How to configure IKE with RSA without this Protocol between 1760 and PIX501?

Similar Questions

• How to print an e-mail without printing the side panels and the folder list?

  Original title: print an e-mail

  How to print an e-mail without printing the side panels and the folder list?  It also prints a part of the message that the sides take up much space

  IF you use Outlook.com you print this way...

  1. go to your Inbox

  2. Select the desired message you want to print

  3. in the top of the message itself, you can see options like New, Delete, Junk, response, etc..
  Please select the three dots (...) next to categories

  4. click on print

  5. a preview of the message is displayed and also printing options.
  (Don't forget to click on "all pages" for multi page emails.)

  6. click on print.

  

• How to configure automation with Apple TV, Homekit and Hue

  I have what I believe should be a viable home automation installation: a new brand (4th generation, Sept. 16) Apple TV, a hub of hue with the support of Homekit and seven lights attached via the hub.  The lights appear in the home iPad app and can be enabled or disabled here.  I can also do things with Siri on the Apple TV as "turn one room family", and have the appropriate lights.  Thus, it seems that everything works.

  BUT: when I go to the tab "Automation" in the app iPad Home, all I get is a page telling me that I should get an Apple TV to put in place of the automated activities - there is no way to actually DO something.  Am I missing something obvious?  I do this also?  Don't forget that I can control the lights in the House on the iPad, so they certainly know each other...  Thank you!

  Howdy Jim

  Looks like you are unable to configure Automation with your Apple TV. I would check that you have everything set up correctly with the steps described in this article:

  Automate and remotely to your accessories HomeKit

  If everything looks OK, then use the section 'Get help with your home hub' down. Thank you for using communities of Apple Support.

• How can configure auronomous with WPA2 pre-shared key access point

  I worked with the 4400 WLC series and set up access points aironet 1140, and all work without any problems.but when I tried to configure the autonomous access point I couldn't configure the AP with WPA or WPA2 preshared key and I could configure it with WEP, I want to help here.

  Wi - Fi Protected Access 2 (WPA 2) Configuration example
  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml

  Please rate when useful or appropriate.

• How can fill us with data in this table AR_RECEIVABLE_APPLICATIONS_ALL

  Hi all
  
  How can fill us the data in this table, I created a credit memo and marked it complete but I'm still not able to get the data in this table.
  
  What is the correct approach or any other alternative available.
  
  Thank you
  Ajay

  Hello.

  Ok. In the Menu, choose Actions and Applications.

  Octavio

• Create hyperlinks with script, without increase of large size and treatment of the BP reqs resulting?

  Quick Summary: I have a script as part of a process involving a lengthy document of data merge base that creates hyperlinks by using doc.hyperlinkURLDestinations.add (). The script is simply extracted from text into clickable hyperlinks.

  The problem is, the final PDF files that emerge from this process are 300% the size of a PDF file without the running script and are very slow to deal with. Most of that extra weight from an increase of 740 000% crazy (!) in the amount of data used for "info-Structure" (and that's after you run the version with hyperlinks through the Acrobat PDF Optimizer).

  The amount of the data structure in the PDF files with hyperlinks ends up being more than twice the size of the entire file PDF files without hyperlinks added. There is also a substantial increase in the size of the "the cross reference Table.

  This sharp increase in weight becomes a quick and simple process which takes a few minutes in a slow winding which takes hours, to the creation of files with a very slow pace inflated in a process that is prone to crashing and not.

  I hope for another way to create hyperlinks that adds all this weight.

  --------------------------------

  Details: Here is my current process. It works fine except step 2 causes the final size of the PDF file and the time required for the execution of other processes to increase massively. I know there are different ways to implement hyperlinks in a PDF document - I hope that there is a different approach, that I can use to step 2 which avoids this massive expansion.

  The goal is to create 600 2 PDF pages from an indesign template using the fusion of data, with each PDF with a file name that reflects reviews and live hyperlinks which vary from one record to the next. Here is my current process (for analysis comparative, the machine is a Mac Pro, Lion, CS6, with RAM 6gbs, and all files are on a disk HARD space, no transfer of data on all networks):

  1. Implement an INDD 2 pages with placeholders for merging data and spreadsheet.
  2. Create merged INDD, import hypertext links and other content as text, then run this script in InDesign that makes hyperlinks using live doc.hyperlinkURLDestinations.add ()
  3. Export a PDF to 1 200 PDF page - file > export if step 2 was made, or the merger of data tool if it wasn't.
     • Without step 2: the PDF file is about 110mbs and takes a few minutes to create.
     • Step 2: the PDF file is about 170mbs and takes over an hour and a half to create - I do not know exactly how long I ended up leaving running from one day to the next, but he had already run 1: 20 p.m. when I left and doesn't look close to finishing.
  4. Run this script in Acrobat to chop the PDF into segments of 2 pages with names based on worksheet data.
     • Without step 2: the process takes about quarter of an hour, slightly faster than a secondcreation of PDF files, and PDF files are 700kbs.
     • Step 2: the process crashes after about 10 PDF files and takes minutes to produce each one. Even if it did not freeze, it should be about 25 hours to do all of them.
     • In step 2 and then reducing the PDF to 45mbs through optimizer PDF Acrobat and 'save in reduced format' to cut, backward, compatibility, the process takes about 4 hours, producing a PDF every 20-30 seconds, and PDF files are around 3 MB each. Through to watch the process, almost all of the extra time taken comes from step "backup PDF... "for each of them.

