How to check for directory Department 6.3 Manager privileges

Similar Questions

• How to check for the two first digits?

  Can someone please... There is demand to have a hidden field on the form that will be filled with data. It's going to be 6 digits long and could start with 02 or 04. I need to check on the DocReady event, for the first two digits. If the first two digits are 02, the presentation of the form will remain as it is. If the first two numbers are 04, I'll have to show two hidden subforms. Can someone please provide an explanation on how to check for the first two digits of field 6 digits and do some actions.

  Thank you very much

  No, only in the event: Exchange.

• How to check for optional Oracle 10 g 2 installed components?

  Hello

  How can I get a list of oracle all optional components/functions installed database (some of them may require additional license)? I was going through a list of the directory objects in a database and I spotted "ORACLE_OCM_CONFIG_DIR" in one of the databases (others don't have it). When I checked, it turned out to be a directory required for Oracle Configuration Manager (it's maybe even a completely separate installation).

  I have to configure a new oracle database server where I have to install everything that is installed on an existing one.

  Oracle 10 g 2 - RHEL 5.8

  Please advise!

  Best regards

  Hello

  http://docs.Oracle.com/CD/E11882_01/server.112/e24448/statviews_4208.htm

  DBA_REGISTRY displays information about all of the components in the database that are loaded in the registry of the component.

  If this view lists the components loaded into the database... Well according to the docs of Oracle anyway.

  How to check to see if the CMO is installed must:

  http://docs.Oracle.com/CD/E12482_01/doc.103/e12481/ccrqs.htm

  Navigate to the ccr/bin directory and locate the emCCR file. If emCCR exists, the CMO has been configured.

  Don't think that you can get this information from a view.

• How to check for a button

  I have a form that presents itself. My submission is the standard:
  < input type = "submit" name = value "btnsubmit" = "Send your order" >
  
  When the form is submitted, I check for btnsubmit by using paramerexists or isDefined:
  < parameterexsits (btnsubmit) cfif >
  perform inserts, etc.
  < / cfif >
  
  It works very well. But my question is what do I do if the type = instead of submit button? For example
  < input type = "button" name = value "btnSubmit" = "Send your order" >
  
  I'm little javascrpt of validation that the form is sent when the user clicks the button. However, how to determine if the button was seleceted or not, so I can do my treatment (insert, etc.)? I tried using the isDefined or parameterexists as before, but it does not work?
  
  What is the command to verify that a button has been selected?

  given that your form is sent with a function js instead of a shipment
  button, the user clicks button on will not be submitted with the form.

  Add a hidden field to your form, say
  name = "subject" id = "subject" value ="" >
  your js validation add a line before calling submit():
  document.getElementById("submitted").value = 1;

  then on your page/form action processing code search
  

  HTH

  Azadi Saryev
  SABAI - Dee.com
  http://www.SABAI-Dee.com/

• How to check for the application ID in a function of connection?

  Hello
  
  I have a connection procedure which is something like this:
  

  wwv_flow_custom_auth_std.login(
      P_UNAME       => :P58_USERNAME,
      P_PASSWORD    => :P58_PASSWORD,
      P_SESSION_ID  => v('APP_SESSION'),
      P_FLOW_PAGE   => :APP_ID||':15'
      );

  And the authentication procedure is this:
  

  create or replace
  FUNCTION  "ACL_CUSTOM_AUTH" (
      p_username IN VARCHAR2,
      p_password IN VARCHAR2
      )
  RETURN BOOLEAN IS
  BEGIN
    FOR c1 IN (SELECT 1 
                FROM acl_employees
               WHERE upper(userid) = upper(p_username)
                 AND mot_de_passe = p_password)
    LOOP
      RETURN TRUE;
    END LOOP;
    RETURN FALSE;
  END;

  I want to check for an application in the acl_employees table ID, because I want to check if this user is credited for THIS specific APP_ID, adding a following kind of code to the function of authentication:

  AND application_id = :app_id)

  The problem is that the connection API takes in charge only two parameters for custom authentication: user name and password. How can I switch the APP_ID to authentication?
  
  Thank you for your help.
  
  Christian
  
  Published by: France Christian February 23, 2010 06:23
  
  Published by: France Christian February 23, 2010 06:24

  It is sometimes easier to check the user before calling the connection custom Apex then past just a password to NULL to the connection works if the check fails. Something like that before the connection:

  DECLARE
  v_dummy NUMBER;
  BEGIN
  SELECT 1
  INTO v_dummy
  FROM acl_employees
  WHERE upper(userid) = upper(p_username)
  AND application_id = :app_id;
  EXCEPTION WHEN NO_DATA_FOUND THEN :P58_PASSWORD := NULL;
  END;
  

• How to check for drive or how to remove all versions of reader

  I downloaded the installer for Reader 11. Installation gets to halfway through and gives an error message 'acroread.msi' is not a valid file for this product. I recently tried 10 and then back to windows Windows 7 due to the incompatibility of the graphics. While I was with Win 10, I downloaded CD player. Can have parts of two different versions. How can I check a drive installed or remove all versions and try again?

