How to communicate between the host and the guest in a stand-alone PC

Similar Questions

• How can I remove the persistent database on stand-alone simulators?

  I use stand-alone device simulators (not of JDE or Eclipse according to) to test an application on multiple platforms. In order to do some tests first-time behavior, I need to blowing the persistent data store before each new installation. In the JDE-based simulators, there is a clean.bat which does just that. However, for these simulators autonomous, that I can't find anything like that under the folder, they were installed in. I tried to reset, and I tried to uninstall and reinstall the Simulator itself, and yet the data is * really * persistent - won't go away. Of course it's stored somewhere else.

  Does anyone know how to remove all data on these stand-alone simulators?

  I use Windows Vista, 4.2.1\4.2.1.96...7130-Cingular ...\Research in Motion\BlackBerry device simulators Simulator.

  Thank you

  Jay

  Vista virtualizes the app directory in "Program Files" when an application tries to write.

  You can find the files in your Users in AppData directory.

  Click on the C: drive in Explorer, and then look for *.dmp.

  It's probably something like c:\Users\jaybb\AppData\Local\VirtualStore\Program Files\...etc...

• How to communicate with the gsm using lab view

  Please, someone tell me about the following uncertainties:

  1 can anyone tell me about the GSM part in lab mode?

  2. how to communicate with the GSM using lab view?

  3. how to publish my data through GSM using lab view?

  4. how to use ipod to send data to laboratory?

  5. what a DAC suitable for ipod?

  6. how to install the lab for ipod DAC mode?

  without worrying

  FR. mohammad rehan

  rehan_the_great wrote:

  Can u please tell me the minimum requirement of computer (labtop) for the use of labview, like ram size, HARD drive, map chart etc...

  A simple search for "labview requirements" on this site would have given you the information you want.

  http://www.NI.com/LabVIEW/requirements/

• How to communicate between different applications on 1 Server?

  As the title says: how to communicate between different applications on 1 Server?

  I'm new to FMS and I am trying to build a program that I need to have a communication between 2 or more applications on the same server.

  How to do this?

  There are several ways to do so.

  1. the favorite for me is make a NetConnection instance of an application to another and make calls between the two using .call NC on one side and client.call interface on the other side

  2. you can use the objects proxy shared to affect this change even

  3 build your own interface for that use the remote features

  Just some thoughts.

  ASA

• Communicate between extension html and c ++ plugin

  Hi all

  I'm developing an extension html for InDesign CC2014. There is a scenario where I need to communicate between the extension and the C++ InDesign plugin.

  I followed the instructions at http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/cs-extension-builder/pdfs/CC_Extens ion_SDK.pdf and wrote on the extension of the code part. The part c ++ code has not changed since the Flex versions, so no problems there.

  I tried to call the extension of the plugin and it worked. I recorded an event in the plugin to listen to and sent another event of the plugin. But the Committee does not seem to listen to or distribute any type of event. On the part c ++ plugin, the error of registration codes and send returned were codes of success, so the problem is not with the plugin.

  Here's the code for the html Panel,

  I save the event to listen to at the time of the loading of the page.

  function onLoaded() {
      var csInterface = new CSInterface();
  
   // Register the named event handler
    csInterface.addEventListener("com.mypluginevent.test", myEventHandler); 
  
  }
  //Create a named event handler callback function
  function myEventHandler(event)
  {
    alert("Event captured!");
  }
  
  // This function is called on a button click
  function onClick()
  {
    // Create your local CSInterface instance
    var csInterface = new CSInterface();
    var event = new CSEvent("com.myhtmlevent.test", "APPLICATION"); 
  
    event.data = "This is a test!";
    csInterface.dispatchEvent(event);
  }
  

  Here's the part C++ code where I send the event "com.mypluginevent.test".

  csxs::event::Event event = {"com.mypluginevent.test",
                                csxs::event::kEventScopeApplication,
                                "myEventHandler",
                                NULL,
                                NULL};
  
  csxs::event::EventErrorCode err = sdkPlugPlugInstance.DispatchEvent(&event);
  

  I always get a hit on the dispatch of the event, but the extension intercepts her.

