How to change account Adminstrative existing to another user account in Vista

Similar Questions

• IProcurement, can I change the requisitions created by another user?

  Hello

  IProcurement, can I change the requisitions created by another user? If so, how to set? Thank you.

  Concerning

  Leo

  Hi Leo,

  iProcurement is designed for the entire organization, and threre is a few restrictions as only the picker can modify the request. In rellease 12, there is a concurrent request to change the preparer if necessary:

  How to change mass employees end/unavailable (applicant, trainer) in the approval of the application and the process of application for change of version 12.1 (Doc ID 1432778.1)

  Thank you

  Clarino

• How to set the variable USERPROFILE of another user?

  I have the main account that I use and an admin account to call anytime, that I need (for security system). I recently came across problems with repartition my hard drive (it's a bit difficult to change the size of the partition between a basic volume and an extended volumes, even with a third-party utility that performs its work until Windows starts and wanted to completely pass the two user profiles (and preferably both program files)) (, but I can't even more with after discovering that most of my programs have themselves out of their expanded paths and not system variables linking the search through the registry) for the extended partition. I was trying to see if I could do that through a batch file (whose content I have so far for the non-admin will be shown below after this post), but I can't find anything in the registry that I could change. My question is twofold:

  1. I try to take the right path by using a batch script to move the two users? If I did do something wrong and if so, what?
  2. How could I put a variable user for another user on the same system? (It is a continuation of question 1)
  3. (Second question) Is it possible to move my programs Program Files/Program Files (x 86) runs on my D: drive and operate them out of that? I was also wanting to have just my system files and similar to run on my C: drive, because of the drastically limited space. The only exceptions to that would be the dozen of programs that are installed in the folder root (aka C:\whatever).

  I tried repartitioning earlier, because I wanted to make room for my C: drive D: drive much smaller to create many more. Here are the sizes of partition for each partition on my HARD drive:

  • 100 MB (OEM Partition)
  • 9.77 GB (recovery Partition)
  • 58,59 GB (C:, OS, 6,49 GB drive left... not enough for me to copy it to my iTunes songs about library 1 200 on it from my old netbook)
  • 229.63 GB (D: drive, too much for my tastes here)

  I wouldn't mind if I ended up having to save my D: drive format before that, but I don't know how useful it would be.

  Code for the batch file (I named it moveuser.bat)

  (the first line and the last two lines are to refuse to execute the batch file and DO NOT EXECUTE comments)

  GoTo EOF

  cmd

  title moveuser.bat

  MD C:\TEMP\cmdtmp

  MD "D:\From C\Users\" " " ".

  MD 'D:\From C\Program Files files.

  MD ' D:\From C\Program Files (x 86) \Common Files.

  CD C:\Users\Isiah

  Robocopy ".» "------" "D:\From C\Users\" /e /mt:2 /copyall /dcopy:t /tee /log:C:\TEMP\cmdtmp\tmp.txt ".

  set USERPROFILE = "D:\From C\Users\""" "

  CD appdata\local

  RD ' virtualStore\program files (x 86) \aura4you "/s /q

  CD C:\TEMP

  RD /s /q cmdtmp

  : EXPRESSIONS OF FOLKLORE

  REM 'DO NOT RUN. "

  Your system is too complicated. If you implement it then it'll keep you causing pain. Much better to keep things simple as follows:

  • Move the 'My pictures' folder on the D: drive.
  • Move the 'My music' folder on the D: drive.
  • Let your profiles on the C: drive.
  • Let the program files on drive C:, if only because many setup programs will create their files in "C:\Program Files (x 86)" instead of using the % ProgramFiles (x 86) % as they should.

  This approach will free a lot of space on the C: drive. It will also allow you to put your iTunes library on the D: drive.
  A few comments on your batch file:
  GoTo EOF

  cmd
  . . .
  : EXPRESSIONS OF FOLKLORE
  ': EOF ' is a built-in label that references at the end of the batch file. You jump to it as follows: goto: eof. Have a line of the form
  : EXPRESSIONS OF FOLKLORE
  interferes with the integrated label. Get rid of it!
  The "cmd" line is not necessary and will have unexpected side effects. Get rid of it.

