How to catch the error in 1843. .nOT months valid...

Similar Questions

• "the local site folder" field adds------and emits the error that / is not a valid path component

  Attempt to create a new Site, new service Site guest fields for the Site name and Site Local folder.  However, the first time I filled these fields I ended up accidentally a URL with the-character.  Now, whenever I try to fill these fields with the correct URL the DW application adds that-until the end of the field Site Local file and then issues an error message / (Yes, not the same character) is not a valid path component.  I deleted the WinFileCache*.dat file, deleted Internet Explorer saved files and restarted the computer, but the error persists.  Any ideas short of reinstalling DW?

  First of all, I would like to back in Nancy on (almost) all aspects of DreamWeaver! She has the knowledge and experience that I can only aspire to.

  But let me remind you that it is useless to "Set" your sites in order to use DW! DreamWeaver works just plain file with the previous folder/file structure of your machines operating system.

  At one point, I got maybe about 20 active sites running and I use DW to edit and update ALL the. I defined sites... ZERO!

  OK, I'm out of the closet! I am a user of non-traditional DW!

  As I use it, I don't really know the benefits of 'set' a site. Everything that DW can do by defining a site can also be done otherwise.

  So please don't feel that just because you have problems, define a site, that DW can work for you.

  DW can open and edit files on any drive on your computer. DW can bind to any other file on your computer with the "Point to File" function in the properties panel (images, Web pages, etc.).

  And for the FTP, I suggest you a true FTP program, such as Filezilla or SmartFTP... stronger and more versatile than the built in FTP of DW!

  So if for some reason, you feel that you need to "Set" your sites... go!

  But also realize that the 'Definition' of a site is not required to take advantage of the majority of the DW.

  Best wishes

  Adninjastrator

• How to catch the error in time-out in BEPL

  Hi, I am building some SOA BPEL to call another SOAP service that may treat the time quite a long time. In this case, SOA BPEL fails with ErrorCode ORAMED-03303. In order to ensure the completion of the entire BPEL process, I tried to add a CatchAll to intercept this error. But FAILED. The BEPL still does not with ORAMED-03303. Can someone help me on this? Thank you.

  Hi Lisoft,

  You might see these errors because of the long running process. There are several places where you have to fine-tune the settings of time-out.

  The first thing you should look into is the MBean timeout "SyncMaxWaitTime" which is set by default at 45 seconds. (Connect on SOA EM > SOA > click right on soa-infra > Administration SOA > BPEL properties > more BPEL properties > SyncMaxWaitTime). You then have to check what the JTA transaction time-out set for the instance of weblogic (connect on the SOA console-> click-> JTA field).

  You can control the time-out settings max on a composite level using "oracle.webservices.httpReadTimeout" and "oracle.webservices.httpConnTimeout" binding properties. These values configured in the composite must be less than the value of the "SyncMaxWaitTime" for synchronous processes.

  If you use the properties mentioned above for your Web service reference, then you could catch the fault of "timeout" in your composite. The binding reference might look like below in the file composite.xml.

  UI:wsdlLocation = "TestService.wsdl" > "

  http://xmlns.Oracle.com/SOATestWSService/TestWSService/bpelTestWSService#WSDL.interface (bpelTestWSService)"/ >

  http://xmlns.Oracle.com/SOATestWSService/TestWSService/bpelTestWSService#WSDL.EndPoint(TestWSService_ep/bpelTestWSService_pt)"

  location =""

  soapVersion = "1.1" >

  much = 'false' override = "may" > 10000

       

  much = 'false' override = "may" > 10000

  much = 'false' override = "may" > false

  Hope the link below could be very useful for you.

  http://soasol.blogspot.com/2009/12/how-to-set-timeout-for-Web-service-in.html

  https://technology.AMIS.nl/2011/11/18/timeouts-in-Oracle-SOA-Suite-11g/

  It will be useful.

• How to resolve the error: "lightroom could not import this catalog due to an unknown error" during an attempt of "import catalog?

  I have about 400 000 pictures of so given the high number of 15 years, I had all my photos in 6 catalogues to avoid potential problems. All photos and catalogs are in a 4 TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.

