How to change the duration in slideshow Dreamweaver?

Similar Questions

• How to change the duration of the clip in Movie maker

  Im trying to use windows movie maker. does anyone know how to change the duration of the clip. I made a movie of my meetings previous families, but it is different duration time. I'm still doing, help menu does not explain.

  I tried different methods to change the time on the tag's options, but it does not change the duration of the clips

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Rickysbiz,

  You can try to cut the clip and take a fresh start or endpoint for the clip to set the duration. The start trim point determines when the clip will start playing, and the end trim point determines when the clip stops in your project and final film.

  To trim a video clip

  1. If you are in the Storyboard view, click, and then on the timeline.

  2. in the timeline panel, click the clip you want to cut.

  3 use the controls to play under the preview monitor to find the point where you want to cut out the clip.

  4 follow these steps:

  ·        When the playback indicator is at the location where you want the video or audio clip selected in replay, clickClip and then click TrimBeginning.

  ·        When the playback indicator is at the location where you want the video or audio clip selected to stop playback, clickClip, and then click TrimEnd.

  You can access the link below to learn more about wrking with clips in Windows Movie maker.

  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-Maker

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to change the ascii mode in dreamweaver?

  How to change the ascii mode in dreamweaver?

  Dreamweaver should automatically switch to ASCII as you can see from the following FTPExtensionMap.txt content

  

  In case you want to check your FTPExtensionMap.txt file, it can be found in the Configuration file according to the Dreamweaver crashes at startup

• How to change the duration of a project on Adobe PR

  I'm not a big user of Prime Minister if can someone please explain how to change the duration of a project?

  The length of the sequence depends on the length of the added video.

• Windows Movie Maker-how to change the duration of the picture in a project

  Duration of the image in Windows Movie Maker

  Using windows movie how can maker, I change the duration of the photo on a project that has already been registered?

  Windows Live Movie Maker WLMP Project file?
  Try to select (highlight) a clip and go for...
  Change the tab and select duration

  Vista Movie Maker 6?... See more...

  Recorded in what format?

  . WMV movie file? You cannot change the
  duration of the photos.

  . Project MSWMM file? See the following...

  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  To the timeline, you can change the
  duration for each clip manually. Drag the
  Garnish handle left or right to increase or
  reduce the duration. You can see a
  Tip displaying the change.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.

• How to change the duration of the composition?

  I need to change the duration of the composition in frames per seconds unit, how do?

  Change the time indicator timeline by holding down the control key and clicking to change management of two seconds. Your composition settings panel will reflect the setting in the time line.

• How to change the font size in dreamweaver

  Hello?  It is really a bit overkill for a simple question.  could someone please help with this?

  and while we're at it there ' was a fly, I want to kill with a hammer

  If by changing the font size you want to say in your web pages, the answer is use CSS with values in px, em or %.

  Body {size are: 100 %}}

  p {make-size: 1em}

  H1 {make-size: 3em}

  H2 {size are: 2.5em}

  H3 {make-size: 2em}

  H4 {size are: 1.5em}

  and so on...

• How to change the duration of the music on the menu?

  Adobe Premiere Elements 7.0 - Windows Vista 64-bit

  I'm getting there. (Thanks for your help!)

  I started from (or almost) "scratch" so I would have a nice "clean" to burn to a DVD video. I reset all my chapter markers. Perfect preview. I chose my menu and adjust movement scene selection buttons. Beautiful preview. I don't like the 'default' music that comes with the menu, I chose. I read some old threads here and found that there is a limit of 30 seconds, so I used Audacity to cut a clip WAV which is 16.23 seconds of time to use as a loop. Here's the problem:

  I clicked on "Browse" and select the same music video for the main Menu and each of the three pages of successive scene selection. Works very well on the pages of scene selection, but will not play the main Menu after 13 seconds for some inexplicable reason. I tried to manually adjust the 'period' to 16,23, but he snaps back to 13 as soon as I hit an excerpt.

  I closed the program, restarted my computer, make a new (identical) music video (just in case where the main Menu did not want to "share"), but it will not be it. He played the first 13 seconds then abruptly in a loop at the beginning, which is NOT a * smooth * transition - but it would be, IF she would play the second entire 16,23 as do other pages of menu with no problems.