• How can I share my books with another user?

  How can I share my books with another use?

  Your iBook and anything else that you have downloaded from the iTunes Store, are related (and allowed) to your account - they can be shared or loaned to other users.

• How to share a workspace customized with another user

  Is it possible to share a personalized workspace FrameMaker with another computer? The workspace is saved as a file somewhere that could be given to another user?

  Search for .cfws files in C:\Users\User_name\AppData\Roaming\Adobe\FrameMaker\xx\WorkSpaces\

• How to change account login in Adobe Content Viewer on Tablet Win8?

  LS,

  Can you please tell me how I can change the account in Adobe Content Viewer.

  Top-right corner it states: account: [email protected] but I can't find how can I signout and sign in with a different e-mail address.

  We use another account to get an overview of the presentations of test,

  I hope anyone can help ;-)

  
  

  Kind regards

  
  

  Erwin Boon
  

  Hi Christophe,

  I feel so...   That I could not find myself

  In effect, if I drag right Adobe content Viewer settings tab appears and I can disconnect easily.

  Thanks for your help on this.

  You have made my day.

  Kind regards

  Erwin Boon

  Christophe_Jossic wrote:

  on a Windows 8 tablet, the menus are hidden in what is called the charms bar... I think that if you swipe to the left of the right edge of the screen, it should appear

• How to change the language setting in another language to the English language in hplaserjet1213nf all in one

  How do I change the setting other language to the English language in hplaserjet1213nf while a front pannel language printer

  Please explain step by step

  kindly answer me pl.

• How to change a script existing (ImageCatalog.jsx)

  Hello

  I use ImageCatalog.jsx to create pages in bulk with pictures on them, but they don't come out in the order of name.

  I found this existing forum that addresses how to do, but I don't know how to work with scripts - create a new document with the script text or replace text in the script exist (that I tried to do, but it did not work).

  Either way, I use Windows, not Mac.

  The current forum is here:Re: image sorting before import imageCatalog

  Any help would be appreciated.

  Thank you

  Amanda

  Hello

  Do not replace the line no 52 (inside a function myWinOSFileFilter (myFolder)):

  return myFilteredFiles;
  

  with this part of the code;

  return myFilteredFiles.sort(Names);
       function Names(a,b) {
            if (a.name.match(/^\d/) && b.name.match(/^\d/))
                 return parseInt(a.name) - parseInt (b.name);
            if (a.name > b.name) return 1;
            if (b.name > a.name) return -1;
            return 0;
            }
  

  Save (perhaps a copy...?) and run

  Jarek

• How to change Scan-one printer to another?

  During the uninstall process and relocation 'HP LaserJet Pro M1130-M1210 MFP Series', my pc now has printing to the correct printer but it scans the incorrect printer (brother).

  The printer model is that HP LaserJet Pro M1212nf wired network connected.

  This printer has been recently bought and installed.  When first installed it has worked well.  This is the firmware is up to date.

  OS is Windows 7

  The Brother printer is connected to WiFi.

  How can I get the scan software to go to the HP M1212nf and not the brother?  It prints ok on the HP.

  The problem disappeared when I uninstalled the brother and re-installed the HP then re-installed the brother.  Thank you for your help.

• How to change the region code for DVD ROM on Acer Vista

  See the title, I don't ' want to rewrite this, once again. Thank you

  * original title - my computer won't let me change the region code for my disc drive. I have two different with region 1 and 2 DVDs. How can I change at will? Help! Good grief! My laptop is an Acer with windows vista.*

  Hi Shakira R.

  Please see the following article with useful information about your question:

  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/mediaadvice/0072.mspx

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to transfer libraries creative cloud to another user

  A member of our team goes and we would like CC libraries they have created to transfer to another owner because we will be closing their account. Is this possible?

