How to change the database server in oracle Application 11.5.10.2

Similar Questions

• How to change the database of weblogic IP/Hostname?

  Our current development middleware stack contains:

  WebLogic, WebCenter, WebTier, and OAM all pointing to the same repository of db oracle via an IP address (because of host name resolution problems.)  Unfortunately the database server's IP has changed and I cannot start the weblogic administration console to change the IP address of the database.

  «"" "Guide to Oracle: http://docs.oracle.com/cd/E12839_01/core.1111/e10105/host.htm#CHDBBIAH »»»"

  Excerpt:

  Task 5 changing the system Data Source

  If you use the IP address in the data source definition, modify the system data source to use the new IP address for the metadata repository. To do this, you use the Oracle WebLogic Server Administration Console:

  Extract to start the WebLogic administration Console:

  < 27 August 2013 21:52:03 CEST > < WARNING > < JDBC > < BEA-001129 > < receipt exception creating connection to pool "SDM-CustomPortalDS": IO error: the network adapter could not establish the connection. >

  For this particular case, we can simply reinstall the entire stack but would prefer a clean resolution.

  There seems to be two issues here. The console is just a request, so I'll assume

  what you mean is that the Server WebLogic himself primer not, probably because some

  essential service depends on your data source, your data source cannot deploy, and this is the config insists

  on an initial capability greater than zero...

  Then, go to your config/jdbc directory, subdirectory of the main domain and for each data source

  you have, there will be an .xml file. Edit each file that represents a data source for the affected

  DBMS and change the URL of a given driver, to have the good, DBMS new machine name/IP address.

  Then try to restart WebLogic and see if you're OK...

• How to change the database metadata after OIM/OAM installed?

  Hello world

  To change the database/schema of metadata for our installation OIM/OAM.

  What I intend to do is:

  1. create the new db

  2. run the RCU for the OID and OAM utility.

  3. change the connection pool data source in the Weblogic OAM console.

  Is there anything else I need to do?

  I know, there was a connection to the database when I created the home field of the OID (via config.sh). I tried to run this script config again, but could not find a way to change the domain, nor I see how do in one of the consoles (much).

  Any help appreciated!
  D

  for OID, updated if necessary tnsnames.ora and data sources

  OAM, update data sources.

  For IOM, consult this section docID 1359656.1: configuration of JDBC connection of IOM in metalink demand side.

• How to change the default page template Oracle?

  Hi, jdev 12 c,

  When to create a new jsf page, I select the Oracle page three column template. And now I want to change elements in the model but cannot find the template file in the navigation application jdev tree?

  Where can I find it and make changes?

  Thank you!

  Check also on http://www.oracle.com/technetwork/developer-tools/adf/learnmore/july2011-otn-harvest-444848.pdf "how to open a page served as a library of ADF template.

  Timo

• How to change the email Notification in Oracle EM.

  Hi all
  
  Is it possible to change the email notification without re-creating the dbconsole, I use the Oracle 11 g Release 1 on Windows Server 2003 server. While I install the database I set up notification by email of the EM Console to [email protected], but now my mail id has been migrated to the new domain server ([email protected]), the issue is that my old post id has been disabled, good as now I get not a warning of the EM Console.
  
  Please advice...
  
  Thank you
  
  Shan

  Make sure you are also implemented in the timing of notification. PREFERENCES > NOTIFICATION > ANNEX. You can check that your rules are defined as: PREFERENCES > NOTIFCATION > RULE

• How to change the transfer server repository

  Hello

  I made a mess!  Play with the new 4.5 ViewServer I configured transfer server repository directly on my server from view. Now, I created a real transfer server, but I can't change the repository, unless I stop to see serve. But if I stop View server I can't reconfigure the repository...

  This information is written anywhere in the server (or vCenter db)? In this case, I can edit the record in the Database.

  Thanks in advance

  Kind regards

  Davide

  in this tutorial http://paulslager.com/?p=624 is teaching you to install the server transfer, put in maintenance mode follow by adding the repository. Please do the opposite way that putting maintenance, then remove the transfer server and the repository will be deleted as well together.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• Where (how to change the SMTP server

  Hello
  I use the OAS 10.1.2.0.2
  While installing OAS, I entered the name of the actual working SMTP - Server group.
  Sending the mails worked fine until today.
  Now, changed the name of the SMTP server and I wanted to change it (the name) in the application server, but I have not found one/all such location s where I had to change the name of the SMTP server.
  
  Is there anyone who can help me?
  
  Thank you very much.
  
  Best regards.
  
