How to connect to internet on my xbox so I can access live and play online?

Similar Questions

• When I connect the wi - fi, 1 only one computer can access it, and my computer does not work.

  I have to plug the ethernet cable directly into the ATT modem for computer work, so when I hook back in ethernet cable to a Linksys wireless modem, computer at home does not connect & only 1 laptop in the House connects to the time? When I'm addicted to the Wi Fi & will not work my computer at home, I click on the tab "run diagnostics" and he teaches me something about my IP address, but it is impossible to remedy. And my son can't use his laptop or his XBOX live when my daughter is on her cell phone and vice versa.

  Very frusterating! It worked just fine and then one day suddenly it happened. I called Att which is my DSL connection and there is nothing wrong with their modem or with the connection to att. I even bought a new linksys modem that has the wireless and the modem router all-in-1 and had the same problem. Help! I can't ask Dell toll-free because my warranty has expired.

  It's as if the computers are in competition with each other for internet access!

  Hey Sandra0lynn,

  I moved your thread to the Internet Explorer for Windows Vista - networking forum forum and marketing online.

  It seems that either DHCP has been disabled on your router and/or all your computers are set to use the same IP address.

  First log into your router and verify that DHCP is turned on or enabled. If you need to know how to connect to your router and check this option, you will see the user manual or online help supplied by the manufacturer of your router because steps varies from a manufacturer (as well as models).

  After that make sure you that DHCP is enabled, the next step will be to IPv4 each computer and IPv6 resolves to get automatically. To do this, take a look at the procedure in the below link and select obtain an IP address automatically for both types of connection.
  Change TCP/IP settings

  Hope that helps.

• I use the g5 U800 mobile.i need to know how to connect to internet from my mobile to pc.

  mobile g5 Internet connection for pc

  I use the g5 U800 mobile.i need to know how to connect to internet from my mobile to pc
  Hello
   
  You must have GPRS activated from your network service provider.
  
  To connect the phone to the computer, you need a PC suite installed on the computer. If the phone manufacturers have supplied PC suite CD, then install the software on the computer.
  The operating system on the computer and the mobile phone are different, so communication is not directly.  PC suite software acts as a mediator between the computer and the phone and helps to establish effective communication between the phone and the computer. If the CD is not provided, then look for in PC suite online and download it.
  
  Reference: Connect to the Internet via a mobile phone Bluetooth active
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-the-Internet-using-a-Bluetooth-enabled-mobile-phone
   
  Thank you

• Learn how to connect to internet from pc to mobile phone with a usb cable

  I want to know how to connect to internet from pc to mobile phone with a USB cable

  'S called it tethering.

  1. Search for this term in the manual of your phone.
  2. Search for this term in the contract of your phone network operator because not all telephone network operators allow tethering.

• How to check my internet speed in windows 7? can you tell me the steps?

  How to check my internet speed in windows 7? can you tell me the steps?

  There are many sites to test bandwidth speed, Speedtest.net is one of them:

  http://www.Speedtest.NET/

• How to connect to an Adobe Javascript(Folder Level Script) SAP Web Service and retrieve the response in a table of the Adobe Javascript/AcroJS. Could you please it explain with an example. I have two required input parameters that must be filled.

  How to connect to an Adobe Javascript(Folder Level Script) SAP Web Service and retrieve the response in a table of the Adobe Javascript/AcroJS. Could you please it explain with an example. I have two required input parameters that must be filled.

  I s generic SOAP example/tutorial on my blog: get a serial number in a form using SOAP - KHKonsulting LLC

  The web service uses only a single parameter, but you should be able to adapt the code to two arguments without problems.

• Help. I created a page and I would like to connect it to a hyperlink so that people can access it by clicking on the words.

  Help. I created a page and I would like to connect it to a hyperlink so that people can access it by clicking on the words.

  Copy & paste this code into your parent page where you want your link will appear.

  http://example.com"> link to example.com.

  
  

  Change the URL in the properties panel link field.   See screenshot.

  

  Nancy O.

• How to connect to internet via WiFi network?

  Can someone help me please? I'm desperate to be connected to the internet with my toshiba satellite pro wireless free.
  I had it up and working before but then I lost my connection, I'm normally very good with that sort of thing. Is there a helpful soul out there who could give me a step by step idiots guide how to connect my laptop without cables, etc.

  Any help would be appreciated as I want to use my laptop to its full potential.

  Thank you very much

  Hello

  First of all, you need to know if the wireless network adapter is installed on your laptop or not.
  Also check device manager if the Wlan card driver is installed correctly.
  Then you must configure your WLan router.
  In this case, you should check your manual for the router WLan configuration of this device.

  If you want to connect to the laptop to the router WLan so you must enable the wireless network adapter. Usually the WLan switch on the side of the laptop must be turned on (LIT)
  Then, you go to the WLan antenna with the FN + F8 key combination.

  If everything is on then you should go to network connections, it you have available WLan network properties. Go to wireless networks and select view wireless networks button. You should see your WLan.

  If you have set up the WLan encryption on the router, then you must first set the password to connect to the WLan.

• Satellite P100: How to connect to internet via WiFi?

  I read a post above that says that the sticker on the bottom of the laptop ' wireless network: no w/l ' means that there are no installed wireless.
  I'm fairly certain that my Satellite P100 has installed. I customized my phone, ensuring that I have added wireless for the school.

