How to click on a .jpg image in Blackberry 4.5?

Similar Questions

• How can I prevent imported jpg images going soft first elements 11?

  I have several graphics in the form of jpg images that have strong air in my editor (Corel PhotoPaint), as well as the Windows Viewer. But when I import premiere elements 11, they get pretty sweet. Any suggestions on how to avoid this would be greatly appreciated.

  Thanks to you and John Smith. The size was the issue. For reasons too esoteric to go in, the jpg files were much larger that they should be. I have their re-sampled in Corel PhotoPaint and decreased the size (but not the CIO) of 75%. Who did. Interestingly, before I made the change, I have noted that none of the giant files would play in the clip viewer... they just came up as a draft. It is another indication of the problem, and it disappeared once I have shrank the files.

• How do I batch of jpg image hosting site to download files?

  I recently did a reset of Firefox and I'm unable to download a new plug-in/add it. Before the resetI, I had installed FlashGot (?) who put an icon in the lower right of the page. To record a video, I click with the right button on the icon and choose my download options. I think what Flash is.
  Now I have an icon that shows a greyed on the arrow pointing downwards with a red X. I can't understand.

  In addition, before the reset, I had an addon that would allow me to download videos from You Tube by putting a red download button on any YouTube video. Simple. However, I can't find this addon is.

  Any help would be greatly appreciated. !

  TIA,
  Jim

  It is a popular video downloader. Its icon looks like 3 spheres that overlap, so probably not the one you had before.

  https://addons.Mozilla.org/en-us/Firefox/addon/Video-DownloadHelper/

• How can I make the JPG images inserted into a visible table cell?

  Dreamweaver CS4 - Macintosh iMac OSX 10.9.5

  DW has been great to work for ten years. I have a very simple website with a few tables and multiple images.

  He did all of a sudden all the images I have insert invisible. The 'elements - Visual Aids Invisible' is checked.

  I need to make changes to the site, but I'm frustrated. I can't add or replace images.

  I don't want to upgrade to creative cloud.

  Help!

  Benniemc wrote:

  Dreamweaver CS4 - Macintosh iMac OSX 10.9.5

  DW works a lot for ten years. I have a very simple website with a few tables and multiple images.

  He suddenly made all the images I have insert invisible. The 'elements - Visual Aids Invisible' is checked.

  It's all good and dandy that Nancy and Jon say that they see your site online will be images. Correct me if I'm wrong but... the real problem is that just inserted images are not visible in Dreamweaver making any visibility on the site online a moot point, right?

  best,

  Shocker

• How to store default path folder image in blackberry?

  How can Hi all., I get picture of store by default path folder in blackberry JDE 4.5.0? I need to save this image on RMS... I can't use FileSystemJournalListener because I use MIDP to develop my Application... Thank you...

  Try this Knowledge Base article.

• How to put text on the image of blackberry?

  I'm a Blackberry app. In my application I need to show show text in an image. So I used this code.

  tab1 = new LabelField ("Page 1", LabelField.FOCUSABLE |) LabelField.HIGHLIGHT_SELECT) {}

  protected void paintBackground (Graphics g) {}
  TODO self-generating method stub
  super.paintBackground (g);
  EncodedImage tmpimg = EncodedImage.getEncodedImageResource ("ic_menu_refresh.png");
  try {}
  g.drawImage (0, 0, 70, 40, tmpimg, 0, 0, 0);

  }
  {} catch (IllegalArgumentException iae)
  System.out.println ("bad arguments.");
  }
  }

  Protected Sub layout (int width, int height) {}
  Super.Layout (width, height);
  setExtent (70, 40);
  };

  Protected Sub paint (figure net.rim.device.api.ui.Graphics) {}
  graphics.setColor (Color.WHITE);
  Super.Paint (Graphics);
  };

  };

  This code text giving on image but I want that this text not on the center of the image. I want it on the bottom of the image. I also want to resize the image depends on the size of labelfield... Please help me friends...

  I'm curious to know why you want to avoid having a VerticalFieldManager? It's a standard way of BlackBerry to arrange fields and managers vertically. He respects the flags of horizontal alignment (FIELD_LEFT, FIELD_HCENTER and FIELD_RIGHT) for "children" and does not take into account all verticals (naturally!).

  It also respects the margins of fields, which is a huge advantage - you just put properly and let the BlackBerry primitives to take care of the presentation of the screen for you. Don't try to reinvent the wheel - channel your time and energy into the functional parts of your application.

• How can I get a tab opens in a jpg image oversized in its original with scrollbars size when I click a link?

  I have a small program to store my names of genealogy and the jpg images of the Census pages where each name is found. The images have a thumbnail link which opens in a new tab to display the page real oversized census. In the new tab page of the census is small and not readable. How can I get the jpg image to appear in its original with schroll bars size so I can read the census in the firefox browser without using the zoom feature. It takes several clicks on the zoom to get the picture to a readable size and it's a lot of time, especially when I have several open images.