  I wanted to have a NEW catalogue of all my rated 1 star + photos of all years in a single catalog. So I created this I called Catalog + Star and told me the best option is to import a catalog at a time, and because there is no way to filter import them just photos now, I would like to import all the photos and then delete all the photos of UnStared. I did for the catalog of the year 2014, but in the end gave me the message: "lightroom could not import this catalog because of an unknown error. He had in fact imported about 40 k pictures of about 50 k total. I tried again and again and each time I end up with the same thing. I created a new another catalog and looked from scratch and the same ting happened: EXACT 40 k photos or JUST have been imported and others were not! When I imported catalog year 2013 of about 45 photos of k, it worked perfectly. But when I imported catalog year 2012 35 k photos, it's the same thing!

  All the tips: 1) on how to solve this problem? and (2) if there is a way better and easier to create this main catalog of all looked at them Photos of all my catalogs?

  Okay, my starting point is that LR can contain fortunately 400000 + photos, and it's a mistake to create a 1 star and catalogue as you suggest. Instead, I would recommend that you create a master catalog of all your photos, you can then question however you want - 2 stars, or a certain keyword, or with "xyz" in the title, etc.

  If you are intent on going this way, you could try a slight change in what you have done so far. Instead of trying to import a complete catalogue and then delete photos of TSE, take the 2012 and 2014 catalogs and select only the photos 1 star. Then to Export in the catalog for these items and import the 2014-1star and 2012-1star in your new catalog. Can pass the problem images that I think are the problem.

  If this does not work, or if you follow my initial advice, you're going to need identify the image where the failure occurs. You may have a corrupted image file, and replacement of your backup can be enough to solve the problem. Alternatively, it may be a corrupted in the catalog folder, and in this case, it may be sufficient to remove the image from the catalog and import it again. You can try to select everything in the catalog of 2014 and see if you can do an export as catalog, creating a 2014 clean and delete file previews of 2014 could also get rid of a potential problem. Another thing is to try exporting in the catalog for images 1-40000, then a second export as catalog images 40002 - 50 k.

  So a few things that you need to try, rather than a magic bullet and a recommendation to change the underlying meaning.

  John

• Can someone please tell me how to fix the error 1682 ' could not complete the installation

  I'm just trying to uninstall a game and then it gives me this error

  Have you tried Revo Uninstaller: http://www.revouninstaller.com/revo_uninstaller_free_download.html

  J W Stuart: http://www.pagestart.com

• Setup error: (E:\ is not a valid Win32 application)

  I am trying to install Windows 7 on my Windows XP computer.  I inserted the disc of windows 7 in the DVD player and get the error E:\ is not a valid Win32 application.  How can I solve this problem?

  You are running 32 bit XP and try to install Windows 7 64-bit? If so, you must restart and boot from the DVD.

  Installation custom own steps

  Time to use:
  Or the transition from XP to 7, not supported in place upgrade paths (ex: Vista Home Pro 7)
  Move Windows to a 64-bit system from a 32-bit system or change languages
  Don't want to make a room upgrade, or if you want a fresh install / clean

  You can use a Full Windows 7 or upgrade disk to do a custom clean install. This will remove all of your programs, but you can save your files and settings on an external storage before doing so. You will need to reinstall all your programs after installing Windows 7. Here are the steps:

  1. start Windows Upgrade Advisor to see if there are known problems that might affect installation and if you can install the 32-bit or the 64 bit version of Windows 7.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2. backup all your files and settings to avoid losing documents, photos and other information. Windows Easy Transfer is a free tool to copy files (not programs) from your PC and then transfer back after installation of Windows 7. If you don't want to use Windows Easy Transfer, you can copy your files to a Flash DRIVE or CD/DVD. Note: The easy transfer will not work when changing languages, or when moving from 64 bit to 32 bit (it will work ranging from 32-bit to 64-bit).
  http://Windows.Microsoft.com/Windows-easy-transfer

  3. find the discs installation and license/product associated to all your programs keys, because you have to manually reinstall all programs. If you have downloaded some Internet programs you can redownload them.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation do you want?" click "Custom (advanced)." Note: 32 to 64-bit requires you to restart and boot from the DVD.
    
  5. when Windows 7 is installed, you can use Windows Easy Transfer (or a different backup method you used) to restore your files & settings and use your installation disks to reinstall all your programs. Then you're done - take advantage of Windows 7.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  If you try to send or receive messages, you may receive an error message similar to the following error message, which indicates that your Post Office Protocol version 3 (POP3) or host SMTP Simple Mail Transfer Protocol () is not found:

  The host hostname is not found. Please check that you have entered the server name correctly. Account: AccountName, Server: servername, Protocol: POP3, Port: secure (SSL): no, error 11001, error 0x800CCC0D Socket number

  In addition, you cannot ping or establish a Telnet connection to the mail server.

