTY): = PROD. TERMINAL_IP_COMM_INFO_OBJ (GET_ACQ_REC. HOST_DESCRIPTION);

  END LOOP;

  ON THE OTHER

  Hope that helps.

• PL/SQL: ORA-00904: "CONTAINS": invalid identifier

  create or replace
  PF_SEARCH PACKAGE BODY
  IS
  
  PROCEDURE PF_QUICK_SEARCH
  (
  Help keyword VARCHAR2 DEFAULT NULL,
  locale VARCHAR2 DEFAULT NULL,
  VARCHAR2 DEFAULT NULL, catalogue
  VARCHAR2 NULL by DEFAULT, price list
  minCount INTEGER by DEFAULT 5,
  maxCount INTEGER by DEFAULT 1000,
  searchCount OUT INTEGER,
  categorySet OUT cursorType,
  productSet OUT cursorType
  )
  
  AS
  
  BEGIN
  
  SELECT count (*)
  IN searchCount
  OF dcs_pf_product_trans t1,.
  dcs_prd_prdinfo t2,
  dcs_price t3
  WHERE t1.product_id = t3.product_id
  AND t3.price_list = price list
  AND t2.product_id = t1.product_id
  AND (((CONTAINS(t1.product_id,searchWord,0) > 0
  OR CONTAINS (t1.manufacturer_part_number, searchWord, 1) > 0
  OR CONTAINS(t1.vendor_name,searchWord,2) > 0
  OR CONTAINS(t1.display_name,searchWord,3) > 0
  OR CONTAINS(t1.long_description,searchWord,4) > 0)
  AND t2.catalog_id = catalog)
  AND (t1.locale_id = local));
  
  
  
  
  IF searchCount < = minCount THEN
  OPEN for ProductSet
  SELECT t1.product_id
  OF dcs_pf_product_trans t1,.
  dcs_prd_prdinfo t2,
  dcs_price t3
  WHERE t1.product_id = t3.product_id
  AND t3.price_list = price list
  AND t2.product_id = t1.product_id
  AND (((CONTAINS(t1.product_id,searchWord,0) > 0
  OR CONTAINS (t1.manufacturer_part_number, searchWord, 1) > 0
  OR CONTAINS(t1.vendor_name,searchWord,2) > 0
  OR CONTAINS(t1.display_name,searchWord,3) > 0
  OR CONTAINS(t1.long_description,searchWord,4) > 0)
  AND t2.catalog_id = catalog)
  AND (t1.locale_id = local));
  
  ON THE OTHER
  IF searchCount > maxCount THEN
  OPEN for CategorySet
  SELECT DISTINCT t3.cat_lvl1_id, t3.cat_lvl2_id, t3.cat_lvl3_id
  OF dcs_pf_product_trans t1,.
  dcs_prd_prdinfo t2,
  dcs_pf_search_cat t3,
  dcs_price t4
  WHERE t1.product_id = t4.product_id
  AND t4.price_list = price list
  AND t2.product_id = t1.product_id
  AND (((CONTAINS(t1.product_id,searchWord,0) > 0
  OR CONTAINS (t1.manufacturer_part_number, searchWord, 1) > 0
  OR CONTAINS(t1.vendor_name,searchWord,2) > 0
  OR CONTAINS(t1.display_name,searchWord,3) > 0
  OR CONTAINS(t1.long_description,searchWord,4) > 0)
  AND t2.catalog_id = catalog)
  AND (t1.locale_id = local))
  AND t2.product_info_id = t3.product_info_id
  ORDER BY t3.cat_lvl1_id, t3.cat_lvl2_id, t3.cat_lvl3_id;
  
  ON THE OTHER
  
  OPEN for CategorySet
  SELECT DISTINCT t3.cat_lvl1_id, t3.cat_lvl2_id, t3.cat_lvl3_id
  OF dcs_pf_product_trans t1,.
  dcs_prd_prdinfo t2,
  dcs_pf_search_cat t3,
  dcs_price t4
  WHERE t1.product_id = t4.product_id
  AND t4.price_list = price list
  AND t2.product_id = t1.product_id
  AND (((CONTAINS(t1.product_id,searchWord,0) > 0
  OR CONTAINS (t1.manufacturer_part_number, searchWord, 1) > 0
  OR CONTAINS(t1.vendor_name,searchWord,2) > 0
  OR CONTAINS(t1.display_name,searchWord,3) > 0
  OR CONTAINS(t1.long_description,searchWord,4) > 0)
  AND t2.catalog_id = catalog)
  AND (t1.locale_id = local))
  AND t2.product_info_id = t3.product_info_id
  ORDER BY t3.cat_lvl1_id, t3.cat_lvl2_id, t3.cat_lvl3_id;
  
