How to configure Task Scheduler to run the program when the connection is established

Similar Questions

• Failed to create task scheduler to restart the system automatically within the given interval

  Dear experts,

  I have two accounts on my computer. One was a Director and another was normal user. but the two users are protected by Word.

  When I log in as normal user, how can I set a task in the Scheduler to restart the computer once every 6 hours.

  Thank you

  KP Swamy

  Hello PK Swamy.

  Welcome to the Microsoft Community Forum.

  The Task Scheduler service lets you perform tasks on a chosen computer automated. With this service, you can program any program to run at a convenient time for you, or when a specific event occurs. Task Scheduler monitors the time criteria or the event that you choose and execute the task when these criteria are met.

  I understand that you are not able to create the Task Scheduler to restart the system. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the following steps to create the Task Scheduler:

  1. click on start, type taskschd.msc in the start search box and press enter (it will launch the Task Scheduler).

  Note: If you are prompted for an administrator password or a confirmation, type the password or provide confirmation and click Ok.

  2 left click in the right pane on the Task Scheduler Library > open Action in main menu > new folder > name MyTasks > click Ok.

  3. left-click on the MyTasks > menu, choose Action > create a basic task (it open Assistant tasks).

  4. you can enter the name , for example "restart" and click on Next.

  5. in the trigger section, you can specify when you want to run your task, for example:

  a. Select daily and the press Next.

  b. now you can specify the day, time and all reproduce on a daily basis, after the press Next.

  6. in the Action section, you can choose what you want to run, for example, restart your system to do this:

  a. choose start a program and press on Next.

  b. in the field program/script , type shutdown /r and click on Next.

  7. click on end.

  Check out the link:

  Schedule a task

  http://Windows.Microsoft.com/en-us/Windows/schedule-task#1TC=Windows-7

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• How to rename tasks scheduled under win7?

  I would like to know how to rename tasks scheduled under win7

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  It can't be renamed directly, but if you export the task at any place, then re-import, it can be renamed during the import process.

  Then just delete the old task.

• I have download an IDM software.there are as many files how can I understand that by running the file IDM will install in my computer and I can use it.

  I have download an IDM software.there are as many files how can I understand that by running the file IDM will install in my computer and I can use it.

  Hello

  Contact the Support of IDM in this regard.

  The link there is a Support tab on the top right > run the mouse cursor over them for the Support Options > 'how to use IDM.

  http://www.internetdownloadmanager.com/download.html

  See you soon.

• network drive mapped 2003 server need stay connected after journal so that when my script is scheduled to run the player will always be mapped.

  2003 network drive server need mapped stay connected after journal so that when my script is scheduled to run the player will always map. ??

  Hello Scott,

  This is not the right forum for issues with Windows Server 2003.
  Please click the link below to ask your question in the appropriate forum TechNet.
  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

  Thank you

  Marilyn

• How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

  problems with wireless Vista "local only".

  How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

  Hello

  Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

  • You are able to access the Internet?

  Try the steps mentioned below and check:

  Method 1:

  Step 1: Enable or disable a network adapter and then check:

  http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

  Step 2: Run Network Diagnostic tool and check:

  Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference links:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

  Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

  Hope it works.

• How to configure a valid account to windows mail, I also need to establish a connection to make it work with windows 9?

  I want to send an email from the site when I have questions for them even if I'm not setup with a valid account, nor do I have a connection.  My computer runs with broadband. 9 Windows?

  Hello

  You must configure your windows mail with your isp e-mail account, internet service provider for your service to wide band/dialup

  They provide you with account settings you need to do

  Ask them to

  username
  password for your access broadband account / distance with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  and here's how to configure windows mail after getting the email correct account settings

  http://www.vista4beginners.com/Windows-Mail

• How to choose a particular directory in the connection to the FTP server window. He used to have she and her party?

  How to choose a particular directory in the connection to the FTP server window. He used to have she and her party?

