How to change the scene numbering scheme

Similar Questions

• How to change the page numbers after adding & save page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers

  How to change the page numbers after you add and save the page numbers in the pdf document - need to change the existing page printed on the upper right in the header numbers.

  These page numbers were initially created using Acrobat PDF header and footer.

  I have a 750 page pdf document that I've created.

  I have to sometimes the pages up and down after that I added the page numbers in the document by using the Header_Footer tool on the right column of tools.

  But after you save the document, if I get a few pages around, I can't go back and change the page numbers.

  I thought that the page numbers, as indicated in the header and footer must have changed automatically, but I guess that once its print, that it cannot be edited - is that, as what is?

  So I guess we should always first get a copy without numbers of pages before confirming the documents and the creation of an index.

  A way to remove these page numbers already there and add new page numbers.

  Its a lot of work to align 750 court documents and then realize that you must move some and then realize the page numbers cannot be changed and thus begin to do this all over again to compile which can take about 10 hours.

  My question is quite simple, but I hope that overall, I got my point. Sorry if I made it is too complex.

  If no simple way, want to know if anyone has another different tool or a few recommendations to better highlight what I'm doing wrong.

  Thank you for your review and response.

  You should be able to update with tools - Pages - header & foot-

  Update... It not work for you?

  If this isn't the case, then try to remove from this menu and then re - adding them.

  Tuesday, June 23, 2015 23:55, Fortune Mile [email protected]>

• [HTML5 Canvas] How to change the scene?

  Hello

  I have an animation created in a HTML5 Canvas document. When seen in the browser, it is displayed in the size of the document, which is not surprising, but what I want to do is display the full window size, scaling to fit. Basically, I'm looking for the equivalent AS3 scaleMode and align with the SWF in height and width to 100%. The publication settings is not all the options related to the scaling, so I don't know where to look. How should I do this?

  Thank you!

  -Aaron

  Hi all

  Sensitive scaling options are now part of the HTML5 canvas publication settings in the latest version of animate CC (2015.2)

  See here: new feature summary (June and August 2016)

  Creating ads with CC HTML5 animate: canvas reactivates the scale. Animate Adobe blog

  Update your copy of Animate through the creative application of cloud and try it now!

• How to change the default numbers indicated in the drop down tags

  I have more than 10 categories of beacon and wish that, when I go to these last tags or is it possible to add tags in the bookmark drop down?

  Thanks for the help, I couldn't have the new smart bookmark to places of request, but I have figure out I could copy the tags of the historical record and place it on my toolbar, it opens to all of my tags.

  Thanks for the help.

• How to change the color scheme

  How to change the color scheme

  If you mean the appearance of the interface of the program, go in Edition > Preferences > Interface and choose a theme.

• How to change the cup of cups on a recipe by the numbers

  I create a recipe in number and I wish it was a plural version of Cup.  I do not know how to change the existing resize options.  So instead of read 6 cups he would say 6 cups.

  Select Cup in recipe > formats bar opens on the right & the cell will be selected blue.

  Pop-up menu + - below in the list. Click on + and add cups.

  Best

• How to change the color of form fields

  I don't know how to change the color of form fields. They default to gray, but I don't know how to make a different color.

  Gray does not match the color scheme of my landing page!

  Thank you!

  I think you have two options when you are working on a landing page with an embedded format:

  • You can change the background color of the entire form field set by selecting the shape, and then clicking on the Toolbox. In the window that opens go to the second (on a paint brush icon) and select the background color you want.
  • You can change the background color of the actual fields in the form by adding CSS styles. Select the Toolbox, go to the last tab (Tools Extract page) and in the middle of this window, you will see "head | CSS | JS"- select this average CSS tab and enter the style code to get the color you want. Here is an example of code you can put in it. Note that #000000 is the color code for black. Here is more information about the code: css - background in the input fields and text color? - stack overflow

• How to change the application apps and the sysadmin password

  Hi expert,

  I know not how to change the password application and sysadmin in the oracle application. but I have a doubt.

  What is required at the bottom of the application when you go to change applications and the sysadmin password in the oracle application.

  Please suggest me what is the proper way to change the apps and the sysadmin password.

  to change the password for apps I followed the command below.

  FNDCPASS apps/apps 0 System/Manager SYSTEM APPLSYS < new password for applications >

  for sysadmin

  FNDCPASS apps/apps 0 USER sysadmin < new passwd for sysadmin > System/Manager

  Please clear my doubt.

  Thanks and greetings

  pritesh Rodriguez

  
  

  
  

  I know not how to change the password application and sysadmin in the oracle application. but I have a doubt.