  
  OPEN for ProductSet
  SELECT t1.product_id
  OF dcs_pf_product_trans t1,.
  dcs_prd_prdinfo t2,
  dcs_price t3
  WHERE t1.product_id = t3.product_id
  AND t3.price_list = price list
  AND t2.product_id = t1.product_id
  AND (((CONTAINS(t1.product_id,searchWord,0) > 0
  OR CONTAINS (t1.manufacturer_part_number, searchWord, 1) > 0
  OR CONTAINS(t1.vendor_name,searchWord,2) > 0
  OR CONTAINS(t1.display_name,searchWord,3) > 0
  OR CONTAINS(t1.long_description,searchWord,4) > 0)
  AND t2.catalog_id = catalog)
  AND (t1.locale_id = local));
  
  END IF;
  END IF;
  
  END PF_QUICK_SEARCH;
  
  PROCEDURE PF_CATEGORY_SEARCH
  (
  Help keyword VARCHAR2 DEFAULT NULL,
  locale VARCHAR2 DEFAULT NULL,
  VARCHAR2 DEFAULT NULL, catalogue
  VARCHAR2 NULL by DEFAULT, price list
  parentCat VARCHAR2 DEFAULT NULL,
  productSet OUT cursorType
  )
  
  AS
  
  BEGIN
  
  OPEN for ProductSet
  SELECT t4.product_id
  OF dcs_pf_product_trans t1,.
  dcs_prd_prdinfo t2,
  dcs_price t3,
  dcs_product t4
  WHERE t1.product_id = t3.product_id
  AND t3.price_list = price list
  AND t2.product_id = t1.product_id
  AND (((CONTAINS(t1.product_id,searchWord,0) > 0
  OR CONTAINS (t1.manufacturer_part_number, searchWord, 1) > 0
  OR CONTAINS(t1.vendor_name,searchWord,2) > 0
  OR CONTAINS(t1.display_name,searchWord,3) > 0
  OR CONTAINS(t1.long_description,searchWord,4) > 0)
  AND t2.catalog_id = catalog)
  AND (t1.locale_id = local))
  AND t1.product_id = t4.product_id
  AND t4.parent_cat_id = parentCat;
  
  
  END PF_CATEGORY_SEARCH;
  
  PROCEDURE PF_GENERIC_FULL_SEARCH
  (
  SQLQuery VARCHAR2 DEFAULT NULL,
  sqlCountQuery VARCHAR2 DEFAULT NULL,
  categoryQuery VARCHAR2 DEFAULT NULL,
  minCount INTEGER by DEFAULT 5,
  maxCount INTEGER by DEFAULT 1000,
  count ON the WHOLE,
  countSet OUT cursorType,
  categorySet OUT cursorType,
  productSet OUT cursorType
  )
  AS
  
  searchCount INTEGER.
  
  BEGIN
  
  CountSet OPEN for sqlCountQuery;
  SEEK countSet INTO searchCount;
  County: = searchCount;
  
  IF searchCount < = minCount THEN
  ProductSet OPEN for sqlquery;
  ON THE OTHER
  IF searchCount > maxCount THEN
  CategorySet OPEN for categoryQuery;
  ON THE OTHER
  CategorySet OPEN for categoryQuery;
  ProductSet OPEN for sqlquery;
  END IF;
  END IF;
  
  END PF_GENERIC_FULL_SEARCH;
  
  PROCEDURE PF_GENERIC_PROD_SEARCH
  (
  SQLQuery VARCHAR2 DEFAULT NULL,
  productSet OUT cursorType
  )
  
  AS
  BEGIN
  ProductSet OPEN for sqlquery;
  
  END PF_GENERIC_PROD_SEARCH;
  
