How to change the location of the Documents on the D drive?

Similar Questions

• Satellite P10 - how to change the HARD drive?

  Hello

  I want to change my Satellite P10 for a bigger HARD drive.
  But I Don t know how to remove the DvD drive.

  On this laptop, I mean that the HARD drive is under the DvD drive.

  Please help me, if you know how to change the HARD drive.

  Welcome them

  Mister_X

  Hi Frank,.

  I'm not too sure about the P10, but on my A30 the hadr drive is under the DVD-ROM. It is secured in place by a single screw (accessible from under the laptop), and when it is deleted the DVD-ROM slides just to place revealing the hard drive.

  The hard drive is fixed with 4 screws (2 on each side)

  HTH

• HELP: How to change the hard drive on the envy 15

  Hello

  I have a problem with my PC. I need to change the hard drive but I can't open the top box to access the old hard drive.

  someone has experienced the same problem?

  OME information on my computer:

  HP ProtectSmart

  model: 15-u060nz

  OS: Windows 8.

  in advance, thank you

  Pascal

  Hello everyone,

  great, I found, I have reality my colleague one saw 2 hidden screws.

  After that no problem to replace the hard drive.

  Thank you very much

  Take care

  Pascal

• Satellite M30 Pro: How to change the optical drive?

  Hello
  could someone please give me a hand on change/replace the optical drive on my Satellite Pro M30?

  Alas, my drive is a DVD-ROM/CD-RW. I have another with the functionality of DVD burning (burner Super Multi of Matsu * a). I wonder how I could replace, because it is not possible to easily slide the bones?

  Thank you.
  Jan

  Hello

  To remove the optical drive, he can just remove the 2 screws that are placed at the bottom of the unit on the side of the road. Then you can simply drag the drive outward to disconnect the connector on the system board.
  The player is placed in the plastic frame. You must therefore also this framework for a new disk.
  Remove the plastic of the unit frame, only to remove 4 screws.

  Good bye

• How to change the hard drive from the slave to master drive?

  Original title: drives hard slave to master, how.

  I try to use an external hard drive carrier to download my data files on my laptop. One worked as a data file. The second and third would not show.
  They can be slaves, so how can I change the masters so that I can download them?

  If the suggestion to use disk management doesn't help you, please explain what you mean by "first' and 'second and third."  You have several hard drives, multiple partitions on a single physical disk, or just several files?

  Also explain in detail the steps you take to 'download' (i.e., transfer) the files to your laptop.

  Status 'Master' and 'slave' is not applicable to your situation.

• How to change the hard drive icon in windows Explorer in windows 8

  I am running windows 8 pro and one of the icons in Explorer windows hard drive suddenly changed to a blank sheet of paper icon. Is there a way to change my icons to the default values that were there.

  The icon cache cleaning will be a good idea.

  WARNING: Donot proceed if you do not know how to run a command prompt.

  Click on the following link to find out how to clear the cache of an icon.

  http://www.WinAbility.com/how-to-erase-icon-thumbnail-cache-Windows-8/

• How to change the HARD drive internal with the boot agent intel

  HP Pavilion DV 6135nr

  Windows XP media center edition

  Replaced the drive HARD internal and have error with boot agent intel.

  How to disable a intel boot agent.

  Helllo machadoas,

  You want to disable the Intel boot agent.

  You should be able to load in the BIOS at startup by pressing F10, go to boot order and move boot agent under the HARD drive.

  Here is a link that talks a little more about the boot agent.

  Let me know if it helps.

• 15-ac110nf HP: HP 15-ac110nf how to change the hard drive

  Dear support,

  I would like to replace the hard drive on my laptop to put an SSD instead.

  The problem is that I fight to take it apart and get the disk.

  Could you please refer me to a documentation or procedure?

  I remove all screws including that of the CD/DVD drive, but I can't go any further. I wonder if there are additional screws hidden under the 2 rubbers at the level of the hinges?

  Thank you very much in advance.

  KR,

  Samuel Galiez

  Hello again,

  Its a glue which is under the rubber, but you will need to remove the rubber two bumper to get to the 2 screws under them before you can go down the basic coverage.

  I think that HP will send you the same guide I did since it is the service of repair centers guide.

  But you can of course try and contact them

  Here is the link for the telephone number. Take your country and give them a call.

  Link: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

• Updates will not work as C drive is full and I can't find out how to change the default drive?