  Each PDF 2 pages has 14 or 15 of the hyperlinks. I do not understand how the 14 and 15 of the hyperlinks can translate into an additional 2mbs of "" and something like the processing time of more than 3500% to create each PDF file.

  Can someone suggest modifications to the script in step three, which could avoid all this overhead? Here's the complete script for convenience:

  app.findGrepPreferences = app.changeGrepPreferences = null;
  var doc = app.activeDocument;
  app.findGrepPreferences.findWhat = '(http://.*$|https://.*$)';
  var objs = doc.findGrep();
   
  for (var i = 0; i < objs.length; i++) {
      var currTarget  = objs[i];
      var lnkDest = doc.hyperlinkURLDestinations.add(currTarget.texts[0].contents);
      var lnkSrc = doc.hyperlinkTextSources.add(currTarget);
      var lnk = doc.hyperlinks.add(lnkSrc, lnkDest);
  }
  alert('Processed '+objs.length+' hyperlinks');

  Edit - Here is a side-by-side comparison of the "Use of space Audit" tool optimizer based on CSSTidy Acrobat PDF, showing where the hyperlinks add volume. I scored two sharp increases in red...

  

  .. .so there is a massive increase going crazy in the size of the info "Structure", a tiny mbs 0.000238 to 1.76 MB - two and a half times the size of the original file, just on 'info Structure. It's a 740 000% increase...

  There is also a strong increase in fat in the cross reference table, 0,0046 mbs to 0.427 mbs - table of cross-references in the PDF with hyperlinks is more than half the size of the original file.

  The only differences between two files PDF's, we have 14 clickable hyperlinks attached to existing excerpts of the text (the "hyperlinks" are from a PDF file that comes with living aggressive optimization PDF and images are so much smaller).

  So it turns out the source of the problem was the document tags.

  Make sure that the PDF file is not created as a PDF by InDesign Tagged, and it behaves. I don't know what is it about hyperlinks and marking that makes it swell massively, but it does.

• How to configure the e-mail address of the form home and contact me form

  How to configure the e-mail address of the form at home and contact me form. I got two WARNING when exporting my muse as HTML file

  Muse will give the alert message if the e-mail address used is not on the same domain as hosting many platforms is not supports the emails from the external domain.

  You can check with your accommodation, where they take over other emails from field so it will not be a problem and you can ignore the warning message.

  Thank you

  Sanjit

• How to configure WIFI with WEP encryption?

  I have an Equium A50 and I am tring to set up on a network with a WEP code. I tried to connect to the network using the configfree software as it said but it still comes up with a fault on the configuration check tool. I tried the 4 networks of differnet computer to check the hardware and how it works on all of them. I'm stuck any ideas.

  Hello

  I put t know if you defined, but many routers support a hidden wireless LAN option.
  In this case, the wireless network is not visible. You should check the settings of your router.
  In addition if you want to use WEP encryption so you should go to the Wlan properties.
  You will find a wireless network tab. There you should find a wireless network of networks (if they are not hidden) you select the network and click Properties. There you should find an option to set the password for the encryption.

• How to configure MQ with WLS (MQ JMS vs Native MQ)

  Hi all
  
  SOA Suite = 11.1.1.3
  MQ Series = 6.0
  JDeveloper = 11.1.1.3
  
  I would like to read/write data in an MQ is configured on a physical machine differs from the Weblogic Server box. But the two systems are on the same network. I did some research on the forums for the MQ configuration steps, but finally got confused with the following questions in mind.
  
  1. What is the difference JMS MQ / MQ native? How to choose the one to use?
  2. If native MQ can be used here, what are the steps to configure MQ Native on WLS in my situation?
  3. should I all foreign servers or bridges of message should be configured?
  
  Please provide directions or pointers.
  
  Kind regards
  Neeraj Sehgal

  1. What is the difference JMS MQ / MQ native? How to choose the one to use?

  MQ native made reference to an api owner provided by IBM in several languages, including java so that applications that run on these can communicate mq. IBM also provides JMS wrappers around this api native, a jms client can talk to mq using the JMS API. It's called MQ JMS.

