How to change the boot order in the BIOS?

Similar Questions

• How to change the BIOS settings to read the Norton CD?

  In accordance with the instructions of Norton, I need to temporarily change the BIOS setting so that my computer will read the CD that has a Norton Bootable Recovery tool to start the computer. Norton's other attempts to remove the W32. SillyFDC.BDP worm failed, so they recommend using their recovery tool. How can I change the BIOS? Thank you.

  In accordance with the instructions of Norton, I need to temporarily change the BIOS setting so that my computer will read the CD that has a Norton Bootable Recovery tool to start the computer. Norton's other attempts to remove the W32. SillyFDC.BDP worm failed, so they recommend using their recovery tool. How can I change the BIOS? Thank you.

  You may or may not need to change the BIOS settings.  Assuming that you have a bootable CD with this tool, put it in your CD drive and restart the computer.  One of the 3 things will happen:

  1. the computer starts from the CD and you can follow all instructions you have Symantec.

  2 watching very carefully that the computer starts.  You may see a message that says something like "press any key to boot from the CD-ROM.  If you see this message, press a key (for example, the space bar) and the computer boots from the CD.

  3. watch very carefully that the computer starts.  You will see a message that says something like, "to change settings, press F1."  The key that you press on will be different depending on your particular computer.  It might be F1 or F10 or del key.  Whatever it is, press this button and you will enter the BIOS configuration utility.  From there, you can change the boot order to CD first.  Directions to navigate the BIOS Setup will be displayed on the screen, but they will involve using the button tab, enter, and arrow keys, because your mouse does not work in this utility.

  You can also take a look here: http://www.bleepingcomputer.com/forums/topic228631.html

• How to change the bios password remotely

  We're a lenovo shop all. (m58 and more). I'm looking for a way to change the bios supervisor password remoetly. I found the WMI and the PDF orders to go with them but when I run SetSupervisorPasswordRemote.vbs I get "Microsoft VBScript compilation error: due to end of the statement"I am not very versed in VB so im not sure how to solve this problem. "

  If not is it possible to take this back to powershell and use it to change the bios password?

  Hello aford89,

  Although the follwing linked to the thread is on T450 ThinkPads the answer is the same across the range of product; You can only do this if you have already set a password manually.

  https://forums.Lenovo.com/T5/enterprise-client-management/setting-BIOS-password-in-SCCM-task-Sequenc...

• HP Probook 440 2 How to change the BIOS to work around the memory not supported the start-up message

  Hi everyone, first I would like to say that I find the list of operating system for the less "interesting".

  Now, I bought a G2 to replace my 4441S.

  The problem is that the momory I had gave me a message as "memory not supported."

  very well, I bought new memory, same problem with 2 brands, so I it's maybe because I bought 'normal' memory and not DDR3l?

  The thing is that I need this memory quickly and I can't find DDR3L, now I use corsair Vengeance and I need more on the lan function but this message that allow me to use the computer if I press on enter, have no countdown with option by default and no BIOS settings so I want to change that and either add a timeout that starts the laptop or just disable this message , because it works, I use it now.

  I need that until I can find the DDR3L.

  Thank you.

  You don't seem to understand how it works with primary and secondary memory voltage settings schedule and bus. the laptop BIOS ROM file includes settings in its encoding of the memory modules that meet the compatibility requirements. If you install memory that has not been tested for compatibility, so it will not work or even it seems to work, it will be unstable.

  A BIOS of the laptop is quite unlike a BIOS that is present in a motherboard level amateur games. There are no timings adjustable and tensions to the timings of the memory or bus in a laptop BIOS BIOS standard voltages. It actually is to protect the owners from themselves.  You "do not 1.5 and 1.35. You can't change the setting of the voltage on the bus to do anything other than what is defined in the BIOS. If you install the module memory does not accept the voltage set by the BIOS code, then you are simply out of luck.

  Check out the BIOS Modding forums if you want to see what options may be made available.

• How to change the BIOS battery inspiron one 2320

  Please how do I change the battery of the BIOS on my Dell inspiron one 2320.

  I'm looking for a model, because I already opened the hood, but I have not found the battery.

  Thank you

  Schpountz

  Please how do I change the battery of the BIOS on my Dell inspiron one 2320.

  I'm looking for a model, because I already opened the hood, but I have not found the battery.

  Thank you

  Schpountz

  How to replace the battery on page 56 here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/Inspiron-one-2320_owner%27s%20manual_en-us.PDF

  Bev.

• How to change the bios of my computer?

  I want to change my computer's bios so that it does not seek to boot from an external drive.  How do I do that?

  1. read the manual of your computer.

  OR

  2 turn off your computer.  Turn on your computer and monitor very closely the screen.  You should see a message go quickly indicating something like "Press F1 to enter Setup".  Turn your computer off again.  Turn it back on and immediately start typing the key that you have identified.

  OR

  3. provide the brand and model of your computer, and a person may have information for you.

• How to change the boot order for the applications to the taskbar?

