How to configure WEP on a WRT100 security re-
I'm visiting my aunt and her Linksys wasn't working properly, so I reset to factory default, and it's working now, except that now I can't seem to find the how-to page on how to set up WEP security again (or another variant of security... What is now suitable for a home router). Can someone sent me the url for instructions on how to do it? And is it crazy to try to do this without an ethernet cable connecting the laptop to the router? Thank you!
Whether you are able to implement security, it is imperative that you plug a cable from a computer to the router. But it's just temporary, unless you have finished all the settings. You can do wireless, but you will have to reconnect again and again to set up the page because you will be disconnected whenever you change a setting. Please see the link below:
Establishment of a security on a Linksys router wireless
Tags: Linksys Routers
Similar Questions
-
could someone tell me how to configure Security Center that I install the basics of security of microsoft and anti virus program installed sercurity interface of Green Center but in section proformance and monitor system health report in the warnings section, it says not installed or antivirus detected please someone help like it _ me off thx.soz.
It comes with Vista, upgrade install and activate Forum.
Microsoft Security Essentials questions should be directed to the MSE Forums:
http://social.answers.Microsoft.com/forums/en-us/msestart/threads
Installing and upgrading Microsoft Security Essentials program.
http://social.answers.Microsoft.com/forums/en-us/msescan/threads
Analysis, detection and removal of threats
http://social.answers.Microsoft.com/forums/en-us/mseupdate/threads
Update the definitions of spyware and viruses
See you soon.
Mick Murphy - Microsoft partner
-
How to configure a secure https payment page?
How to configure a secure https payment page?
Hello Gregfitzmiami,
This part is done on your hosting server. Please see the links below which explains more in this regard.
https://support.Microsoft.com/en-us/KB/324069
How to get HTTPS: Configure SSL on your website - Expert Guides
Kind regards
Vivek
-
Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks
Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration
data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web
for the data. Also, perhaps the home page of IP camera offers software/drivers.
-
Help. How to configure Thunderbird to receive both my email accounts that are through a server?
It seems that it works if you are wanting to have more than one 'account '.
HOWEVER, I wanted to add a 4th e-mail address 3 I already had and worked very well. That of what I did and voila! It worked. It is the path: Tools-> Options-> Security-> passwords-> Saved going on-> show passwords go there and keep it open while you
try to send an email from your new address. A message appears saying that password has failed, I had to insert a password. While information appears automatically in the list on the chart you have open. Of course you need to add this new email address to your list first. -
How to configure Task Scheduler to run the program when the connection is established
Windows 7 64 bit
Dial-up Internet accessI want to use the Windows 7 Task Scheduler to run a program IMMEDIATELY AFTER a dial-up connection is made to the internet.
How can I configure the Task Scheduler in Windows 7 to do this, please?
I am familiar with the Scheduler of tasks with the command line parameters. Any help is appreciated.
Thank you
FYI: If an example is needed, Microsoft Security Essentials can be configured to update virus through this path with the argument definitions:
C:\Program Files\Microsoft Security Essentials/MpCmdRun.exe SignatureUpdate
Maybe someone can use it to show how to configure the Windows 7 Task Scheduler to update MSE virus definitions, once the connection dial-up was made?
Otherwise, for example, another program to run once established a dial-up connection would be OK, thanks
Hello
Scheduler of tasks is time driven.
For order-driven event, you need a script.
Question like that is much better treated in the TechNet IT Pro Forums.
My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.
http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
How to configure microsoft exchange account
How to configure Microsoft Exchange account on iPhone.
I'm getting a problem while creating a Microsoft Exchange account on the iPhone. Can any body tell me How to set up a mail in iPhone because I want to set up an account for Microsoft exchange on iPhone
Thank you in advance
Alondra Cooper
You can read this article to learn how you can put your email on iPhone
-
How to configure firefox to open outlook e-mail links in a new tab instead of having this "crush" a tab currently open? For example, that I have a tab open and consult the information about this. An email comes in via outlook and I want to read a confined link. When I click on the link, it will open in the tab I have currently open. I would like to open it in a new tab.
You mean Outlook, the standalone version and not the new iteration of Live (live.com) mail to Outlook.
I think that the default is to open in a new tab in the last active window, but you can check it out here and replace the default value:
(1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
(2) in the search above the list box, type or paste link.o and make a pause so that the list is filtered
(3) double-click the preference browser.link.open_newwindow.override.external and change it to 3 and OK change
The options are:
-1 = apply the setting in Options > general > tabs of external links (default)
3 = open external links in a new tab in the last active window
2 = open external links in a new window
1 = open external links in the last active tab replaces the current page -
I forgot the answer to my security question, I tried to update these answers, but to update them also, I must first answers old issue of security which I forgot how can I update and change my security question and the answers
?
