How to check the version of the BIOS is not damaged on Equium A60
I have another thread in regards to IEEE 1394 host controller usually start and other strange questions for Equium A60.
Regarding above, I feel THAT BIOS can be altered that I cut two pins to get rid of power according to the tried and tested instruction on another site, the BIOS password. Properly deleted BIOS password! Password requirement has occurred after that the computer is not used for a long time. Maybe the short circuit with a paperclip to cause corruption of the BIOS? Computer note seems to maintain time and date so battery CMOS OK?
Can I reflash the BIOS or require special equipment? Any help appreciated more
Hello!
Why would you say that the BIOS is intact?
If you have downloaded the BIOS Toshiba it s not intact. Toshiba doesn't offer these BIOS versions, they would be tested before.
The BIOS (for example with an older version), you can reflash t. This can make an ASP (authorized service provider). If you wish, contact your local ASP. Only, they know to do this and will not get such textbook because it s a user to user forum.
Good bye
Tags: Toshiba
Similar Questions
-
Update of the BIOS has not now my Equium A60 will not work
I tried to update my BIOS I've been experiencing problems with my keyboard and screen but to halfway through the laptop died, he seemed to be a glitch with the power! ... today obviously it not light!
Do I need a new motherboard or I can buy and replace the BIOS chip?
I have an A60-181 PSA67E.
Kind regards
IanHI Ian,
In situations such as yours, the best option is to contact a Toshiba authorized Service partner who will have the necessary equipment for re-flashing your CMOS with the latest BIOS chip. This will be a much cheaper option than to replace the motherboard or BIOS chip
-
How to check the table (null / not null) on the screen?
Hello all :)
I am beginner in JDEV
I have problem with table.
When you view the table, I want to know if the existing data in the table are empty or not (check the query zero / non-zero)? How to do
someone help me... :))
THX
agungdmtHello
If you use ADF BC, access the iterator and call getEstimatedRowCound
Table richeTableau = get JSF component binding to table
TableBinding JUCtrlHierBinding = (JUCtrlHierBinding) (table.getValue ()) .getWrappedData ((CollectionModel));
DCIteratorBinding iter = tableBinding.getIteratorBinding ();int count = iter.getEstimatedRowCount ();
You can do the same thing in EL
#{bindings.iteratorName.estimatedRowCount > 0}--> true if given
Frank
-
Tecra M5 - how to remove the Bios password?
Hey guys,.
My Tecra M5 got a password for BIOS from one day to the other, I never told him to do.
All of my passwords do not work, so how can I reset the password?
Please help me :)
I never heard that the BIOS password can be activated only then I m wondering really how that can happen in your Tecra M5.
You must understand that the BIOS password is a very important protection and we cannot discuss in the public forum about this.
How to remove the BIOS is not always the same and Tecra, as cell phone business model, is quite complicated procedure of withdrawal of the BIOS and it can be made by Toshiba only service provider.I'm sorry.
-
I just bought more Ram how can I check the bios updates before I install it?
I bought 2 4GBs 200 PIN DDR2 memory from Crucial to upgrade my Pavilion dv4t notebook 1400 from 4 to 8 GB
Series (DDR2) (p/n NS244AV)
I am running Win 7 Ultimate 64-bit service pack 1
The directions say I need check the bios with the maufacturer updates to see if I need to Flash the bios before installing the new memory. How do I do that?
Thank you for your help
See "updating the BIOS" to determine the current version of the BIOS installed and the update of the BIOS if necessary. Please see the HP Pavilion dv4t-1400 CTO Entertainment Notebook PC drivers & downloads page to the latest BIOS version available for your computer. Click on version update for HP Notebook System BIOS (Intel processors): F.66 A for a direct link with the BIOS download page.
Please click the White Star of KUDOS to show your appreciation
-
How to check the version of the firmware of the HP Photosmart 7525 is up-to-date? And where can I go to download the latest firmware?
Hello
Follow these steps to check the update of firmware for your printer:
Note: the printer must be connected to your network to check the updates, if it is connected with a USB key follow the steps in the tehse to connect the * beep * to your wireless network:
- In the wireless menu, tap Settings.
-
How to check the firmware version?
Hello
How to check the version of firmware on my device?
Help, please!
Thank you
Hello mohsen122002,
Hope that this page will help you.