  Thank you

  Hello

  If I understand your 'one of our team leaves "properly, if this member is always there. So, it must 'share' libraries with you/other people, which means making available to third parties in question. You must organize its activities according to this approach, which I quote as an indication:

  What you can do with libraries > share and collaborate > https://helpx.adobe.com/creative-cloud/help/libraries.html

  Share libraries, library and mobile creations > https://helpx.adobe.com/creative-cloud/help/share.html

  Share your work > https://helpx.adobe.com/creative-cloud/kb/publish-behance.html

  Hans-Günter

• How to change the parameters of program on Acer laptop with Vista installed

  * original title - is something wrong with my hardware or is it me? *

  A year ago, I got this acer laptop with windows vista installed. Even when my microsoft word product ran out--I never could find the keycode - my phone still worked well enough, connection to the internet very well, are not slow or anything. I left my laptop at the home of a relative for almost a year and let their (and the other 2 people out there) to use. It worked fine when I come into their home and used - I forgot to bring it home with me - and I recently picked him up two weeks or two it y a. still, it connects to the internet, but I have problems to open all programs other than the control panel (the games, microsoft, Notepad, inkball (, basically everything that was already about this or even downloaded), because it always appears with and 'open with', program that was never on the computer before I reported. And when I try to open the program with its own program or any other thing, it won't work at all. And I can not change the open with screen because I have no idea what to do! Help, please! It's driving me crazy! Thanks to everyone who helps me with a viable answer!

  Thank you!

  Renee Meister

  A year ago, I got this acer laptop with windows vista installed. Even when my microsoft word product ran out--I never could find the keycode - my phone still worked well enough, connection to the internet very well, are not slow or anything. I left my laptop at the home of a relative for almost a year and let their (and the other 2 people out there) to use. It worked fine when I come into their home and used - I forgot to bring it home with me - and I recently picked him up two weeks or two it y a. still, it connects to the internet, but I have problems to open all programs other than the control panel (the games, microsoft, Notepad, inkball (, basically everything that was already about this or even downloaded), because it always appears with and 'open with', program that was never on the computer before I reported. And when I try to open the program with its own program or any other thing, it won't work at all. And I can not change the open with screen because I have no idea what to do! Help, please! It's driving me crazy! Thanks to everyone who helps me with a viable answer!

  Thank you!

  Renee Meister

  http://www.ehow.co.UK/how_5804857_set-file-associations.html

  and

  http://www.vistalessons.com/set_default_programs_vista.htm

• How do I open Mozila firefox with another user using any script or Bat file

  Hello...! There I want to create a bat by which I can open Firefox with a different username.

  I typed below the code and it works well in command prompt, but his does not work as a bat file.

  runas/user: domain\username "C:\Program Files\Mozila Firefox\Firefox.exe".

  or

  runas / user: ABC\XYZ "C:\Program Files\Mozila Firefox\Firefox.exe".

  Can someone help me out here. Can someone give me a code by which I can open firefox with a different user name by using the bat file.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forums Pro TechNet Windows XP IT.

• How can I get adobe flash on another user? Don't forget that I'm not that computer!

  I can't get adobe flash or microsoft word on the other user. I tried to make the other user admin. but that doesn't work anymore... Help

  Hello

  I suggest you to see link below and check if it helps.

  Method 1: Download and install Adobe Flash Player (Internet Explorer): http://kb2.adobe.com/cps/191/tn_19166.html?promoid=DTEGP#main_DownloadInstall

  For your reference: Adobe Flash Player installation issues

  http://kb2.Adobe.com/CPS/191/tn_19166.html?promoid=DTEGP

  Method 2: Also I suggest you to see the link below, which will help you install Microsoft Office.

  http://Office.Microsoft.com/en-us/try/

  If the problem persists then try contacting support Microsoft Office using the link below.

  http://Office.Microsoft.com/en-us/support-FX101825174.aspx?CTT=97

  Hope this information is useful.

• How can I change account limited user account for the administrative account information

  Can you please help me find answer how to change account limited administrative user account information? I'm locked and I can not change any info because by mistake I select limited in my user account account.

  Hi sbhailal,

  See the Microsoft article below and try the steps mentioned, check if it helps you log in windows.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305