  Enter Subject: config as an address in the address bar, and look for a setting named browser.enable_automatic_image_resizing (you can type part of it in the filter to reduce the number of displayed items).

  Set this false preference and now oversized images now appears in the original default format. Clicking always resize the image to fit the window.

• How to make a simple slideshow DVD of a group of .jpg images?  No music, no fancy transition. iDVD > magic DVD comes close, but the quality is poor and I want the images in a specific order.  I also have iLIFE ' 09, which includes iPHOTO

  How to make a simple slideshow DVD of a group of .jpg images?  No music, no fancy transition. iDVD > magic DVD comes close, but the quality is poor and I want the images in a specific order.  I also have iLIFE ' 09, which includes iPHOTO

  1. put the image files you want in the slide show in an album and genre as you want. Follow the Apple document to prepare images for iDVD: iDVD ' 09 (7.x): preparing images for iDVD slideshows

  2 - Launch iDVD and select an older theme, not animated.  You can change the background of the theme by dragging the image file of your choice, black or other, in the display pane for the menu.

  3 - Click on the button '+' and add a slideshow from the menu.

  

  4. double click on the sideshow button to enter the mode of construction of the slide show.

  5. in the media pane click the Photos button.

  6 - click on iPhoto and find the album you created with selected images.

  

  7. Select all images in the album and drag to the left in the slide show window.

  8 - Select the transition for the slideshow and the time for each slide on screen

  9 - follow this workflow to help ensure the best DVD video qualty:

  Once the project you want it save it as an image disk via the menu file → save as Disk Image . It will separate from the process of encoding of the burning process.

  To check coding mount the disk image, launch a DVD player and read it.  If it plays OK with DVD, encoding is good.

  Burn burn to disc with utility disk or toasts to the slowest speed (2 x - 4 x) in order to ensure the best quality.  Always use higher quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are recommended in these forums.

  

• I can't the .jpg images that are included in Outlook Express in a format that I can see the whole picture without scrolling. How can I change this?

  When I have a message in Outlook Express, which is a .jpg image I see about 1/5 of the image without scrollling it up and down and from left to right. It is a problem that arose after some other problems with my computer. How can I change this?

  When I have a message in Outlook Express, which is a .jpg image I see about 1/5 of the image without scrollling it up and down and from left to right. It is a problem that arose after some other problems with my computer. How can I change this?

  =====================================
  Outlook Express is not automatically adjust pictures to adapt to the
  the fact of the screen as Windows Picture and Fax Viewer.

  If you receive photos that are more than 640 x 480
  scrolling will be probably needed. On this day of
  very high-resolution pictures... unless the senders
  resize photos before sending them, they will be huge.

  In Outlook Express... If you go to... Tools / Options /.
  Read... tab and check the box... «read all messages»
  clear"... you will not see the photos in the
  body of the message, but as an attachment.

  Then you can left click the paperclip and the click left one
  file name photo and Windows Picture and Fax Viewer
  will launch for photo viewing.

  Best bet would be IMHO to save photos in a folder
  disk your hard drive and view them from there. Personally
  I prefer the original versions to receive total sizes of the
  the photos because they are best for printing and editing.

• Whenever I click on the Bing Images, I am sent to Google Images, how can I stop this?

  I use the Bing search engine, and when I click on the Bing images section in the search results page, I'm redirecteld to google images. How can I stop this from happening?

  You can also check for suspicious extensions or recently installed unknowns.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I clicked to block an image on my timeline of facebook, and now ALL my pictures are blocked. How I resote this unlock? Help!

  I clicked to remove an image from my timeline of facebook... on the "cards" on my home page section. What I actually did was to block pictures on facebook... or something like that. I don't know how to restore them or pledge. I now have all the pictures on my profile page... I can not download any other... they are blocked... I need HELP!

  You are welcome

• Can someone tell me please how to convert a document image in a JPG image?

  I want to download my image saved as a document and says that I have to change it to a JPG image.

  Right-click on this image, and then select open with, paint,

  Click on that button dark blue file and point to save as, it will show a few files types jpg can be one of them.

  http://Windows.Microsoft.com/en-us/Windows7/using-paint

  You might even think using shift + prntscrn or print screen and paste the screen shot into paint and then perform the backup as in painting.

• How to use UTL_FILE to print a JPG image in a CLOB

  I'm using Oracle 11.g.  I have an Oracle Apex application that generates automated emails. In the Apex, the user inserts a JPG image in a rich text field. This image is stored in a CLOB field. When it's time to send emails, Apex calls a stored procedure that reads the JPG image and stores it in a local variable called l_image_clob. The procedure of sending the embedded image with the rest of the body by e-mail to a list of users. (Note: this an embedded image and it is not an attachment). It all works very well.

