How to connect two network switches Force10 S4810P

Similar Questions

• How to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!

  Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
  step by step information!

  Hello

  I suggest you to refer to the links and check if it helps:

  Create a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

  Join a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Let us know if it helps.

• How to connect two databases to a single listener

  Hello
  
  How to connect two databases to a listener.is it is possible or not

  Hello

  Yes, you can record a single listener to respond to several databases. There are several ways to do it and the best way that I would suggest for you is the use of "Network Setup Wizard" or "netca", which is a graphical interface that allows you to meet your requirement. Otherwise, you can hardcode in your listener.ora file located in the 'ORACLE_HOME/network/admin/listener.ora '.

  Example is as follows

  Listener.ora

  SCREW =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = lab01) (PORT = 1521))
  )
  )

  SID_LIST_VIS =
  (SID_LIST =
  -1 database configuration
  *(SID_DESC =*)
  * (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)*
  * (SID_NAME = DB1) *.
  *)*
  -Database Setup 2
  *(SID_DESC =*)
  * (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)*
  * (SID_NAME = DB2). *
  *)*
  )

  Then restart your listener.

  Kind regards
  Asif Muhammad

• How to connect two harddiscs in a computer

  I don't know what's going to happen if I connect the

  hOW to connect two harddiscs in a computer

  http://US.yhs4.Search.yahoo.com/YHS/Search?p=How+to+Connect+Two+harddiscs+in+One+Computer&fr=AltaVista&FR2=SFP&iscqry=

  http://www.google.com/#hl=en&output=search&sclient=psy-ab&q=how+to+connect+two+hard+disks+in+one+computer&oq=how+to+connect+two+harddiscs+in+one+computer&gs_l=hp.1.0.0i13i30.3151.3151.0.7535.1.1.0.0.0.0.224.224.2-1.1.0...0.0...1c.b0ubsyG8v-w&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=5b25e3ab4ae8856e&biw=833&bih=548

  UTC/GMT is 17:27 on Wednesday, August 8, 2012

• How to connect two clips?

  Okay, I'm making progress - but I don't know how to connect two or more items.

  Patrick

  Thanks for the reply.

  Could you clarify... Once you've created your content of chronology...

  When you said made it... do you want to say that you pressed the button made above the timeline in order to obtain the best possible overview

  or were you using the go Word to signify that you have exported the content of the timeline to one of the categories under publish + share/computer?

  If you have exported (saved) via Publish + share/computer/and other categories, the export dialog box has a Save In: location. And you will find

  your file exported to this place (you can change to one of your choice for the default location).

  

  If you save the project (.prel) file without exporting, you can find the file of the project in several ways. Means the faster would be to

  Hold the cursor of the mouse on the name of the project (top right of the workspace Expert), and the path to the project file should be revealed to you.

  

  I demo had this to 12 (13 won't get installed until Tuesday). But, same idea 12 or 13.

  Guided tutorials did you use for your excellent results? All or one in particular?

  You can go further with free learning tools and the use of exploration and experimentation.

  The possibilities of creation using Premiere Elements are endless.

  Best wishes

  RTA

• How to connect two databases on two servers

  How to connect two databases on two servers. For example
  a serevr is in India and another in Australia.
  The following example is correct or not
  
  Select A.ID, B.Name [10.50.17.87] .HR. EMP A, [192.168.100.125] .HR. TRANS B
  Where A.ID = B.ID

  You must use a database for this link. The syntax is defined in the reference SQL here: http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/statements_5005.htm#SQLRF01205

• How to map a network switch manually

  Hello

  I have a Data Center remote I'm trying to draw, without visiting the site and the tracing of cables. Because I can access the table of addresses on each switch, what is the best way to know if button A is connected to the switch B? the switches in my MS are stacked, which complicates things a bit.

