Why can't select, copy and paste dictionary definitions on my iPhone?
Steps to produce this problem:
- Get into a philosophical debate with a friend about iOS Messages.
- Realize that your friend does not understand one of the words that you just used.
- Type the word in the text field and press it to look up the definition.
- See the definition of blissfully.
- Try to type, keep, select, copy + paste the definition to display your friend.
- Be really frustrated that you can't highlight the definition - then try to memorize it.
- Give up and think about why this could happen.
- Vain try to find a Discussion of Apple in this regard.
- Register so you can post a question about it, then after a matter of mood sarcastic but authentic.
- Naively, wait and hope that Apple is changing this one day.
You can either:
Send your feedback to Apple here: http://www.apple.com/feedback
Or use a different dictionary application which will allow you to copy and paste.
Tags: iPhone
Similar Questions
-
How can I select, copy and paste
Hello, I can't understand this. I want to remove the hand of the planet. I tried to select areas next to hand, so I can copy and paste, but I can't select on Abobe.
How to select the box next to the hand so I can copy and paste to remove the hand? Thanks in advance
What is a bitmap or a vector image? Illustrator can only handle vectors. If it is a bitmap image, you need a bitmap such as Photoshop Editor.
-
I have a 64-bit Windows 8.1 PC and use Internet Explorer 11 or Windows Chrome. Can someone talk to me through selection, copy and paste a PDF document in general? As well as my occasional to translate Spanish Pdf document need, I also like to know how to select, copy and paste into Notepad or WordPad, an e-mail or a document. I tried everything I can think but cannot make it work.
Just FYI: If you have PDF documents online (which contain 'real text' of course), you can also use Google Translate to translate the entire document. Click 'translate a document' under the entry field.
-
Why I didn't copy and paste layers or folders in Photoshop?
I honestly have a hard time understanding why I can't layers Ctrl + C and Ctrl + V, or folders (with styles and properties) in Photoshop, although I can with other elements in Photoshop and with almost all elements of all software published by Adobe (including the insurmountable more complex layers of an After Effects composition). I have long used different methods to copy layers and folders autour (double drag, etc.), but they can all be very heavy at times depending on the project and this is the specific workflow. For example, I just finished editing on the thirty selected RAW photos of an event in PS and I need either already have my watermark on them that I have edited, each of them or that I do now as a big batch of ol '-note: because I put my mark in a location unique photo based on its content This is the direction and My Eye stocks or batch commands do not work for this). My only option really is to visit the source document containing my watermark layer more than thirty times to retrieve a single item of data which could and should only be required in my Clipboard and available with a simple keyboard shortcut (note also that my brand fusion styles will be also adjusted according to the photo, excludes a selection of brand that can be copy and paste but only as a raster with an alpha channel layer).
Y at - it an explanation of why it's missing? Maybe there's a logical reason, I do not understand...?
See you soon!
Also use ctrl/cmd-J to duplicate (copy) a layer in the same document, which will retain all of its attributes. And as Trevor mentioned, you can just drag the layer in the layer panel to another document tab to replicate to another document - no menus, no workspace rearrangement.
-
How can I audio copy and paste from one slide to another in 8 Captivate?
When I try to copy a bit of audio from one side to the other, I copy and paste, but it doesn't work. Should be simple, but I was not able to understand.
Thank you
Captivate allows you to edit audio files in a certain extent, but you must make sure that you are in the EDIT Audio dialog box tab drag, not the tab add/replace.
You can't cut and paste a piece of audio from a slide to another using this dialog box. You can only copy and paste audio part of the audio clip to another part of the same clip. In order to combine audio from a separate clip you must insert the whole clip and then cut out the pieces you want. Tedious, I agree, but it's like that. If you have the creative cloud Adobe, Adobe Audition to edit your clips outside Captivate.
-
Can I easily copy and paste the entire DESKTOP for TABLET site?
Is there a way to copy all the contents of the OFFICE (I developed the site) on the TABLET and + PHONE modules? Am I expected to individually copy and paste all above?
You can copy and paste your content, but your real master pages should come from your Office Master pages. But usually phone versions specifically the one of dozens to have everything about them that is on the desktop site.
or you could just wait for the next version out or join the public beta version and do a layout of reagent.
-
Can I cut, copy and paste a block of text in PL/SQL Developer?
I have been using TextPad to create SQL statements by using the cut, copy and pasting of text BLOCKS.
Example:
I copy the describe a table, replace varchar, date will 10 spaces and copy the column names in a block then paste further down the TextPad.
Can I join the lines into a single string, replace the spaces with commas
Then insert the INSERT INTO tbl_name (before the name of column
Can I get the values by copying also and then paste text block where they need to go. ETC, ETC.
Thank you, BillConsider by text blocks, you hear the columns rather than rows. The answer is no.
But it takes, you can generate sql statements by dragging the table from the tree of the browser in a worksheet.
-
Select, copy and paste layer masks
Hello
I am a beginner when it comes to Photoshop, so my vocabulary can be a little off. I'll try my best to explain my situation. Let me know if I do not make sense, or if you need more details.
I have problems using a mask to create a selection that I can then use to paste a background image in an another PSD. I have isolated the part of the image that I want to select using a layer mask successfully, but when I try to copy/paste from an another PSD, the image appears as the "shadow" or the black silhouette that I used for the background of the original PSD image through the mask.
It is logical that this is happening because I select the mask which is only a black outline of the image I wanted to show through the second layer. But I saw on a tutorial that someone could "turn the mask in a selection that appears around the mask, so that you can then cut out the object and paste it into a different environment."
Here is the reference. It is the last two images in the tutorial:
Using layers with Photoshop masks
Any help would be greatly appreciated. Thank you!!!