  END PF_SEARCH;
  ----------------------------------------
  
  Package body PFCA4. PF_SEARCH@US_DEV_WD1_PFCA4
  Error (22.2): PL/SQL: statement ignored
  Error (34.5): PL/SQL: ORA-00904: "CONTAINS": invalid identifier
  Error (43.5): PL/SQL: statement ignored
  Error (54.5): PL/SQL: ORA-00904: "CONTAINS": invalid identifier
  Error (61.7): PL/SQL: statement ignored
  Error (73,14): PL/SQL: ORA-00904: "CONTAINS": invalid identifier
  Error (82.7): PL/SQL: statement ignored
  Error (94,14): PL/SQL: ORA-00904: "CONTAINS": invalid identifier
  Error (102.6): PL/SQL: statement ignored
  Error (113.5): PL/SQL: ORA-00904: "CONTAINS": invalid identifier
  Error (137,5): PL/SQL: statement ignored
  Error (149,5): PL/SQL: ORA-00904: "CONTAINS": invalid identifier
  ---------------

  Think you that trying to do something like that?

  CONTAINS(t1.manufacturer_part_number,searchWord,1) > 0
  

  How would you do the same thing with INSTR or SIMILAR?

  select * from dual where instr('Test','st') > 0;
  select * from dual where 'ABCXD' like '%' || dummy || '%';
  

• PL/SQL: ORA-00904: invalid identifier

  Hello

  Run the script after and encountered the error.

  SQL > create or replace FUNCTION p_CQTicketUsu

  () 2

  3 v_TicketUserID IN NUMBER by DEFAULT NULL,-it's the [CQTicketUsers]. TicketUserID generated on update

  4 v_TicketID IN NUMBER by DEFAULT NULL,-it's the [CQTicketUsers]. TicketID update

  5 v_AdminUserID IN NUMBER by DEFAULT NULL,-it's the [CQTicketUsers]. AdminUserID update

  6 v_TicketUserTypeID IN NUMBER by DEFAULT NULL - this is the [CQTicketUsers]. TicketUserTypeID update

  7)

  8 RETURN NUMBER

  9, ACCORDING TO

  10 v_sys_error NUMBER: = 0;

  11 v_ERRSQL NUMBER (10,0);

  12 v_UpdCount NUMBER (10,0);

  13

  BEGIN 14

  15

  16 UPDATE CQTicketUsers

  17 SET v_TicketUserID = TicketUserID,

  18 v_TicketID = TicketID,

  19 v_AdminUserID = AdminUserID,

  20 v_TicketUserTypeID = TicketUserTypeID

  21 WHERE TicketUserID = v_TicketUserID;

  22 v_ErrSQl: = v_sys_error;

  23 v_UpdCount: = SQL % ROWCOUNT;

  24 IF v_ErrSQL <>0 THEN

  25 RETURN-1;

  26 END IF;

  27 IF v_Updcount < 1 THEN

  28 RETURN - 2;

  29 END IF;

  30 RETURN 0;

  ENDS 31;

  32.

  WARNING: Function created with compilation errors.

  SQL > show error

  Errors for the P_CQTICKETUSU FUNCTION:

  16/4 PL/SQL: statement ignored

  20/11 PL/SQL: ORA-00904: "V_TICKETUSERTYPEID": invalid identifier

  Please note, I said v_TicketUserTypeID to the #6 line. Advice kindly.

  Kind regards

  Ballanger

  It's going to be kind of embarrassing, but you have the update parameters reversed. It should be

  TicketUserTypeID = v_TicketUserTypeID

  and is not

  v_TicketUserTypeID = TicketUserTypeID

  You get this error for database columns not only for pl/sql variables.

• PL/SQL: ORA-00904: invalid identifier (DG4ODBC 11.2.0.2 &amp; MySQL)

  I have a PL/SQL script, processing of information between Oracle and MySQL databases. My script runs perfectly with DG4ODBC 11.1.0.7. Then we went from Oracle 10.2.0 and 11.2.0.2 DG4ODBC. Now, if I run my script from command line Solaris love. / myscript.shl, I get the following errors:

  PL/SQL: ORA-00904: "cmswhit_moodle1." "" "" mdl_grade_grades "." finalgrade ": invalid identifier.

  PL/SQL: ORA-00904: "cmswhit_moodle1." "" "" mdl_question_states '. "the attempt": invalid identifier "

  The strange thing is that if I run the same query by cut and paste in sqlplus command line, the application works perfectly without any problems.

