How to change the database used by an existing VC Server?

Similar Questions

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• How to change the rendering used for video playback in Windows Media Center Version 6 engine

  I usually use other media players, but I would like to first of all using Windows Media Center. However for the moment video playback is not good because of the weird colors (everything is displayed in black and Red instead of normal colors). When you use other media players, I use the Haali rendering engine which gives good results for video playback.

  Can you tell me how to change the rendering used by Windows Media Center?

  Also, I noticed the same weird color effect in Windows Media Player 11.

  Hi Woobee,

  1. What is the brand and model of the computer?

  2. what graphics card use on the computer?

  If you are using an Nvidia graphics card on the computer, in the Nvidia Desktop Manager, you will find an option for saturation to ensure it is set to 100%.

  And if you are any other graphics card on the computer and search for a similar option for saturation.

  If the previous step fails in Windows media player, so be sure that the hue and Saturation are defined by default.

  1. click on the arrow on the tabplaying , point to enhancements, and then clickcolor picker.

  2. do one of the following:

  1. to return to the default color, click thereset link.

  Also, make sure that the video settings are set by default.

  1. start the playback of a file.

  2. click on the arrow on the tabplaying , point to improvements, and then clickvideo settings.

  3. click onreset.

  Check also in Windows Media Center if the

  1. on theStart screen, go to tasks, click settings, clickgeneral, then Visual and sound effects.

  2. undercolors ensure that Windows media center standard is enabled.

  Turn off Visual and sound effects in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-Visual-and-sound-effects-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to start the database using CRS to start the database instance

  Dear Experts,

  How to start the database using CRS to start the database instance

  As a solution: remove the write permission on the/etc/oratab user database to prevent update to arrive.

  There is no harmful effects known to CRS / RDBMS operation if this workaround solution is used. This has been discussed in Bug 13028802.

• How to know the database uses pfile or spfile?

  Hi guru
  
  How to know the database uses pfile or spfile?
  
  
  
  Thank you

  Thank you for this question of doc!
  Please type in sql * show spfile parameter.
  If it is empty, you do not use a spfile.

  --------------
  Sybrand Bakker
  Senior Oracle DBA

• Help, how to query the database using pagination

  Hello
  
  How to query the database using paging for large data.
  
  any API for this?
  
  Thank you in advance!

  Hello

  You can specify XmlQueryContext::Lazy as the type of assessment and only call XmlResults:: next() comes as many times as you need.

  John

• How to change the PCTFREE parameter for an existing table

  How to change the PCTFREE parameter for an existing table?
  
  Guys can you help me please

  Hello

  Of course it is possible.
  In this case you would export the table from the database (using old style exp)
  Start the import with the index_file option to generate the table/index instructions
  Modify the file created and updated the PCTFREE and remove any that need to be performed (default, if I remember correctly, he comments on the statements of the Index)
  Run the file for the table and the index created
  After that start the import with the option "ignore = yes".

  Make sure that you export only this particular table using "tables =
  Also in importing the "ignore = yes" will also be important data that still exists.

  In my view, however, this is not what you want to do. It's more complex, sensitive failure and the table should be deleted, so users are affected unnecessarily long.

  Success!
  FJFranken

• At the point of the map, how to change the font used

  Hello

  I want to change the font used in the bubble in Mappoint. I don't talk about boxing of text or the text size, I just want to change the police and use "Microsoft sans Serif".

  Is this possible?

  How to do?

  I used Windows 7,

  Best regards

  You can ask in the following forum because they are more likely to have relevant experts:

  Highway, streets and Trips, MapPoint .

• How to change the database metadata after OIM/OAM installed?

  Hello world

  To change the database/schema of metadata for our installation OIM/OAM.

  What I intend to do is:

  1. create the new db

  2. run the RCU for the OID and OAM utility.

  3. change the connection pool data source in the Weblogic OAM console.

  Is there anything else I need to do?

  I know, there was a connection to the database when I created the home field of the OID (via config.sh). I tried to run this script config again, but could not find a way to change the domain, nor I see how do in one of the consoles (much).

  Any help appreciated!
  D

  for OID, updated if necessary tnsnames.ora and data sources

  OAM, update data sources.

