How to change with lookupcode and sense

Similar Questions

• How to change my password and my incoming and outgoing mail servers

  Hello, I used Outlook Express for years and I know how to set up 'everything' I need in the pages of parameters because their settings pages are all "logical" with everything out in the open.

  However, Thunderbird "cache" their settings behind the buttons and confusing forms.

  There are many tutorials that explain how to set up Thunderbird since the beginning and show how to set up a new e-mail account. But I was not able to find a tutorial on how to change my password "after that" I have been using Thunderbird for a while.

  I'm also no way to change the incoming and outgoing servers. For example, I changed my hosting at another Web host and I need to use the new the new hosting company e-mail servers and I can not anywhere, see any tutorials that cover current activities or day by day with Thunderbird.

  Can you please change your screens of settings for Thunderbird easier for new people to find these normal and necessary?

  Also can you please point me to a tutorial that shows me how to change my password and change my incoming and outgoing servers?

  Thank you very much!

  Edward

  You can change your settings to

  • Thunderbird > tools > accounts settings
  • After clicking the account settings > you get a pop up window
    • Left hand side you can see the list of emails that you configured
    • Same left panel last option is the outgoing server settings

  Thunderbird is the customer between the user and the mail server. She never recorded your personal membership. If you want to change your password, go to your mail server and change it via browser

• I don't know how to change the size and quality of the text on the screen on Windows 7

  I just installed a new Windows 7 but I don't know how to change the size and quality of the text on the screen.  I tried all the things normal, resolution, size of icons, dpi etc but nothing gives me what I want.  The text in clear 'wonderful' thing is just terrible.  When I go through the 4 steps I see no text boxes which make the text nothing better.  All options are terrible, so the result on screen is too terrible.  When I do any huge I do not get a full screen of things - view the Start button disappears or I did not closing small cross at the top - of the suggestions to inprove the situation?  I must mention that my screen/monitor is 2006 - I need to buy a new one?  How much is this Windows 7 is going to cost me, or maybe I should go back to XP!

  I sincerely thank all you smart "technicians" for all the answers you always gave myself and all others who ask questions.  I'm not too smart with all this new technology as I fell into it very late.  I am now in my 60s and only started using a pc when I was over 50 years so...  In any case, I asked a question about the size of screen resolution and text and received much good advice from all that you guys.  I had recently changed in XP to Windows 7.  However, the bit of advice that I was given in 'Cyberking' here at the Portugal had set the resolution of the screen, the advanced settings, 75 to 60 Hertz Monitor tab.  Very basic, and the first question asked the technician (Lady) was "what size is your screen?  Naturally as a smaller screen that any 'techno' would be considered dead aid, solving the problem was simple and straightforward without me having to stretch my knowledge and my skills by downloading all programes weird (to me) or do the funny stuff in the bios or something else.  I send this comment to you for you to realize that the simple solution is not always bad and maybe we should go for the easiest first and then work up to the more difficult ones.

  Just for you all to see - now my screen resolution is perfect, the text on the screen is clear and legible without difficulty, even though the size of text and icon is small.  Clarity is all!

  Thank you all once again!   Best regards, Blondie blue.

• How I change the fonts and colors of default return?

  I changed the font and the color of the text through the Tools button and the button options and the tab content. I can't find anything tell me how to change the fonts and colors to the colors and fonts by default. Can you advise me? I use Windows 7 Home Premium OS. Thank you.

  Hi Brenda19605,

  You can use this article to set the fonts and colors: https://support.mozilla.org/en-US/kb/change-fonts-and-colors-websites-use?esab=a & s = do & r = 0 & s = as

  The default settings for the police are in this article:
  https://support.Mozilla.org/en-us/KB/some%20text%20shows%20up%20bold%20after%20upgrade

  Unfortunately for the default color has no good reference. For the text, but it is black (most lower-left), the background is white (color above left). Unvisited links is blue (column 8, line 5) and the visited link is purple (column 9, line 5).

  Let me know if you need help more!

  Lordfreak

• How to change the typo and misspelled faults in my PDF?

  How to change the typo and misspelled faults in my PDF?

  Hi Gerald,

  You can download a free trial of 30 days from the following link: https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

  Regarding the pdf edition is concerned, you can click on the "Edit pdf" option on the right pane and easily edit the text in the pdf file. For more details, please visit: https://helpx.adobe.com/acrobat/using/edit-text-pdfs.html

  Kind regards
  Rahul Tyagi

• How to change the size and color of 'staticText '?