  Florian

  Refer to this:
  http://download.Oracle.com/docs/CD/B14099_19/core.1012/b13995/reconfig.htm#sthref681

  Thank you
  Shail

• How to change the windows server 2003 standard Edition sp2 activation key

  I'm going to conver physical server to a child in HyperV.

  When I create the machine of the child after that I converted with disk2vhd.exe small tool the physical server to the .vhd file, I got the message to reactivate windows, because it's new material.

  How can I do this?

  The operating system is windows server 2003 sp2 standard edition

  Thank you!

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• How to change the Web server from one server to another server

  Hi all
  
  Can you please provide the document to change the location of the web server from one server to another server?
  
  Thanks in advance.
  
  Thank you and best regards,
  Siva Prasad B

  Siva Prasad says:
  Hi Michel,.

  Coping PS_HOME just move the web server?

  And Michel and I said earlier that you need to reinstall your Web server... and to redeploy the PIA, which is not clear?

  Nicolas.

• How to change the drive letter with installed applications?

  My window is installed on the C: drive, and the application is installed on the D: drive,

  I just buy a new HARD drive and put it into drive E:, everything is copied from drive D: to E: drive and want to switch between the letter D: and E:.

  I tried to put in DISKPART, but when I restart my XP, the drive letter remains the same,

  If I change the drive letter directly in XP, it cannot be changed, because the applications are running.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  Make sure any DVD/CD or USB keys are not connected or set F assignments or beyond (MY DVD is S & T).

  Shut down the computer; power off. Disconnect the old drive (now D). Connect the new drive (now a copy of the old D). Power and boot to the desktop. Go into disk management and make sure the drive that contains Windows, the original C drive is always c. assign the new drive as D. Reboot the desktop. Check operation.

  Shut down the computer; power off. Plug the old drive. Restart the desktop computer. Enter Disk Management and assign it to E.

  Restart, then check the operation.

  Tom Ferguson

• How to change the source of data in application with the deployment plan

  Hello

  JDev Version: 12.1.3

  I can't change the source data with the deployment plan bc4j.

  Any example on this requirement?

  Thank you

  Anil

  Well, if you take a look at:

  http://Biemond.blogspot.com/2009/04/using-WebLogic-deployment-plan-to.html

  (one of the links in the link you get), you will see Edvin Biemond answwer:

  "you must change the configuration of module of the Application so that it uses a data source. and in the deployment of applications disable deployment of jdbc connection.

  Now you is enough to make the good source of data on each wls and deploy ears. »

  The simplest (and probably the best) way is, as I told you, and you are also mentioned: open up JDeveloper and change declaratively and re-download the ears

• How to change the database used by an existing VC Server?

  As we encounter the problem with the underlying database used by VC Server 2.5 U5, we want to create a new instance of SQL Server 2005 Express for VC server.

  Is it possible for us to say VC server to use the new database?  Should we change an XML file in particular?

  Furthermore, we wish to confirm that NETWORK adapter settings / vSwitch parameters is not lost when a new database is used.  Is this right?

  Thank you

  Hello

  Well in this case, since you will be using a new database, you will lose the data graphics perf, alarms, scheduled tasks, permissions etc.

  NETWORK card settings will not be lost since it is the ESX host settings.

  Thank you.

  If you have found this unit or any other answer useful, please consider to allocate points for correct or helpful answers. *

• How to change the Message of Houston Oracle

  Hello

  I have Oracle JDeloper 11.2.0.4 and I want to create an application from merger (ADF).

  I have a required field and I want to show a custom message when a user do not fill this field.

  By default, this message appears:

  "

  Error: A value is required.

  You must enter a value.

  Hello

  Select your Inspector of field properties and goto, there is a property "RequiredMessageDetail".

  write your message you want in this property

  Thank you

• How to change the display size of an application

  ON underworld empire when you open the application, the image size is huge and I can't make it smaller. How do you go on an iPad 2 Air

  Try double tapping with three fingers to return to normal size. Then go to settings > general > restrictions > turn off the zoom.

• How to change the IP address of the linux server

  Hello
  
  I want to change the IP address of my RHEL 4 server. I use 10.2.0.4 with R12.1.3 E-business and my instance is the only level. I have doc "How change the IP address on a R12 EBusiness Suite Installation [ID 554843.1]" but it could not help me.
  
  
  Thank you
  Krishna

  Salvation;

  Please see below note and links. If you have any questions please update thread:
  How to change IP address in an Oracle Applications environment [ID 553318.1]
  How to change IP on a R12 EBusiness Suite Installation [554843.1 ID]

  See also:
  http://AppsLab.blogspot.com/2009/08/IP-address-change-on-existing-R12.html
  change the IP Address of the server.

  Respect of
  HELIOS