  For IOM, consult this section docID 1359656.1: configuration of JDBC connection of IOM in metalink demand side.

• How to change the fonts used to display the list of emails on the homepage?

  Looking at my Inbox or other e-mail folder, the font used to display the list of emails in folders - gives me a headache.

  How can I change this font? Is there an add-on? Something in their profile?

  Ideally, I would like to change the background color of white also. (Perhaps the color on this page where I ask the question. "It's easy to read, the font and the color!)

  I've been a programmer in a past life, so I'm tech abreast. I am new to use Thunderbird (I used FF for several years.)

  Thank you!!

  Yes, to change the font, you can use this addon:

  • Theme font & size changer

  Also, try to use themes:

  • https://addons.Mozilla.org/en-us/Thunderbird/themes/
  • https://addons.Mozilla.org/en-us/Thunderbird/complete-themes/

• How to change the database of weblogic IP/Hostname?

  Our current development middleware stack contains:

  WebLogic, WebCenter, WebTier, and OAM all pointing to the same repository of db oracle via an IP address (because of host name resolution problems.)  Unfortunately the database server's IP has changed and I cannot start the weblogic administration console to change the IP address of the database.

  «"" "Guide to Oracle: http://docs.oracle.com/cd/E12839_01/core.1111/e10105/host.htm#CHDBBIAH »»»"

  Excerpt:

  Task 5 changing the system Data Source

  If you use the IP address in the data source definition, modify the system data source to use the new IP address for the metadata repository. To do this, you use the Oracle WebLogic Server Administration Console:

  Extract to start the WebLogic administration Console:

  < 27 August 2013 21:52:03 CEST > < WARNING > < JDBC > < BEA-001129 > < receipt exception creating connection to pool "SDM-CustomPortalDS": IO error: the network adapter could not establish the connection. >

  For this particular case, we can simply reinstall the entire stack but would prefer a clean resolution.

  There seems to be two issues here. The console is just a request, so I'll assume

  what you mean is that the Server WebLogic himself primer not, probably because some

  essential service depends on your data source, your data source cannot deploy, and this is the config insists

  on an initial capability greater than zero...

  Then, go to your config/jdbc directory, subdirectory of the main domain and for each data source

  you have, there will be an .xml file. Edit each file that represents a data source for the affected

  DBMS and change the URL of a given driver, to have the good, DBMS new machine name/IP address.

  Then try to restart WebLogic and see if you're OK...

• How to create the database using the command line?

  Hi all
  
  Win7
  10g or 11g
  
  I want to create a new database using a script.
  
  I set up my new SID and oracle_home.
  
  Then sqlplus / DBA.
  
  then I execute a common script...

  startup nomount;
  create database PRODB
         logfile group 1 ('z:\oradata\PRODB\redo01.log',
                          'z:\oradata\PRODB\redo01b.log') size 50M,
                 group 2 ('z:\oradata\PRODB\redo02.log',
                          'z:\oradata\PRODB\redo02b.log') size 50M,
                 group 3 ('z:\oradata\PRODB\redo03.log',
                          'z:\oradata\PRODB\redo03b.log') size 50M,
                 group 4 ('z:\oradata\PRODB\redo04.log',
                          'z:\oradata\PRODB\redo04b.log') size 50M
         character set AL32UTF8
         datafile 'z:\oradata\PRODB\sysPRODB.dbf' size 500M
         sysaux datafile 'z:\oradata\PRODB\auxPRODB.dbf' size 300M
         undo tablespace undo
                 datafile 'z:\oradata\PRODB\undoPRODB.dbf' size 100M
         default temporary tablespace temp
                 tempfile 'z:\oradata\PRODB\tempPRODB.dbf' size 150M;
  @/opt/app/oracle/product/10.2.0/db_1/rdbms/admin/catalog.sql;
  @/opt/app/oracle/product/10.2.0/db_1/rdbms/admin/catproc.sql;
  connect system/manager;
  @/opt/app/oracle/product/10.2.0/db_1/sqlplus/admin/pupbld.sql;
  exit;
  
  
  