  I'm open to suggestions, but I hope I don't have to start over again. Oh, BTW - I tried to move to a completely different disc Menu, just out of curiosity, and we played the music clip in full on the page main Menu no problem... but I don't like the look of this menu, I want the other one - one who gives me the pain (of course). Don't understand why it would work on one and not the other.

  Please notify. Thanks in advance. Cheers, Val

  To answer a question on one of you (Bill?) on the previous thread on my original material.

  It was originally a PAL video tape, DVD NTSC-converted. It's all on my computer now - four VOB files: @ .99GB three each and the other @ 691 MB. It's a show of Peter Allen TV special an hour in Australia. I remove advertising and make a menu that will allow the selection of each song individually. I want more of a 'concert' and less than a "TV show" as long as the finished product.

  I just looked at him - for the main menu there is a maximum of 13 seconds and 20 frames. For the selections of scene 30 seconds.

  

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Is it possible to change the duration of the montage in first Pro CS5.5?

  I'm used to working on Avid systems where the length of the sequence is determined by the last asset in the timeline panel, where it ends. I'm editing commercials and don't need or want a delay of 10 minutes. Does anyone know how to change the duration of the timeline, as you can do in After Effects? I've tried everything I can think of and it seems that it's not possible... Thank you!

  Your timeline ends with the last media file...
  do not include in addition.  That's what first.

  You can use the backslash (\) to adapt to your timeline view
  the length of the assets it contains.

• make a slideshow in movie maker, how to extend the duration of a photo of a single image

  make a slideshow in movie maker, how to extend the time image (time peak is seen) a single image that is different from the default time?

  I posted the Live Movie Maker tutorial because
  your question is posted in a forum for Windows 7.

  In Vista Movie Maker 6... There are three ways
  to change the duration of a specific picture that
  is already on the timeline.

  FWIW... the change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  (1) you can increase or decrease the duration
  a specific image by adding an effect:

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  (2) for the timeline... you can change the
  duration for each clip manually. Move your
  pointer on on the edge of an element up to the
  you see a double arrow. Now, drag the
  double red arrow... you will see a ToolTip that
  Watch the evolution of life.

  (3) the term may photo on the timeline
  easily be doubled by simply adding another
  an instance of the same photo next to him.

• How can I change the duration of an MP3 file I downloaded? For example, I have a song that 1.5 last minute, but I want to only keep the 21 seconds. How can I culture there?

  How can I change the duration of an MP3 file I downloaded? For example, I have a song that 1.5 last minute, but I want to only keep the 21 seconds. How can I culture there?

  Your best bet would be looking for writers to mp3/wave. There are a few very good freeware/shareware sound there. I suggest this so that you can choose what format you want to save your file cropped as.

• How do I change the duration of an image in movie maker

  I can't understand how do!

  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  You can change the duration for each clip
  manually. Move your pointer autour the
  edge of an element until you see a double red
  arrow. Now, drag the double red arrow...
  you will see if show a ToolTip displays the duration
  train to change.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.

  The following articles include some useful information:

  Windows Vista - add to the credits and titles of movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/Add-movie-titles-and-credits-in-Windows-Movie-Maker

  Windows Vista Movie Maker - work with clips in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-Maker

  Windows Vista - audio setting in Windows Movie Maker: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/adjusting-audio-in-Windows-Movie-Maker-frequently-asked-questions

• Dreamweaver CC: How to change the color of the selected text

  Maybe a stupid question, but I can't seem to figure it out, even with searches on the web.  I want to change the color of a single word in my HTML document.  Can anyone offer advice?

  I can change some styles of the selected text (bold, italic, etc.), but do not understand the color.

  Also, I know how to change the color of the different elements using CSS.  But for the selected text in an element, CSS here the simplest solution?

  Thanks in advance.

  carlg79335635 wrote:

  Thank you for that.  But I don't have a color option in my menu format.  It ends at some CSS Styles.  I have to allow him anywhere?  I use Dreamweaver CC.

  Yes.  I checked it and in CC DW, there is not a way to do as I suggested previously.  I was watching DW CS6 and he got it.

