How to check a bad use of vSphere or vCenter license details

Similar Questions

• How to check who is using my wireless network?

  I just want to be sure that no one is using my wireless network... I know I did a password to get access to it, but is their way to check if its working?

  In addition, when I went under network settings

  I found something that is called gateway residential... don't remember really see it, but when I go in there, it shows something called teredo... and it has an IP different than my router... no idea what it could be?

  Disabling Wireless SSID Broadcast will arrange this?  making it not visible by anyone but me?

  If you are using WPA or WPA2 and a strong password, nobody is your wireless network, except you.  Anyone who has the skills, computer power supply, time and determination to break into such a system is busy breaking in banks, not your home router.   Then don't worry about this.

  You can check that your router is using WPA or WPA2 and your password by:

  (1) connecting your router 192.168.1.1 and ranging in the wireless section and check that the WPA or WPA2 encryption is turned on and that your password is entered.

  (2) you can check that the router is working by connecting wireless using the password.

  (3) you can check that you have connected to your router first getting a wireless Internet connect, then unplug your router and check that the Internet suddenly not working.

  "teredo tunneling" is a way to move to IPv6 info from an IPv4 router.  Don't worry about this.

  Do not "SSID Broadcast" set to 'off '.  With modern methods of piracy, that old thing of security is now worthless.  Furthermore many wireless adapters have problems connecting to routers that broadcast their SSID not, so it might cause you problems of network.   If you are using WPA or WPA2 and a strong password, who cares if someone sees your SSID?   Without your password, they cannot connect wirelessly to your router.

  I mean, strong password, at least 24 characters random, including uppercase, lowercase and numbers.  Although I recommend 24, or 12 is almost impossible to crack.

• How to check that I use the latest version of firefox?

  I received a message that I don't have the latest version of firefox installed but when I hit the button install a threat warning screen appeared. I chose to get out of there and did not receive the screen setup again.

  If you get a pop-up message asking to update Firefox or plugins then this message is probably a scam and you should never respond to such reporting to avoid being infected by malware.

  • Don't update Firefox via "> about" or by downloading and installing Firefox from Mozilla and server never using a popup or a link on a web page.
  • Plugins should be updated only through the plugin itself, or by visiting the home page of the plugin.

• How to check the HBA firmware in vSphere?

  What is the CLI command to check the HBA firmware? I can only find orders for 3.5. Thanks in advance!

  Check the/proc/scsi/qla or lpfc

• vSphere and vCenter license price is based on the YEAR?

  Hello

  Even if I already know as the product of vSphere and so forth and I am familiar with other virtualization technologies (I will avoid to mention here), I would like to ask about the license costs.

  Currently, we use various stand-alone vSphere servers (sometimes evaluation license and a free license for 5.5), but I would like to have vMotion Metro and subnet rather than in private solutions like 'Veeam' quick migration, etc.

  I went to see the costs... which are generally extremely high, but then I realize that the cost is basic 1 year or 3 years, which means that all VMWare license costs are billed ANNUALLY?

  I mean, if I have 3 hosts ESXi and a cVenter with cost € 4000 will be € 4000 per year? I think it's crazy.

  Can anyone confirm?

  Concerning

  Hey,.

  When you buy the license first, you pay X amount, which includes the license to base 1 or 3 years Support and subscription (SnS).

  After this time, you pouvez renew your SnS for amount Y. For vSphere, one year basic Support is about 10% of the initial report and if I remember correctly.

  But you don't have to renew the SnS, your software will continue to work.

  SnS assets allows you to call VMware and leader in applications for support and very important: you can upgrade your license to the new major version keys when it comes out.

  If for example you can improve your keys of vSphere vSphere 5 6 keys subsequently.

  Tim

• How to check if a key has been used

  Hi all

  Is there a way to determine whether a key has been used in a SQL statement?

  Example of
  I received a call from a developer said that their request was going very slow

  I checked what oracle was doing

  He was using an index with 5 distinct values on a table with a number of lines of 9.2 million

  Selectivity is very bad.

