How to catch the flaws of adapter database on OSB jca?

Similar Questions

• BBM how to retrieve BBM be hacked or how to catch the pirate?

  Hello everyone, I have a few requests here as member of my family comes from live be hacked:
  -can I know if we provide BBN, PIN, could we know email ID used to register?
  -How to retrieve the BBM be hacked?
  -How to catch the pirate?
  Thanks in advance!

  Most likely you allowed someone to get your credentials BBID, or you have been deceived into giving them upward.

  This is the management of Blackberry users who have their BBID diversion...

  -------------
  In these scenarios, the user must email\contact our office of privacy protection
   
  http://CA.BlackBerry.com/legal/privacy-policy.html
   
   
  10. questions or concerns? How to contact us
  BlackBerry welcomes your questions or comments about this privacy policy and the way in which we treat your personal information. If you have any questions, concerns, or you want to request access to your personal information under the privacy or data protection laws, please communicate with BlackBerry, either by e-mail or in writing and we will use commercially reasonable efforts to respond:
  email: [email protected], or
  write to one of the following offices of the nearest BlackBerry you:
  BlackBerry Privacy Office c/o BlackBerry (attention Legal Department), 2200 University Avenue East, Waterloo, Ontario, Canada N2K 0 to 7
  BlackBerry Privacy Office c/o BlackBerry (attention Legal Department), 200 Bath Road, Slough, Berkshire, United Kingdom SL1 3XE
  BlackBerry Privacy Office c/o BlackBerry (attention Legal Department), 1 International Business Park, The Synergy Building, 2nd Floor, Singapore 609917
  ------------

• How to catch the event storm rotation?

  Hi all

  As the title,

  I want to know how to catch the rotation on the device of the storm?

  Y at - it samples which I can draw?

  Thank you

  You can use the method getOrientation() class net.rim.device.api.ui.Display

  Press the button Bravo thank the user who has helped you.

  If your problem has been resolved then please mark the thread as "accepted Solution".

• How to catch the end of an external task?

  Hello
  
  How to catch the end of an external task?
  OS: Windows 2003
  DB: 10.2.0.1
  
  The code I wrote will run forever:

  declare
     d date;
     n number;
     -- and more
  begin
      d := sysdate;
      dbms_scheduler.create_job(
        job_name => c_job,
        job_type => 'executable',
        number_of_arguments  => 14,
        job_action => c_cmd,
        enabled => false,
        auto_drop => true
      );
      dbms_scheduler.set_job_argument_value(c_job,1,'/c');
      dbms_scheduler.set_job_argument_value(c_job,2,c_command);
      dbms_scheduler.set_job_argument_value(c_job,3,c_pw);
      dbms_scheduler.set_job_argument_value(c_job,4,c_pw_val);
      dbms_scheduler.set_job_argument_value(c_job,5,c_port);
      dbms_scheduler.set_job_argument_value(c_job,6,c_port_val);
      dbms_scheduler.set_job_argument_value(c_job,7,c_key);
      dbms_scheduler.set_job_argument_value(c_job,8,c_key_val);
      dbms_scheduler.set_job_argument_value(c_job,9,c_agent);
      dbms_scheduler.set_job_argument_value(c_job,10,c_batch);
      dbms_scheduler.set_job_argument_value(c_job,11,c_source);
      dbms_scheduler.set_job_argument_value(c_job,12,c_dest);
      dbms_scheduler.set_job_argument_value(c_job,13,c_log);
      dbms_scheduler.set_job_argument_value(c_job,14,c_yes);
      dbms_scheduler.enable(c_job);
   
      -- Job started, waiting...
      loop
        select count(1)
        into n
        from user_scheduler_job_run_details t
        where job_name = c_job and
              t.log_date >= d;
        exit when n > 0;
        dbms_lock.sleep(1);
      end loop;
   
  end;

  The work ends in fact, user_scheduler_job_run_details is updated (if you run the select statement in the loop in another session, it returns 1), but the selection running into the loop will always return 0.
  Any help is appreciated.
  
  Kind regards
  Lmocsi

  Hello

  It's strange, maybe you can try to use the timestamp type rather type date and with the help of an offset in the case where the work already finished for example d = systimestamp - second interval '1'

  Another thing to watch is if you compare the dates in the same time zone, otherwise you must ensure that all sessions use the same time zone (setting the default_timezone attribute Planner can help).

  Hope this helps,
  Ravi.

