How to compare the different timestamps and check that one is greater.

Similar Questions

• One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is in Chrome and do not hap

  One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is chrome and does not happen in Firefox. Any suggestions?

  Thank you Brad, my ankles were lined up however they were in the Center. I am proposing to-100 and it solved the problem. Thanks for your help.

• LR 4.2 - How to compare the evidence master and soft copy?

  Hi all

  I would like to use the audit function in LR 4.2 to preview the print output and I would use it to apply corrections to the images before they are printed, in order looks like I meant originally look like them, but I'm having problems, possibly caused by the workflow used (I'm not a pro, but my environment is calibrated correctly).

  My workflow is:

  1. I have import all photos and apply some changes so that the photos look like I want them to be (it's the master)

  2. as I want to print them, I use the audit function and load the target profile with which I create a copy of fresh evidence. Sometimes, I noticed that the differences between master and soft copy of evidence are quite dramatic, especially regarding the contrast, color and sometimes about the brightness brightness.

  3. my goal now is to adapt the image video evidence so that it looks like the control (as I wanted the photo to look like), but I can't find a good way to do it, because:

  -I can't find a (semi-) automated in order to adapt to the soft proof copy so that it "looks like" the master copy

  -in the develop module, I can't find a way to display the master foto both the soft proof copy in addition to each other to compare, to apply the changes to the copy of fresh evidence only so that it 'looks' like the master.

  The only way I have found so far is to move bewteen back copy of master and soft proof to compare (to be able to apply the necessary changes to the copy of soft proof), but it's quite painful, as the photos do not load immediately, but there are always a few seconds and I have to 'remember' how the captain looks like.

  I don't know if I'm doing something terribly wrong, but unfortunately I have not found answers to this question so far, that's why I write here.

  Hope you can point me to a solution,

  Kind regards

  Plasma2k

  Never activate with your choice of output profile (this can include checking a web output colourspace as sRGB).

  Press on Y to show a split before and after the point of view (if your toolbar is not open, press T to open - this gives different kinds of split view options).

  You will now see a comparison on appearances soundproof and sound-proof of this image.

  If you develop all the adaptation of this mode, for example to make these two more similar appearances, you are prompted to create a copy (virtual) checking if necessary - that can store these corrective adjustments regardless the main adjustments.

  The before and after view then goes to see a comparison between your image (shown without ever) start against your explosion-proof version fitted print (shown with never).

• How to: open the control panel and check if Windows Update settings in Windows 8

  If you're running Windows 8 and you are not sure if you get the latest updates and patches Windows updates then the following video should help. It guides you through opening the control panel and how to check your Windows Update settings.

  Remember, make sure that Windows 8 is up-to-date on your computer, you must have the latest updates of Windows installed.

  You may also need to make sure that your computer is updated the software and drivers for your hardware or to trobleshooting purposes make sure it isn't updated drivers for your hardware. Here is a video that will show you how.

  I hope everyone finds these helpful videos. If you have any questions leave a message below. Remember, it is advisable to have the active Windows updates, however, there are certain circumstances (for example, troubleshooting) disable it temporarily is a good idea.

• LR CC: How can you add labels 'ABC' to multiple slides and how to apply the different transition and pan / zoom to select slides?

  I want to add different labels to most of the slides.  The 'ABC' option adds the same label to all slides with includes date shot and camera settings that I don't want.   I also want to control the slides have pan / zoom.  Seems to be something pretty basic that I'm missing?

  1. by clicking on [ABC] creates the text box.  By clicking on the menu dropdown determines what appears in the box.

  (and you can create multiple text boxes with different information!)

  "Custom text" will appear the same on each slide. The other choice pull metadata each individual slide - "Filename", "Caption", etc.

  The dialog box "Edit...". "you can create a combination of metadata to display in a box.

  In the dialog box "Edit...". "Alternatively, you can create something like this, where the text {Custom} is the same before the {file name}... etc.