  My "C" drive is it is full and I don't know what programs and files should be able to uninstall unused programs. Those that I was able to uninstall I was doing ground but that's left, I don't know what are the components.
  This has affected security downloads and as a result, I am currently without protection.
  The Firefox version I'm currently using is 40.0.2 as the update might fail for lack of room.
  How to fix this and get my computer working properly / so far, I am at a loss?
  Is it possible to move the programs to other readers?
  Is this something that I'll be able to fix it with help or do I have to take someone who knows what they are doing?

  You must ensure that there is enough space on the Windows system drive (drive C) to ensure the proper functioning.

  You can check if you can move (uninstall and reinstall) some programs in another drive and possibly move on data as well.
  You can also check the Windows temp (% RPM, variable environment % TEMP %) to see if you can clean up files there.

  You can perform a custom Setup with most programs including Firefox to specify the installation folder.

  • https://support.Mozilla.com/kb/custom+installation+of+Firefox+on+Windows

• How to change the optical drive for Portege R500-135

  Hello

  I need to change my optical drive, but I don't kown where I can buy one.
  My laptop is PPR50E-08M046FR.

  THX

  Rgds

  Hello

  As far as I know it of not easy to replace the STRANGE because it s hidden under the bottom cover, this cover should be removed first to access the CD/DVD drive, HARD drive, etc.
  But I found a useful page:
  [Portege R500 | http://www.irisvista.com/tech/laptops/Toshiba-Portege-R500/disassemble-laptop-remove-hard-drive.htm]

  But note; everything you do it your own risk you Lady laptop parts. Be always careful and don t use force

• W xp on drive: how to change the keyboard driver?

  I installed xp W on the player and it seems to work well, except that the use of the keyboard is now a bit eccentric. How install W xp the procedure suggested to install the German keyboard. It was almost, but unfortunately not quite correct. The driver installed is related to this here keyboard https://en.wikibooks.org/wiki/German/Appendices/Keyboard Note the remark under the figure: "keyboard German and Austrian, but remember that the Switzerland does not use this provision." My computer is acually have it 'weird', namely the Swiss German keyboard as shown here https://commons.wikimedia.org/wiki/File:KB_Swiss.svg I have the chance to finally get a good driver working?

  FYI: Looking at the keyboard drivers installed in my W7prof says:

  i8042prt.sys

  Kbdclass.sys

  VMkbd.sys

  I presume that the last two drivers when added during the installation of the player.

  Just in case someone stumbles across this thread. Before you ask here for help, I tried to solve the problem by adjusting the settings language/region under W xp on the drive. Do not have I managed blaimed VMware who installed a wrong driver. I'm ashamed to admit that the problem was not VMware, but rather me do not have w xp, the language/region settings properly adjusted. Now being how it is supposed to do, the keyboard works fine. I'm sorry.

• How to change the CD drive settings to activate the "Autorun" feature in Windows 7?

  I tried all the fixes online and they do not help.

  Original title: I am running win7 on a computer dell laptop and have tried everthing to get the autorun cd player and it will not.

  Hello
   
  Thank you for the update. We are pleased to know that the problem has been resolved.
   
  In the future if you face problems under Windows, feel free to post your queries. We are happy to help you!
   
  Thank you and best regards.

• How to change the location where the scan of the computer updates the file?

  I would like to know how to change the location where the scan updates the file.

  HI ROT2,.

  It depends what printer and the software you use?

  Normally, you will find a 'save to file Option save' like the screenshot below.

  

• How to change the default path for documents and settings

  How to change the default path for documents and settings

  I try to change in the registry, but the profile can create but error! had no choice to change the default path % lecteur_systeme % d: /.

  Hello

  I suggest you to download TweakUI, this could help you or get you headed in the right direction
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-XP

  Also this KB could help as well:
  http://support.Microsoft.com/kb/236621

  It will be useful.

• How to change the location of the installation folder of Windows of drive c to any other drive in windows 7

  How to change the location of the installation folder of Windows of drive c to any other drive in windows 7

  When you install a program, you normally have the opportunity to take the default or custom installation.  If you choose custom, you can specify where the program will be installed.

  Good luck.

• How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

  How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

  These page numbers were initially created using Acrobat PDF header and footer.

  I have a 750 page pdf document that I've created.

  I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

  But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

  I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

  So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

  A way to remove these page numbers already there and add new page numbers.

  Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

  My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

  If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

  Thank you for your review and response.

  You should be able to update with tools - Pages - header & foot-

  Update... It not work for you?

  If this isn't the case, then try to remove from this menu and then re - adding them.

  Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>