   
  This problem may occur if you have the firewall from Zone Labs such as ZoneAla software...
  This problem may occur if you have firewall software from Zone Labs such as ZoneAlarm or ZoneAlarm Pro, installed on your computer. These programs may prevent communication with your e-mail server.

  RESOLUTION

  To resolve this problem, remove the software firewall from Zone Labs of your compu...
  To resolve this problem, remove the firewall from Zone Labs of computer software. To do this, see the program documentation or contact Zone Labs at the following of Zone Labs Web site for more information:

  http://www.zonelabs.com/services/support.htm (http://www.zonelabs.com/services/support.htm)

  MORE INFORMATION

  For more information about ZoneAlarm or to contact Zone Labs, see what follows...
  For more information about ZoneAlarm or to contact Zone Labs, see the following Web of Zone Labs Web site:

  http://www.zonelabs.com (http://www.zonelabs.com)

  For more information on how to resolve a similar error message when you use Microsoft Outlook on a computer that is configured as an ICS Internet (ICS) client, click on the number below to view the article in the Microsoft Knowledge Base:

  252322 (http://support.microsoft.com/kb/252322/EN-US/) OL2000: (CW) Error Message: The Server could not be found using ICS Connection

  For more information on how to solve an error similar to Microsoft Outlook Express and ZoneAlarm, click on the number below to view the article in the Microsoft Knowledge Base:

  274456 (http://support.microsoft.com/kb/274456/EN-US/) error finding POP3 or SMTP servers when you send or receive e-mail Messages

  The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  later ducdive

• How to explain the error in the executable file?

  As everyone knows, there are 3 parts to the cluster of error: status and source code. The State's flag, the code is the error code and the source is where Labview think that the error occurred. Normally, when I'm in the environment labview course I can just right mouse click the error and click "explain the error" and a description and detailed error possible cause rises.

  However, when I create an executable I don't know how to explain the error to the user, such as labview.

  When an error occurs that I wish I had a popup that says code error, source and EXPLANATION. The code and the only source is so enigmatic sound quite panic inducing the user, whether or not the error is unrecoverable/crash-inducing. Also this would save me having to search the online error code.

  How to make the explanation of the error code? There is a vi that I can enter an error code and get the explanation string?

  There is probably something simple I forget but I couldn't find the answer in my research. Thanks in advance for your help.

  Simple error handler and screw General Error Handler?

• Age of Empires 2: Age of Kings does not work on Windows 7. The error is: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  I can't get my Age of Empires 2: Age of Kings drive on my computer.

  It gives me the error message: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  What exactly is DirectDraw. and how can I make my video card and the driver compatible to it. I already tried to uninstall and reinstall the drive.

  Help, please!

  What kind of graphics card you have and you have the latest DirectX and video card drivers? If this isn't the case, update them.

• I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base.

  I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base. Have Adobe reader X (10.0.1) who refuses to be carried away. Other than a drive X (10.1.0) has been reinstalled. Also have Acrobat reader 5.0 is installed from a CD of the Canon scanner slide. The error remains. If anyone can help. Leif Stg

  Hi Leif,

  Where do you get this error message?

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall all the instance of Adobe reader and Acrobat reader and install the latest version of one of the drive and check if it helps.

  http://get.Adobe.com/reader/?promoid=DINRS

  Method 2: If the problem persists, perform a system restore and check if that helps.

  How to restore Windows XP to a previous state

• I can not install 2680317. I get the error code 80070641, not 646. I tried Microsoft fixit and still no installation. Any ideas out there?

  I can't install the update to windows KB2680317 update for Microsoft Works 9.  I get the error code 80070641, not 646.  I tried Microsoft fixit and still no installation.  Any ideas out there?

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:

  Try the steps in the Microsoft article and check below if the problem persists.

  The problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  And also to try the steps in the following Microsoft article.

  http://support.Microsoft.com/kb/818018/en-us

  Hope the information is useful.

• Impossible to update sound card: I get the error message "could not create c:\cabs\d20007-003-001-decompressez operation canceled."

  Hello
  I have a gateway MT6460, Windows Vista 32-bit model. I got this update for my sound card on the site of the bridge, it has downloaded to my desktop and double clicked on it when it was all the download and it came with this error message. It is not a folder. I don't think that... It seems that it is just a single file... But ya. Any help is very appreciated! If more information is needed let me know.