  I have an on-off switch for the wireless on the case. Also, when I entered a zone wireless for the first time, a program (Q-Connect) came.
  I reinstalled Windows XP and wonder if it is a software that is missing (which has been the case with other similar programs audio).

  This could be the operator error?
  I don't know anything wireless.
  How to connect to wireless internet?

  Hello

  First, you must be sure that your laptop has WLan card to 100%. Go to the Device Manager and check the network adapters section. If you will see card WLan (intel or atheros) then you unit definitely has the Wlan card.
  To use the WiFi network, you must configure your Wlan router. Consult the manual.
  You must then activate the Wlan switch on the side of the laptop and use the combination FN + F8 to select the WiFi network.

  For the other steps, you can also check this forum wireless. Here you will find a lot of descriptions.

• How to create multiple windows for a vi that you can access at any time... just like the use of creating new window in internet explore

  Hello guys,.
  I want to create a vi that dat when I press a button on the front of the vi, it opens the same vi in another window... and I should be able to work on this new window also able to work on the previous window without closing... Just like opening a new window when you use internet explore...
  I try to make my vi one reetrant vi but when I click on the new button in the window my vi... a new clone window upward I can control but the previous windows isn't accessible no I close the current window. I want a way I can access the two operation window and d vi of one does not affect the other, as when the indicators are updated in a single window another window will not update...
  Thank you...

  I discovered a way to call a new window... I did use to dynamically call the vi again whenever you press the new button in the window rather than call a Subvi. Thanks Guy

• How to connect to internet/web manually? (not automatically)

  Hi all

  I just got my Milestone and noticed that whenever my phone has a signal, it connects immediately to the Internet as well by the service provider. I wanted to know the ff:

  1. If I see the icon beside the signal and battery indicator (it looks like 2 arrows, 1 up down 1) on the home page that I am connected to the Internet via my ISP, it to say that I'm already charged for surfing the internet or will it only "connects" as soon as I get my browser , email, etc.? I noticed the icon which looks like 2 arrows only "highlight" when I enter the browser, e-mail or other applications that use the net, so I don't know if it means that I am charged only when I get the apps that use the internet?

  2. is there a way to simply manually connect to the internet? For example, when I enter the browser, can he ask me first asked how I want to connect instead of just automatically connect using my ISP connection?

  3. when I free Wifi, the priority phone using Wifi connection via the provider of services on the web connection?

  The reason for my questions, it of that I can't connect to the Internet using my ISP because it costs a lot of money and would connect on the web only when a Wifi connection is available.

  Hello

  There is a free app on the market: APNdroid.

  This app disables 3 G/EDGE/GPRS communication by changing the name of the carrier APN. This disables any Internet connection.

  Hope that helps.

  Nicolas

• Satellite A200-1RK: how to connect to internet

  Hello

  I just bought my daughter an A200-1RK for Christmas.
  I would like to have the internet up and running when she opens it up, but I'm worried about the best way to do it.

  I have 2 mb broadband via a NTL cable modem.
  Could connect a usb cable from the modem to the laptop or that I would be able to connect the modem to the laptop using an ethernet cable?

  Or the other of these works would be or could they damage my laptop girls?
  I'm afraid to try incase I damage it is why I asked here first.

  I know it's maybe a stupid question, but I'm new to all this.

  As a final would be better just to get a router cable? Thank you, Andy.

  It really sounds like you are a computer newbie!

  You won't damage anything if you do use force to connect the laptop to the cable modem. ;)

  The modem (DSL modem) must be connected to the portable LAN port and no USB port.
  Usually, the gateway must be configured first to get access to the internet.
  Then simply connect the Lan of the laptop and the network adapter must assign TCP/IP automatically.

  If you have any other questions, do not hesitate to ask

• How to connect to Internet

  I am Havin problems with connected to the internet.
  I entered all the information such as the password to network etc, but when I open firefox it says "Address not found" :|
  Anyone know what I do or what I'm doing wrong?

  Soon :)

  I think you have to tell us
  What model machine
  What operating system
  What method of internet connection you are trying to use (wireless, wired, via a router, etc.).
  until someone can really help.

• How to connect to internet on my laptop with my android Tablet MID Google? What else should I buy?

  Now I have a MID Google Android 4.0, 1.2 GHZ, 4 GB of Tablet. I expected to plug it into my lap top and get on the internet for many things. I tried, but there is no internet connection event.  Maybe I'm missing something. I'm a grandma trying to understand this. Can you help me? I'm on a laptop with modem wireless, Windows XP, maybe I need a adapter USB ini no matter this is. Thank you.

  Hi, Maud.

  Welcome to the Microsoft community.

  You will be able to connect to the internet using a Wi - Fi connection. To set up the device for wireless, I suggest you to contact the manufacturer of the device and check if it helps.

  If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• How to connect to Internet high speed Roadrunner

  connecrt to roadrunner highspeed internet

  Hello

  1. what exactly is the problem that you are facing on the computer?

  2. what operating system is installed on the computer?

  I suggest you refer to the link to Roadrunner support:

  http://help.RR.com/AA/rrwho.aspx?resetDiv=true&ReturnUrl=%2fHMSLogic%2fmain_contentwell.aspx