  Can anyone share please how to change the size and color of the object "staticText"?

  function buildUI (thisObj) {}

  var myPanel = (thisObj instanceof Panel)? thisObj: new window ('pallet', 'Gear of Stress', undefined, {resizable: true});

  var txt is myPanel.add ("staticText", [0,0,100,20], "txt");.

  txt. newFont, fontSize, color?

  Return myPanel;

  }

  var myToolsPanel = buildUI (this);

  I did a quick test on a PC at the office and it seems that Gill without isn't a stock PC police. You could comment on these out or change them to a police stock as Helvetica or something. Once I removed that it has launched on PC very well.

• How to change the SGA and PGA in 10g r2 RAC

  Hello
  
  How to change the SGA and PGA in 10g r2 RAC, its Linux.

  Hello

  Here's the way I followed to change the SGA and PGA in CARS.
  --------------------------------------------------------------------------------
  Action plan to change the parameter memory in the environment(5/21/2010) of production

  Note:
  =====
  Practice must be done in the DEV/TST environment before going to Production.
  Although the procedure can be applied in the testing environment the evolution of values
  used in the test environment should be amended since number of RAM are not the
  even between the production and test servers.

  1 changes to these two parameters in one of
  the prod instance, e.g. PROD1
  ====================================================
  Connect as sysdba on sqlplus
  --------------------------

  Change:

  ALTER system set sga_target = 28G scope = spfile sid ='* ';

  Change:

  ALTER system set pga_aggregate_target = 4G scope = spfile sid ='* ';

  SQL > alter system set pga_aggregate_target = 4G scope = both;
  SQL > show parameter pga_aggregate_target;
  -should see the number altered on both instances

  Change:

  SQL > alter system set sga_max_size = 28G scope = spfile sid ='* ';

  SQL > alter system set sga_max_size = 28G scope = spfile;

  SQL > alter system set sga_target = 28G scope = spfile;

  3 stop PROD database (two instances must stop)

  $> srvctl stop database d PROD
  $>. / $ ORA_CRS_HOME/bin/crs_stat - to check the status of the database

  4. establish the PROD database (two Forum should be high)

  $> srvctl START database-d PROD
  $>. / $ ORA_CRS_HOME/bin/crs_stat - to check the status of the database

  connection in both cases as sysdba to check
  --------------------------------------------

  SQL > show parameter pga_aggregate_target
            
  SQL > show parameter sga_max_size
  -should see the number of change always there in both cases
  -According to step 1

  -After confirmation above two parameters are changed on both instances.
  -then make the syntax below in a case

  (5) check that everything is ok

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• 1217nfw MFP how to change network name and password when you buy a new routers

  I have a 1217nfw MFP.  It was working fine without thread.  Then my router has stopped working properly.  I bought a new router and easily set up my computer, the iPad and the iPhone to work with her.  But I don't know how to change the printer set up so that he will see and connect to the new router (i.e., change the network name and the password that the printer uses to connect).  Someone knows how to do this without having to uninstall and reinstall the printer as if it was fresh out of the box?  Thanks for your help.

  Thanks a lot for your help.  The choice to click on my laptop were not quite the same as stated in the article, but the article got to the right spot and I was able to figure out the rest.  So now my laptop is wireless printing.  MacBook Air my wife still does not work, but I'll play with it after the holiday weekend.  Do you know of an article that allows to change the name of the router and the password when it is a Mac?  Whatever it is, thank you very much for your quick response and help.

• How to change phone number and service provider blackBerry smartphones

  Assuming you kept the same Blackberry device and changed your provider number and service.

  How you can update this information on Blackberry ID.

  I could click on "display info for ' in (https://appworld.blackberry.com) and simply changing the subscription data.

  With respect to how and when it was changed to Verizon and why it was not clickable previously. Which should show on Blackberry backend (s) and/or their service providers in different geographical locations.

• How to change the time and date on the desktop?

  My computer does not show the time and date.

  I tried several times to update the date and time, but after the judgment the same problem persists.
  How to solve the problem?