  For example when I look at my MAC address table, almost all my switches have a MAC by port, port of the channel apart (I think it's a link aggregate port) which shows the MAC addresses belonging to Dell, Cisco and other devices. How can I find out the opening of the canal in which plugs directly? Get a Dell switch or say a Cisco switch?

  Thank you

  Just in case someone else needs it, I discovered the following invaluable tools:

  Use the web browser on each switch to view nieghbors LLDP (real gives of switch ports and can also show the details announced on non Dell kit)
  Use the commands 'show deck' and «see the mac»
  See the neighbouring ISDP is also useful (depends on the switch)
  Open Network Manager was not as smart hoped for example, with the SNMP strings to two directly connected switches, I could not find a way for the NOM give the link real ports

• Connect two networks with different subnets

  I have a network that is totally excluded from the rest of the network. It consists of a switch Allied Telesis AT - 8624T layer / 2M 3, a computer and a few PLC devices.

  It is the only switch Allied Telesis, the rest of our network is Cisco. Allied was by a seller.

  Our network uses a 10.10.1.X network, but this standalone network uses a 192.168.201.x. I need to connect the two networks, because a system on the network 10.10.1.x need to access the computer on the network 192.168.201.x. I wonder if I can do it with a 2960 s Cisco or if I should get a router between the two switches.

  I am pretty new to the implementation of this type of equipment, was suddenly thrown into the mix, I appreciate any help that can be offered. Thank you.

  Hello!

  You can do this with your switch 2960, they take over the static routing. Please see the following link for detailed configuration instructions:

  http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst2960/software/...

  You will not be able to perform routing inter - vlan but pointing your static routes to the other managed switch interface you will be able to achieve. BE aware that the other switch must have some sort of routing capabilities too or you will need to get a router.

  I hope this can help, greetings!

  JC

• How to connect two computers and LAN

  I can't get my toshiba to interface with my desktop computer or to connect to the internet via a CAT5.
  I tried everything I know.

  I'm not too sure about the LAN MAC? He just will not connect even if the device is functioning properly.

  Any ideas?

  Here are the instructions how can connect the two computers.

  -First of all, you will need to disable the firewall.
  -Then you need to set the same workgroup on both computers
  -in the Lan Card Properties-> Protocol TCP/IP settings, you must assign the IP address manually. That is, a computer must use the 192.186.50.1 ip address and the other computer must be set to 192.186.50.2.
  -MAC address is fixed and cannot be changed. Each LAN card uses unique mac address

  After these settings, you must restart the portable computers (computers)

  PS: I recommend Google for details and further instructions.

• How to connect two wireless laptop to an unsecured internet connection

  me and my friend. We have detected a wireless network of neighborhood, it is able to connect, but I can't

  How to connect wirelessly

  MR. PHILIPPE,

  Make sure you have your wireless card install correctly on your computer. If you have a laptop then you have a wireless card already in the machine.

  That's all need you. Go to start > Control Panel > network connections, here it takes a current wireless connection. If no, you must install you wireless drivers from the manufacturing of the Wireless card in the computer. (Linksys, Netgear ext...)

  Please rate me upward if you find my post helpful. Thank you!

• Tracer Cisco packet 6 / How to connect 3 multilayer switches

  sans_titre.jpg

  

  I wan't to ping of 'PC' in the right (DIRECTION FES) for PC on the left (DIRECTION KENITRA) but when I ping fails, I tried to connect 'Multilayer Switch3' and "Multicouche Switch0" but I failed, I used the following commands:

  Multi-layer router RIP Switch3 (config) #.

  Multilayer Switch3 (config) #network 10.0.0.0

  Multilayer Switch3 (config) #network 192.168.30.0

  and

  Multilayer Switch3 (config) # router eigrp 1000

  Multilayer Switch3 (config) #network 10.0.0.0

  Multilayer Switch3 (config) #network 192.168.30.0

  but without any effect.

  Please, help me succefuly ping and connect all the succefuly of networks.

  Khalil

  You must watch your switching configurations and go through them carefully.