• How to catch the exception in the sliders

  Hello
  
  How to catch the exception no. DATA FOUND/other exceptions with the cursor
  

  DECLARE
  CURSOR c1 IS SELECT * FROM EMP WHERE empno = 1234;
  BEGIN
  FOR i IN c1 LOOP
  DBMS_OUTPUT.PUT_LINE(i.ename);
  END LOOP;
  END;

  so 1234 is not in my table, how to trap this.could help me please
  
  Published by: user4587979 on 27 May, 2010 03:46

  Maybe it's

  declare
    CURSOR c1 IS SELECT * FROM EMP WHERE empno = 1234;
    lemp c1%rowtype ;
  begin
    open c1;
    loop
      fetch c1 into lemp;
      exit when c1%notfound;
      DBMS_OUTPUT.PUT_LINE(lemp.ename);
    end loop;
    if c1%rowcount = 0 then
      raise no_data_found;
    end if;
    close c1;
  end;
  

• How to get the IP address, Port database don't & Oracle SID details

  Hello
  How to know the IP address, Port database don't & Oracle SID details

  Hello

  The IP address is for not for the database server.

  Port no, may be different.

  check what sid, listening to the port

  lsnrctl > status

  or

  Open the tnsname.ora or listener.ora to find what hostname(ip address), what is the port number and what is the SID that you connect

  Hope that answers your question.

  Kind regards
  Rakesh Jayappa

• How to install the USB WiFi adapter?

  I've received a USB WIFI adapter and do not know how to set up or even knowing if it is attached.

  New hardware has been installed on the plug-in. Switch turned on, but there is nothing that lets me know he's working.

  Hi garyhenrymacphail,

  Hmm and what should I say now? I also put t how to configure your USB WiFi adapter because I don t know which you have, what laptop and operating system.

  The spirit normally each USB WiFi adapter, you also get a manual how to install it. Alternative, contact the manufacture of this adapter for more information.

• How to remove the alarms and events database of Citadel?

  Hello

  I use LV 2010 with DSC.

  I made a mistake in my program and I wrote too much data event and alarm at the Citadel. Database *.mdf/*.ldf files are quite large > 1 G. Normally, I connect only two alarms per day. I want to delete all events alarm + data before a certain time of stamps for example. 1.1.2011. How can I do? I tried to use MAX and perform the operation so I wrote small program which reach the data from temporary database and then remove it. Yet I can find old events and alarms... I am able to remove the traces of old but not the events/alarms. How do I remove the alarms and events?

  Thanks, Jim

  Hi Jim,.

  Have you seen this:

  http://forums.NI.com/T5/lookout/how-can-I-delete-alarm-and-event-data-from-a-Citadel5-database/m-p/5...

  Not sure if it is valid with the current version, but worth it.

• How to connect the USB WiFi adapter to a Linksys e2500

  I need to use a USB Wifi adapter and I don't know how to configure the router to communicate with the device.  The installation disk supplied with the device that has the installation software does not work with windows 7.  Because I don't have the installer, I am trying to configure it manually, but I don't know how to do it.  I guess there is something in the configuration of the router, I need to connect the USB WiFi Internet.  I am ignorant of network, so if I'm away from base here can you give me some advice on where I need to focus.

  Yes, I know the router puts a wifi signal, but my chromecast will not work with it.  After plugging the Wifi adapter and try to put up with Windows, I had the beginnings of dialog between my chromecast device and Setup chromecast - that's never happened before.

  Ed

  I tried this site and I remember there were some problems.  It turns out that there must be default windows drivers and they work fine.  I finally got to work and my Chromecast is upward and the work.

  Thanks for your reply.

  Ed

• How to catch the long menu key?

  Hello

  I have a background application that launches a window of the screen only and I need to be able to listen/catch long menu key press the application to switch to this meal bar. In fact, if the user launches the application switch my screen bar somehow needs to know so he can close. How do I do that? A UIApllication can simply listen to deactivate() calls but screen can do that. I've already implemented KeyListener, but the long press event is not caught it.

  Update:

  Hmmm... She is one storm that has the feture to launch the switch application through a long press on the menu button? Doen't work on Curve 8900.

  I can still catch the application change event in a window of the screen, anyone know how?

  Thank you.

  KeyListerners keyRepeat() seems to intercept the key event in the application that starts the screen.

  Problem seems to be resolved then.

• How to catch the error in time-out in BEPL

  Hi, I am building some SOA BPEL to call another SOAP service that may treat the time quite a long time. In this case, SOA BPEL fails with ErrorCode ORAMED-03303. In order to ensure the completion of the entire BPEL process, I tried to add a CatchAll to intercept this error. But FAILED. The BEPL still does not with ORAMED-03303. Can someone help me on this? Thank you.

  Hi Lisoft,

  You might see these errors because of the long running process. There are several places where you have to fine-tune the settings of time-out.

  The first thing you should look into is the MBean timeout "SyncMaxWaitTime" which is set by default at 45 seconds. (Connect on SOA EM > SOA > click right on soa-infra > Administration SOA > BPEL properties > more BPEL properties > SyncMaxWaitTime). You then have to check what the JTA transaction time-out set for the instance of weblogic (connect on the SOA console-> click-> JTA field).