  Can someone tell what I am doing wrong?

  Hello

  I don't know if it will help but take a look at the documentation for CC 2014 (rather than the CC 2013 docs you use): official Adobe Extension SDK Documentation for 2014 CChttp://adobe.ly/1rin38t>

  Best regards

  Hallgrimur

  --

  René Hallgrímur | Product Manager Adobe EAC | @HallgrimurTh

• How to run code and to communicate between the computer and myRIO?

  Hello

  I am trying to create a colortracker using the myRIO. The system is pan tilt servo with a webcam. The project works well and is able to follow and move with the desired color. However, in order to continue the project, I want to ensure the system with another device for the perception of depth and want to use the host computer for webcam and image processing and the myrio to get signals for the servos. The idea is to connect two webcams directly to the computer usb ports and keep the myRIO connected to everything does time i.e. no wifi. Can anyone guide me as to how I would go about sending signals constantly between the computer host and myRIO?

  I advise to use Variables shared Network-Published or network stream.

  You can read about them both in the cRIO guide Developer: http://www.ni.com/pdf/products/us/fullcriodevguide.pdf

  There are also examples for both in the Finder for example LabVIEW.

• How to share between the host drive and the virtual machine in the car?

  I wanted to use my virtual XP to print using my old printer that the printer driver can only support XP. But I can't find a way to link my host and the virtual drive, because my file is located in the host drive.

  1 change the settings of the virtual machine

  2. go to the Options tab

  3. Select shared folders

  4. Select always enabled

  5 Add the folder that you want to use

  6. Select map as a network drive in Windows prompt

  

  If you find this information useful, please give points to "correct" or "useful".

• How to switch between 0 v and 5 v using the FTDI USB-to-TTL converter?

  I have one of these (TTL-232R-5V-WE) FTDI (http://www.ftdichip.com/Products/Cables/USBTTLSerial.htm) and it came with a few screws to control the USB converter.

  However, I do not know how to exit (between Vcc and Gnd) 5V to 0V.

  Basically, what I need is alternation since the converter FTDI TTL signal output.

  Any help please? Thank you in advance.

  Hi sclow,

  the link provided, you will find data sheets with all the necessary information. This device implements a COM port that is usual with just TTL level signals. The SCR will always provide + 5V with no opption put. But we can use the CTS/RTS signals! Just look at the description of the node property VISA-> settings-> modem line parameters series...

• VMWare Player 6 - copy / paste doesn't work is not between the guest and host

  Hi all

  I am unable to cut and paste (text) or drag-and - drop (files) between the client and host and vice versa.

  I am running Windows 7 (32-bit) guest on a host Windows 8.1 (64-bit).

  Everything else works to date works and VMWare Tools are installed.

  I spent a few hours searching and have not been able to determine if this is a known issue or just a mismatch in my environment/configuration.

  Any suggestions or comments would be most welcome.

  Kind regards

  Hoops

  Hi all

  Seems I solved the problem.  It comes down to User Account Control (UAC) prompt (in my case Windows 7 (32 bit).  I have disabled UAC in the comments and drag and drop / cut and paste now works like a charm.

  Autologin also now works. I had not tried to set up that more early.  That's where I read an article to disable UAC for AutoLogin work.

  My VMWare tools icon now displays in the system tray.

  I hope this helps someone else out there!

  Thank you...

  Hoops

• Not able to communicate between the VLANS on SG300-10

  Please take a look at my crude drawing of how I want my network to work:

  SG300-10
  __________________________________________
  | 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
  |_|___|__________________________________|
  |   |_________________________________
  |_________________                   |
  __________________  _______|_________  _______|_________
  |-VLAN 1-|  | - VLAN 10-|  | - VLAN 20-|
  |   Management |  | 192.168.10.1 |  | 192.168.20.1.
  | 192.168.1.250 |  |               |  |               |
  |________________|  | Internet router |  |   Devices.
  | 192.168.10.2.  | Box of physics |
  |_______________|  | 192.168.20.2 |
  | Server 2008R2.
  | DNS, DHCP, AD DC |
  |               |
  | Physical boxes |
  | 192.168.20.x |
  | W7 Workstations |
  |_______________|

  I put a static IP address on the server 2008R2 host and Internet router.  I have configured my VLAN and I put each VLAN IP (as shown above), I put a 0.0.0.0 route to the Internet router, but also routes for each range of IP VLAN x.x.x.0 and I put the gateway on all host on VLAN 20 to be 192.168.20.1.

