check a result using lines that are different to the result

Similar Questions

• How to find lines that are inserted in the last minutes n?

  Hi all
  I have a log table where, whenever a warning is issued, a new row is added. The table contains a field with the sysdate when the warning was issued.
  I would need to collect all the warnings in the last 30 minutes (supposed) and send a mail to the administrator. Looking at some FAQ I have explained this:
  
  Select * from PROCEDURE_LOGS p where ((p.DATE_LOG-sysdate) *-1440) < 30
  
  However, it does not do anything.
  Can someone help me correct this statement?
  Thank you very much
  Frank

  Assuming that the field is a DATE field and time information are included in this field to date. Then your application should work.

  I would write it differently, but the logic is the same.

  select *
  from procedure_logs p
  where (sysdate - p.date_log) * 24 * 60 <= 30
  ;
  

  Perhaps the information is not yet committed, so that you don't see it in your additional session?

  Look at your data and consider wheather this record must be included or not.

• In Windows 7 we select several lines of data that are in a different location on the page (no continuous lines) through the mouse or keyboard and also can we copy all lines of these different at the same time to paste somewhere else in one fell swoop.

  > Now I'm unlable to select more number of lines that are not a sequence in a single page to copy the data rows and paste somewhere in one fell swoop.
  > Is this concept implemented in Windows 7. ?
  > Is there a provision (method) to select several lines that are not continuous across the keyboard or the mouse in windows 7?

  Byagaris,
  It depends on what program you are trying to copy and paste into.  You are able to select continuous, multiple lines, by using the Ctrl Key and clicking, or by highlighting the desired line.  For example, I held the Ctrl key and then, using the mouse, has highlighted several different phrases in the various paragraphs, and could then copy them.  This feature is available for several versions of windows.
  If you are not able to perform this action then post what happens when you try and what program you try it.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Updated Windows - you can do a typical upgrade using an installation disc that's different from the language...

  Hello, I'm Michael.

  I'm a guy who lives in Hong Kong, I bought a laptop that comes with Chinese traditional x 64 Windows 7 Home Preium. I want to use this laptop as a computer professional. Because I don't want to use Chinese as my default language in my computer, so I'm going to upgrade my computer I have subscribed the TechNet, so I downloaded an iso file from the Microsoft TechNet Web site. I downloaded an English x 64 to windows 7 Ultimate. I hope it would work, but an error message is skipped during the upgrade. It is said: you can do an upgrade using an installation disc that's different from the language installed on your computer. Go online to see how to install Windows 7 and keep your files and settings.
  I tried to press the hyperlink (go online) and it does not at all. I have to ask this question to the Microsoft Answers and see if if anyone can give come me advice because I do not want to click on the custom button because there are some files saved in my computer. So I need answers as soon as possible because I could die without a PC! Thanks for all those who read this and you time.

  No direct path to the evolution of the Chinese language to English. But you can upgrade your version of Home Premium to Windows 7 Ultimate (upgrade Express). Ultimate has support for English and a number of other languages.

  Amazon: http://www.amazon.com/Microsoft-Windows-Anytime-Upgrade-Ultimate/dp/B002JZ1QWA/ref=sr_1_3?s=software&ie=UTF8&qid=1362231885&sr=1-3&keywords=Microsoft+Windows+7+Anytime+Upgrade

  =================================================

  If you have a retail version of Windows 7, then use the "Anytime Upgrade":
  When you use the "Anytime Upgrade" option, all what you need to do is enter the product Windows 7 upgrade key has been purchased. Do this by clicking on: start/search and enter: upgrade Express

  Upward to a more powerful edition
  http://www.Microsoft.com/Windows/Windows-7/get/anytime-upgrade/Home-Premium.aspx

  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

  A 'step by step' to go through an upgrade to a lower edition of Windows 7 to a higher edition of Windows 7:
  http://windowsteamblog.com/blogs/Windows7/pages/the-Windows-Anytime-Upgrade-experience-for-Windows-7.aspx

  Paths to upgrade Windows 7 (supported upgrade scenarios)
  http://TechNet.Microsoft.com/en-us/library/dd772579%28WS.10%29.aspx

  Windows Anytime Upgrade is supported only in the following countries:
  Australia, Belgium, Canada, France, Germany, Italy, Japan, Netherlands,
  Spain, Sweden, Switzerland, United Kingdom and United States

  Windows 7 Starter to Professional upgrade Express
  http://www.Microsoft.com/Windows/buy/Windows-7-upgrade-Starter-to-professional.aspx

  Most likely the best option and the most popular will be the Home Premium upgrade to Windows 7 Professional, which includes Windows XP Mode. The extra $50.00 for Windows 7 Ultimate will only give you two additional features, bitlocker (for security) and the ability to switch between any of 35 languages.