You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.
(143315)
-
We realize that somebody helps us to clarify the question of using iPhone (iOS9.3)
When you use "braille display" under the English mode, the output is correct. However, using "braille display" in Chinese, traditional mode, the result is false. How to configure iPhone to get an exit "braille display" correct in Chinese, traditional way?
did you ask the developer of the accessory to display braille at the end of the day, they are the only ones who can provide a 100% response
-
How to configure TB to work with Filemaker 10?
Hello
Thanks for any help you can offer.
I'm on a Macbookpro on 10.6.8. I want to send e-mails via Filemaker Pro 10.0v1. Thunderbird 31.0 is my default e-mail client. I think I must also configure mac Mail somewhere in this process. These e-mails will be turned off on 5wcw.featheredpipe.com located on the webmail via my Web site. This will complicate things?
Please excuse me if I'm not using correct jargon here - it's new to me. Support FM advises to use Eudora - I hope it's just old info and Thunderbird will work.
Thanks for any help,
Linda
Looks like the real question is how to configure the file creator to work with Thunderbird. Most of the applications like that just use the default mail client. If it does not, you should ask the people to lead Maker how their software works.
-
How to configure firefox to run as a single instance, so that all external links open within my existing window rather than opening another window?
Sorry, there is no setting for what is built into Firefox.
https://addons.Mozilla.org/en-us/Firefox/addon/tab-utilities/
In the utilities tab > Options > links there is a preference to enable single window mode. -
Question
I do not know how to configure closingFirefox to have all tabs open next time when I open it, without calling to RESTORE PREVIOUS SESSIONTools > Options > general
- Top when Firefox starts: show my windows and tabs from last time
You always bring up your homepage later.
-
How to configure Firefox 4.01 to save all tabs when closing the browser?
In the previous version 3.x.y to Firefox, when I closed the browser, he asked me if I wanted to save my open pages / tablets before closing. When I open the browser again, then it rebooted all previously open tabs / pages. In the version 4.01, before avant de fermer close the browser warns me that I'm closing multiple tabs, but when I restart the browser once again, it does not load the already open tabs. How to configure the browser to behave like the old version of 3.x.y, that is perfectly save all open tabs and load these new opening to restart the browser?
Firefox stores now always the old session, and you can access it by going to the history menu and selecting "restore previous Session."
If you always open the last set of tabs, another approach is the following:
- Click on the orange button Firefox, then select options to open the options window
- Go to the general Panel
- Change the setting "When Firefox starts" to "show my windows and tabs from last time '.
-
How to configure HP ENVY 700 - 210xt to install the graphics card EVGA 650 TI boost.
Can someone tell me how to install the graphics card EVGA 650 TI boost in the
HP ENVY 700-210xt
Product number: E9G99AV
I replaced the power supply with Corsair RM 650 watt power supply that works very well. Now, I want to go to the graphics card EVGA 650 TI boost. Except, I can't get the driver to load with period of installed equipment. When I put the card into the PCI 16 x slot the computer starts with a blank screen. I pass the DVI video port old computer and the new port card white screen of same at startup. If I turn the PCIe port disabled in BIOS, it starts with the embedded video, but same thing impossible to load drivers that are not able to locate the new video card hardware. Makes me crazy! I don't know that I don't know how to configure the Bios correctly or something. Can anyone help?
Hello:
Please see my response to your other post on the link below.
Maybe you are looking for
-
My iPhone needs a 'NFC SIM"?
I know that my SE "works" with my old SIM, but I need a NFC SIM card for the full feature/best security? (I have not yet used, or tried to use all the FEATURES 'NFC' again)
-
Pavilion Mini 300-050np: graphics card driver keeps breaking on any media player - WIN 10 64 b
Not sure if I'm still on the right section of the forum and you can not give much background on this problem. I plug this Pavilion Mini 300-050NP and I'm having no end of problems. The recent is that all the videos that I try to play it crashes. On a
-
I have a problem of choice between almost everything I buy. I always look on what brand it is, what is the price and many other things. Now, I got a hard on for me. Its kind of easy, but I can't stoll decide. OK, so I had to choose between a 64GB 6 i
-
How to solve the message that there is not enough room to restore? I'm trying to restore my iTunes from a backup from 2 days ago. I have less on my machine now that I did then again then.
-
Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD? There is a lot of argument about deplacerb help pages