  The user interface has changed a bit. The folder field is now in the screen that follows to connect to the FTP server.

  Adobe help Muse | Download a Site from Muse Adobe on a third-party hosting service

  Abhishek

• How can I prevent the shutdown task scheduler engine, get the new display detected to work and avoid receiving the message "Internet Explorer has encountered a problem and stop"? __

  My laptop is a Dell Inspiron 1520, running Windows Vista Home Edition Premium and Internet Explorer 9.  My extra monitor is a Sharp Aquos LED HD - TV, the model LC-46LE700UN.  I've been using a VGA cable to me onnecter the laptop and TV.

  The laptop seems to operate normally when not connect to the TV.

  As soon as the VGA cable is connected to the laptop (without being connected to the TV), the following message appears:

  'Microsoft Windows - Task Scheduler engine has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is found. »

  When initially, I connected the laptop to TV, "new display detected" was automatically acti EV.  Soon, it was activated is no longer automatically.  I was able to activate manually using Windows Mobility Center during automatic activation failed initially but now Windows Mobility Center no longer detects the new view.

  Using Fn + F8, I can view the image on the laptop or TV, but not both simultaneously.

  The message "Internet Explorer has encountered a problem and stop" appears intermittently, but I can still make internet sites and show the content after the message.

  I have download software, myp2p.eu, a site for watching TV programs "streaming", including PPStream, Sopcast, Live, Stream Torrent Sina, a Swarm, TVAnts, UUSee, VGO and Veetle player and canceled downloads for PPL (who failed an integrity check), PPMate (corrupted) and (blocked) TVKoo.

  Norton Security quarantined the installer of UUSee, indicating that it was a high risk of program with many users.

  To a computer repair shop and using a different additional display flat screen, I could not duplicate the problems yesterday (4 October 2010), when the "new detected display" has been activated automatically, and I could see the photo or the other and both screens.

  I tried to restore the system to a date (on the list) before when the problems occurred first - failure of the restoration of the system.  I tried to use scandisk, but received no indication that he had performed and corrected all errors found after restarting Windows.  I looked at responses from forum, the display setting and the new display detected support literature.

  How can I avoid these problems?  Help!

  Hello

  Restoring the system end up with any error message?

  This could also happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To troubleshoot error messages and other issues,
  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Steps-
  1 log on to the computer using an account with administrator rights
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services.
  If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  See this article-
  http://support.Microsoft.com/kb/929135

  This should solve your problem.

  -Robert

• Try to run Defrag/Task Scheduler Service, get the message 'Task Scheduler Service does not work' in Windows 7

  I'm trying to defragment my system (Windows 7).  When I go to START and type in "Defragmenter" it states: "the Task Scheduler Service does not work.  "Start the Task Scheduler Service and try again.  When I do, the following message appears: "the remote computer is not found.  Please tell us what to do next.  Thank you.

  Task Scheduler, Windows event log, and the RPC end Point Mapper are included to start automatically?

  Click on the Start button and select Control Panel, administrative tools, Services. Locate the Windows event log in the list. Check that he started and that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

• Vista Task Scheduler to run a macro in Ms Access 2007

  I need to know how to configure Vista Task planning to run a macro in Ms Acess. I was able to perform this task in XP, but don't know how to set up in Vista.

  Suggestions, please.

  Means of access:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://social.answers.Microsoft.com/forums/en-us/addbuz

  Access support at the link above.

  They will help you with your questions of access when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Can I stop or restart the Task Scheduler service from the command prompt in Windows 2008 service?

  I'm on Server 2008. I have a scheduled task that is not working properly. I went to Services, and I see that it is configured to start automatically and it is actually being run. The problem is that I can't stop, pause, or restart the service. Y at - there a command I can run that can stop or restart the service?

  Why not with the right button of the job itself in the Task Scheduler, and then stop it?