  Windows 7 - Anytime Upgrade - frequently asked Questions:
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions

  Windows 7 - upgrade Express features:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

  Windows 7 - version comparisons:
  http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

  MS Windows 7 store price:
  http://www.microsoftstore.com/Store?defaultKeyword=Search&siteid=msstore&action=list&CategoryID=38336300&Keywords=Anytime+Upgrade&result=

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  The Express Upgrade "may" not always work for users who have system integrators and or OEM product keys, this applies also to VL (Volume License), MSDNAA or key teaching will not work with the Express upgrade. KMS users consult your administrator before attempting to perform an Express upgrade.

  J W Stuart: http://www.pagestart.com

• get rid of lines that are completely understood by the other lines

  using oracle 10 g
  
  I have a requirement where I have a few groups that have a start date and end date, and
  I don't know how many lines per group, it is dynamic.
  
  I need to get rid of all the lines that are completely understood by the other lines per group
  To tell if an online group has started on January 1, 2000 and ending on January 1, 2001
  and another group line begins February 1, 2000 and ends at 2000 1 dec
  only the line Jan to Jan should appear.
  
  so, for

  with t as
  (
      select 'A' grp, 1 id, to_date('01-01-2000', 'MM-DD-YYYY') start_dt, to_date('01-01-2001', 'MM-DD-YYYY') end_dt from dual union all
      select 'A' grp, 2 id, to_date('02-01-2000', 'MM-DD-YYYY') start_dt, to_date('12-01-2000', 'MM-DD-YYYY') end_dt from dual union all
      select 'A' grp, 3 id, to_date('03-01-2000', 'MM-DD-YYYY') start_dt, to_date('12-10-2000', 'MM-DD-YYYY') end_dt from dual union all
      select 'A' grp, 4 id, to_date('07-01-2000', 'MM-DD-YYYY') start_dt, to_date('01-10-2001', 'MM-DD-YYYY') end_dt from dual union all
      select 'A' grp, 5 id, to_date('01-01-2000', 'MM-DD-YYYY') start_dt, to_date('01-01-2001', 'MM-DD-YYYY') end_dt from dual 
   )

  I don't want to see

  GRP,ID,START_DT,END_DT
  A,1,1/1/2000,1/1/2001
  A,4,7/1/2000,1/10/2001

  Published by: pollywog on July 20, 2010 11:49
  
  Published by: pollywog on July 20, 2010 11:56
  
  Published by: pollywog on July 20, 2010 11:56

  Well, I do not get the exact release you do, but I'm sure that this complies with your verbal condition.

  You may have a fault in your output specified? It is also quite possible, that there is something wrong with my query :)

  with
     t as
  (
     select 'A' grp, 1 id, to_date('01-01-2000', 'MM-DD-YYYY') start_dt, to_date('01-01-2001', 'MM-DD-YYYY') end_dt from dual union all
     select 'A' grp, 2 id, to_date('02-01-2000', 'MM-DD-YYYY') start_dt, to_date('12-01-2000', 'MM-DD-YYYY') end_dt from dual union all
     select 'A' grp, 3 id, to_date('03-01-2000', 'MM-DD-YYYY') start_dt, to_date('12-10-2000', 'MM-DD-YYYY') end_dt from dual union all
     select 'A' grp, 4 id, to_date('07-01-2000', 'MM-DD-YYYY') start_dt, to_date('01-10-2001', 'MM-DD-YYYY') end_dt from dual union all
     select 'A' grp, 5 id, to_date('01-01-2000', 'MM-DD-YYYY') start_dt, to_date('01-01-2001', 'MM-DD-YYYY') end_dt from dual union all
     select 'A' grp, 6 id ,to_date('12-25-1999', 'MM-DD-YYYY') start_dt, to_date('01-05-2001', 'MM-DD-YYYY') end_dt from dual union all
     select 'A' grp, 7 id, to_date('02-01-2001', 'MM-DD-YYYY') start_dt, to_date('02-01-2001', 'MM-DD-YYYY') end_dt from dual
  )
  select
     grp,
     id,
     start_dt,
     end_dt,
     last_start_dt,
     last_end_dt
  from
  (
     select
        lag(start_dt)   over (partition by grp order by start_dt asc)  as last_start_dt,
        lag(end_dt)     over (partition by grp order by start_dt asc)  as last_end_dt,
        grp,
        id,
        start_dt,
        end_dt
     from
        t
  )
  where last_start_dt is null
  or
  not
  (
           start_dt  between last_start_dt and last_end_dt
     and   end_dt    between last_start_dt and last_end_dt
  )
  order by start_dt asc;
  