  You can use this tool to remove all facilities of Reader: Download Adobe Reader and Acrobat tool - Adobe Labs

• How to check for charts grouped using the FrameMaker API?

  I have a page with bundled graphics frame and also other graphic objects that are not consolidated or are grouped into a different set. How can I check if all the objects in an image are grouped in one package?

  Michael is correct. Specifically, the graphics have a FP_GroupParent property, which returns the ID of the FO_Group object that the graphic is in (if any). If the graph is not grouped, I believe that this property returns a value of zero. Thus, all graphics within a group will have the same value for FP_GroupParent.

  Note that you can combine both groups, which then makes things much more complicated. A FO_Group object also has a FP_GroupParent property that theoretically allows an unlimited amount of group nesting. I hope that you don't have to deal with that.

  Russ

• How to check for in the subsequence has the subsequence success or failure?

  Hello

  I need quick help:

  At the end of the subsequence in cleaning the section I want to check has this subsequence success or failure?

  How to do this?

  K.

  I think you're looking at Rustate.SequenceFailed.

• How to check for number of RPC in SQL Server 2000?

  Please let me know how check the number RPC in sql server 2000.

  Hello

  You should post this question in the TechNet forums.

  Forums TechNet - Windows 7 IT Pro

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• How to check for recent errors/messages?

  Is there a way to check the recent error messages? I seem to have a problem with my screen. I came back to my computer that was slowed down, so I clicked as usual to wake up. Some message came down to right on something to do with the screen, and then it disappeared before I could note what it was. Now my screen seems to be pushed over to the left a little cut elements on the screen.

  So is there a way that I can know what was this message that came? It's kind of irritating me because I always just go back to the computer and click on the mouse to open the screen up. Now, I have a problem, at least I think that the screen has evolved to the wire, it does not resemble the normal.

  Hello

  Windows Control Panel, open administrative tools, and then open the event viewer.  Let this load, then open the Newspapers Windows entry in the top right of the window.  The event you are looking for will be under the System or Application logs.

  However, the best way to solve this problem would be to run the Windows system restore.  If you have Norton Internet Security installed, you should disable Norton Tamper Protection as described in step 2, on the link below.

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20091112171719EN&LN=en_US

  Once you are done, turn off the PC.  Windows system restore is usaully better run in Mode without failure.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  When it has loaded, on the Start Menu, click principally made programs, accessories, click System Tools and run the system restore.  Choose a restore point prior to the issuance of the display and then proceed to the restoration.  When you are finished, Windows will restart normally.

  Best wishes

  DP - K

• How to check for hardware vmware esxi 5 is installed on

  Hello

  I took a vmware esxi Server 5.

  I need to evaluate on what hardware esxi 5 server is installed on. Is it possible to do - apart from opening the case?

  Thanks a lot for any help

  MIchael

  Hmmm... There are the available IMS and supervision of Adaptec in ESX server. Check out these threads just to feed the part of the brain

  http://communities.VMware.com/thread/158690?start=75&TSTART=0

  http://www.Thomas-Krenn.com/en/wiki/Adaptec_RAID_Controller_Monitoring_in_VMware

  Glad that you got your query using rvtools...

  Cheerios...

• How to check for visible pageItems?

  Hi all

  Is it possible to check if an item within a layer is visible?

  Also can you programatically make an item in a visible layer.

  I already know how to verify and make a visible layer, but I can't do the elements, such as images in a layer, to make visible/invisible.

  I know that you can do through the UI, but I would like to automate the process to go through each item and make visible/invisible.

  
  Any help would be greatly appreciated.

  See you soon

  #target illustrator
  
  var docRef = app.activeDocument;
  
  docRef.pathItems[0].hidden = true;
  redraw();
  alert('Bloody lazy redraw');
  docRef.pathItems[0].hidden = false;
  redraw();
  

• How to check for the date validation

  Hello
  
  I have 3 validation of date in order.
  
  10 - P1_FROM - (type - Item specified is a valid date)
  20 - P1_TO - (type - Item specified is a valid date)
  
  30 compare dates P1_FROM & P1_TO
  I want to run it only when these 2 dates are field not null not and registered as valid a date.
  HOW to set that State...
  

