How to connect ps3 and lapt0op

Similar Questions

• How to connect PS3 to Qosmio G30-201?

  Hey guys please help

  I can't connect my PS3 to the Qosmio G30-201. I tried with the HDMI cable but do not know how to connect.

  Can any 1 advise me how to connect?

  Thanks in advance

  > I use the hdmi cable to receive brillaint image quality and I tried with the Qosmio player with hdmi cable but couldn't make any image what so ever.

  Dear TV, have you read what other people write here. To send the video signal to the laptop, you use VIDEO IN port. HDMI port on your laptop is probably VIDEO OUT port. Also, it cannot work.
  Read it please user manuals to see which ports are video in ports. This port allows to transfer the video signal in your laptop.

• How to connect success and details of connection attempt failed router to Syslog?

  All,

  How can I configure my router Cisco 837 to log to syslog all successful and attempted connection failed to the router via any interface?  I would like to get very verbose information about attempts to connect (success and failure) as possible, including the source, userid attempted, ip address etc.

  All comments and suggestions would be greatly appreciated!

  James

  Archives
  The config log
  Enable logging
  notify the contenttype in clear syslog
  hidekeys
  opening of session
  192.168.1.1 logging
  block connection-for 60 tent 3 within 60
  connection sur-Echec connect all the 1
  connection on success - open a session every 1

• How to connect DWR and EWR

  I have created a script in the repository of work development and exported as XML. Now, I logged my repository of operational work and when im trying to import it, I'm not able to see this XML list. Instead the file where I exported from that, I don't see any XML?
  
  No idea how to do the same thing

  If you try to import any scenario of a folder, that folder must contain the exported xml scenario ias file and this file name must start with "SCEN_", otherwise it will not visiable during the import operation.

  Thank you
  Fati

• How to connect fgen and mso in labview?

  
  

  Here's a simple example. You will need to have a BNC cable linking the FGEN and ASM.

  This example configures then activates the function generator and then use the automatic setting to configure ASM. The acquisition uses the determined settings of autoconfiguration.

  It disables the function generator output once the acquisition occurs. You can remove the FGEN Stop.vi if you want to keep the camera running.

  

• How to connect to Play station 3 W530?

  Hi all

  Can someone help me how to connect PS3 on my W530 with audio?

  concerning

  Spengler

  Hi Spengler, I don't think that this is possible. There is no video input on the W530. I have not heard of a way to convey the image of the ps3 to a network without HW additional device either. If you want to buy a video solution, try easycap http://www.youtube.com/watch?v=2KkAI3X3uB4
  I recommend you get a cheap TV.

• Why do I get "Message Agent wants to use the"login"keychain and how to stop it and 7 other bunch of connection."

  Why do I get "Message Agent wants to use Keychain 'login' and how to stop it and 7 other bunch of connection points most every time I login?

  Hey Roman man,

  I understand that you see a prompt for your login keychain. I can't anymore how do I fix this.

  Now if you have recently changed your password for your Mac, then the password for your keychain will need to be updated. You can make this change in the Keychain Access application. If you do not know the password, then you need to reset the password in the keychain. Take a look at the article below for specific details get this sorted out.

  If your Mac keeps asking for the password in the keychain
  https://support.Apple.com/en-us/HT201609

  Take it easy

• How to connect two computers and LAN

  I can't get my toshiba to interface with my desktop computer or to connect to the internet via a CAT5.
  I tried everything I know.

  I'm not too sure about the LAN MAC? He just will not connect even if the device is functioning properly.

  Any ideas?

  Here are the instructions how can connect the two computers.

  -First of all, you will need to disable the firewall.
  -Then you need to set the same workgroup on both computers
  -in the Lan Card Properties-> Protocol TCP/IP settings, you must assign the IP address manually. That is, a computer must use the 192.186.50.1 ip address and the other computer must be set to 192.186.50.2.
  -MAC address is fixed and cannot be changed. Each LAN card uses unique mac address

  After these settings, you must restart the portable computers (computers)

  PS: I recommend Google for details and further instructions.

• How can I connect Skype and Microsoft

  Anyone know how to connect the two?

  This should help:

  https://support.Skype.com/en/FAQ/FA12060/how-do-i-link-my-Skype-and-Microsoft-accounts

• How to connect 12 '' MacBook (2015) to a 24 "or 27" Apple Cinema Display AND fresh!

  I made this post on my site here: https://underground.net/how-to-connect-an-apple-display-to-a-usb-c-macbook/ (which I will update regularly)

  This installation took me a LONG time to understand, but it works very well, no wake mode 'sleep', etc.