  G                 ID START_DT             END_DT               LAST_START_DT        LAST_END_DT
  - ------------------ -------------------- -------------------- -------------------- --------------------
  A                  6 25-DEC-1999 12 00:00 05-JAN-2001 12 00:00
  A                  3 01-MAR-2000 12 00:00 10-DEC-2000 12 00:00 01-FEB-2000 12 00:00 01-DEC-2000 12 00:00
  A                  4 01-JUL-2000 12 00:00 10-JAN-2001 12 00:00 01-MAR-2000 12 00:00 10-DEC-2000 12 00:00
  A                  7 01-FEB-2001 12 00:00 01-FEB-2001 12 00:00 01-JUL-2000 12 00:00 10-JAN-2001 12 00:00
  
  4 rows selected.
  

• Accumulated L7600 ink usage information are different on the "Inks" tab and the tab 'use '.

  I have a HP Officejet Pro L7680 all-in-one
  {Removed privacy}.  When I type the IP address in my browser, a very informative Web page is displayed.  However, information on the use of accumulated ink are different on the "Inks" tab and the "Use" of the Web page tab.  The "Inks" tab specifies the following black: 197,54 ml, yellow: 68,89 ml, Magenta: 160,93 ml and Cyan: 156,46 ml.  The 'Use' tab specifies the black following: 197,57 ml, yellow: 68,91 ml, Magenta: 42,53 ml and Cyan: 32,41 ml.  Why is the different information?  What information is correct?

  Fix.

• Hide lines that are zero in report

  Hi all
  
  I have a requirement where the report should display only the rows in the column if it has a value and should not display the lines if it has a value zero. I have tried with the Sql, but could not find any results. I don't know if there is a way through which I can hide the lines that has null in the model.
  
  Please let me know about it.
  
  Thanks in advance!

  say IND is the column you control to null and you do not want the lines where IND IS null

  You can have the code as below

  G_1 is the loop and IND is the control column

• -L' stop six options that are next to the lock button in the task in the task bar disappear from my computer.

  -The six closure options that are next to the lock button in the taskbar disappear from the my computer. When I click on the arrow next to the lock button, my only computer log screen and lock up instead of six normally closed options i.e (change user, locking, lock, re - start, suspend and logoff.)
  -The first step, I took is to check for assistance and support in my system, and I could not find a guide on how to restore six back closure options.
  -There is not any notification of any errors.
  -My product/name of Microsoft's Windows vista Home Basic edition. Model: Compaq presario CQ60 Notebook PC
  All I want is no details to restore my missing shutdown options. Or if you can restore it for me online.

  Hello

  • What were the changes made before the problem occurred?

  You can view these methods:

  Method 1:

  I suggest you to start your computer in safe mode with network and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try the SFC scan on the computer in mode noraml.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:

  Run a full scan with your antivirus software and removal of malware/spyware.

  http://www.Microsoft.com/security/PC-security/MSE.aspx

  Malware:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-to-get-rid-of-malware/ba80504b-61f1-4D71-960f-b561798b7b42

  Method 4:

  You could also try to perform a system restore.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• Does anyone know how to integrate a widget that displays quotes from stock market of listed companies that are mentioned in the web page?

  I'm developing a financial information site. I am interested in incorporating the latest prices of the companies that are listed on the stock exchange that also appear in an article... For example, if Tesco, Morrison and AstraZeneca are mentioned in a news article I write and publish, I would like a code/widget that displays the stock of these companies somewhere in the Web page.

  Thank you very much.

  If you use your search engine preferred to search 'widget scholarship', you will come to the top with a large number of results. If you develop a financial information site, however, you need to be very careful which widget you choose. I just looked at the terms of a free widget that comes up in the search results. It says "x.com may include links to third-party websites. Some of these sites may contain materials that are inaccurate, unlawful or objectionable. You agree that x.com will not be responsible for commercial activities or other activities that occur on a Web site, you access through links on x.com. "Choose the incorrect data source could destroy the reputation of your site. It would be preferable to opt for a paid service. However, even paid for the services do not necessarily provide a stock in real time.

  There is no Dreamweaver widget for the stock. Simply to assess third-party provider options yourself.

• I would like to have at least 1 of my toolbars that are displayed at the bottom of my browser open screen. How can I move a toolbar from the top to the bottom of the page?