  What is the cause of this problem?

  Any help would be greatly appreciated.

  Jeffrey

  Hi Klaus,

  The problem has been resolved after I upgraded MySQL ODBC to a new version of 5.1.8 to 5.1.13.

  Summary of the problem and its solution:

  The problem: It seems that dg4odbc 11.2.0.2 requires a newer version of MyODBC. Previously, I used MyODBC 5.1.8, which ran into problems with dg4odbc 11.20.0.2.

  The Solution: After that I upgraded 5.1.13 MyODBC, my PL/SQL scripts all work.

  I need to point out that with that MyODBC 5.1.8, I can run queries and updates to SQL * more console, but now the PL/SQL scripts.

  I'm going to close this message.

  Once again, thank you and happy holidays.

  Jeffrey

• PL/SQL error ORA-00904 not no projection in Oracle SQL Developer

  Hello
  
  I am new to Oracle and the different development tools available.
  Using Oracle SQL Developer, we encountered a scenario where a PL/SQL package doesn't compile, but it only displays the warnings in the log of the compiler.
  
  The packeage even when it is compiled using PL/SQL Navigator shows a much more detailed list of errors and highlights the real problem.
  
  Why Oracle SQL Developer does not show the following error?
  
  PL/SQL: ORA-00904: "SERIAL_LINE_ID": invalid identifier
  
  
  
  
  Concerning
  Adrian

  There are various settings that you can give to messages. (for example, information, warning, severe).

  Tools-PL/SQL compiler options.

  Normally, just the first 20 messages are displayed.
  Change the code to get rid of the warning messages or change settings to ignore the information and warning messages.

  P.S. There is a dedicated forum sqldeveloper where your question should really be displayed.

  Published by: Keith Jamieson on March 9, 2009 13:45

• Search and apply reception error: ORA-00904: "ON_ACCT_PO_NUM": not valid

  Hello
  
  We get an error when you try to apply revenues, ORA-00904: "ON_ACCT_PO_NUM": invalid identifier. Found some Metalink:
  
  Find and apply functionality Arxrwmai filled with ORA-00904: error "ON_ACCT_PO_NUM" [388202.1 ID]
  ARXRWMAI: ORA-00904: "On_acct_po_num": invalid identifier, applying the reception [564612.1 ID]
  ARP_PROCESS_APPLICATION is not valid - PLS-00302: component 'ON_ACCT_CUST_ID' must be declared [577194.1 ID]
  
  Basically all suggest that the columns (IE ON_ACCT_PO_NUM) are missing in AR_RECEIVABLE_APPLICATIONS. Check these tables and columns are actually there, however, I ran SQL > @$AR_TOP/patch/115/sql/arvrrapp.sql (the version is 115.26.15104.3). And re-tested, always a problem. Audit to verify what patches have been applied recently that could cause this.
  
  RDBMS: 11.2.0.1.0
  Oracle Applications: 11.5.10.2
  
  Thank you
  -Steve

  Hi steve;

  Check use select * ad_bugs and check patch that applied using the applied date column

  * PS: patch 5359197 is exist on your server that is mentioned on the research and apply feature Arxrwmai ends with ORA-00904: error "ON_ACCT_PO_NUM" [388202.1 ID] *.

  Respect of
  HELIOS

• Process page returns ORA-06550: error

  APEX 4.1

  Oracle 11g

  Analysis of schema: MDM_APEX

  Data tables: MDM_DATA

  Creating a page process to take several pieces of an item in the list and insert it into a table.

  I use a function that works in the database (when it is called by SQL + and the toad) but get the following error message when you try to create the page APEX process:

  1 error has occurred

  ORA-06550: line 3, column 22: PL/SQL: ORA-00904: "UTIL". ' ' SPLIT ': invalid identifier ORA-06550: line 2, column 1: PL/SQL: statement ignored

  I have granted running the privs to APEX_040100 and MDM_APEX on the packaging. This function works in another application, but not to recognize in this application.

  Google search finds no solutions used for this question with regard to APEX. Suggestions on how to recognize the function of the APEX?