  Then I discovered after talking to the Director it was a hint to use the (silly) hints

  Once we had the suspicion that he did a scan of Table full and actually ran much faster.

  However, when I was watching the SQL text in v$ sql and v$ sqlarea he had no way of knowing if we used a hint

  IE, I saw: / * + RULE * / in the code.

  Does anyone know how to check (from the DB), if an indication is used in a sql statement?

  And if the indication is used, what is the indicator.

  Thank you

  G.

  You can use the following to see the execution plan with the outline and see advice

  Select * from table (dbms_xplan.display_cursor (null, null, 'schema'));

  select  /*+   rule  */  sum(id) from     t1 where     flag = 0
  
  Plan hash value: 2170464548
  
  ------------------------------------------------
  | Id  | Operation                    | Name    |
  ------------------------------------------------
  |   0 | SELECT STATEMENT             |         |
  |   1 |  SORT AGGREGATE              |         |
  |   2 |   TABLE ACCESS BY INDEX ROWID| T1      |
  |*  3 |    INDEX RANGE SCAN          | T1_FLAG |
  ------------------------------------------------
  
  Outline Data
  -------------
  
    /*+
        BEGIN_OUTLINE_DATA
        IGNORE_OPTIM_EMBEDDED_HINTS
        OPTIMIZER_FEATURES_ENABLE('10.2.0.1')
        RBO_OUTLINE
        OUTLINE_LEAF(@"SEL$1")
        INDEX(@"SEL$1" "T1"@"SEL$1" ("T1"."FLAG"))
        END_OUTLINE_DATA
    */
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     3 - access("FLAG"=0)
  
  Note
  -----
     - rule based optimizer used (consider using cbo)
  

  HTH

  Kind regards

  Jagdeep Seven

• How to check only my laptop computer use integrated or the AMD graphics card?

  How to check only my laptop computer use integrated or the AMD graphics card? Some games show me that they use the built-in map: http://img849.imageshack.us/img849/4125/98ab1c28dc9f4b51b537435.png ?

  I have no other option. I have disable Intel card in Device Manager, and it shows me that the AMD driver is not installed correctly. Thank you.

• How to check the use of the ram?

  I have 3 GB of ram on my pc, and I want to know how to check the use of the ram in xp pro? is the use of FP in taskmanager? or (k) of the kernel memory?

  I have 3 GB of ram on my pc, and I want to know how to check the use of the ram in xp pro? is the use of FP in taskmanager? or (k) of the kernel memory?

  Yes, Yes... and no. All applications on your computer uses RAM, not only the pagefile or system (kernel).

  What are you really trying to do?

  See http://www.petri.co.il/pagefile_optimization.htm , especially the part under "How Pagefile your system use?"

• How knowledge/check if the RMAN backup was performed using a current control file or database catalog?

  Hello

  How knowledge/check if the RMAN backup was performed using a current control file or database catalog? I mean RMAN prompt or sqlplus is it possible to know.

  Thank you

  You're welcome my friend

  You can see them using two methods.

  as I mentioned above, you can see them connect to the catalog database and you can query using the view that I sent

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV89601

  the other method is the list command, you must use the list command after connecting using rman "rman target / catalog cat_user/cat_pass@catdbtns" command

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV8136

  Check the value of the control_file_record_keep_time parameter. The default value is 7 days. in the output of the list command, if you can see the old backups to the value, you must be sure that the backup information comes from the catalogue database

  SELECT * FROM parameter $ v where name = 'control_file_record_keep_time '.

  an example of command list

  the list of completed database before backup ' sysdate-10'.

  Concerning

• I went back to school, how to check and change my plan from 49.99 plan creative cloud to version student? I only use After effects and body.

  I went back to school, how to check and change my plan from 49.99 plan creative cloud to version student? I only use After effects and body.

  Both - worse, answered my own question! Thank you!

• How to check the details of connection and disconnection of the team? I want to see the rate of use of the software.

  How to check the details of connection and disconnection of the team? I want to see the rate of use of the software.

  Hello

  I'm sorry but there is no option for monitoring the connection and disconnection of a user.