  

  

   

  2 pan/Zoom is a feature very poor slide show-it is fixed and will apply to all slides without any possibility of control. Better to leave off...

• How to compare the 2 versions of the same document in Pages?

  How to compare the 2 versions of the same document on Pages?

  There is no OS X Visual tool which can open two Pages document and show the differences between them - other than the human eye.

  What information are you interested in identify as different between the two documents? What specific version of Pages?

• How to retrieve the network icons and the taskbar sound? They disappeared

  original title: extraction and network icons

  How to retrieve the network icons and the taskbar sound?  They disappear from the notification area of the taskbar.

  Hello

  There are different ways to fix it

  read all the information on the link below

  Try Method 1 or 3

  Method 1. :

  1. right click on the taskbar and click Properties.

  2 tab Area of Notification .

  3 check the (on) or disable (off) the options you want or do not want to display on the Taskbar Notification area

  Method of reading 3 etc. in the link below

  How to enable or disable the Notification area system icons in Vista

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

• How to avoid the glossy look and brilliant nostrils?

  I just built my first character of fuse and when I import into Photoshop, its nostrils are incandescent - as if the light shines through the back of his head!

  This fuse:

  

  Becomes this in Photoshop:

  

  I use a brush to set the nostrils, but have no idea how fix eye - of the suggestions?

  Even better - any ideas on how to avoid the glossy look and glowing nostrils?

  Thank you very much
  Malcolm

  Hey, Malcolm.

  Best way to explain what basically rendering 3D correctly really takes a lot of time, haha.  So that you may be able to work with the real-time 3D model and make changes quickly, we use two different rendering methods.

  There is an "Interactive" mode which is not like the beautiful light/shade, but is very fast - and that's what you see when you interact with the default template.

  Then, there is a mode "Raytraced" which is much more advanced calculations and stuff to give you a proper lighting / shadow.  Raytraced rendered may take time if so we can not use it all the time.

  In order to get the lights/shadows appropriate you need to perform a path Ray would make on the document.  Best way to do this:

  • Select your 3D layer in the layers panel
  • Make a selection in the drawing area to the area that you want to make (I recommend to test rendering of area to check the lighting/shadows before committing to make the whole layer).
  • Push the button is rendered at the bottom of the properties panel (it looks like a cube in a rectangle box, right next to the delete icon).

  There are other things that you must do if you want to get the best image search quality such as the addition of secondary lights!  You can add more lights in the 3D Panel using the small icon of light at the bottom.  Have 2-3 stage lights and adjusting their colors can make a big difference with the Assembly of your character in the scene.  Here is a small image for some comparisons:

  

  You can see the image with two lights a look much more realistic lighting and shadows and raytraced of one and two versions are much nicer and cleaner!

  Hope that helps!

• How to prevent the add-on compatibility checking whenever he opens Firefox?

  How to prevent the add-on compatibility checking whenever he opens Firefox?

  Which can be a problem with the compatibility.ini file in the Firefox profile folder.
  Try to rename (or delete) the file compatibility.ini in the profile folder of Firefox to see if that helps.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Alternatively, you can check for problems with preferences.

  Delete possible user.js and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

• How to include the install date and time in the registry keys

  Hi all

  I hope someone can help me. I'm creating a Setup program that includes properties in the construction specifications. I also wannt to include certain registry keys to add during installation:

  1. I understand the application installation directory by providing the key to [INSTALLDIR] value. This seems to work fine and I have no problem with that.

  2. the other key I would include (but I don't know how) indicates the date and the time of installation. Is it possible to automatically include this in a (similar to INSTALLDIR) registry key?

  I look forward to your expert advice!

  Kind regards

  Larry

  Larry,

  You can configure an exe must be run after Setup is finished. So, you can write a small application using the registry functions of Windows that retrieves the current timestamp and store it in some key.

  Norbert

• How to reformat the hard drive and do a "clean" install

  A recent virus attack, my computer has lost some files of the operating system.  With the help of the Lim has provided the recovery disk, which offered ' upgrade/repair' or a 'new installation '.  I chose ' install new ', actually I found many of my files are still there - that means that if a virus has escaped "Detection / removal" will always be there.