  
  

  Thank you

  Tim
  

  
  

  < code >

  Process page:
  

  INSERT INTO MDM_DATA. REF_CMR (STORE_CD)

  (SELECT * FROM TABLE (UTIL.) SPLIT (:P400_STORE_LIST,':')));

  < code >

  < code >

  CREATE OR REPLACE PACKAGE MDM_DATA. UTIL

  AS

  SPLIT FUNCTION (P_LIST VARCHAR2, P_DEL VARCHAR2: = ',') SPLIT_TBL RETURN PIPELINE;

  Etc...

  End UTIL;

  CREATE OR REPLACE PACKAGE BODY MDM_DATA. UTIL

  AS

  SPLIT FUNCTION (P_LIST VARCHAR2, P_DEL VARCHAR2: = ',') SPLIT_TBL RETURN PIPELINE

  AS

  L_IDX PLS_INTEGER;

  L_LIST VARCHAR2 (32767): = P_LIST;

  L_VALUE VARCHAR2 (32767).

  BEGIN

  LOOP

  L_IDX: = INSTR (L_LIST, P_DEL);

  IF L_IDX > 0

  THEN

  LINE OF CONDUCT (SUBSTR (L_LIST, 1, L_IDX - 1));

  L_LIST: = SUBSTR (L_LIST, L_IDX + LENGTH (P_DEL));

  ON THE OTHER

  PIPE ROW (L_LIST);

  EXIT;

  END IF;

  END LOOP;

  RETURN;

  EXCEPTION

  WHILE OTHERS THEN

  NULL;

  END SPLIT;

  
  

  ETC...

  End util;
  

  < code >

  INSERT INTO MDM_DATA. REF_CMR (STORE_CD)

  (SELECT * FROM TABLE (MDM_DATA. )) UTIL. SPLIT (:P400_STORE_LIST,':')));

• ORA-00904: invalid identifier

  Hi all

  I'm getting ORA-00904: "SNO_T": invalid identifier will be done in this example. Please let me know where I have error.

  create table t4(name varchar2(22),sno number);
  
  
  insert into t4 values('suman2',2);
  insert into t4 values('suman',1);
  
  create or replace type t4_t as object(
   name_t  varchar2(22),
   sno_t   number
   );
  
  
  create or replace type t4_m is table of t4_t;
  
  
  /
  declare
   l_toys t4_m;
   l1     pls_integer;
  begin
   select t4_t(name_t,sno_t)  
    bulk collect into l_toys
    from t4;
  -- DBMS_OUTPUT.PUT_line(l_toys.count);
  
   select count(*) into l1 from t4;
  
  
  DBMS_OUTPUT.PUT_line(l1);
  
  
  end;
  
  Error report -
  ORA-06550: line 5, column 21:
  PL/SQL: ORA-00904: "SNO_T": invalid identifier
  ORA-06550: line 5, column 2:
  PL/SQL: SQL Statement ignored
  06550. 00000 -  "line %s, column %s:\n%s"
  *Cause:    Usually a PL/SQL compilation error.
  *Action:
  

  Select t4_t (name_t, sno_t)

  bulk collect into l_toys

  T4;

  the columns in your table are called name and sno, so you must use these names in your select statement

  t4_t is the manufacturer that expects two values (a string and a number) and having built an object, you will be able to access the object by using object_name.sno_t, but do not all by building this...

  HTH

• ORA-00904 PLS-00364: loop index variable

  Hi all

  create the table xxc_cust_id (cust_id number);

  insert into xxc_cust_id values (1)

  create table xxc_child (id number, part varchar2 (20), amount number);

  insert into xxc_child values (1, "Replaced processor", 1500)

  insert into xxc_child values (1, 'Replaced mouse', 200)

  insert into xxc_child values (' 6, ' mouse replaced ', 200)

  create table xxc_parent (ID, cust_id varchar2 (10));

  insert into xxc_parent values (1,1)

  insert into xxc_parent values (6.1)

  Select * from xxc_parent

  ID CUST_ID

  --------- ----------

  1 1

  6 1

  Select * from xxc_child

  AMOUNT OF PART ID

  -------- -------------------- ----------

  1 processor replaced 1500

  1 mouse replaced 200

  6 mouse replaced 200

  Select * from xxc_cust_id

  CUST_ID

  --------

  1

  I need

  CUST_ID PLATE

  --------                ----------

  1                     1900

  to insert data into the table xxc_details

  CREATE OR REPLACE PROCEDURE XXC_SUM_DETAILS

  IS

  CURSOR c_1

  IS

  SELECT Cust_id

  OF xxc_cust_id

  ORDER BY cust_id.