  I'm unable to access the Internet, ping the router or access the webpage switch management of any host on VLAN 20 unless I manually set the IP address on the host VLAN 20 on the same IP range as the machine I'm trying to get. As such:

  If I manually set the IP host address to 192.168.1.50, I can access the administration of the switch, but then not RDP in or ping any host on VLAN 20 or ping the router Internet on VLAN 10.

  If I manually set the IP host address to 192.168.10.50, I can ping the router Internet but cannot RDP into or ping any device on VLAN 20, nor can I access the Switch Management page.

  If I let DHCP assign the IP 192.168.20.5, I can RDP in and ping all devices VLAN 20, but I can't ping all devices on VLAN 10 or access the administration of the switch to VLAN 1.

  I know I'm missing something simple, and I worked on it for about 30 hours now but can't seem to get this to work. Someone could possibly help?  Thanks in advance.

  Just to be sure, is the SG300 mode switching L3 / L2 switching?

• How to communicate between ExtendScript and basic generator

  I run a separate node server as described in this tutorial to create a plugin with generator-core. http://tomkrcha.com/?p=3896

  I'm in a situation where I need to send a lot of JS to photoshop via generator.evaluateJSXString (). But it can easily become uncontrollable that you can send a string. So, for any complicated feature, it becomes difficult to maintain. Is it possible set a bunch of functions in a script to measure file and then call these functions from the application node?

  So I could send:

  generator.evaluateJSXString ('doSomeStuff ()');

  And in a script somewhere (I don't know where this script should go)

  I have the defined function that can do something

  function doSomeStuff() {}

  for (var i = 0; i < 10; i ++) {}

  doc.artLayers.add ();

  }

  }

  Where the Script to extend file would in this case? OR is there a better way to make this kind of thing.

  Just a mixed collection of thoughts:

  • Yes, you can package scripts in the form of .jsx files (also jsxbin if you prefer not to share the source) and run with generator.evaluateJSXFile (path), which will work even in ESTK. It has some limitations
    • It is just a file that runs, that is not this function 'call '. I managed this by dividing my Javascript libraries and plugins (= this a function). Can I use Gulp to concatenate libraries necessary for each plugin to create scripts of jsx 20 + that I call the two panels of node & Photoshop
    • There is no parameter passing, but it can be overcome by the presence of a script (that you run a string) parameter store (or fetch result) to Photoshop as a descriptor of persistent custom action
  • The plugin folder where your main.js is accessible by Node.js variable '__dirname '.
  • Depending on how you use paths, you should consider Windows "------" vs. Mac ' / '.
  • Another good way of communication between the panels of Photoshop and the node is a Web server in the configuration node and use Ajax/jQuery in Panel of Photoshop. You can do ~ 500ms update on election and get feedback from Panel pretty real time.

• How can you change the guest operating system on a host after 4.0 set to level.

  On ESXi 3.5 U4 all FreeBSD guests were built with "Other Linux (32 bit)".  How can I change them to FreeBSD (32 bit) now that I've upgraded to 4.0?  I stop the host and I tried to change it but it does not give me the option to FreeBSD.

  The virtual machine must be turned off before upgrade you your virtual hardware. If you click on a turned off the virtual computer, you will have an option that says upgrade virtual hardware

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• How to choose between the hours in the field Date IR with the functionality of the search bar?

  Hello
  
  I have an IR with a Date field (point) and when you use the features of the default IR search bar, it is possible to search for dates between 2 dates (date time), but I can't find a way to be able to allow the user to search between the hours of the date (s). I am interested in using the operator betwenn as I would like to provide to the user the possibility to choose for a period of time in the dates.
  
  How can I get this feature?
  
