How to change the graphics rather than the windows screen resolution

Similar Questions

• How to change the Welcome screen in my windows 7 ultimate 32 bit OS

  I am not able to change my wellcome screen in my laptop.

  Hi Raymond,

  Thanks for posting your query on the Microsoft Community.

  I understand that you can not change the Welcome screen in Windows 7.

  Provide us the following information to better help you.

  • You get the error message?
  • You will remember to do recent changes on the computer before this problem?

  I suggest you to check the solutions provided by MarkMadden and check if this may help:

  http://answers.Microsoft.com/enus/Windows/Forum/Windows_7-desktop/how-do-i-change-logon-screen-in-win-7-ultimate/cae8fadc-426a-E011-8dfc-68b599b31bf5

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Response with the status of the issue to help you further.

  Thank you.

• Qosmio G20: How to get the higher screen resolution on monitor external 22 "

  I have a Qosmio G20 and today I bought a Samsung 226BW the external display. The Samsung has a max resolution / optimal 1680x1050px. The manual SAIS the laptop Toshiba supports a resolution of the external display up to 2048 x 1536...

  I tried now all sorts of settings, but the highest resolution I get on the external monitor is 1440 x 900 (-even as the laptop).
  1440 x 900 display 22 '' is not enough for serious photo editing;. It seems simply blur.

  What I am doing wrong? I deeply appreciate answers/comments; because if 1440 x 900 is all I can get, I have to return to the external monitor to the store...

  If someone is so good!
  Espen.

  Hello

  The available screen resolution depends on the graphics driver. You cannot choose the favorite one from the 1680 x 1050 resolution because it doesn t graphics card driver supports.

  Perhaps an update of the graphics driver could help.

  By the way; an inf file must be provided by the manufacturer of the monitor. You can install this file right-click and choosing install.

  Check also these forum discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19677

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19570&MessageID=71767

• How to change the windows boot screen image 8 other than the default values

  How can I change the screen image of departure other than those supplied by microsoft.

  I want to change the image of metro/Start screen because I do not have the funds provided by microsoft.
  Help!

  I know that your frustrations!  I have the same preference, it is currently not possible - but there is an update on its way (you can search for information on - it is called 8.1 Windows or blue Windows) which allows you to put photos or whatever behind the Windows 8 UI splash screen.  Update should be soon maybe some time this summer - August.

• How to change the Windows Live ID (@ 2011)?

  Hey!

  I want to change my ' Windows Live ID of "in my"Account information"page, where is" Windows Live ID:[email protected] - change ", but the windows live said:"Your Windows Live ID cannot be changed at this time."

  And I tried it several times and with several computers and MSN online MSN etc offline... nothing.

  So, how can I change my "Windows Live ID"

  Kind regards!

  A question of Hotmail or Windows Live Mail?
  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/00015cf4-4654-4296-8aa6-b88ae3bcbde1
  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• How to change the windows xp logo

  How to change windows-XP Start/Backup well come logo

  You cannot change this, as it is a part of the windows

• How to change the Windows Vista sound recorder

  Does anyone have information on how to editing can be done in sound recorder in Windows Vista, such as the removal of noise, etc. ?

  You would not be able to change the sound by using the Windows Vista sound recorder after recording is done, you would need a different for that one application. In this case, you can instead to fix the problem before registration, you can refer to the link below to get instructions on how to reduce POPs, clicks or other distortions.

  http://support.Microsoft.com/kb/936693

  For more information about how to troubleshoot audio recording in Windows Vista, you can check the link below as well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems

• How to change the Windows settings to allow for the camera driver must be installed

  My laptop doesn't recognize my digital camera. The correct software is responsible for the camera. An error message indicates that Windows will not allow access to the driver. How can I change the settings in Windows so that the driver for the camera is recognized?

  Help please!

  Hi Brian,.

  1. are you able to install all device drivers?
  2. which antivirus program is installed on your computer?
  3. don't you make changes to the computer before the show?

  The question seems to be as a program is blocked.
  I suggest you perform the clean boot and check if the problem persists. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  I hope this helps.

• How to change the LCD screen?

  I have a t61p with LCD 1900 * 1200 WUXGA

  but the police is too small for me, I can fix the windows police, but in some applications, the fonts are not adjustable. It is therefore very difficult.

  how much I pay if I ask lenovo to change a lcd display with a lower resolution for me?

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-67980.html

• How to change the Windows shortcut to open private browsing?

  I want to change the shortcut "C:\Program Files\Mozilla Firefox\firefox.exe" for open Firefox in private while browsing mode. Although 'firefox-private-window' works when I run (Windows + R), I'd like to be able to open Firefox by clicking a shortcut.

  -Private-window switch should be outside the quotation marks surrounding the path to Firefox program.

  • "C:\Program Files\Mozilla Firefox\firefox.exe"-private-window

• Satellite 1800-804: how to change the standard screen?

  Hello. I'd be very grateful if someone out there could help me. I have a 1800-804 Satellite which I removed the screen and instead connected to a screen size of Compaq and it works very well for the last 12 months so much so that I use it as my main office.

  My problem started when I downloaded a movie and I wanted to watch it on my tv. I went in the set up screen and it goes from 1 to 2 (because told me in this way that would turn screen to the TV screen).
  It was my mistake.

  Now I can't get it reversed back to the normal screen. The on-screen display, it's as if it is in ECONOMY MODE (large icons) that can only make?

  Thank you.

  Hello

  Which screen has low resolution? The external monitor or laptop screen?
  I guess you display resolution has been set to the lowest value.
  The resolve you should go in the graphic properties and select the view then increase the screen area and colors.

  Also check the advanced option. In the peripheral view tab, you will find the different options and device monitoring multi section where you can set the parameters on screen LCD/CRT or LCD/TV

  Check it out.

• How to change the window font sizes help LabVIEW?

  I read the help documents LabVIEW quite often, and the default fonts are too small, making it very difficult to read for long period of time. I couldn't find anything when I change the font size.

  Please let me know.

  Thank you.

  Help is HTML and at least, in Windows, it seems that IE is used to display. Most web pages have a defined font size to control the appearance of the page, but you can ignore it by going to Internet Options (accessible from both help screen) > accessibility (which is a button hidden in the bottom of the page). I see no using LabVIEW to actually specifying the size, but at least for me it made bigger. Note that this affects any web page that view you in Internet Explorer.

• How to change the windows wallpaper

  Hello

  I'm looking for a solution to change the wallpaper of windows in a VI.

  Anyone have an idea? A library to use?

  Thank you

  Hi jeremy,.

  Are you looking for this one?

• How to change the windows server 2003 standard Edition sp2 activation key

  I'm going to conver physical server to a child in HyperV.

  When I create the machine of the child after that I converted with disk2vhd.exe small tool the physical server to the .vhd file, I got the message to reactivate windows, because it's new material.

  How can I do this?

  The operating system is windows server 2003 sp2 standard edition

  Thank you!

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• How to change the Welcome screen and logon?

  I want to change the colors at least on both screens or preferably all screens themselves, is that possible?

  Hello

  Here are a few links that should prove beneficial to get a resolution for you inquiry.

  http://support.Microsoft.com/kb/314493

  http://www.Microsoft.com/windowsxp/using/setup/tips/welcome.mspx

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think