  CURSOR c1

  IS

  SELECT a.cust_id, SUM (sum) total_sum

  Xxc_parent a, xxc_child b

  WHERE a.id = b.id

  AND cust_id = c_cust_id.cust_id

  GROUP BY a.cust_id;

  BEGIN

  FOR c_cust_id IN c_1

  LOOP

  dbms_output.put_line ('Enter');

  C_rec IN C1

  LOOP

  BEGIN

  INSERT INTO xxc_details (part_id, total_amount)

  VALUES (c_rec.cust_id, c_rec.total_sum);

  COMMIT;

  END;

  END LOOP;

  END LOOP;

  END;

  LINE/COL ERROR

  -------- -----------------------------------------------------------------

  10/9 PL/SQL: statement ignored

  12/42 PL/SQL: ORA-00904: "C_CUST_ID." "" Cust_id ": invalid identifier

  21/13 PL/SQL: statement ignored

  22/41 PLS-00364: 'C_REC' use the loop index variable is not valid

  22/47 PL/SQL: ORA-00984: column not allowed here

  In this case you cannot include the sequence directly in the GROUP BY in the query part, that you can group on sequences or the aggregated.

  He must ignore the sequence to a higher level, the group so that it is assigned to each row that will be inserted in the sub-sub-group by query to...

  INSERT INTO xxc_details (details_id, cust_id, total_amount, CONTRACT_NUMBER)

  Select DETAILS_ID_SEQ. NEXTVAL

  cust_id

  total_sum

  quantity

  from (select a.cust_id,

  Total_sum SUM (b.amount),

  d.amount

  Xxc_parent a.,

  b xxc_child,

  xxc_cust_id c,

  xxc_sum_acc d

  where a.id = b.id

  and c.cust_id = a.cust_id

  and c.cust_id = d.cust_id

  AND contract_type = 'AML.

  and not exists (select 1

  of e xxc_details

  where c.cust_id = e.cust_id

  )

  GROUP BY a.cust_id, d.amount

  );

• ORA-00904: "I." "" PROCESS_FLAG ": invalid identifier - I is a var slider

  create or replace PROCEDURE validate_data_proc
  IS
  
  CURSOR c1
  IS
  SELECT itemname, ICT, msib mtl_system_items_b item_conv_tab_sv itemname1 msib.segment1 icts.item_name
  where icts.item_name! = msib.segment1;
  CURSOR c2
  IS
  SELECT TIC. Nom_element itemname, icts.ORGANIZATION_ID org, msib.segment1 itemname1, msib.organization_id the item_conv_tab_sv ICT, msib mtl_system_items_b org1
  where icts.organization_id = msib.organization_id and icts.item_name! = msib.segment1;
  
  BEGIN
  
  I'm IN c1
  LOOP
  -Select i.item_name from i in
  If (c1% notfound) then
  FOR r IN c2
  LOOP
  If (c2% notfound) then
  
  update of HCCI process_flag = 3 set item_conv_tab_sv where item_conv_tab_sv.item_name = r.item_name;
  on the other
  
  update of item_conv_tab_sv HCCI set process_flag = 1 where item_conv_tab_sv.item_name = r.item_name;
  end if;
  end loop;
  on the other
  update of HCCI process_flag = 3 set item_conv_tab_sv where item_conv_tab_sv.item_name = i.item_name;
  end if;
  COMMIT;
  end loop;
  
  
  
  
  END validate_data_proc;
  
  
  I use a cursor nested which I create that err
  I get the foll error message,
  
  Error (23.30): PL/SQL: statement ignored
  Error (23,116): PL/SQL: ORA-00904: 'R '. "" Nom_element ": invalid identifier
  Error (23,118): PLS-00302: component 'Nom_élément' must be declared
  Error (26,32): PL/SQL: statement ignored
  Error (26,109): PL/SQL: ORA-00904: 'R '. "" PROCESS_FLAG ": invalid identifier
  Error (26,111): PLS-00302: component 'PROCESS_FLAG' must be declared
  Error (30,31): PL/SQL: statement ignored
  Error (30,108): PL/SQL: ORA-00904: "I." "" PROCESS_FLAG ": invalid identifier
  Error (30,110): PLS-00302: component 'PROCESS_FLAG' must be declared
  Error (26,118): PL/SQL: ORA-00904: 'R '. "" Nom_element ": invalid identifier
  Error (26,120): PLS-00302: component 'Nom_élément' must be declared
  Error (30,117): PL/SQL: ORA-00904: "I." "" Nom_element ": invalid identifier
  Error (30,119): PLS-00302: component 'Nom_élément' must be declared
  
  
  someone... Help, please...