  Mr. Thanapackiam I know that this issue please follow my steps

  Step 1:-go to the Start Menu and Type "region and language" and press enter
  Step 2:-go to the location tab and select your current location
  Step 3:-go to the Start Menu and Type "Services" and press ENTER. (i.e. open Services)
  Make sure that the Windows time service is running.
  Step 4:-click Date and time on the far right of the taskbar.                           Click Change Date and time settings.
  Step 5:-click Change Date and time settings button to change the date and time
  Step 6:-Click Internet Time to synchronize the time with the Server online
  Step 7:-   click on change settings , then update now
  
  
  Thank you

• How to change the pointer and the sensitivity of the mouse

  original title: pointer and mouse sensitivity

  I have a new laptop and when drag my pointer over a link it it automatically opens wether I want what it or not.  I can't find how to change it.  I have a toshiba satellite L555-S7001.  Any help would be greatly appreciated.  Thank you Paul

  I have a new laptop and when drag my pointer over a link it it automatically opens wether I want what it or not.  I can't find how to change it.  I have a toshiba satellite L555-S7001.  Any help would be greatly appreciated.  Thank you Paul

  Hello

  Check the options for the Touchpad in Control Panel. It may be named "Synaptics" according to the manufacturer. If you can't find the settings, see the manual that came with the computer.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• How to change data objects and update the corresponding task and task forms?

  Hi all
  
  I modified this thread because I found that I had many questions to ask.
  
  1.
  I'm quite new to OBPM and would like to know how to change data - for clarity objects add a new attribute "Dependents of the Client" "Customer care" - and therefore update the task that uses the 'customer information' what makes via data binding - I get an error message here - or via the data about the data Task-The chosen tab it does not appear to be linked to my approach in some sort.
  
  2.
  Will be the task form that I generated earlier in < 1 > update automatically? Is it possible to update manually if the task has been clearly customized?
  
  3.
  What are the objects of project data? They do not store values in my process. They are for the arguments only - like reusable process?
  
  Thanks in advance,
  
  Kind regards
  
  Yanis

  Hi Yanius,

  (1) assume that you start from scratch. First, you declare your data object structure. To do this, you must go to the BPM project Naviagtor, right-click on 'Catalogue of trades' and create a new Module. Then you can right click on the module you created and select the new object of trade. Add all the attributes you need. It is the same to declare a class in Java. Second, you must declare a variable of the type process you have created: select the process, go to the Structure display (if you don't go and activate it in menu view Jdev-> Structure). Right click on the Process data object and create your variable. It's like setting a variable in Java. In short, answering your question, make the path opposite: find in your process of type "Customer Details", then go to your catalog Business, right click and change the definition to add what you need.

  (2) the human task will not update automatically (annoying). If you change the object itself, so you don't need to change your mappings because actually there the same object you are through the task as in / out argument. There are two things here: the human task and form associated with it (where probably change you the subject i.e. customer details). Go to the form (.jspx) - click on the tab links (by default, you are in the Design). In the links page, there is a link on top: "Page Définition File" (something like proj/pageDef/...xml). Open the XML file and go to the source. There you can add manually now all the attributes you need and that were not available before (i.e. dependent Client). It's a little complicated, but at least you don't have to recreate it. particularly useful if you have already implemented and subsequently form, you need to add more things (business is very good to say otherwise, "I would like to see something else in the form" ;)

  (3) project data objects are visible by all processes that you have in the project rather than the object of process data that are visible only to the method where you set the variable to. This means that you declare an object of data of the project once and then it will be available to all processes. Keep in mind that each process has a copy of it. In other words, it is not like a global variable that everyone sees. If edit you in a single process, other processes will not see the new value.

  I hope that I have answered your questions.
  See you soon,.
  Felipe

• How to change the vibrance and clarity during editing

  Hello

  I wonder how do I change the clarity and vibrance imporing RAW PE file.

  Concerning

  Lightroom is essentially just the dialog box Camera Raw with additional features. So, when you change in the develop module, you are always within Camera Raw. Adjustments Vibrance and clarity are the Raw settings and can not be performed outside the Camera Raw dialog box.

• How to change the subject and message body of a message alert foglight?

  Hello

  I would like to change the subject and the message body of the foglight e-mail alert that is triggered from the different alarms. We run Foglight 5.6.4. Can you please direct me to a documentation or suggest the way?

  Kind regards

  Murali

  I got this job with the help of Tim. Thank you very much Tim.