  To connect the new MacBook to a 24″ Cinema Display or Apple 27″ LED Display Monitor (who both have a record which is the same as the Thunderbolt connector, but are not actually screens Thunderbolt) you can opt for a really cheap option, as the following point 3.1 AllSmartLife USB Type C adapter Mini DisplayPort Amazon for $ 20 :

  

  That works very well, but you cannot load your computer when you are connected to the screen, nor can you plug something else on your computer as an external hard drive, etc.

  To be able to recharge your computer AND connect to the screen AND connect other devices to your MacBook, you need the following configuration, and it works great, btw.

  1 first download this USB-C for USB multi-port, Belinda® USB-C for 3 ports USB 3.0 , which is about $ 36 on Amazon.

  

  2 then, you need an expensive element, StarTech.com USB 3.0 to DisplayPort 2560 x 1600 video card Multi monitor external adapter (USB32DPPRO), which is around $74 on Amazon:

  

  3 Finally you need a cheap item, the Cable questions DisplayPort / Mini DisplayPort male to female adapter at $ 9 on Amazon:

  

  Plug all the in such things and he ends up you look pretty clean where it connects to the computer, as you can see below and you can plug in the USB port of the screen on the hub and use the speakers on the screen, AND you still an available for a hard drive, external USB 3.0 port.

  

  It will cost you around $119! Wow, that's a LOT, but it works. Or you can go cheap and just get the first card for $20 but charge your MacBook by disconnecting from time to time to plug in the charger. What a PAIN in the * Apple.

  The new MacBooks coming will be equipped with a combined USB/Thunderbolt-c plug that should * hope * connect a screen and charge at the same time cheaper, but who knows?

  If you want me to your post something, I can put it on the MacBook 2015 using forum boards.

• Tecra M2: How to connect on port DVI - D LCD with DVI - I and at 1600 x 1200

  My Toshiba Tecra M2 has a GeForce FX go5200. Docking station has a DVI - D port.

  I want to use an external LCD screen which is equipped with a DVI - I port.

  When you connect a DVI - D cable to the DVI - D between the ports and monitor Replicator and if I set to 1600 x 1200 which is desired (and support for the resolution of the screen) then the display does not fit in the liquid crystal display and therefore the screen starts to pan.

  If I use a (next to the PC) VGA / DVI - I (next to the screen) cable then I wanted resolution of 1600 x 1200.

  Please advise so how:

  Connect the Port DVI - D from Toshiba to LCD with DVI - I and at 1600 x 1200.

  Help, please...

  Hello

  I agree with Tom.
  I visited the Toshiba knowledge base and found this FAQ:

  Max. Resolution DVI - D on Advanced Port Replikator II III & Tecra M1 and M2
  http://support.toshiba-tro.de/KB0/TSB4900S10001R01.htm

  PS: This database is really useful. I found very interesting material. Everyone should use it.

• How to connect a wrt150n and a whole wndr3400v2 to extend your wireless connection

  How to connect these two wireless routers, but the first as a main router without losing my security and configuration of port forwarding?

  Thank you in advance for your help!

  Thank you very much for the help. The wndr3400v2 is enough for my house. Yes, problem solved.

• How to connect to internet on my xbox so I can access live and play online?

  Original title: unable to connect to live in barracks.

  I am in the Navy and I live in the barracks. To connect to the internet here, whenever we record in us get redirected to a page where we are required to accept a terms of the convention of use until we really connected. On a laptop, all I need is hit access Internet accept button and "poof!" On an xbox, I can't connect at all because there is no way to accept the terms of use beforehand. How to connect to internet on my xbox so I can access live and play online?

  Hello

  Check the link for Xbox support:

  http://support.Xbox.com/en-us/home

  In addition, the link and post your request in the forums of games to help:

  http://forums.Xbox.com/GFW/default.aspx

• How to connect a Sony Playstation 3 to listen to music and photos from my pc

  How to connect a Sony Playstation 3 to listen to music and photos from my pc?

  Hey waynelalumandier

  ps3mediaserver...

  That's really all you need. If you have any questions about this, check out the link below. Download and an active forum which will certainly be useful for you.

  http://code.Google.com/p/ps3mediaserver/

• How to connect an expiration date in the ID and the password set cached?

  I have windows 2003 race. I would like to know if there is any kind of code and where it must be added have log vpn users in the local network before they user of the laptop to go on the web?

  In other words, how I plug in and the expiration date for the caching of id and password?

  I'm not sure that's what you want.  You can change your machine such as passwords are cached at all, but then a person could not connect to his laptop unless it is connected to your domain, when it connects (forget not to use your computer on a plane).  If you want to control access to the internet, many businesses use a Proxy Server with a password to regulate the internet connection.  See if these MS articles shall apply:

  "Caching of security credentials in Windows Server 2003, Windows XP, and in Windows 2000"
    <>http://support.Microsoft.com/kb/913485 >

  "Cached domain logon information.
    <>http://support.Microsoft.com/kb/172931 >

  HTH,
  JW