  I would like to have at least one of my toolbars that are displayed at the BOTTOM of my browser open screen. How can I move a toolbar from the top to the bottom of the page? I don't want to do this by using an extension, and when I read about the extension, I really have not seen how it would move the toolbar to the top-down any browser page open.
  Thanks in advance for the supply, the answer and the procedure to get this accomplished.

  You can't drag an entire toolbar to the bottom of the window. The Bar of the Addon is a "toolbar", drag whatever you want from the Palette to customize or a toolbar up to the bar of the Addon.

• Will I lose my music downloads that are located in the "MY DOWNLOADS" folder "IF" I remove them, once they are transferred to my iTunes account?

  Will I lose my music downloads that are located in the "MY DOWNLOADS" folder "IF" I remove them, once they are transferred to my iTunes account?

  Hello JMarione,

  Thank you for your message.  Because it's really a question of iTunes I refer you to http://www.apple.com/au/support/itunes/.  Support you should get it will ensure that all your media will be transferred correctly.  This is a forum for Vista, and many people have different one from the other configurations.  A good answer for a single person on this forum could still lose you some of your files, because the installation program may be different.  Good luck.

  See you soon

• Public Static T3600 noise coming from headphones that are connected to the headset before decision-making.

  I have problem with my T3600 when used before headphone jack. Noise coming from headphones that are connected to the telephone jack of heat before, however, I tried to connect with rear headphone jack is good. If I put the system in standby mode, when I restart the audio does not work, but the noise electric only in my helmet!

  Hoping to see an improvement soon.

  Hello

  I did the steps you recommended, but my computer is still such a situation.
  I'm using BIOS version A14, audio Realtek ALC269 and Driver for High Definition Audio Driver Version 6.0.1.5890, A06.
  Drivers for Service NOTE from the ADMINtag: maintain the label removed by privacy policy >
  Please help me. Thank you

• View the programs that are running on the remote computer.

  How use remote desktop to view the programs that are running on the remote computer. I connect to the pc remotely is used to monitor a communication system for the alarms. The alarm Viewer application runs as a service. When I connect locally to the computer, I can see the application and view the status of the alarm system. When I connect via remote desktop, I can't. I don't see that the application is running in the services list.

  Do you mean the Task Manager?

  If so, try using change sequence to bring up the Task Manager while in the session remote desktop active...

  http://Windows.Microsoft.com/en-us/Windows7/keyboard-shortcuts

  You might also find something in the PsTools collection...

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896649

• How to find computers that are not on the domain in an Active Directory forest.

  Hello

  I'm looking for a tool that can scan a subnet and give me the list of computers that are not on the field, but connected to the network. My company has recently spent a lot of users of the task force to the area, but there is a population of users who are unwilling to join the domain and still using the local administrator to log on to the computer.

  These computers do not meet the domain policies applied and causing many problems with the network and other systems on the field.

  Help, please.

  concerning

  Syed M. Uzair

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• The list of all names of virtual machines that are attached to the computer with script group

  I need a script that would list all the virtual machines names that are attached to the Machine group as the bellows screenshot:

  

  
  

  Ce can be in any language I just need to get this information.

  I tried to Watch in database and found vm names of in table [ecm_dat_machines] and Group of/ids in names of table [ecm_sysdat_machine_groups] but I don't find table that would be assign vm to the Group.

  I serait appreciate any help or clue as I already spent a lot of time on this task.

  Attached file of import/export includes a view created for the SQL below, as well as a SQL report that uses this perspective to the computers by group in the VCM UI.

  Note that the functions used in the join of the query criteria are there to ensure that only valid/active/license machines are displayed, these date data and time are adjusted to the time zone of the user, and that the users do not see that their role does not have access to groups of computers.

  SELECT

  m.machine_name,

  mg.machine_group_name,

  mg.machine_group_desc,

  DATEADD (mi, utc.utc_offset, m.date_last_contact) as date_last_contact

  OF dbo.ecm_dat_machine_group_machines_xref mgx

  JOIN dbo.ecm_dat_machines m

  ON mgx.machine_id = m.machine_id

  Join dbo.ecm_dat_machine_groups mg

  ON mgx.machine_group_id = mg.machine_group_id

  JOIN dbo.ecm_dat_roles_machine_group_xref rmx

  ON mgx.machine_group_id = rmx.machine_group_id

  AND rmx.role_id = dbo.role_current)

  JOIN dbo.ecm_fn_machines_valid_t (vm)

  ON mgx.machine_id = vm.machine_id

  JOIN dbo.ecm_user_utc_offset (utc)

  1 = 1