  Find a difference:

  CURSOR c1
  IS
  SELECT icts.item_name itemname , msib.segment1 itemname1 of the item_conv_tab_sv ICT, mtl_system_items_b msib
  where icts.item_name! = msib.segment1;
  CURSOR c2
  IS
  SELECT TIC. Nom_element itemname, icts.ORGANIZATION_ID org, msib.segment1 itemname1, msib.organization_id item_conv_tab_sv cts, mtl_system_items_b msib org1
  where icts.organization_id = msib.organization_id and icts.item_name! = msib.segment1;

  And:

  update of HCCI process_flag = 3 set item_conv_tab_sv where item_conv_tab_sv.item_name = rnom_element;
  Update item_conv_tab_sv set process_flag icss = 3 where item_conv_tab_sv.item_name = i.nom_element;

  But even in this case, your code is wrong for CURSOR loop retrieves a line and stops automatically when there is no lines. Therefore, there is no sense to check notfound % c1 inside the loop for the SLIDER - this will be always FALSE. If your interior for CURSOR LOOP (C2) will never run.

  SY.

• Oracle on the SQL Server tables dblinked query error ORA-00904

  Hello
  
  I created a dblink to a SQL from Oracle database using generic connectivity.
  The following query returns the error ORA-00904 invalid identifier in the (tblEmp.Empno) WHERE clause
  
  SELECT 'EmpNo', "EmpName", "DeptName".
  OF tblEmp@sqlserver.
  tblDept@sqlserver
  WHERE tblDept.DeptNo = tblEmp.Empno
  
  I had to include the column names between double quotes because of the case review of the columns, but I can't do the
  same thing for the WHERE clause.
  
  (1) so how can I fix this error?
  (2) also how can I include the Deptno column with the table alias in the columns list?
  (Deptno is ambiguous in the Emp and Dept tables)
  
  Kind regards
  Sam

  Looks like you have case-sensitive column names, try this

  SELECT "EmpNo","EmpName", "DeptName"
  FROM tblEmp@sqlserver e,
  tblDept@sqlserver d
  WHERE d."DeptNo" = e."Empno" --<--- are you sure this is the correct join condition
  

  What should we not

  WHERE d."DeptNo" = e."DeptNo"
  

  Published by: Alex Nuijten on September 22, 2009 13:28

• SQL Error: Invalid identifier ORA-00904

  Hello

  The Version of SQL Developer: 11g

  Two tables: nav_vendors (source), vendor (destination)

  Both having 16 'Same' columns (data will differ for some records of... for some data records are same to check the process DML works according to the need).

  I'm trying to insert update and delete using merge operation

  I m getting error below whenever I tried to merge them. All column names are the same in the table.

  SQL error: ORA-00904: "S". "" COMPANY_CODE ": invalid identifier

  SQL:

  MERGE INTO s source

  USING (nvl (d.VENDOR, s.VENDOR) selection of the SELLER,

  NVL (d.Name, s.Name) NAME.

  NVL (d.NAME3, s.NAME3) Name3,

  NVL (d.ADDRESS1, s.ADDRESS1) address1.

  NVL (d.DISTRICT, s.DISTRICT) DISTRICT.

  NVL (d.CITY, s.CITY), CITY,

  NVL (d.Country, s.Country) COUNTRIES.

  NVL (d.Postcode, s.Postcode) ZIP Code,

  NVL (d.TELEPHONE, s.TELEPHONE), PHONE,.

  NVL (d.Fax, s.Fax) FAX.

  NVL (d.contact, s.contact) CONTACT.

  NVL (d.URL, s.URL) URL.

  NVL (d.email, s.email) EMAIL.

  NVL (d.DELIVERY_TOLERANCE, s.DELIVERY_TOLERANCE) DELIVERY_TOLERANCE.