To load the mask as a selection:
Hold down the CTRL key and click on the mask, now, the selection will be charged.
Then click on the thumbnail of the layer (NOT on the mask) and copy or cut the layer for any other destination
-
Can I select and copy and paste text from a browser with the pencil of Apple?
With the pencil of Apple on a new iPad Pro, I am not able to select, copy and paste text from a web page in Chrome or Safari. Y at - it a special order? A related question (not with a pencil): how to save files in PDF format.
Well, it seems to be workin now. Never mind.
-
Why is it I can't copy and paste with windows 7?
I have a new computer with Windows 7, why it won't copy and paste and where is the Clipboard?
See this thread as a possibility.
Although the Clipboard exists in Windows 7, there is no Clipboard Viewer.
-
Cannot play card games or go back in browsers and can not copy and paste.
Cannot play card games because cards won't move barely and solo cards to jump. Pages back far too often when I click the back button in ANY browser. I can't even copy and paste because the words will not remain highlighted. This started after I downloaded Advanced System Care, but I uninstalled and did a full factory restore but still doesn't change anything. How should I do?
Hi anyone,
1. do you get an error message?
2. the problem occurs only with?Method 1
I suggest you perform the clean boot and check if the problem persists.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: follow step 7 of section of boot KB929135 to the computer in normal mode.Method 2
Try the steps from the following link:The problems of the game performance
http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problemsMethod 3
Enable and disable the game
Step 1:Disable games for Windows:
1. go to start and in the search type "Turn Windows willing or not.
2. click on "Turn Windows features on or off".
3. go to the games and uncheck the brand in front of solitaire game.
4 restart the computer
Step 2: Turn on Windows games:
1. go to start and in the search type "Turn Windows willing or not.
2. click on "Turn Windows features on or off".
3. go to the games and place a check mark in front of the solitaire game.
4 restart the computer.
Turn on or off Windows features
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off -
I've lost the ability in pages of copy and paste graphics
I really like the pages if I need to copy and paste something, IE recipes with photos, but for some reason that my request has lost this function. Can someone help me please.
I'm on iMac 10.5 Maverick.
Lynne
What specific version of Pages is in use (menu Pages: pages)? Apple logo: free from the about this Mac for the current version of your Mac OS X.
Text is simply copied and pasted, but document objects (images, tables, forms, text box, graphics, etc.) must be singularly selected, copied and pasted between documents.
-
BlackBerry Q10 Q10 - How to copy and paste text
Hello again,
always try to understand how to use Q10
The latest obstacle is that I can not understand how to select, copy and paste the text into this device.
Frankly, I can find no way selection of text without the "mouse button".
In addition, I can't find or copy and paste functions.
Can anyone provide an overview, please?
Thank you
When you long press on a Word, a blue tint will appear with two points at each end. These points can be moved to highlight the text you want to copy. Then press the highlighted text and see the answer of stenb above for more information
-
Copy and paste the values in the table
I have a program that has several bays. Recently, there were about 80 new values more than I needed to add to each table. I just finished adding new values to one of the tables - is possible I can highlight and copy this entire block of values I added just so I can then paste it on the other tables? It seems that I can only highlight, copy and paste a value at a time.
Do it programmatically. Copy your table to a new VI. Subset of the table to obtain the portion. Add a copy of your other table table to build or Insert in the table. Copy the tables updated to the original location.
-
Cannot copy and paste in Windows Explorer
Hello
We have changed our SBS 2003 server to Server 2008. After I removed the domain and myself adding to the new domain, I can no longer copy and paste in Windows Explorer. Explorer crashes with the following error:
Problem event name: BEX
Application name: Explorer.EXE
Application version: 6.1.7600.16450
Application timestamp: 4aeba271
Fault Module name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 0807f4c8
Exception code: c0000005
Exception data: 00000008
OS version: 6.1.7600.2.0.0.256.48
Locale ID: 7177
Additional information 1: 0a9e
More information 2: 0a9e372d3b4ad19135b953a78882e789
Additional information 3: 0a9e
Additional information 4: 0a9e372d3b4ad19135b953a78882e789
What I've done so far, but still no luck:
1 added me (domain user) as a local administrator.
2 made some restorations system.
3. I can copy files in CMD promt is not a security problem.
4 also makes a clean bootPlease can you help me
M.R.
I read a few testimonials online that this can be caused by a damaged or replaced system file.
Try to start a CMD window (i.e., Run As Administrator) and running: SFC /VERIFYONLY
If it indicates problems you can use SFC to restore your protected system files: SFC/scannowIf you have full faith in the Microsoft System File Checker, you can ignore the /VERIFYFILES and just do the second command, because it will check the files and automatically restore any file that has been damaged or replaced. I saw no reason to be wary of SFC, but I would like to know what's going to happen before it happens.
-Christmas
Note: Edited to correct typo in the SFC command switch
Maybe you are looking for
-
Satellite L300D - 11 M - can I change the video card?
Can I change the graphics card in my notebook? For example on 512 or more?
-
scan mutiple pages into a single pdf
Printer Envy 120. How to scan multiple pages into a single document? If the solution is to change the resolution to 300 dpi or less, how do I do that? Thank you!
-
I had some trouble installing the above update (security for 2007 Microsoft Office system update: KB 2289158). When the update fails, the error I get says: Code 80070641 Windows update encountered an unknown error When I click on the link below the e
-
I miss Windows activation code, rest of this KWKRT-JJCT4-JHC product key-, is there anyway to get it backThank you.
-
How do you 'run as' Panel, or where can I find a list of command line options?
I use a laptop computer that I just installed a copy of XP on and continue to operate in the small problems of configuration and personalization that require administrator access to change.I know he will just be a little quick change, then right-clic