How to convert an old windows 2000 virtual server?

Similar Questions

• Old Windows 2000 (!) comments

  I have an old Windows 2000 Server VM comments.

  I need to enlarge a virtual HD 200 GB.

  I have expanded the virtual HD but I'm unable to enalrge partition, ad diskpart does not resize a partition basis.

  Can someone suggest an alternative?

  Concerning

  Marius

  Hi guy,

  on Windows 2000 and 2003 servers the Dell ExtPart utility can be used to extend a basic disk.

  You can download it here: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R64398

  -Andreas

• How to activate the old Windows XP with new serial numbers?

  \How to activate the old Windows XP with new serial numbers?

  You use a retail disk you had?  If so, then the keys do not work due to the fact that they keys of volume.

• How to convert an old PageMaker 7.0 file (2006) to a *.pdf file?

  How to convert an old PageMaker 7.0 file (2006) to a *.pdf file?

  Do you still have Pagemaker 7? If this isn't the case, you have InDesign (which may or may not be able to open the file)?

  You first have to open the file. Even if you do, you will need something to convert the file to PDF. Adobe Acrobat Reader can not do.

• OpenManage Server Administrator on Windows 2000 Advanced Server

  Hello

  When I try to install server administrator on a Windows 2000 Advanced Server 5.4, I get this error message:

  "The prior audit tool reported a failure for all the features. Installation cannot continue. »

  No idea what this means?

  Thank you very much.

  Kind regards

  Eric

  
  

• network card for windows 2000 advanced server

  Dear forum,

  Is the type of network E1000 has not quite with WIndows 2000 Adv Server SP4.

  My ESX Server is also 4.0 Update 1 and VCenter.

  Thank you...

  Flexible will be the choice for W2K

  http://KB.VMware.com/kb/1001805

• How to convert the hierarchical query of SQL Server (CTE) to Oracle?

  How to convert the hierarchical query of SQL Server (CTE) to Oracle?
  
  WITH cte (col1, col2) AS
  (
  SELECT col1, col2
  FROM dbo. [tb1]
  WHERE col1 = 12
  UNION ALL
  SELECT c.col1, c.col2
  FROM dbo. [tb1] AS c INNER JOIN cte AS p ON c.col2 = p.col1
  )
  DELETE one
  FROM dbo. [tb1] AS an INNER JOIN b cte
  ON a.col1 = b.col1

  Hello
  Something like this maybe:

  DELETE FROM dbo.tb1 a
   WHERE EXISTS (
    SELECT 1
      FROM dbo.tb1 b
    WHERE a.co11 = b.col1
        AND a.col2 = b.col2
     START WITH b.col1 = 12
    CONNECT BY b.col2 = PRIOR b.col1)
  

  Although you need to do here is to check that CONNECT it BY SELECT, returns records you wait first, then the DELETION should work too.

• How to convert the old sync key (12 characters, no dashes) to the new sync key (31 characters, 5 dashes)?

  My sync key was of 12 characters, no dashes (xxxxxxxxxxxx). After uninstalling and reinstalling FF 3.6.13, Sync 1.6.1 refuses my sync key to 12 characters.
  I discovered, that the keys of synchronization for all users have been activated to 31 characters including 5 dashes (x-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx). How can I get the new key for synchronization?
  I have no PC connected to Firefox Sync more but Firefox Home and 360 browser on my iPhone successfully sync. Unfortunately on the iPhone I can't display the sync currently used key. Is there a way to convert the old key to sync to the new?
  I need the bookmarks saved in my sync account.
  Thanks for your help!

  I had the same exact symptoms as you did. Here is my solution:
  I installed an older version of firefox sync (1.4.something, I think) and then added my account using my old short firefox sync key. When you try to synchronize, the out of date addon says to do synchronization, it must be updated. After update, I always signed, but now had the additional device to see my new long firefox sync key that was compatible with FF 4 b, etc. Everything works fine now and my computer is properly synchronize.

• How can I remove old windows

  How can I remove the old ones, apart from the windows command prompt

  Hello

  This should help you (for Vista and Windows 7).

