How to combine tables and façade design?

Similar Questions

• How to combine (c) and (g) all [WINDOWS 8]

  my friend made a new volume (G and I still use it, my laptop started getting too slow and noticed that (C a 15.5 GB left 220 GB (this is not the system), so I wanted to know how to combine (G [not a 220 GB not used] with (C.))))

  Yet one thing, my caps lock stops flashing for a minute or two, don't know if I should do something

  My laptop has ' windows 8 '.

  Hi omar1231,

  Welcome to the community of HP, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you want to combine the two discs, and I'll be happy to help you. There are two ways to do this. A method requires you to purchase software to partition and comb the volumes in this way. It would be a third-party software, so I can't really recommend a particular program.

  The second method uses Disk Management, which is part of your operating system. Search for disk management and you will see happen 'Create and format hard disk partitions. Which will open the disk management. Now this method will not work unless the partitions are side by side. So if you have a partition recovery or tools or another partition between C and G, it does not. If they are side by side you can right click on the volume of G and select delete the Volume, which removes the volume but not the partition. Right click again and Delete Partition. Then on the C volume, do a right click and select Extend Volume and follow the instructions.

  Thank you

• How FLASHBACK all TABLEs and indexes in a certain pattern for a restoration of p?

  Today I read a few web pages on how to use FLASHBACK to restore to a Restore Point.
  
  Unfortunately, all of these examples show just how to restore a single TABLE for example
  
  FLASHBACK TABLE t to RESTORE POINT before_we_do_anything;
  
  But how can I FLASHBACK all TABLEs (and indexes and other dependent objects) in a certain pattern to a one-step restore point)?
  
  FLASHBACK myschema.* to before_we_do_anything POINT of RESTORATION;
  
  does not work.
  
  Peter

  There is nothing like that. However, you could flashback the entire database to a point in time. It would of course have implications through patterns all the good.

  Nicolas.

• How to join tables and get ppl not in the list of the other table

  Hi, I have 2 tables

  Table (girlscoutid, quarter, point)

  Table b (girlscoutid, fname lname)

  I want to get the names of ppl who didn't sell any point/s for Q4

  girlscoutid	agenda	quarter
  7771	drinks	4QS
  9000	Tickets	4QW
  7771	Cookies	2QS
  5085	books	3QF
  3010	Tickets	3QW
  5085	Cookies	1QF

  lscoutid	fname	lname
  7771	Jenn	Richochet
  9000	Laura	Wilkins
  5085	Sally	Mae
  3010	Dora	McKenzie

  That's what I have, however, I get duplicates and also 7771 appears on the list even if she sold something on the 4th quarter. Any suggestions?

  SELECT fname, lname, a.girlscoutid

  Of a, b

  WHERE a.girlscoutid = b.girlscoutid

  AND the term NOT AS "4Q_";

  Hello

  So, all the information that you want to see figure in table b, but if you want to see it depends on the table has.

  This looks like a job for a semi Join.  Here's a way to do it:

  SELECT b.fname

  b.lname

  b.girlscoutid

  B

  LEFT OUTER JOIN has IT a.girlscoutid = b.girlscoutid

  AND a.quarter NOT AS "4Q_" - or a.TERM, if it is the column

  WHERE a.girscoutid IS NULL

  ;

  What you posted was an INNER join, where the rows of each table are included in the only game that if they have a corresponding row in the other table.

  An OUTER join includes all the rows in a table (table b in this case) if they have a match in the other table.  If a line of b has no corresponding row in a, then all the columns that are supposed to come from table will be NULL in the result set.  Given that the join condition includes = b.girlscoutid a.girlscoutid, this means that the only way to a.girlscoutid can be NULL in the result set is if the b line is included although it has no corresponding line one, which are exactly the lines that we want to display.  (You can try to run the query above with the WHERE clause, deleted, just to see how it works.)

  Alternatively, you can get the desired results by using a subquery NOT EXISTS, a NOT IN subquery or analytical functions.  The semi join, supra, is probably the most effective solution.

• How to combine video and audio in avi file

  I acquire my 1394 camera video image and acquire sound of my computer microphone, which is good and done separately.

  But I need to combine these two files (audio-> wav, video-> avi) in a single avi file in the run-time, which I play the avi file with the sound with other players, like: windows media player.

  Could someone give me some hint please? I asked the support of NEITHER, but they cannot give me a good solution.

  I found some companies sold the plugin, but I think that this is not my option.

  Try this place.  Download (direct link) was working when I checked.

• How to combine separate and administrator connection Standard in a single entity for single user

  I'm the only user on my PC, but I always use a password to connect.  When I had Windows XP I had, but a sign as administrator and Standard user handset and all was fine. Then all in a PC technician who boasted of how he is, has completed the installation of Windows 7 and removed or literally lost everything on my computer! The explanation of the latter being superfluous to my question, but "phew!" it's good in passing as I am I am always overwhelmed by the traumatic loss.

  The sign of WIN7 was somehow Setup with a separate standard and administrator connections.  Therefore, whenever I chose to activate some administrative functions, I have to connect to the account administrator, etc. I want what I had always used and liked, a sign was my name as two entities. I know it's possible, I don't know how to do in this regard. I wonder if I just delete both (if possible) and create again? It is obvious that I am confused as to why the game 'tech', with both sign in the when I am the only user. Thanks in advance!