  What is required at the bottom of the application when you go to change applications and the sysadmin password in the oracle application.

  You must stop the services before you can change the password of user apps, and then run the automatic configuration after changing the password and eventually train services to the top.

  Stop down services or the AutoConfig running is not required for SYSADMIN (and other users of the application).

  Please suggest me what is the proper way to change the apps and the sysadmin password.

  to change the password for apps I followed the command below.

  FNDCPASS apps/apps 0 SYSTEM APPLSYS System/Manager

  for sysadmin

  FNDCPASS apps/apps 0 system/sysadmin USER Manager

  Please clear my doubt.

  What change Applications using the apps schema password change Utility (FNDCPASS or AFPASSWD) (Doc ID 437260.1)

  Loss of password SYSADMIN. How to know the password of the user SYSADMIN (Doc ID 1066661.1)

  Thank you

  Hussein

  
  

• How 2 change the name of image, including its .xmp file?

  How 2 change the name of image, including its .xmp file?

  I suppose that if I change image file name, the file '.xmp' that accompanies it will no longer an appropriate reference to associate. Also, I guess I can just simply change the name of the image file and give its eponymous .xmp. That means, for example, if I have:

  "This1stPhotoOfJane.dng" and "This1stPhotoOfJane.xmp"

  and change their names manually:

  "JanePhoto1.dng" and "JanePhoto1.xmp"

  It would not work.

  So is the simple way to do it?

  I have a bunch of files that I forgot to name who have already gone through the raw editor and now I would like to give them a real name as opposed to a single series of numbers they currently have.

  You should be able to bridge, since by default, the file of the side car is hidden. I think he knows enough to rename both.

  Copy the image and the file in a temporary folder, rename it and check that it actually did. If I myself remember copy or film a raw file would also move or copy the file, then it would be a good time to check that as well.

• How to change the Rectangles with buttons

  I'm working on this example that does not work correctly:

  public class test extends Application
  {
  
      private void init(Stage primaryStage)
      {
  
          Group root = new Group();
          primaryStage.setScene(new Scene(root));
  
          String pillButtonCss = DX57DC.class.getResource("PillButton.css").toExternalForm();
  
          // create 3 toggle buttons and a toogle group for them
          ToggleButton tb1 = new ToggleButton("Left Button");
          tb1.setId("pill-left");
          ToggleButton tb2 = new ToggleButton("Center Button");
          tb2.setId("pill-center");
          ToggleButton tb3 = new ToggleButton("Right Button");
          tb3.setId("pill-right");
  
          final ToggleGroup group = new ToggleGroup();
          tb1.setToggleGroup(group);
          tb2.setToggleGroup(group);
          tb3.setToggleGroup(group);
          // select the first button to start with
          group.selectToggle(tb1);
  
          //////////////////////////////////////////
  
          final VBox vbox = new VBox();
  
          final Rectangle rect1 = new Rectangle(300, 300);
          rect1.setFill(Color.ALICEBLUE);
          final Rectangle rect2 = new Rectangle(300, 300);
          rect2.setFill(Color.AQUA);
          final Rectangle rect3 = new Rectangle(300, 300);
          rect3.setFill(Color.AZURE);
  
          tb1.setUserData(rect1);
          tb2.setUserData(rect2);
          tb3.setUserData(rect3);
  
          group.selectedToggleProperty().addListener(new ChangeListener<Toggle>()
          {
              @Override
              public void changed(ObservableValue<? extends Toggle> ov, Toggle toggle, Toggle new_toggle)
              {
                  if (new_toggle == null)
                  {
                      //rect.setFill(Color.WHITE);
                  }
                  else
                  {
                      vbox.getChildren().addAll((Node[]) group.getSelectedToggle().getUserData());
                      //rect.setFill((Color) group.getSelectedToggle().getUserData());
                  }
              }
          });
  
  
          ///////////////////////////////////////////
  
  
          HBox hBox = new HBox();
          hBox.getChildren().addAll(tb1, tb2, tb3);
          hBox.setPadding(new Insets(20, 20, 260, 20));
          hBox.getStylesheets().add(pillButtonCss);
  
  
  
          vbox.getChildren().add(hBox);
          //vbox.getChildren().add(rect);
  
          root.getChildren().add(vbox);
      }
  
      @Override
      public void start(Stage primaryStage) throws Exception
      {
          init(primaryStage);
          primaryStage.show();
      }
  
      public static void main(String[] args)
      {
          launch(args);
      }
  }
  
  
  

  I want to create several Rectangles (or in which object or object) in which I want to store data. I want to spend the Rectangles (objects) that appear in front of the user by using the buttons. The example that I put in place does not work correctly. Can you tell me what is the right way to implement this?