  Type - Function returning bollean
  
  Validation Expression1 - 
  if TO_DATE(:P1_TO,'MM/DD/YYYY') <= TO_DATE(:P1FROM,'MM/DD/YYYY') then
       return false;
  else
       return true;
  end if;
  
  Condition- PL\SQL Expression // I want to put a condition here NOT NULL as well as VALID date
  :P1_FROM is not null AND
  :P1_TO is not null

  Thank you
  Deepak

  Try an exception handler. for example

  begin
  if :P1_TO is not null and :P1FROM is not null then
    if TO_DATE(:P1_TO,'MM/DD/YYYY') <= TO_DATE(:P1FROM,'MM/DD/YYYY') then
      RETURN 'From date cannot be after the To date';
    end if;
  else
    if :P1_TO is null and :P1FROM is  null then
      null;
    else
      RETURN 'Both To and From values must be specified';
    end if;
  end if;
  EXCEPTION WHEN OTHERS THEN
    RETURN 'Invalid Date';
  end;
  

• How to check for the ConnectionState of ESX hosts

  Hello

  I would like to be able to check the status of connection to a host list before executing a block of code against the list of hosts. If the host is in a disconnected state, I want also to write in a name csv file and connection status of any host that is disconnected before you run the code block against the rest of the hosts in the list.

  That's what I've tried so far:

  $ESX = "C:\Temp\host.txt".

  foreach ($vhost to $ESX)

  Get-VMHost $ESX | Select Name, ConnectionState
  If ($vhost. ConnectionState - eq 'offline') {}

  {
  $vhost | Export-CSV "C:\Temp\report.csv" - NoTypeInformation
  }
  }

  Thank you

  Try like this

  $ESX = "C:\Temp\host.txt".

  Get-VMHost-name $ESX |

  Where {$_.} ConnectionState - eq 'offline'} |

  Select Name, ConnectionState |

  Export-CSV "C:\Temp\report.csv" - NoTypeInformation

• How to check for non-unique values

  Hello
  
  First the table structure and data table.
  

  CREATE TABLE SAMPLE (ILOAN_CODE NUMBER, TRAN_ID VARCHAR2(10),PAY_PRINIPAL NUMBER, PAY_INTEREST NUMBER);
  
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1068, 'DEF', 0, 0);
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1068, 'CO', 0, 0);
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1077, 'DEF', -16.57, -36.16);
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1077, 'CO', -16.57, -36.16);
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1082, 'DEF', -114.56, -22.44);
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1082, 'CO', -114.56, -22.44);
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1130, 'DEF', 0, 0);
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1130, 'CO', 0, 0);
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1202, 'DEF', 0, 0);
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1202, 'CO', 0, 0);
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1219, 'DEF', 10, 10);
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1219, 'CO', 9, 8);
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1221, 'DEF', 0, 100);
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1221, 'CO', 0, 1000);
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1258, 'DEF', -11.66, -19.28);
  Insert into SAMPLE
     (ILOAN_CODE, TRAN_ID, PAY_PRINCIPAL, PAY_INTEREST)
   Values
     (1258, 'CO', -110.66, -19.28);
  COMMIT;

  WE HAVE ABOUT 9 CODES OF LOAN IN THE SAMPLE TABLE. FOR EACH LOAN CODE, WE HAVE 2 FOLDERS WITH TRAN_ID 'DEF' AND 'CO '.
  WE CAN FOR ALL LOAN CODE RECORDS THE COLUMNS PAY_PRINCIPAL AND PAY_INTEREST TO BE THE SAME FOR EACH LOAN CODE, WITH THE EXCEPTION OF THE LOAN CODES
  1221 AND 1258.
  FOR 1221, WE SEE PAY_INTEREST DIFFERENT COLUMN AND
  TO 1258, WE SEE DIFFERENT COLUMN PAY_PRINCIPAL.
  AND 1219, WE CAN SEE THE PAY_PRINCIPAL AND THE PAY_INTEREST OF THE DIFFERENT COLUMNS.
  
  WE NEED TO IDENTIFY THESE RECORDS.
  
  Please notify.

  Hello

  So, you want the same output as the request of Vivek? One way is to use the query of Vivek. Another is:

  SELECT       t.iloan_code
  ,       t.tran_id
  ,       t.pay_principal, t.pay_interest
  FROM       sample  t     -- t is for "this" row, o is for "other"
  JOIN       sample  o  ON          t.iloan_code      = o.iloan_code
                 AND     t.tran_id     != o.tran_id
  WHERE       t.tran_id          IN ('CO', 'DEF')     -- If needed
  AND       o.tran_id          IN ('CO', 'DEF')     -- If needed
  AND       (    t.pay_principal     != o.pay_principal
         OR   t.pay_interest     != o.pay_interest
         )
  ORDER BY  t.iloan_code
  ,       t.tran_id     DESC
  ;