-Bryan-
-
How to check the version of the odsee?
Hi all
How to check the version of the odsee that was installed? whether (g 11 or 11 GR 1 material etc. etc.)
I know for dsee7, I can easily connect to dscc and top left it there a release button.The command line, the option is:
#. / dsadm - version
[dsadm]
dsadm: 11.1.1.5.0 B2011.0517.2158 ZIPCopyright (c) 2011, Oracle and/or its affiliates. All rights reserved.
[slapd 64-bit]
Oracle Corporation.
Sun-Directory-Server/11.1.1.5.0 B2011.0517.2158 64-bit
NS-slapd: 11.1.1.5.0 B2011.0517.2158 ZIP
Slapd Library: 11.1.1.5.0 B2011.0517.2158
Frontend library: 11.1.1.5.0 B2011.0517.2158HTH,
Marco -
How to check the version of cmlwcu.o?
Dear all,
Good days.
How to check the version of cmlwcu.o? I can only find these files in my server:
myermt01@Oracle:/PRODAPPS/prodappl/BOM/11.5.0 > find /-name "* cmlwcu *" 2 >/dev/null
/PRODAPPS/prodappl/BOM/11.5.0/lib/cmlwcu.o
/PRODAPPS/patches/20090913_2/3039067/BOM/lib/cmlwcu.o
Help, please.Hello
How to check the version of cmlwcu.o? I can only find these files in my server:
myermt01@Oracle:/PRODAPPS/prodappl/BOM/11.5.0 > find /-name "* cmlwcu *" 2 >/dev/null
/PRODAPPS/prodappl/BOM/11.5.0/lib/cmlwcu.o
/PRODAPPS/patches/20090913_2/3039067/BOM/lib/cmlwcu.oUse the adident command or strings.
$ adident Header /PRODAPPS/prodappl/bom/11.5.0/lib/cmlwcu.o
pus
$ string -a /PRODAPPS/prodappl/bom/11.5.0/lib/cmlwcu.o | grep Header
How to find the version of a file pls
Re: How to find the version of a file plsCommand to find versions of files under Linux
Re: Command to find versions of files under LinuxThank you
Hussein -
BOOTMGR is missing is a message I get the start. Checking the BIOS tells me HDD 1 fast (303).
Hardiskerror wrote:
Unfortunately I do not have the recovery discs HP or do it on a USB key. It does not start in Windows (I tried to download a recovery on another computer disc but was not sure if it's a 32 or 64-bit). It will allow me to boot from CD option but freezes when it says "starting windows."
Anither problem just happened, as I was looking at the parameters of the Bios, the laptop turned off. Now when I try to return to this subject will not be. All that happens is that leads him 3 to forward flash 3 times (power, load and HD Led).
Best wishes
Roland.
If the sticker OEM Windows on the laptop says Windows Home Premium, then it was probably 64-bit. You'll need to do a few things to bring your laptop into a useful state again.
(1) remove the old hard drive from the laptop. Buy a new one and install it yourself, or have been in a store.
(2) remove the battery and external power adapter and press the power button for 15-30 seconds. Plug the adapter external powre (leave uninstalled, battery). Now you should see it start BIOS and complain that it cannot find any bootable OS.
(3) the set of recovery discs HP laptop of HP or purchase a licensed Windows Installation DVD. You can also download a version of Linux and install it on your new drive hard if that is your choice.
How to order a HP recovery disk.
Best regards
ERICO
-
How to enter the BIOS on Satellite U200 settings?
How can I get into the BIOS menu until windows has started?
When the laptop starts up, I press F2 so he give chose device which need to read.In my other pc I push DEL and the BIOS is here.
I have the Satellite U200. I have software called
and write BIOS version 1.10.04/03/2004 There must be key to enter the BIOS settings.
To wear? s manuals I na? find information about entering the BIOS settings.
Hello
To enter the BIOS settings, please press the ESC key at startup upward. After that, press F1.
By the way: when you start the laptop for a moment you can see the message how to enter the BIOS settings. It is displayer downstairs left at first upward.
Button led will be used on desktop computers, not on laptops.
Good bye
-
How to access the BIOS on Satellite C50-A-1F
Hey folk,
A small question:
How to access the BIOS of my laptop?