  Just looking at them, I can see that EIGRP configurations are wrong.

  On each switch, you should have statements of network for connected networks, not for networks that are not directly connected.

  If you go through them again and refer to your diagram, you should be able to see that you have set up statements of network under EIGRP for networks that are connected to other switches.

  This is why EIGRP is not coming.

  Jon

• How to connect two .mxml pages?

  Hi all,

  Any body help me, how to link two pages in flex.example, if you click on the button first page.it displays another page.

  Kind regards

  welcomecanv

  Jin

  You can do with the States, in accordance with the example (switching with both navigation and the use of events to change the mxml)

  http://gumbo.flashhub.net/wizard/ - source included

  David.

• Dell XPS 8500 with 1 GB AMD Radeon HD 7570 - how to connect two monitors or?

  Hi, I got my Dell XPS 8500 today with the 1 GB AMD Radeon HD 7570.

  Before buying the office, I read online that the AMD Radeon HD 7570 supports Eyefinity.   Eyefinity is supposed to be capable of supporting 4 monitors using the HD 7570 map by the description here: http://www.amd.com/us/products/desktop/graphics/7000/7570/Pages/radeon-7570.aspx#2

  When you look at the photos of the Dell XPS 8500 online I thought that Eyefinity support was to use a display in addition to the DVI port Port.   Specifically, I thought that a monitor has been supported by DVI monitors while 4 thru two supported using an active connection to the view port using a product like the DisplayPort Accell UltraAV K087B-005 / 3 x multi-monitor DVI - D single-link adapter.

  To my surprise the graphics card came with an HDMI port, not a display port and I believe that HDMI port is a connection from one to the other, and not one of many display connection.   Maybe someone can correct me if I am wrong on this point.   But if I'm not wrong then, this would imply that, at most, the Dell XPS 8500 with the AMD Radeon HD card 7570 can support up to only 2 monitors (one DVI port) and the other HDMI port instead of 4 monitors as described on the above link.

  Others would agree with this statement?

  Note that the Dell XPS 8500 also has a VGA connector on it but I tested it using a monitor on VGA and a monitor on the DVI connection and the computer that reported as an invalid monitor config.   Probably because the VGA and DVI connections are originally the same video display as connect two monitors to display even has no logical sense.

  I have not tested the HDMI port for the second monitor again mainly because I don't have a spare HDMI cable on site at the present time.   I'll probably buy one tomorrow unless I see the comments of my post, specifying that a second monitor can be moved through the HDMI port on the AMD Radeon HD 7570 map...   I'd be surprised if that were the case (1 monitor system would be quite restrictive), but it is difficult to say with certainty, because the VGA and DVI connections at the same time have been marked by the computer as an invalid configuration...

  Any thoughts on the different ways to configure multiple monitors with the XPS 8500 and the 1 GB AMD Radeon HD 7500 is appreciated.

  Thank you.

  Doug

  If the card is not a display port is not an eyefinity card and cannot stand 3 monitors... it will be 2 monitors, no problem... I couldn't find anywhere on the site of Dell, where he says that the card was eyefinity... If you want 3 assumption of monitors you can buy a video card that supports.

• How to connect two BlackBerry

  Hi all, I have a question.

  Which is the best method (udp, tcp, http, using the pushRegistry...) to connect two blackberrys and set the communication with IP address?

  Thank you!

  except maybe in a wlan environment (which I do not know of the), you are not able to directly connect two blackberries. It must be a server between the two, using push, if they are connected to a BES or mail/bbmsger if not.

• How to connect two systems using network flow

  Hello

  I am trying to send data to a connected to another system on the same subnet. I do this by using network stream, but the connection is not established, I don't know if there is a configuration that I need to do. Can someone please look at this.

  Thank you

  You get an error?... Are you able to ping between two PCs?

  Have you checked your firewall settings?

  [Edit]: did you give the ip of the target in view vi?