  NVL (d.EXCLUDE_REWORK_TEXT, s.EXCLUDE_REWORK_TEXT) EXCLUDE_REWORK_TEXT.

  NVL (d.COMPANY_CODE, s.COMPANY_CODE) COMPANY_CODE.

  (case

  When ((d.VENDOR = s.VENDOR)

  and (d.NAME = s.NAME)

  and (d.NAME3 = s.NAME3)

  and (d.ADDRESS1 = s.ADDRESS1)

  and (d.DISTRICT = s.DISTRICT)

  and (d.CITY = s.CITY)

  and (d.COUNTRY = s.COUNTRY)

  and (d.POSTCODE = s.POSTCODE)

  and (d.TELEPHONE = s.TELEPHONE)

  and (d.FAX = s.FAX)

  and (d.CONTACT = s.CONTACT)

  and (d.URL = s.URL)

  and (d.EMAIL = s.EMAIL)

  and (d.DELIVERY_TOLERANCE = s.DELIVERY_TOLERANCE)

  and (d.EXCLUDE_REWORK_TEXT = s.EXCLUDE_REWORK_TEXT)

  and (d.COMPANY_CODE = s.COMPANY_CODE))

  then "correspondence".

  When d.COMPANY_CODE is null

  then 'DELETE '.

  When s.COMPANY_CODE is null

  then "INSERT."

  on the other

  "no match."

  chck end)

  of s nav_vendorz

  full outer join of the seller d

  On(d.COMPANY_CODE=s.COMPANY_CODE)

  ) d

  (S.COMPANY_CODE = d.COMPANY_CODE AND (in d.chck ("not matched", 'match', 'DELETE')))

  WHEN MATCHED THEN

  ->UPDATE SET s.company_code = d.company_code <-error line

  WHERE in d.chck ("not matched", "DELETE")

  DELETE WHERE d.chck = 'DELETE '.

  WHEN NOT MATCHED THEN

  INSERT (VENDOR, NAME, ADDRESS1, NAME3, NEIGHBORHOOD, CITY, COUNTRY, CODE POSTAL, PHONE, FAX, CONTACT, URL, EMAIL, DELIVERY_TOLERANCE, EXCLUDE_REWORK_TEXT, COMPANY_CODE)

  VALUES

  (d.VENDOR, d.NAME, d.NAME3, d.ADDRESS1, d.DISTRICT, d.CITY, d.COUNTRY, d.POSTCODE, d.TELEPHONE, d.FAX, d.CONTACT, d.URL, d.EMAIL, d.DELIVERY_TOLERANCE,d.EXCLUDE_REWORK_TEXT,d.COMPANY_CODE);/

  (1) use different alias names

  (2) do not try to update a column that is used to 'ON' clause.

• [Error code: 904, SQL State: 42000] ORA-00904: "G". "' NAME ': invalid

  When I run the SQL below, I get the following:
  
  08:00:08 [SELECT - 0 row (s), dry 0.000] [error Code: 904, SQL State: 42000] ORA-00904: "G". "" NAME ": invalid identifier
  
  When I comment the lines "BOLD", it works fine. I tried to fully qualify the column without success. I'm sure it's a matter of formatting.
  
  ************************************************
  
  Select
  SR. SCHOOLID,
  SR. StudentID, sr.coursenumber,
  SR. REGISTREQ_ID,
  (select
  min (rr.ID |) » -'|| URI COURSEGROUP)
  Of
  REGISTREQ rr
  where
  RR.grade_level = (select s.sched_nextyeargrade from student s where s.id = sr.studentid)
  and rr.yearid = 2100
  and rr.id not in (6426,6415)
  and rr. COURSEGROUP in
  (select
  g.Name
  Of
  g GEN
  where
  g.CAT = "coursegroups".
  and instr (g.valuet, sr.coursenumber) > 0
  and g.schoolid = sr.schoolid)
  and ((g.name as 'ALT %' and sr. GLOBALALTERNATECOURSE = 1)
  or (g.name not as 'ALT %' and sr. GLOBALALTERNATECOURSE = 0))
  ) as New_RegID
  Of
  SCHEDULEREQUESTS sr
  where
  SR. SCHOOLID = 703
  and sr.yearid = 2100

  This is because the lines that you have Ringing are out of reach for the alias 'g', which is part of the inner query.

  Maybe you want to just 'name' without the prefix "g.".