  TIA

  Hello

  Change the Date Format of application at: HH24:MI:SS JJ/MM/AAAA

  Sorry - I actually had this setting in my application (which is not often the case!)

  Andy

• How do you keep the guests on their hosts (no migration) by making the food stops.

  I apologize in advance for the length of this post.

  In general do not much poster, but a lot of reading.  First of all, let me tell you that I'm not a GURU PowerCLI, never written one in my life, but there is always a first time.

  Background:

  Under VMWare 4.1, that us did not run with HA, for whatever the reason why I don't know.  We had (our UPS manufacturer) Liebert software called MultiLink that when there was a power outage after 15 minutes would run a .bat file on the server vCenter for windows that would log on to the vmware host and run a file .sh that accumulate all the machines on the host and start making judgments on them.  Once completed the host itself would make a stop.

  Currently:

  Improved 5.5 VMWare vCenter, have HA and followed now host active in the configuration. We find that we can follow is no longer the practice that we have done less than 4.1.

  I got a new version 4.2.4 and that it contains, there is provision in interface with VMWare through the PowerCLI and it stops all guests on the host computer. The host then stops.

  I suspect STRONGLY that when the command is issued to stop the host itself, HA or monitoring kick and migrates customers and/or models out of the machine, before the machine shutsdown.  In the first tests, I had a host with 5 models, 1 windows machine and a Virtual Appliance on it.  Everything was arrested, as was that it was supposed to, but the host was brought back to the top he had nothing on it.  Models and machines had been moved (spread) for the two other machines.

  This has been confirmed in another test on 01/05/2015 through vCenter client connection, the guests have been stop, the by refreshing the screen you could see the machines leave the test machine, then the server itself, stop.  In a subsequent test, I commented on the "Shutdown the ESX hosts" part and the machine down and remained where they were.  So I'm guessing that it has something to do with HA, surveillance or other thing that needs to be defined differently for him to stop guests from the host, stop the host, BUT not to migrate comments to others running machines.  Do I need to enter the maintenance or standby mode before making the shutdown command?

  Any help would be greatly appreciated.

  You can avoid the confirmation prompt by adding the -confirm: $false pass.

  What follows will check all clusters and those where the priority of restarting is not disabled, is set to disabled.

  Get-Cluster |

  where {'ClusterRestartPriority', 'High', 'Medium', 'Low' - contains $_.} HARestartPriority} |

  HARestartPriority-set off Cluster - confirm: $false

  In this way, HA will continue to function (for ESXi other nodes in the cluster), but virtual machines will remain on the crux of ESXi, you stop.

• How to communicate between instances of Labview application?

  Hello, I have a question on how to communicate data between two instances of labview application on different computers connected via a network.

  I'll explain what I'm doing:

  I have a data acquisition program that was divided into two independent parts. The backend is responisible for the acquisition of data from several DAQ hardware, and the interface simply displays the data collected. The two parties are coupled by events in labview. The backend sends a new event data (for any one listening) whenever he gets new data and the frontend listens to these events and updates of some graphics on the front panel each time it receives this event. Other than the two parties have no communication.

  Now it is necessary to split the frontend and backend on two different computers, connected via a network. The backend will be connected to DAQ devices as usual, but the frontend is running on another computer.

  So my questions are: will be the my current communication mechanism still work on multiple instances of labview application? And if not, what is the best way to connect the two in a minimum amount of new code, and without interrupting the current program, if I decided to their port of return on the same computer?

  (I thought that a kind of middle-man would be the best who is responsible for networking).

  Please, any advice will be useful!

  Paul.

  I think that the best way to do this is a TCP/IP link.  You can do it, as you suggested, with a pair of 'intermediate' screw at one end, catch you user events in a VI and send them over the network; on the other end, you receive data and turn it into an event, requiring minimal changes to the rest of your code.  The TCP/IP screws are pretty easy to use and there are good examples of LabVIEW.  NEITHER offers the Simple e-mail reference library.  You can also watch "robust TCP' Jack Hamilton of LabUseful.com (WARNING: I've never used or not even watched these screws and cannot check they are really helpful, I have seen discussion and links to them).