  REF javafx 2 - How to change the Rectangles with buttons - stack overflow

  You have two problems:

  User data that assign you to each button switches are a node, not a [Node]. Thus, the cast will fail on line 43.

  When the selected toggle changes, you add another Rectangle to the vbox. You want to replace the rectangle that is in the vbox.

  Try

  vbox.getChildren () .setAll ((Node) group.getSelectedToggle () .getUserData ());

• How to change the background color of selection of the selected item in the drop-down box of choice?

  How to change the background color of selection of the selected item in the drop-down box of choice?

  By default, the selection background color like 'blue', but if I want it to be "yellow" for example, how should I do?

  Thank you

  The id is applied by (I think) the skin of the ChoiceBox class. You don't need to define.

  You must apply the css in an external style sheet. You can apply the external style sheet to any parent of the box of your choice, or on-site (the most usual way to do it).

  Example:

  import java.util.ArrayList;
  import java.util.List;
  
  import javafx.application.Application;
  import javafx.scene.Scene;
  import javafx.scene.control.ChoiceBox;
  import javafx.scene.layout.VBox;
  import javafx.stage.Stage;
  
  public class ChoiceBoxTest extends Application {
  
    @Override
    public void start(Stage primaryStage) throws Exception {
      primaryStage.setTitle("Example 2");
  
      final ChoiceBox choiceBox = new ChoiceBox<>();
  
      List tempResult = new ArrayList();
      for (int i = 0; i < 10; i++) {
        tempResult.add("Item " + i);
      }
      choiceBox.getItems().setAll(tempResult);
  
      VBox root = new VBox();
      root.getChildren().add(choiceBox);
      final Scene scene = new Scene(root, 300, 250);
      scene.getStylesheets().add("choiceBox.css");
      primaryStage.setScene(scene);
      primaryStage.show();
    }
  
    public static void main(String[] args) {
      launch(args);
    }
  
  }
  

  choiceBox.css:

  @CHARSET "UTF-8";
  #choice-box-menu-item:focused  {
   -fx-background-color: yellow ;
  }
  #choice-box-menu-item .label {
   -fx-text-fill: black ;
  }
  

  Post edited by: James_D

• How to close the scene?

  Hi how to close the scene? The doc says that

   stage.close()

  just mask the window but still exist in memory and frees resources. Y at - it something like

   JFrame.dispose()

  My requirement is first I'll show the step that displays a login form. Once the user s in successfully login I have to close it and open another window that contains information specific to the user. So, what might be the best approach?

  Instead of using the many steps I suggest to use only a step and many scenes.
  Here are some examples:
  Re: How to change several scenes?
  https://blogs.Oracle.com/acaicedo/entry/managing_multiple_screens_in_javafx1

• How to change the color of each page number in InDesign CC?

  I'm working on a book that has pages with black background and some with white background... I need to know how to change the color of each page number, so that they will be visible on the black background.

  I tried clicking on the page number, cmd + shift click... nothing seems to work. I have all the page numbers on a separate layer, because they were hidden behind the images that I place on each page... I don't know if it's important.

  Any suggestion would be appreciated.

  My best advice is to make a second set of master pages with white numbers and apply them as needed.

• How to change the color of an element of "xref" existing as a reference?

  How to change the color of an element of "xref" existing as a reference? Now, its color is black, but I want it is blue. Here are the excerpts from the file of ESD. Can anyone help? Thanks in advance. You can also give me your Skype if you have the answer.

  Element (reference): xref

  List of attributes

  Name: See the optional choice

  Choice: new, replace, auto

  Default: automatic

  Name: Ref-text String

  Name: Ref-external-id String

  Name: File-Ref-String

  Name: id-ref - String

  Name: number of the optional choice window

  Choice: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10

  Default: 1

  Name: optional string condition

  Name: condition-model String

  Name: Optional String property

  Name: review optional choice

  Choice: modified, added, deleted, off

  Name: anchor id String

  Name: msg-info String

  Format of original reference

  If the context is: * < (list-steps | block)

  Use the reference format: number

  On the other

  Use the reference format: numbers and text

  Hello

  what you need to do is the following:

  -Open your template (not ESD)

  -define a format of characters (i.e. crosslnk) and change the font color of blue

  -Add the tag in front of both of your cross link formats (number and numbers and text)

  -Save the template and open your documents-> cross links are now blue

  have a nice,

  Alex

• How to change the display of cm in pixels while marking an object?

  How to change the display of cm in pixels while marking an object?

  Hello, you can right click on the rulers to change their units, or if you enter the numbers in a numeric field which has a unit, you can add px for pixel, cm for centimeters, in in....