  When I moved to W7, software of my trackball wouldn't work and Kensington wouldn't fix, so I moved to a conventional mouse. I recently bought a better mouse and it has its own software. The software works very well, the problem is that it starts towards the end of the boot sequence. I would like to start earlier. The problem is that all the research I've done changing the order of departure come back with how to change the order of display in the taskbar.

  How can I change the boot order for the applications to the taskbar for the software for the mouse, boots earlier in the list?

  Windows does not have native to adjust the boot order, but there are third party solutions. See

  http://www.howtogeek.com/52043/how-to-control-the-order-of-startup-programs-in-Windows/

• How to access the "Bios" in Vista to change "boot sequence.

  Every time I have to install a new program on Vista, the system won't re - start without the Vista installation disc. I need to know how to enter the "bios" to change the boot sequence. Thank you

  Hello

  / Configuration settings (BIOS/CMOS) often F2 start you so look at the screen - boot order should be set to
  Hard drive 1 for normal operation.

  Sound like you may need to run the repair of booting from the Vista disc.

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try Options recovery or a disk of Vista startup repair.

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Vista disk

  SFC/scannow
  Press enter

  and after that runs away

  Chkdsk /f /r
  Press enter

  (Spaces between C and / k and / and f and /)

  Retry (if necessary) after Chkdsk startup repair.

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Does anyone know how to change the order of iTunes playlists in folders? I am on iTunes 12.3.2.35 thank you.

  I can't figure out how to change the order of playlists within folders or find iTunes help topics that address this issue.  Please help, someone!  Thank you.

  Karin.

  In a playlist folder iTunes sorts the smart playlists in alphabetical, followed by regular playlists in alpha order.  It does not provide a way to change this.

• How to change the tab order of an array of clusters?

  How to change the tab order of an array of clusters?  I have the cluster arranged into a table in the front panel.   The element of the cluster passes horizontal and array element passes vertically.   When I press the tab key, the cursor will move to the item next to the table instead of the next item in the cluster (down to the place overall).

  so you have an array of clusters or cluster and the separate table?

• How to change the order of the pages in pdf

  How to change the order of the pages of the pdf files scanned

  Using page thumbnails, you can shift the page you prefer. There are two documents icon.

• How to change the column ordering the interactive report?

  How to change the column ordering the interactive report?

  Hello

  Run the report as a developer, click on the "wonder wheel", click "Select columns" and reorder your columns in the box 'report '.
  Then click again on the "wonder wheel", click on save report and save the default state.

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• How to change the Legacy USB Support on hp phoenix h9 - 1215t?

  I was wondering if anyone knows how to change the option of existing usb on the phoenix from HP support. I tried to find on the BIOS, but I had no chance.  I want to change it, is because I want to use my hardrive external without unplugging and pluggin it back everytime I turn on my computer.

  Hello

  I see that your particular PC is not active UEFI. You can check that the information provide in the BIOS.  Version 7 is not UEFI. If you start in the BIOS (tap button to power up the ESC) and then press F10 computer for installation.  Now, go to storage topics and then select Boot Order. You should be able to move the hard drive on it to the top of the list of Legacy devices and then save the settings.

  I saw on some latops legacy USB option as a separate selectable parameter.

• How to change the sequence of films in iMovie Theater

  By exporting iMovie projects in iMovie Theater, the sequence of films is determined by the time of download. How to change the sequence of films in iMovie Theater list?

  HI, breeaz,

  I have not found a way to change the sequence of films shown in the movie screen.

  If you access your movies in the Finder folder, then Ctrl-click on the folder of the theatre, you will find your movies to the poster

  in the alphabetical order in archival records.   I was not able to manually rearrange it.   They can be rearranged in some categories, through the view menu item at the top of the screen and the changes applied to the entire window, but it was not carrying at the display of iMovie.  In General, I'd like to make changes to the structure of iMovie in the finder.  It can cause serious problems.

  Best,

  Rich

• How to change the color of the mailbox that contains new messages

  I have Thunderbird sort my incoming mail into different mailboxes based on different criteria.

  Until recently, the arrival of new messages in any box, the title of this box (in the list, the left pane) became Red - which makes it easy for me to identify what boxes necessary to my attention. For some reason, it stopped. The incremental number indicating the number of unread to messages always changes, but the color of title remains black.

  Someone knows how to change the behavior in order to highlight the mailboxes containing new messages please?

  Thank you...

  by using a theme? or a userchrome file?

• Satellite Pro S330 - how to change the supervisor password?

  Hello!

  On a Satellite Pro S330L Windows is broken, so I can't access TOSPU. EXE. If I know the supervisor password, I can't enter the BIOS program. Bootsequence is HDD-..., so I can't boot from DVD! What can I do to install a new OS?

  Thanks for your help! JO

  Hi jonol,.

  If you know the supervisor password, everything is ok. Just so access the BIOS after you turn on the laptop and enter the password. Now you are in which you can change the BIOS boot order, remove the supervisor password, etc..

  Check this box!