How to continue iMessage on laptop after iPhone ceased to exist?

Similar Questions

• How to continue creating recovery discs after update window 8.0 to 8.1

  My laptop is hp 2000-2d62nr notebook pc (energy star) S/N: 5CG342027W

  I could ruin Manager HP recovery as follows:

  I was trying to create the recovery for laptop HP window 8.0 diskettes. HP Recovery Manager required 5 discs. After 2 discs actually, I left my cell phone for two hours. Then I went back to my laptop and saw the window asking me to update the window 8.1.  And I've updated to 8.1 window.

  After window 8.1 update done, the system has been restarted. On the way back to HP Recovery manager, he asked me to continue the third recovery disks. I selected "continue." However, drive 3 checked failed to 15%, the pop-up window asked me to use a different disk and try again. I've tried times second restart my laptop. Yet once, verified 3 disc failed at 2%,

  How to clean up this mess and do a 2nd set of recovery disks?

  Thank you for your suggestions.

  Best regards

  You can order your support page recovery media. Scroll the list of the drivers/software to see the possibility of ordering.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=6550395

  There is a small chance that you can get a free package if you call technical support HP & tell them that your laptop goes down being created. 800-474-6836.

• my iphone 5 c got stolen and I tried to find on find my iphone, but it continues to show that my iphone is offline... How can I find my phone?

  my iphone 5 c got stolen and I tried to find on find my iphone, but it continues to show that my iphone is offline... How can I find my phone?

  What to do if your iOS device is turned off or offline?

  If your missing device is turned off or offline, you can still implement this Mode lost, lockor remote wipe. The next time your device is online, these measures will take effect. If you remove the device from your account while it is offline, pending actions for the device will be cancelled.

  If your iPhone, iPad or iPod touch is lost or stolen

• How can I turn off the laptop after restoring it to factory settings?

  Hello everyone

  I'm selling my Portege R830-10 q If I want to restore it to the settings to factory (out-of-box state) AND THEN TURN IT OFF.

  I brought the laptop to factory settings successfully using the _TOSHIBA recovery Wizard_ and choosing * factory default software recovery (Recover State out-of-box) *. However, at the end of the process of recovery and after everything is back in place I was not able to TURN off the POWER to the laptop. It only gave me the option to restart. After rephrasing it, the Windows installation process starts.

  I don't want to install Windows, i.e. language, keyboard, user account, etc. I want to leave the Windows installation for the person buying the laptop to me. How can I turn off the laptop after the recovery of the system without having to install Windows?

  I would appreciate your help.

  Concerning

  Pedro

  When the recovery process is complete and you are prompted for a reboot just press start button / stop and turn it off. I think it's only thing you can do.

  Anyway, why not start Windows and go through the configuration option. New owner can modify this basic anyway parameters. As username Admin and language and the keyboard can be set as default.

  For example, if you have a picture of German recovery set to German. New owner can change in any case.

• How can I reinstall safari on the iphone running ios 8.1.3 5 safari disappeared after the last update

  How can I reinstall safari on the iPhone 5 with ios 8.1.3? Safari disappeared after or while I was doing the update.

  Safari is an integrated application and cannot be deleted, but it can be hidden by setting restriction.  Check settings / general / Restrictions and see if Safari is simply disabled.  If not, then it must be somewhere on your iPhone because it can not be deleted, that is maybe it drew into a folder, so use Spotlight search to look for.

• If I have windows vista Home Premium 32 bit genuien instalation in my laptop after how I can to update or upgrade in Windows Vista Home Premium 64-bit

  If I have windows vista Home Premium 32 bit genuien instalation in my laptop after how I can to update or upgrade in Windows Vista Home Premium 64-bit

  If I install windows vista Home premium genuine in my laptop after how I can to update or update 64-bit of Windows Vista Home premium 32 bit

  If I install windows vista Home premium genuine in my laptop after how I can to update or update 64-bit of Windows Vista Home premium 32 bit

  Hello

  You are unable to update or upgrade Vista 32 bit to 64 bit of Vista.

  32-bit to 64-bit, or 64 bit to 32 bit is done by a new installation using a full version of the operating system.

  32-bit and 64-bit are different operating systems.

  See you soon.

• I want to reinstall Photoshop CS6 to my laptop after that he died. How can I do?

  I want to reinstall Photoshop CS6 to my laptop after that he died. How can I do?

  Musoma boy

  About 1/2 at the bottom of the page there is a link that says

  Photoshop CS6, Photoshop CS6 Extended

  If you click on that you should get links.