  Question: How to reformat the hard drive and do a 'fresh install' on a clean hard disk "? ". (I have a drive to Win XP with service pack 3 and a driver disk for the hardware installed on my computer of the regulations.)

  Thanks in advance

  Skip

  Since you have a Dell and a recovery CD and not a recovery Partition, check how many partitions you need by using disk management:

  http://www.theeldergeek.com/disk_management.htm

  In case you have a partition with the operating system and a partition of the utility partition, I would only recommend formatting the partition from the OS. The Partition utility can be very useful.

• How to move the hard drive to external hard drive backup and how to make the backup automatically and regularly

  Original title: EVOLUTION of BACKUP

  I SAVED IT ON THE HARD DRIVE TO PUT IN PLACE TO ENSURE THE GUARD. NOW, I HAVE A LIL BOX IS AN EXTERNAL HARD DRIVE, I GUESS. I GOT IT FOR THE MEMORY, LIKE A BIG THUMB. SAYS ITS NEED F HOW TO BACKUP IT (MY LAPTOP) THIS AUTOMATICALLY AND REGULARLY. HELP PLEASE, THANK YOU?

  Hello

  You can try the following methods and check if it helps.

  Method 1: Change where you back up your files
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-where-you-back-up-your-files

  Method 2: Set up or change automatic backup settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

  Reference:
  Back up and restore: frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/Back-up-and-restore-frequently-asked-questions

  Backup your files: http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  

• How to change the white text and more light colours of text and illustrations to deep colors or provide a deeper black outline, so that they are legible?

  I noticed that the illustrations and white text are not readable as well as light colored fonts that I use. I have consulted with Microsoft and other help sections various areas recommended, but impossible to find what is the problem and how to solve these problems. In order to clarify, for example, if I go on a site that displays white text anywhere on the screen, or illustrations in white, I can't read or see anything even if I do expand. I tried to innovate in following things suggested in onlne Microsoft Help related to the resolution section, but can't find anything on this specific problem when I do a search. I tried to change my display resolution settings, change the background color of my screen, themes and even the font colors, but nothing changes for the problem. I also noticed that any file in my computer appearing in any color of light is also hard to read. I must not do something correctly, but I don't know what. It's a pain for example, when I go to a site, and the white text and illustrations appear, but do not have any black outlining. Magnification just leads to the same result. Can anyone identify which is the problem, the settings on which I should be focusing and provide instructions on how to fix this?  I use Windows Vista Home Premium and I am a layman when it comes to computers.

  Hello

  You can check out the articles below and check if that helps:

  Make the text easier to read using ClearType

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-text-easier-to-read-using-ClearType

  ClearType: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/ClearType-frequently-asked-questions

  Make the text on the screen larger or smaller

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-text-on-your-screen-larger-or-smaller

  Hope this helps,

• How to display the language bar and bring back the language switch to the taskbar?

  How to display the language bar and bring back the language switch to the taskbar?

  How to display the language bar and bring back the language switch to the taskbar?

  Hello

  According to the description, I understand that you do not want to display the language bar.

  I would like to know some information.

  1. You hide the language bar, or missing?

  I suggest you try the steps mentioned below and check.

  1. Go to the control panel.

  2. Click on clock, language and region.

  3. Region and language.

  4. Keyboard and language tab.

  5. Change keyboards button.

  6. Language bar tab.

  Then simply change the parameters of language bar hidden in the "embedded in the taskbar" and check.

  Here, you can also check the option in the check box for display icons of language in addition to the taskbar bar.

   

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• How to get the battery level and status in the cpp file?

  Hi all

  BatteryInfo class so I can I know how to get the battery level and the State in .cpp class?

  Hi Benecore,

  I have Add method below,

  #include

  But I only variable BatteryInfoPrivate not get variable BatteryInfo. You can also check on your side.

  So let me know how to get batteryInfo instance?