I tried this method and f12, f1, f2 etc.
Thanks in advance
Have you ever tried to look for similar issues here in the forum?
Check this one:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=76740 -
How to access the BIOS on my Satellite 5205 settings?
Hello
I have a laptop of s703/5205 series of satellites. How can I access the bios settings? When I switch on I get the screen "Welcome to toshiba." There are some keys I press during the boot process? On my other laptop I usually press 'DEL' or 'F2 '.
I would be grateful assistance as my portable computer touchpad and, when connected, the external mouse freezes during normal operation. Sometimes I can navigate with the keys alt & tab, sometimes everything crashes. Also I get error messages saying "device connected to the usb port not recognized" Although there is no device attached to my laptop. I tried to plug an external mouse to see if that solves the problem of touchpad but the mouse freezes also.
I need to check the bios settings, bios access help would be really appreciated!
Thank you all!
Hello
The keys to use are dependent on the age of the laptop and also what manufacturer of BIOS you have.
Usually by pressing ESC will show the progress of the BIOS during the startup phase.
Pressing F2 usually you will take in the BIOS Setup menu, press F8 brings you to the 'Start' menu (where you can select the safe, etc) and finally F12 will give you the selection of "Boot Device" menu where you can select the hard disk, CD-Rom, etc. as boot device.
HTH
-
Satellite U300 - how to upgrade the BIOS on a Linux system?
Attempt to update the BIOS of my U300-153, which is described as an operating system independent on the download page, I find that the upgrade file is provided in
http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20090304140640.zip
does not include the files to create a bootable CD, as described in the instructions to the
IOS http://eu.Computers.Toshiba-Europe.com/innovation/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07
where Option 2 step 2 lists the files that are in the zip, and they are required to make a bootable cd. The files listed are not in the zip.It forces me to use Windows. My Windows is broken and I can't fix it, because Windows repairs destroy data (clearly indicated on the packaging of recovery CD) and installations of Linux. My Linux works very well, and I don't want the windows more.
So how can I upgrade the BIOS? Either:
1. use a true independent bundle of BONES (ie the promised approach of bootable CD). I can't find such a thing here.
2 reinstall Windows, which trashes the laptop.Any suggestions?
Sincerely,
Aleksander K> How to upgrade the BIOS on a Linux system?
Is not possible since the BIOS on Toshiba page is a victory-based BIOS version and if you want to update the BIOS then you need to install the Windows operating system and then you can run the exe fileWelcome them
-
How to enter the BIOS on Equium L10 settings?
Please can someone tell me what I press the button too enter the setup of the bios at the beginning when I turn on my pc cos I tried everything, but nothing works.
Hello
Whenever when you switch the laptop you see on the low left hand site short instruction how to enter the BIOS settings. In your case you must use the F2 key. Please, keep it down immediately after switching on the laptop.
Generally, Toshiba laptops come with two different versions of BIOS (producer of BIOS):
-TOSHIBA BIOS: enter using the button ESC and F1
-Phoenix BIOS: enter using the F2 key.According to the specs of your device has Phoenix BIOS.
Good bye
Maybe you are looking for
-
I can't get Firefox to work on my Mac G5 computer, since I have excluded the last proposed update today. Now, he says he is not supported by this computer. I would like to know where to go to get the older version that I had been using version 9.0.1
-
Satellite A30 - lost BROWSEUI.dll
My laptop was running at random, then I did a restore of the system 2 months ago (before I downloaded the MP3 software). BUT now I can't start.Turn on I access ok welcome screen and can select my user space, but during bootup, I get the "Explorer.exe
-
Windows Live Mail does not open
Got successful with a peak of power while that in Windows Live Mail, now WLM will not open. On XP. Repairs for the series RAN Live does not. What should I do?
-
I have windows XP with SP2. Device drivers audio USB is unable to detect my Casio keybaord (piano) after the upgrade to Intel core i5. Usually, when I connect my keyboard via USB, the drivers used to get automatically installed. But now he is unable
-
After XP to upgrade file Windows 7 stuck in read-only State.
Upgraded from XP Home to Win 7 Home Premium. Number of records is stuck in read-only State. I tried what is obvious: clic click on folder, uncheck the read-only and apply to all folders/subfolders. Also, went to security and gave to all users and gro