  Be aware that with Photoshop, you are allowed 2 activations. If you have reached this limit before installing the software, you must contact Customer Support to 'reset' your activations - if explain you the situation, you should be fine.

  See you soon

  John

• question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4?

  question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4? I got a dialog box indicating that I had to run Java SE runtime (or something to that effect), when I approved it, then try opening cs5.5 Indesign, the program closed unexpectedly at startup. If I uninstall program & reinstall, my documents will be free, or are they toast? Help!

  Hi rabbit Art,.

  Migration from one machine to the other problem most of the time. So I recommend you to reinstall the software. Concern is that none of your documents will be made.

  Kind regards

  Romit Sinha

• Messages of the Sierra and the problems of continuity iMessage

  I took these communities to try to resolve a problem which, for me, is as old as the first day iMessage became available for Mac.

  I can't emphasize how incredibly boring, it is completely out of sync how both are. The problems are always the same:

  (1) never are conversations in the issue of order/same on both devices. For example, for a conversation that has been exploited to iMessage on my iPhone, when I open my Mac, it appears in the notifications, like new. All the answers are there.

  (2) a conversation that has been deleted from the iPhone suddenly appears on the opening on my Mac... seriously?

  (3) the conversations that are deleted on my iPhone does not disappear in the Messages and vice versa.

  To sum it all, pretty much the case is that both apps, while they expected to work simultaneously with fluidity to do what they want when they want.

  This has been a problem since iMessage became available on Mac OS for the first time (think it was Mavericks). I've been waiting for Apple to fix this with each software update to make OSX or iOS. But guess what...?

  My Mac running OS Sierra and my iPhone 6 s more running iOS 10.0.1. Everything that could be activated in so that they can work together has been activated and triple checked. I would really like to know if anyone has a way to fix this or if there is other people are having the same problem.

  Hello

  An excellent explanation of exactly how iMessages works on iPhone and Mac.

  It does the same thing, if you add in an iPad or and iPod Touch.

  iMessages are pushed, the Treaty is called, for devices that have been associated with (by adding the Apple ID on an iPhone).

  This means that it is not as Mail where are read from the server and in the case of a POP account you can choose to let the "message" on the server if other devices can read.

  IMAP accounts will be synchronized as you say but POP will be more like the Messages app with iMessages.

  The iMessages which is addressed to you are marked by the number of devices is in the opportunity to see it.

  He pushes the devices until they respond (Accept) once this device has accepted it is removed from signage and only devices that did not have a chance on seeing.

  There is a time limit on how long the iMessages is pushed to a device (such that being away from your Mac turned off everything on vacation or phone that died or was out of range of the carrier)

  Once the device have the iMessages it is removed from the server.

  A simpler view is that the iMessages is "copied" and sent to each device and that each device can not see the other "versions" and that each "copy" is deleted from the server that happens on the device.

  The news to "read" your comments, you might see comes that of the device, it was intended to (i.e. addressing a number only the iPhone to another end may, so together, to send the reply 'read').

  Same thing with sent.  This is why you get a response, when he showed even "Delivered" as someone can answer from a connected device.

  This means that the 'Sync' is really only show on all devices and nothing do you on one device will be the effect of the other.

  It is not broken, even if this isn't what you think that told you about the device.

  You can tell them http://www.apple.com/feedback/messages.html

  

  20:31 Saturday; October 1, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• I have an iPhone 6 and get this message. Continue coarse iCloud on this iPhone approve him to one of your other devices using iCloud or enter your iCloud security code.  I don't know my security code and only have my book of power with me.

  I get this message on my iPhone 6.  To continue using Icloud on this iPhone, do agree with your other devices using iCloud or either your iCloud security code.  I don't know my security code.  I have my book of power with me how check my iPhone 6.

  Mike.

  Hello

  For checking your apple iphone should send you a massage to your other device

  With a code.

  See you soon

  Brian

• How can you unlock or implement an iPhone without a sim card

  How can you unlock or implement an iPhone without a sim card & apple computer laptop?

  You need a SIM card, and if the phone is locked to a carrier, the SIM card must be that carrier. It doesn't have to be an active SIM; It may be one that has been disabled. You don't need a laptop Apple; You can activate Windows 7 or later, or Mac OS X 10.7 or higher.

• How can I reformat my laptop?

  I have a FUJITSU SIEMENS laptop... How can I reformat my laptop? CAN YOU HELP ME PLEASE?

  I have a FUJITSU SIEMENS laptop... How can I reformat my laptop? CAN YOU HELP ME PLEASE?