  You can see their activation of license through your admin console.

  Kind regards

  Sheena

• How to check the Session Variables using the analytical web dashboard

  This is my first post. Easy points to the first right answer... If I can figure out how to give points.
  
  Problem: I need to know how to check that the Session Variables with the Administration of Oracle BI tool are used by the web analytics tool.
  
  Environment: Windows running Oracle 10g BI. Connect to the database using web analytics http:// < server >: 9704/analytics, web analytics is running in a windows Explorer browser.
  
  Current situation: the analytical tool is connected to the database and I can use the screen of "Answers" to the table edge to probe the tables look and things as expected.
  In the administration Oracle BI tool I can see the session of web analytics and I see that he thinks that the Session Variables are set correctly.
  I have reasons to doubt that the analytical tool is to get the right variables and I need to check it out.
  I know that I should use the 'Answer' window to create a shape any of a query that includes NQ_SESSION. < my variable >, but I can't understand what the format should be doing the work.
  
  That's all I need.

  What I do is insert a text in my dashboard object and then set the properties of the text object to display the variable.

  for example to display the DISPLAYNAME variable, the text object properties are:

  User: @{biServer.variables ['NQ_SESSION.]} {[DISPLAYNAME']}

• How to check if the directory is created using create or replace directory

  Hello
  
  I create a directory like below:
  
  Create or replace directory TEST_DIR AS 'C:\ABCD '.
  
  How to check if the directory is created or not? Is there any request for it?
  
  Thanks in advance.
  
  PK

  SELECT * FROM ALL_DIRECTORIES WHERE DIRECTORY_NAME LIKE '% TEST_DIR %. "

  Published by: user3522507 on 2010.06.16. 07:19

• Extreme pro sandisk ssd on SCSI: how to check the status?

  Hello

  I have a SSD Pro Extreme Sandisk 240 GB on my system.

  I've seen it can be detected and status verified by the dashboard of sandisk.

  A big company like Sandisk, which looks very bad for me, because it's a very long time (YEARS) the dashboard does not support scsi controller detection and management.

  So, please let me know how to check and manage my SSD Sansidk in absence of decision-making in charge of your dashboard.

  I don't want to find problems after the harshness.

  Thank you

  ALberto

  Hi albedo.

  Unfortunately, these drives are designed for the SATA interface and some orders may not go through interaction SCSI-SATA, dashboard controls may be among them.

  In this case, you can check your statues in car with software or third-party tools and share the result with us if you have any concerns. Dashboard is an add-on software that comes with the player, but not mandatory to use, and it won't affect your use if you do not dash

• Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.

  I am trying to set up a window to the top-

  -follow the instructions of top to select a backup disk - I did
  -Windows gives me an error message that the selected drive has been "marked as potentially damaged - check disk before use as back up.
  -in the past, this disc has been used ONLY as a backup disk
  -When you try to check (after Windows links) a message tells me the drive cannot be checked while it works - I have no problem with understanding that.
  -I wonder so I wish "disassemble this first volume" - "... all handles opened to this volume will become invalid..."
  -Do not understand what was required - and having no idea of the consequences (the disc 'way up', and what happens to the invalidated handles?) I replied "Cancel".
  -l' screen after you ask then if I want to check for errors at the next startup of my computer - I clicked on the button "schedule disk check.
  -When I started my computer nothing happened - what happened to "schedule disk check? How can I check the disc when firstly, it seems to be 'in service', but is only a backup to disk, and I thought that it only came into use when the reverse began to run?
  (I also tried to leave a message on one of the FAQ pages on back ups, but it appears that the number of characters is set to limit so low that you can't describe why the FAQ response is considered to be "not useful"
   
   
  Original title: Back Up system - disk and check

  Since this is a secondary drive chkdsk/r can be run without having to reboot.   Close all the programs that can access training and and when you run chkdsk say yes to "remove this volume first...". ».  This will cause no harm.  Although not strictly necessary, I recommend you to reboot once completed the disk check.   This will solve any problem related to the file handles.
  If chkdsk/r reports bad sectors, you should replace the disk.