  You use disk cleanup

  "How do I remove the Windows.old folder?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-remove-the-Windows-old-folder

  See you soon.

• With the help of old Windows 2000 laptop. Some of the keys by typing numbers instead of letters

  Original title: Sub-cles in Windows 2000

  I have reactivated a portable windows 2000 pro. I find that some of the keys produce a number rather than the letter, as 6 instead of o. That's if for a long time that I have used W 2000 I forgot how to reset the keyboard to letters only.

  In fact, this is not a function of Windows (2000 or another). It is a function of material of your laptop that remaps several keys to duplicate a NUMPAD on a smaller keyboard. In general, the feature is enabled or disabled with a Fn + NumLck key combination or (more rarely) a button dedicated to the NumLck .

  Not knowing the make/model of your real hardware makes it difficult to be more specific.

• How can I delete old windows files that seem to occupy a large part of my hard drive. I use Vista Home. I have reininstalled OS but only saved the files I never cleaned up old windows.

  I use an older Dell that was handed to them. There are several problems with it and I finally reinstalled winows vista home and worked my way through the updates. Now, the system works well for me but the hard disk is almost full. When I look at the pie it shows post-colonial windows most of the space. I think I should remove the old windows files. Any help? Thank you.

  Hello

  How to restore your personal files from the windows.old folder after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  and here's how to remove

  http://www.Vistax64.com/tutorials/240390-Windows-old-folder-delete.html

• How to convert a template to a virtual machine?

  Hi all

  I need to convert a template to a virtual machine, but I can't use VC since he is an independent ESX host in a laboratory. How can I do?

  Hello

  According to me, all you have to do is log on to the host ESX (ssh), go to the store local vmfs, and then to the location of your model. Change the extension of the .vmtx in there in .vmx file

  Concerning

  Leafy911

  (Do not forget that you receive points you award points)

• How to recover the old window "downloads"?

  I liked the old window with 'Download' more and I want to get it back.

  Sorry, but this dialog box has been removed. Could someone create an add-on to simulate it, but I haven't heard one yet. In the meantime, if you press Ctrl + j or click Show all downloads, you can see the list in the Download Library dialog box.

• How to develop a player for the virtual server when no more space is available on the data store?

  Hello

  I have a 'vSphere4.1 - Intel"cluster with lots of available data stores.

  In this group, I have a virtual server "Windows Server 2003 Enterprise Edition SP2" with 7 discs, all with the ' base' type in the server disk management. ""

  One of the drives needs to be expanded, but in my VMware environment, I noticed that the data with the reader store, cannot be stretched beyond, so I need to take the free space of hard drive to another store of data with free space desired.

  Now to my question:

  Can I make a new record in my VMware environment on another data store and fix it on my Windows 2003 Server? - And if so, how do I add the new free space on the server specific hard drive?

  Kind regards

  Carl-Marius

  1. close the virtual machine in question

  2 remove the HARD disk that you want to extend

  3. in another data store make folder and move the VM HDD (vmdk) in this folder

  4. now change the settings on the virtual machine, add need HDD now this time, select "use the hard disk" option and point to the VMDK file in the other data store

  5 - turn on the virtual machine, check that every thing is okm if ok you can do the HARD disk as dynamic disk is easy to expand

  6. now incerase the VMDK from vsphere client,.

  7 now, with the help of utilities such as partition magic or acronis or utility, you can extend the player

• How to see the models VI3 on Virtual Server 4.1

  Hi all

  I'm migrating my old infrastructure VI3 (ESX3.5U5) to a new vSphere 4.1 a.

  That I create a new database on V4.1 I have to disconnect all virtual Center2.5 ESX3.5 to connect tp Virtual Server 4.1.

  I have a lot of templates on each ESX3.5 but when I reconnect the ESX3.5 to the Virtual Server 4.1 I don't see all of my models.

  Any idea?

  TKS for your help.

  If you browse data warehouses using the browser to store data, you should find all your models here.  Once locate you them, right click on the .vmtx file and "add to the inventory.

  For an overview of all models 'zombie', you can use RVTools (tab Vsante)