  You can control the time-out settings max on a composite level using "oracle.webservices.httpReadTimeout" and "oracle.webservices.httpConnTimeout" binding properties. These values configured in the composite must be less than the value of the "SyncMaxWaitTime" for synchronous processes.

  If you use the properties mentioned above for your Web service reference, then you could catch the fault of "timeout" in your composite. The binding reference might look like below in the file composite.xml.

  UI:wsdlLocation = "TestService.wsdl" > "

  http://xmlns.Oracle.com/SOATestWSService/TestWSService/bpelTestWSService#WSDL.interface (bpelTestWSService)"/ >

  http://xmlns.Oracle.com/SOATestWSService/TestWSService/bpelTestWSService#WSDL.EndPoint(TestWSService_ep/bpelTestWSService_pt)"

  location =""

  soapVersion = "1.1" >

  much = 'false' override = "may" > 10000

       

  much = 'false' override = "may" > 10000

  much = 'false' override = "may" > false

  Hope the link below could be very useful for you.

  http://soasol.blogspot.com/2009/12/how-to-set-timeout-for-Web-service-in.html

  https://technology.AMIS.nl/2011/11/18/timeouts-in-Oracle-SOA-Suite-11g/

  It will be useful.

• How to 'catch' the data in a field of apex_item.text

  Hello

  How can I catch the data, I write in a field of apex_item.text and copy it to another table.

  Example:

  Source table

  Create table Hund(
  PRI_KEY number,
  Name varchar2(30)
  );
  
  

  Classic report in the Apex:

  Select
  APEX_ITEM.DISPLAY_AND_SAVE(1, PRI_KEY),
  APEX_ITEM.DISPLAY_AND_SAVE(2,Name),
  APEX_ITEM.TEXT(3,weight) as weight
  From Hund;
  
  

  The weight of the column do not exist in the table Hund, but is it possible to catch what is written in the Apex Page (and put in another table)?

  EDIT: Maybe a resolution with a Collection of APEX?

  THX

  René

  René

  F01 being a checkbox only lines checked are in the table.

  This means that when the box is checked for lines 1 and 3. Only the rows are in the table in the f01.

  Then, when for the second race hollow the loop index is 2. You treat rank 3 for the f01 table but the 2nd rank of the other tables.

  You have to match the table value f03 with f01 table values to find the line number for the f20 table.

  for i in 1..apex_application.g_f03.count
  loop
     for k in 1..apex_application.g_f01.count
     loop
        if apex_application.g_f03(i) = apex_application.g_f01(k)
        then
           UPDATE PRM_CHK_BSTBS_ABGL_EDIT
           SET KOMMENTAR=APEX_APPLICATION.G_F20(i)
           WHERE NUMMER_EINHEITLICH=to_number(APEX_APPLICATION.G_F03(i));
         end  if;
     end loop;
  end loop;
  

  This will update the checked lines.

  If you want to update all the lines to leave out the inner loop and instruction.

  I don't see what you posted I have, this is the case, but it is not a good idea to mix apex_item and columns be updated regular.

  Nicolette

• How to stop the mapping files from database BDB?

  We have a problem where physical memory on Windows (NT Kernel 6 and more, e.g., Windows 7, 2008R2, etc.) gets maxed out after a while when our application running.  On a 8 GB machine, if you look at our process of loading of BDB, is only about 1 GB. But when you look at using RAMMAP memory, you can see that the BDB database files (files not shared region) are mapped into memory, and it is the place most of the memory consumption.  I don't normally care like mapping memory can have performance benefits and ease of use. But the results are provided by the system to an abrupt stop.   This happens when we are inserting results in high order, e.g. 10s of millions of records in a short period of time.

  I would attach a photo in this post, but for some reason the insert image is grayed out.

  Open environmental indicators: DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_TXN | DB_INIT_MPOOL | DB_THREAD | DB_LOCKDOWN | DB_RECOVER

  Flags the database open: DB_CREATE | DB_AUTO_COMMIT

  An update for the community

  Cause

  We opened a request for assistance (SR) to work with Oracle on the matter. The conclusion that we arrived that was the main reason for the Windows System Cachememory consumption.  (For reference, see http://support.microsoft.com/kb/976618) When opening files in buffer mode, the equivalent call CreateFile without specify FILE_FLAG_NO_BUFFERING, all i/o to a file through the Windows System Cache.  More database file, more memory is used to support.  This is not the same as memory mapped files, which Berkeley will use for the files of the region (i.e. the environment.) Also use the memory, but because they are limited in size, will not cause a problem (for example need a larger environment, just add more memory).  The obvious reason to use the cache is significant workload for optimizations of performance, especially in reading.