  LadyRJB

  Why not just log in as the admin and forget the standard user.  By default, administrators have all permissions of a standard user & all the permissions of an administrator.

  In fact, you CAN remove the user std.

  I suspect you ask something different but not sure about that.

• How to download and install ADE on my computer?

  I can't find a link to the Adobe Digital Editions software on the Adobe website, how can I download and install ADE? Adivse me please.

  I think that Adobe has a problem with his site as any in any language of ADE is redirected to Adobe InDesign.

• How to combine the insert and where to ask?

  Hello..
  
  could someone guide me how to combine insert and where to ask questions?
  
  insert into tdc_imarspc (ANUMBER, EMF_ID, PRODUCT) values ('1234567', '65', ' ITF')
  where anumber not as "1234567".
  
  Thank you
  Balleur

  Hi, ballet,

  As Manu said, WHERE only works on a query.
  You can base a query relative to the double, like this:

  INSERT INTO
  tdc_imarspc (ANUMBER,     EMF_ID,     PRODUCT)
  SELECT          '1234567',     '65',     'ITFS'
  FROM         dual
  WHERE          anumber      NOT LIKE '1234567';
  

  Of course, you can use a literal, such as "1234567" in both places where I used the variable binding, but if you do not use a variable, why would you?
  You could also put all the literals in a subquery (duplicate), and column names of reference in the WHERE clause LIKE THIS:

  INSERT INTO
  tdc_imarspc (     ANUMBER,     EMF_ID,          PRODUCT)
  WITH     sub_q
  AS  (
      SELECT    '1234567' AS an,     '65' AS ei,     'ITFS' AS pr
      FROM      dual
      )
  SELECT          an,          ei,          pr
  FROM     sub_q
  WHERE      an      NOT LIKE '1234567';
  

  I guess that you don't really say

  an      NOT LIKE '1234567'
  

  If you use any ambiguity after LIKE, you may as well use! =

  an      != '1234567'
  

• table and the column in the chain

  Hello
  I'll have a column data containing the combination table and the names of columns as
  
  act_hand_table.work_order
  I want the names of table and column separated
  I want to separte. Classified
  
  Please help me
  Kind regards
  Kiran

  I think it'll work

  SELECT
  SUBSTR (COL1, 1, INSTR(COL1,'.',1,1)-1) TABLENAME.
  SUBSTR (COL1, INSTR(COL1,'.',1,1) + 1) COLUMNNAME
  FROM TABLENAME

• How to combine two tables: table of origin and its values of interpolation table

  We get a new array of values after using the interpolation on a table function in labview, but how to combine the array of values and this original interpolated set of values in a single table?

  
  

• I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  To do that you will need to change the varibles PID values and then use the sliders to add numbers to a latch for variables that point.

  This is how I think it works in Version 8.

  In all cases, you should move on to 12 more stable summer.

  In addition, unless that is a very slow process, I generally do not like closed loop PID with DASYLab due to the fact that computers is not reliable with timing.

• How to combine the 2 tables in sql server 2008?

  Tell me how to combine 2 tables in sql server. and give me an example, I am a beginner again.

  You can get a faster or better response if you ask one of the instances of SQL Server dedicated from Microsoft here:

  http://social.technet.microsoft.com/Forums/en-us/category/sqlserver .

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• How to combine several libraries in a library complete?  And this new global all0 library can be an external hard drive?

  How to combine several libraries in a library complete?  And this new global all0 library can be an external hard drive?

  1. click here for more information.

  2. Yes, if this disk contains a partition image or the drive Mac OS Extended format.

  (142356)

• How to write a table and a scalar value in file?

  I would like to write my data in a file but cannot address the problem. In the file I would write are values of x and y of my points of data in two columns, however, the data is in a table and the data of x consists of 3 pieces of information: an initial x, x incremented value and the number of points in my sample of data. How would I go about this?

  The number of points is redundant, because it will be the same as the 'other' in the table.

  Here's what I usually do:

  

• How can I read items in four tables and store them in variables?

  Greetings,

  I have 4 tables which I read to control an autonomous robot vehicle as instructions.

  I must be able to read the first elements of each table and store in separate variables 4 (direction, speed, angle, distance). Wait until the first statement has been executed. Then I move on to the second elements of each array. I'll repeat this until I went through all the elements. I am struggling to figure out how to do this?

  Please note:

  -The number of items in the tables is always the same, although the number of items varies as can be less instructions or more.

  For example, a full trial takes 1st element of table 1, table 2, table 3 and table 4 and it builds something like: forward, 10, 20, to the left. This will then be the robot moving forward at a speed of 10 over a distance of 20 and then turn left. Once this done then it contains the elements 2 and so on.

  Please find attached my VI that reads a text file and creates 4 berries.

  Thank you.

  stanm13 wrote: Unfortunately, I don't think you understood my question.

  Then, I would say a) you don't understand the answer or b) you explain well enough.

  To make each element of an array, using a loop FOR with autoindexing entered is the way to go.