  SQL> startup nomount;
  ORA-12560: TNS:protocol adapter error
  SQL> create database PRODB
    2         logfile group 1 ('z:\oradata\PRODB\redo01.log',
    3                          'z:\oradata\PRODB\redo01b.log') size 50M,
    4                 group 2 ('z:\oradata\PRODB\redo02.log',
    5                          'z:\oradata\PRODB\redo02b.log') size 50M,
    6                 group 3 ('z:\oradata\PRODB\redo03.log',
    7                          'z:\oradata\PRODB\redo03b.log') size 50M,
    8                 group 4 ('z:\oradata\PRODB\redo04.log',
    9                          'z:\oradata\PRODB\redo04b.log') size 50M
   10         character set AL32UTF8
   11         datafile 'z:\oradata\PRODB\sysPRODB.dbf' size 500M
   12         sysaux datafile 'z:\oradata\PRODB\auxPRODB.dbf' size 300M
   13         undo tablespace undo
   14                 datafile 'z:\oradata\PRODB\undoPRODB.dbf' size 100M
   15         default temporary tablespace temp
   16                 tempfile 'z:\oradata\PRODB\tempPRODB.dbf' size 150M;

  I always hit it
  
  SQL > startup nomount;
  ORA-12560: TNS:protocol adapter error
  
  But if I run it on Linux is good.
  
  
  Help, please...
  
  
  Thank you very much
  
  zxy

  yxes2013 wrote:

  I want to create a new database using a script.

  Suggestion. DBCA allows to generate the database model and use the option "+ Save as scripts + ' (no need to create the database).

  In the scripts directory, there will be a couple of shell and SQL scripts to create the database. Use them as your CLI model for the creation of a custom database. (I guess that DBCA works the same on Windows as it does on Linux).

  Another option, if you are using Oracle XE, is to copy ORACLE_HOME/bin/createdb.sh (probably a + .cmd on Windows) script and change for use. If you manually add non-XE features to the script (such as the installation of the Java virtual machine) If you want a database of SE or EE. (whereby DBCA scripts are a better answer).

• How to copy the database using rman file from another location.

  You can clone data base using the files of rman backup from somewhere else (on the server to clone).
  
  I have two server db source and clone db server.
  I normally copy the files of RMAN backup to clone server (under the same folder structure, as it was on the source server).
  
  The purpose of the test, IE I don't have same partition and free space on the source server and the clone.
  
  I usually use under notes to the clone.
  http://trysellit.com/hosting/Ttrail/Fajr.php?doc=wtrail & ND = 0556200
  
  I would try to explain for example again.
  In source server, my rman backup are stored in / U01 and clone server, I copied the files of rman /u04. What step I should take to clone to work anywhere else?
  
  Using Oracle 10 g on Linux RedHat.

  sape007 wrote:
  Thanks Ken & PrafullaNath.

  BUT my question is: how to transport .dbf files in another place on the clone (I already do).

  Rather:
  The clone is on another server. How to restore by copying the RMAN files from another location on the clone. Please read description above in its entirety.

  Sorry for not being clear.

  Please see my video tutorial. In this tutorial that I take backup of the database, copy the backup to the different server and perform a recovery disaster

• How to change the name used when I downloaded more than 80 photos and classified with the wrong name

  I downloaded more than 80 pictures and inadvertently gave them all the wrong name. I know that I can change them one at a time, but how I can change the whole set at once?

  Open the folder the photos are in and go to... Edition / select all...
  Right-click the first picture of the highlighted (miniature group
  (or file name), and then from the menu choose... Name change.

  Enter a descriptive name for the group... Summer vacation
  .. .for example... also add a number...

  Summer vacation (10001)... jpg...

  Then left click... Enter... and Windows will be consecutively
  the remaining photos.

  Summer vacation (10001)... jpg
  Summer vacation (10002)... jpg
  Summer vacation (10003)... jpg

• How to change the color using JavaScript

  How you specify the color of a shape by using JavaScript to animate?  The code below does not work.  I'm not find documentation on how to work with JavaScript in Animate out snippets of code in box provided.

  this.redBox.style.color = "#00FF00";

  this.redBox.style.color = "rgb (155, 102, 102);

  The API chart in canvas mode is CreateJS. CreateJS is very well documented.

  EaselJS v0.8.2 API Documentation: Graphics