  If it is an exe file, it is not a zip file - this is a simple executable that just needs to be executed.  Try right-clicking on the file, and then click Run as Administrator - this works sometimes when normal means of installation only.  Try disabling your security software before installing because that can sometimes interfere.  Try doing with no ongoing enforcement in case another program.

  The only way to determine if it applies to your system needs to communicate with the computer manufacturer's technical support Department and ask them.  I am concerned that your computer model is not listed, but it did come with a search for your computer model so I don't know - but they will be.  Maybe they can also help you with the installation (since it's their software) - I at least ask for help when you call (it can't hurt and may even help).  If the error persists, then only they can help you (if you have tried all the steps I suggested) since it is their software and they are the only ones who know how to overcome the error message.

  If you want to see file types (and that's a good thing to know), go to start / Control Panel / folder Options / View and uncheck Hide extensions for known file types.  Then you will be able to see extensions in Windows Explorer or on your desktop.

  I strongly suggest that you get your device drivers directly against the manufacturer of the computer or the manufacturer of the device and NOT Microsoft Updates.  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. (I would do it now before you forget).  I've seen too many times when Microsoft Update driver is older or different from that of the manufacturer of the computer or the manufacturer of the device and causes more problems than it solves (Windows Update drivers are not as up-to-date as those from manufacturers).

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to view the error logs in awm

  I just finished my cube of construction and it failed. How to view the error log itself for me to be able to know exactly what size are the original questions.  When using

  Select * from cube_build_log

  It does not give me the real dimensions causing problems?

  Please help

  Thank you

  There are several levels of logging, so I would need to know more before I can tell you that one to watch.

  • Have you built using MN or through DBMS_CUBE. BUILD?
  • What is the exact error you received?
  • What do you learn the following query?

  SELECT OUTPUT, BUILD_OBJECT_TYPE, BUILD_OBJECT, BUILD_ID

  OF CUBE_BUILD_LOG

  WHEN STATUS = 'IMPOSSIBLE '.

  ORDER BY TIMES DESC

• How to solve the error ORA-00001 in SQL Insert?

  Hi all, I need your help appreciated.
  
  I do a plsql procedure that inserts a line according to the value of the slider, I have error oracle ORA-00001: unique constraint (constraint_name) violated.
  
  This message may appear if a duplicate entry exists at a different level: in the RDBMS MySQL, I have the syntax IGNORES to solve this error of duplication... and in Oracle?
  
  Thanks for your time and your advice.
  Miguelito

  user6317803 wrote:
  How to solve the error ORA-00001 in SQL Insert?

  ORA-00001 means table a unique/primary key / index and you attempt to insert a row with the key value already exists in the table. I'll assume table has a primary key on COUNTRY_ID. Then modify SQL for:

  SQL = "INSERT INTO COUNTRIES (COUNTRY_ID, COUNTRY_NAME, REGION_ID) SELECT"BZ","BLZ", 3 DOUBLE WHERE DOES NOT EXIST (SELECT 1 FROM COUNTRIES WHERE COUNTRY_ID ="BZ").

  There is a good chance COUNTRY table also has unique key/index on COUNTRY_NAME. If so use:

  SQL = "INSERT INTO COUNTRIES (COUNTRY_ID, COUNTRY_NAME, REGION_ID) SELECT"BZ","BLZ", 3 DOUBLE WHERE DOES NOT EXIST (SELECT 1 FROM COUNTRIES WHERE COUNTRY_ID = 'BZ' OR 'BLZ' = COUNTRY_NAME).

  SY.

• How to catch the exception in the sliders

  Hello
  
  How to catch the exception no. DATA FOUND/other exceptions with the cursor
  

  DECLARE
  CURSOR c1 IS SELECT * FROM EMP WHERE empno = 1234;
  BEGIN
  FOR i IN c1 LOOP
  DBMS_OUTPUT.PUT_LINE(i.ename);
  END LOOP;
  END;

  so 1234 is not in my table, how to trap this.could help me please
  
  Published by: user4587979 on 27 May, 2010 03:46

  Maybe it's

  declare
    CURSOR c1 IS SELECT * FROM EMP WHERE empno = 1234;
    lemp c1%rowtype ;
  begin
    open c1;
    loop
      fetch c1 into lemp;
      exit when c1%notfound;
      DBMS_OUTPUT.PUT_LINE(lemp.ename);
    end loop;
    if c1%rowcount = 0 then
      raise no_data_found;
    end if;
    close c1;
  end;