  There are several methods to stop the Task Scheduler service that. Here's one of them:

  1. Create a task scheduled, called 'StopScheduler' as follows:
     -Triggering factor: at boot time
     -Command: sc.exe
     -Settings: time stop
     -User: System
     -Run with the highest privileges.
  2. Right click on the task of StopScheduler, and then click Run.
  3. Solve your tasks.
  4. Restart the Task Scheduler.
  5. Disable or remove the task StopScheduler.

  Note also that this forum focuses on the issue of Windows 7 in a domestic environment. There are dedicated forums for Server 2008.

• Is it possible to rename an existing task in Windows Vista Task Scheduler Library, in the computer management console?

  The 'Name' field seems to be greyed out on existing tasks, even if the other attributes of these tasks can be changed.

  Hi Casey,.

  Thanks for posting the question on the Microsoft Community Forum.

  Want to know how to rename a task into task schedular, I suggest that you try the steps mentioned below.

  a. in the Task Scheduler, highlight the task in question.

  b. click on export and choose a location to save the file (office is as good a place as any).

  c. click Save.

  d. in Windows Explorer, navigate to the location where you saved the file.

  e. you can then rename it as usual. Back in the Task Scheduler, click the import job.

  f. navigate to the renamed file.

  g. click OK.

  h. now highlight the original task (do not forget that there are now 2 tasks, one with the original)

  name and one with the new name), then click on remove.

  Hope the helps of the steps.

  If you have any questions/comments more on Windows post on the Microsoft Community Forum.

• Difficulties to use Task Scheduler to update the database of the program

  Hello

  I would like Win 7 Task Scheduler to cause Locate32.exe Explorer file update there database every 45 minutes when I am connected. (Locate32 can do it by itself, but must operate continuously in the background to do).  I'm obviously not in the right info, because it does not work for me. I got the details to enter another site, as I am not familiar with the Task Scheduler.

  Task field name walked - locate32.

  In trigger I select daily

  then by selecting a time of 5 minutes before present, to test works

  then, in the action, I'm selecting Start a program

  then in program/script I enter 'C:\ProgramFiles\Locate\locate32 '.

  then in arguments - U

  Usually it is a notification when I update of database Locate32. This does not occur with the scheduled task, and when I look in the Task Scheduler for tasks that have been made, this one does.

  I checked the user information is correct.

  Please could someone tell me what I should do instead? Thank you, Jay

  Hello

  We apologize late in the response. This problem can be caused by incorrect settings.

  To display hidden scheduled tasks, follow these steps:

  1. Click Start. In the search box, type Task Scheduler. Then, in the list programs, click Task Scheduler.

  2. On the view menu, click Show hidden tasks.

  Try to re-create the task and check if it helps:

  1. Press the Windows key + R > type taskschd.msc and press enter (it will launch the Task Scheduler)
  2. Click with the left button of the right pane on the Task Scheduler Library > open Action on the menu at the top of the page > new folder... > name MyTasks > click OK
  3. Left-click on the MyTasks > menu, choose Action > create a basic task (it open Assistant tasks)
  4. You can enter the name , for example "restart" and press Next
  5. In the trigger section, you can specify when you want to run your task, for example:
     • Select daily and press Next
     • Now, you can specify the day, time and the game to be repeated daily, after that press Next
  6. In the Action section, you can choose what you want to run, for example, restart your system to do this:
     • Choose start a program and press Next
     • in the area of program/script, type shutdown /r and press next
  7. And that's all, you can press Finish

  Let us know the status.

• The Task Manager shows only the connection information of network with no menu - how to fix?

  I when I try to open the task manager of the only information that appears is the news of network connections.  There is no menu, and when I right click the only option is to close.

  Looks like you run the Task Manager using tiny/small footprint.

  If you double-click on the empty space around the border of the screen of the Task Manager, it will change from normal mode, and then you should see the tabs you are accustomed to seeing.

  You can read about it here:
  http://www.BROADBANDreports.com/FAQ/6905