  Looks like you'll need to teach how them to manually code.  This will make them think about what they are doing and so concentrate better.

• Windows Movie Maker-how to change the length of the duration of viewing by image

  Windows Movie Maker speed

  Can someone help me change the duration of viewing by image for the photos I moview Maker?  They are "set" 5 seconds per image and I want to speed it up a little.

  Thank you

  Can someone help me change the duration of viewing by image for the photos I moview Maker?  They are "set" 5 seconds per image and I want to speed it up a little.

  Thank you

  ===================================
  I wrote the following to Win XP Movie tutorial
  Maker 2.1, but it might be useful for Vista
  Filmmaker 6:

  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  You can change the duration for each clip
  manually. Move your pointer autour the
  edge of an element until you see a double red
  arrow. Now, drag the double red arrow...
  you will see if show a ToolTip displays the duration
  train to change.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to change the date of transition to the jpuery.nivo.slider.pack.js (Dreamweaver template)

  I have a slide show, and the time is 2 seconds.  I wish I had a slide or fade right from one slide to another.  How do I do that?  I am able to change the pause time, but may not know how to change the transition.  Here is the part of the code:

  1. a.fn.nivoSlider.defaults = {effect: 'fade', animSpeed:50, pauseTime:2e3, startSlide:0, directionNav:true, directionNavHide:true, controlNav:true, is controlNavThumbs:fal, controlNavThumbsFromRel:false, controlNavThumbsSearch: ".jpg", controlNavThumbsReplace: "_t humb.jpg", keyboardNav:true, pauseOnHover:true, manualAdvance:false, captionOpacity:.8, prevTex t:"Prev",nextText:"Next",randomStart:false,beforeChange:function() {}, event: function () {}, {slideshowEnd:function(){},lastSlide:function(){},afterLoad:function()}} "}

  I can change the pause time (value 2 seconds now), but I tried to change the animSpeed for: 1 and: 100, but no change.  I tried to change the effect: "default", "fade", and

  "sliceDownRight" and others in the code below, which is beyond the performed: 'fade' code I'm working with.

  if(d.Effect=="Random") {var i = new Array ("sliceDownRight", "sliceDownLeft", "sliceUpRight", "sliceUpLeft", "sliceUpDown", "sliceUp DownLeft", "fold", "fade", "boxRandom", "boxRain", "boxRainReverse", "boxRainGrow", "boxRainGrowR everse") }

  Can anyone help?

  Thank you

  Most widgets have a constructor that allows you to apply changes to the functioning of the widget.

  Here is the constructor for the Nivo Slider settings

  $('#slider').nivoSlider ({}

  effect: 'random', / / Specify defines as: "bend, bland, sliceDown.

  slices: 15, / / for the animations of the slice

  boxCols: 8, / / for the animations of the box

  boxRows: 4, / / for the animations of the box

  animSpeed: 500, / / speed of slide transition

  pauseTime: 3000, / / how long each slide will show

  startSlide: 0, / / Set from slides (index 0)

  directionNav: true, / / next & previous navigation

  controlNav: true, / / 1,2,3... Navigation

  controlNavThumbs: false, / / use tiles for a control Nav

  pauseOnHover: true, / / Stop animation while hovering

  manualAdvance: false, / / hand strength of transitions

  prevText: 'Prev', / / Prev directionNav text

  nextText: 'Next', / / Next directionNav text

  randomStart: false, / / Start on a slide at random

  Beforechange: function() {}, / / triggers before a transition between slides

  Event: function() {}, / / triggers a transition between slides

  slideshowEnd: function() {}, / / triggers after all slides should have been disclosed

  lastSlide: function() {}, / / when the last slide is indicated

  postcharge: function() {} / / triggers when the cursor is loaded

  });

  The effect parameter can be one of the following:

  • sliceDown
  • sliceDownLeft
  • sliceUp
  • sliceUpLeft
  • sliceUpDown
  • sliceUpDownLeft
  • fold
  • fade
  • random
  • slideInRight
  • slideInLeft
  • boxRandom
  • boxRain
  • boxRainReverse
  • boxRainGrow
  • boxRainGrowReverse