  2. If native MQ can be used here, what are the steps to configure MQ Native on WLS in my situation?

  SOA suite provides an MQ resource adapter that can be used to connect to MQ. The developers of this resource adapter would have used the native api to enable the adapter to talk to MQ, so that you don't have to worry about this. However, you will need configure the properties of your local MQ (qmgr, q name etc.). This is done in the properties of outgoing connection of the adapter resources pool.
  Please check this blog for how to do this: http://soa-bpel-esb.blogspot.com/2009/09/configuring-mq-in-11g-soa-suite.html.
  Because your MQ installation is on a remote computer, you must configure the following properties specific to your environment - hostname, port, server connection channel, as well as the name of the queue manager and the queue name

  3. should I all foreign servers or bridges of message should be configured?

  Not required for your case if you use an adapter of MQ. Because MQ also provides a JMS transport, you would have required foreign servers if you use JMS instead of MQ adapter adapter. MQ Native should be faster than MQ JMS because it doesn't have the extra layer of JMS.

• 4630-e how to configure scanner with no usb cable

  I have a HP printer 4630-e. I got it one day and can't seem to copy and print, but I am not able to scan. Can you tell me how to do this without USB cable please?

  Finally succeeded to operate by opening the icon of the printer first, by clicking on the scanner and in fact from the computer and the printer.

• How to install Photoshop with computer without a DVD drive?

  Any suggestions on how to recover my photoshop program and install on the new Mac?

  You can now download the installers for the Mac for CS3 to CS6 versions.  It is better to new facility as opposed to the copy of your Adobe installed from another Mac software.

  Download Creative Suite 6 applications   Links for previous CS apps are in the right pane. All you need is an internet connection and your serial numbers.

  Don't forget that your Adobe products are registered. This way if you lose documents with serial number, you always have online access to them.

  Gene

• How to configure Messages with Facebook Messenger on El Capitan?

  Hello!

  Recently I tried to connect my account FB-Messenger Messages on OS X, using a Jabber account, [email protected] and my password Facebook. But I can't seem to connect using this method.

  Any of you know how to connect two applications on El Capitan 10.11.2?

  Thank you!

  Hello

  It is more can be done.

  All ID of Facebook.chat were closed by Facebook.

  They removed the Jabber server that was used for the ID Facebook.chat and the engine of their messaging inside the Facebook login regularly.

  This means that the external Jabber ID and applications that can access the Jabber server that exist can discuss is more directly to Facebook users.

  

  21:10 Friday; January 8, 2016

   iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad

• How to configure firefox for deployment without group policy

  So my search resulted in my understanding there is no group policy for FF. I don't know FrontMotion Firefox, but I want to leave that as a last resort for now.

  I need to find a solution to add a location of CIP to the proxy but also to set the home page. I guess there is a preferences file in a location that I can modify and put all those who have the FF, but I was not able to find it.

  Can someone point me in the right direction?

  Thank you!

  Hi JHBPJF, you may refer to the following article to deploy a central settings for your firefox installations file: http://kb.mozillazine.org/Locking_preferences

• How to configure VPN remote access to use a specific Interface and the road

  I add a second external connection to an existing system on a 5510 ASA ASA V8.2 with 6.4 AMPS

  I added the new WAN using another interface (newwan).

  The intention is to bring more internet traffic on the new road/interface (newwan), but keep our existing VPN using the old interface (outside).

  I used the ASDM GUI to make changes and most of it works.

  That is to say. The default route goes via (newwan)

  Coming out of a VPN using a site to character the way previous (out) as they now have static routes to achieve this.

  The only problem is that remote incomming VPN access Anyconnect do not work.

  I put the default static route to use the new interface (newwan) and the default tunnel road be (outside), but that's the point is will not...

  I can either ping external IP address from an external location.

  It seems that the external interface doesn't send traffic to the - external interface (or at least that's where I think the problem lies). How can I force responses to remote VPN entering IPS unknown traffic to go back on the external interface?

  The only change I have to do to make it work again on the external interface is to make the default static route to use external interface. Calling all internet traffic to the (external connection) original

  Pointers appreciated.

  William

  William,

  As it is right now that you will not use the same interface you have road to terminate remote access unless you know their IP addresses by default.

  In one of the designs that I saw that we did something like that.

  (ISP cloud) - edge router - ASA.

  The edge router, you can make PAT within the interface for incoming traffic on port udp/500 and UDP/4500 (you may need to add exceptions to your L2L static) of the router. It's dirty, I would not say, it is recommended, but apparently it worked.

  On routers, this kind of situation is easily solved using VRF-lite with crypto.

  M.

• How to resolve problems with loading data not completely: empty pages and full with only listed infp left of page images.

  Some time to reload will fix. Recently it does not either.

  If you use extensions (Firefox/tools > Modules > Extensions) which can block content (e.g., Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that these extensions are not blocking content.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".