  Today, most units come with a partition.which recovery are accessible by one of the F keys during startup. In addition to this, some are available in the windows recovery environment. After a take-over of the factory all the drivers and applications of origin are there when the procedure is finished. Search the site of fujitsu for the exact procedure for your model, or if you like to give me the model and I can find documentation.

• How to format computer acer laptop?

  How to format computer acer laptop? Had only "backup" acer erecovery discs and no original cd of vista when I bought my laptop.

  My phone is updated with all microsoft updates before that. Problem occurs when I got the blue screen. I rebooted and then I had a black screen with blinking cursor after the "PRESS F2 TO enter SETUP". Downloaded the neosmart vista recovery disk but no help. Startup Repair does not work and I also tried "restore from a good starting point" to end up having the same screen with the cursor. "

  Recovery disc neosmart vista I tried to spend in the command prompt and run a virus cleaner and it detected TDSSMBR. SM as a virus in the partition c: and cleaned. After that I tried restarted and after the "PRESS F2 TO enter SETUP" had a black screen then "missing operating system".

  I tried using "neosmart vista recovery disc" and execute "Startup Repair" and it detected problems and that fixed it. Then restarted and even a black screen with "missing operating system".

  Then I got my "acer e-recovery of a disk" and reinstall to factory settings. I noticed that it is installed in 2 disc/directory partition.  Once this was done, I rebooted and got the same black screen "missing operating system".

  Then you can someone pls let me know how I format my computer acer laptop (detailed instructions please) as I am not very irritable of mind.  All I have is the "acer erecovery discs. Once I have the format that I can use the "acer erecovery discs' reinstall to factory setting? By the way, my laptop has 2 hard drives, or at least I think that it doesn't. C: and the other e: is there a way to check wherether I have 2 hard drives or only one. Vista has been on the c:
  Thank you

  How to format computer acer laptop? Had only "backup" acer erecovery discs and no original cd of vista when I bought my laptop.

  My phone is updated with all microsoft updates before that. Problem occurs when I got the blue screen. I rebooted and then I had a black screen with blinking cursor after the "PRESS F2 TO enter SETUP". Downloaded the neosmart vista recovery disk but no help. Startup Repair does not work and I also tried "restore from a good starting point" to end up having the same screen with the cursor. "

  Recovery disc neosmart vista I tried to spend in the command prompt and run a virus cleaner and it detected TDSSMBR. SM as a virus in the partition c: and cleaned. After that I tried restarted and after the "PRESS F2 TO enter SETUP" had a black screen then "missing operating system".

  I tried using "neosmart vista recovery disc" and execute "Startup Repair" and it detected problems and that fixed it. Then restarted and even a black screen with "missing operating system".

  Then I got my "acer e-recovery of a disk" and reinstall to factory settings. I noticed that it is installed in 2 disc/directory partition.  Once this was done, I rebooted and got the same black screen "missing operating system".

  Then you can someone pls let me know how I format my computer acer laptop (detailed instructions please) as I am not very irritable of mind.  All I have is the "acer erecovery discs. Once I have the format that I can use the "acer erecovery discs' reinstall to factory setting? By the way, my laptop has 2 hard drives, or at least I think that it doesn't. C: and the other e: is there a way to check wherether I have 2 hard drives or only one. Vista has been on the c:
  Thank you

  Hé neww

  NeoSmart disk is to startup etc repair not reinstall

  the process of acer administers the process of full recovery to the standards of the factory

  you start from the acer recovery disk to start a reinstallation of vista, back to factory standards and follow the prompts

  problem with the acer recovery process, you will need to contact acer

  It's their recovery process

  http://www.Acer.com/worldwide/support/index.htm

  Walter, the time zone traveller

• How can I add my laptop to the network and connect to the internet as well

  I have internet access on my computer at home, the ipod, the ipad and iphone.  How can I add my laptop to the network and connect to the internet as well?

  Hello

  I suggest you to refer to the following Microsoft article and check if it helps.

  Add a device or computer to a network:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

  For more information, see the following Microsoft article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-you-need-to-set-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows/explore/home-networking

  Hope the information is useful.

• How do I fix my laptop to connect to my wireless router?

  How do I fix my laptop to connect to my router wirelrss?

  Hello

  Check with the router manufacturer, their online documentation and forums support (if any). Most have
  excellent tutorials online. The router must be configured before connecting to it.

  -----------------------------------------------------------------------------------------------------------------------------------

  More troubleshooting:

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">