  Now, I try to save the JPG image content stored in the l_image_clob variable in a JPG file on the server. The server is located on a Windows 7 platform.  The following code generates a file named correctly and the size of the file is correct, but it is not readable by the system. I get the error "is not a valid bitmap file" when I try to open it with Microsoft Paint. The image in the clob data looks something like: / 9j/4AAQSkZJRgABAgEAZABkAAD/4RXaRXhpZgAATU0AKg (a bunch more data) SSSSUpJJJJSkkkklKSSSSU / / Z

  How do I use utl_file to save the JPG image bank in the l_image_clob variable to a valid JPG file?

  -- Here's the code which creates the file that is "not a valid bitmap file"
  -- Create a file based on the content of l_image_clob
  l_image_filename := 'image_' || p_event_pkey || '_' || i ||
  '.' || l_image_ext;
  l_file_handle := utl_file.fopen(l_dirname , l_image_filename, 'wb');
  -- wb is write byte. This returns file handle
  <<inner_loop>>
  for i in 1 .. ceil( length( l_image_clob ) / chnksz )
  loop
  utl_file.put_raw( l_file_handle,
  utl_raw.cast_to_raw( substr( l_image_clob, (i-1) * chnksz + 1, chnksz )));
  utl_file.fflush(l_file_handle);
  end loop inner_loop;
  utl_file.fclose(l_file_handle);

  procedure clobbase642file (p_clob clob, p_dir varchar2, varchar2 p_filename)

  is

  t_buffer varchar2 (32767).

  number of t_pos: = 1;

  number of t_size: = nls_charset_decl_len (32764, nls_charset_id ("char_cs"));

  number of t_len;

  t_fh utl_file.file_type;

  Start

  t_fh: = utl_file.fopen (p_dir, p_filename, "wb", 32767);

  t_len: = length (p_clob);

  loop

  When the t_pos output > t_len;

  t_buffer: = replace (replace (substr (p_clob, t_pos, t_size), Chr (10)), Chr (13));

  t_pos: = t_pos + t_size;

  all in t_pos <= t_len="" and="" mod(="" length(="" t_buffer="" ),="" 4="" )="">0

  loop

  t_buffer: = t_buffer | Replace (replace (substr (p_clob, t_pos, 1), Chr (10)), Chr (13));

  t_pos: = t_pos + 1;

  end loop;

  UTL_FILE.put_raw (t_fh, utl_encode.base64_decode (utl_raw.cast_to_raw (t_buffer)));

  end loop;

  UTL_FILE.fclose (t_fh);

  end;

• How to create a camera profile that works with a JPG image with my color chart to check inside? [was: color Checker chart.] Really need help]

  I got a color chart to check. It came not with any software whatsoever. I shoot my images in JPG format. I know it's not really ideal but I'm on a tight budget and don't have the money for a digital SLR cameras that shoot raw. Is there anyway that I can always create a camera profile that works with a JPG image with my color chart to check inside? My table also includes RGB values below each color. Maybe I can match each color in the photo these values manually? If so how is this done?

  Thank you

  Bryce

  I've never seen software that does what you ask for JPGs, only RAWs.  The main problem is that any profile or adjustment is calculated according a JPG of a particular chart photo would apply to the other JPG photos with the same white balance.

  Jpg does not use "camera profiles" anyway in Lightroom, the profile is always integrated.

  There is a product that allows to calculate the HSL cursor offset values given a JPG photo their own table owner who looked like a color checker, but had two lines reversed so the software could not be used with a standard-checker color, unfortunately.  Now their table has twice as many patches (48), and looking at it on their site I'm not too sure that it does not always work with JPGs or if she's just raw files, now.

  The graphic and software are called SpyderCheckr of Datacolor.  There are various software that do different things, but none are using a ColorChecker, so having one is mainly a loss until you get a camera that can take raw photos, so keep a humidity and temperature controlled environment as much as possible until you have the right camera.  You can probably use the grey patches to adjust exposure, but that's all.

  Today you need not a digital SLR to have raw photos, well.  My phone Galaxy S6 with the last update of Marshmallow and the software of camera update will take photos in format raw DNG in Pro mode which I can create custom profiles camera to use a ColorChecker, although the camera is really good in itself, so when I found everything first he could make DNG I took a little but now, I usually just use the camera to make the jpg unless the shot is really important and the lighting is not too hard.  I think that S7 phone's camera is even better.

  What kind of camera do you have?  Sometimes, there are firmware hacks that allow the camera to shoot raw format even if the standard camera cannot.

• Having just upgraded Windows 8.1 for Windows 10, my (old) version of Photo 5 elements crashes with a message "not responding" have double click on the jpg file.  He always loaded the image at the point Windows 8.1.

  Having just upgraded Windows 8.1 for Windows 10, my (old) version of Photo 5 elements crashes with a message "not responding" have double click on the jpg file.  He always loaded the image at the point Windows 8.1.

  Any ideas?

  davids62398138 wrote:

  Having just upgraded Windows 8.1 for Windows 10, my (old) version of Photo 5 elements crashes with a message "not responding" have double click on the jpg file.  He always loaded the image at the point Windows 8.1.

  Any ideas?

  It was reported many problems with older versions of PSE and WIN10.

  Can you open PSE from office or from the list of programs on the start menu?