  The downside, however, is that when there is an significant amount of e/s in a short period of time, this cache can get really full and can translate into physical memory being close to 100% used.  This has a negative impact on the entire system.

  Time is important because Windows needs time for active pages transition to pages pending that decreases the amount of physical memory.   What we have found, is that when our database has been installed on the FLASH drive, we could generate a lot more I/O and our tests might work in no time, but memory would get close to 100%. If we missed these same tests to drive slower, while the result was the same, i.e. inserted 10 million in data files, time takes a lot of time and memory usage does not approach even close to 100%. Note that we also see consumption memory occur when we use the hotbackup in the BDB library. The reason is obvious: in a short span of time, we read the entire file of BDB database that makes Windows use the system for her cache. Total amount of memory could be a factor as well. A system with 16 GB of memory, even with a FLASH drive, we had a hard time to reproduce the problem where climbs the memory.

  There is no Windows API that allows an application to control how system cache is reserved or usable or maximum for an individual file.  As a result, BDB has very well control refined this behavior on a basis of individual files.  BDB can only enable or disable buffering in total for a given file.

  Workaround

  At Berkeley, you can disable layouts buffer IO in Windows by specifying the DB_DIRECT_DB flag for the environment.  It is the equivalent of calling CreateFile with specifying FILE_FLAG_NO_BUFFERING.  All I/O is going straight to the disk instead of memory and all the I/O must be aligned to a multiple of the sector size of the underlying disk. (NTFS sector size is usually 512 or 4096 bytes and BDB normal page sizes are usually multiples of that, so for most, this should not be a matter of concern, but know that Berkeley will test this page size to ensure that it is compatible and if not it will disable silently DB_DIRECT_DB.)  What we found in our tests is that using the flag DB_DIRECT_DB had too much negative impact on performance with something else to FLASH disk and therefore cannot use it. We consider acceptable for FLASH environments where we generate significant I/O in short time.   We could not reproduce the memory effect when the database is hosted on a drive of SAN running 15K SAS, which is more typical and so close the SR.

  However, Windows has an API that control the amount large total system of the cache system to use space and we can experiment with this setting. Please see this http://support.microsoft.com/kb/976618 we will also experiment with the help of multiple database partitions so that Berkeley distributes the load to these other files possibly giving the delay of the system cache to move active pages in standby mode.

• How to add the software iSCSI adapter in vSphere, ESXi 5.0?

  Hello

  Please give me the steps to add the software iSCSI adapter in vSphere, ESXi 5.0.

  Thank you.

  Hello

  In an earlier version of VMware ESXi software iSCSI adapter was included in the list of the storage card, but is not in the case of VMware ESXi 5.0. In ESXi 5.0 iSCSI adapters are not listed by default and must be activated first before we go away from configuration.

  How to add iSCSI adapter in ESXi 5 check the link below

  http://www.google.co.in/#sclient=psy&hl=en&source=hp&q=How+to+add+Software+iSCSI+Adaptor+in+vSphere+ESXi+5.0+Site%3A+blog.srinfotec.com&pbx=1&oq=How+to+add+Software+iSCSI+Adaptor+in+vSphere+ESXi+5.0+Site:+blog.srinfotec.com&aq=f&aqi=&aql=&gs_sm=e&gs_upl=9181l21561l0l21875l33l30l4l0l0l0l736l10898l3-8.7.7.1l23l0&bav=on.2,or.r_gc.r_pw.&fp=1ad7a99e02298f12&biw=1366&bih=647

  or

  http://blog.srinfotec.com/?p=178

  concerning

  Rohit

• How to catch the error in 1843. .nOT months valid...

  It's in my cursor loop for
  
  mstart_issue: = TO_CHAR (to_date(mstart_issue,'YY-MON'), 'Mon.YYYY');
  mend_issue: = to_char (to_date(mend_issue,'YY-MON'), 'Mon.YYYY');
  
  But it throws error 1843...
  
  
  I have execptions to conclude an error value
  When value_error then
  alert ('value error' | moldmembership);
  
  But I need something to catch the next error is to say... The moment a month not valid error. . He should catch this error
  Like warn ('not validm months' | membershpnumber)
  What should be the exception to catch. .the 1843 error...
  As we have been exceptions, as when too many lines to catch duplicate records...
  
  And this is how my data end_issue looks like.... 10 - Jul
  12 - Aug date in the format yy - my...
  But there is error...
  Kindly help...
  Thank you

  You pass the NLS_DATE_LANGUAGE in the TO_DATE function, but not the function TO_CHAR. You want to convert the string to a date in a NLS_DATE_LANGUAGE of AMERICAN, but then you want to convert the date to a string using NLS session parameters. If these parameters are not AMERICANS, you will get the results you see.

  Justin