How to copy "c" for the largest hard disk drive?

Similar Questions

• Bit locker encryption unlock Wizard does not, how can I open a partioned encrypted hard disk drive that is not responding?

  Original title: How can I open a partioned encrypted hard disk drive that is not responding?

  I was copying somtin in my partition of my hard drive... then my pc froze... then after I rebooted the system and tried puttin my password to unlock my encrypted partition on the hard drive, it keeps hangin' and saying "bit locker encryption unlock Wizard is not responding..."pls I need help on how to access the partition encrypted without formatting as soon as possible... Thank you

  Hi codjovi,

   

   

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Follow the steps described in the article below

   

  How to use the BitLocker Repair tool to help recover data from a volume encrypted in Windows Vista or in Windows Server 2008

  http://support.Microsoft.com/kb/928201

   

   

• I need the driver for my external HARD disk drive

  Hi how are you?

  Well, I would like to know I do an external drive using the portable hard drive whose name is "Toshiba MK8034GSX" which is with a capacity of 80 GB.
  A few days back I plugged to the USB port with my pc but after that it says need driver and I n t have the HARD disk driver.

  So kindly if anyone has the driver or know the link where I can find the driver then tell me I will be very grateful to you all.

  With regard to:

  Martine André

  Hello

  What is a USB HDD?
  You n t need any driver, and there is no drivers for an external USB HDD.

  The USB driver is part of the Windows OS and it s already installed.
  The USB HDD must be fitted with a plug & play device which means that should be recognized automatically after you connect to the laptop USB port.

  What OS you have and what laptop is it?
  The operating system is up to date?
  USB ports are correctly listed in the Device Manager?

• Best replacement for HITACHI_DK23EB-40 HARD disk drive

  Hello

  I have a DELL Latitude C840 of 2002, which is equipped with a HARD of HITACHI_DK23EB-40 (40 GB) drive.

  The laptop worked fine except lately there have been serious buzz the internal drive of Hitachi.

  I guess its time to replace this drive. So, I'm looking for a new drive for replacement for this drive.

  What are my options for the new HARD drive?

  Thank you

  Avinash

  Age has nothing to do with a failure of the drive.  However, if you have money burning a hole in your Pocket , almost any laptop IDE drive (2.5 ") will not work. Micro Center is a decent number of IDE disks. EBay is another place.

• Is Satellite X L855-10 supports a Bay for a second HARD disk drive

  10 - L855 X have an empty slot to add the SSD drive, without removing the current HARD disk?

  Hello

  In my opinion, the 2nd HDD or SSD disk is not supported.
  You can use the HARD drive, or you can try to replace with a compatible SSD 1 TB HARD drive. But the use of HDD and SSD drive to one and same time is not possible.

• w540 replace the cd for a second hard disk drive?

  Hello

  I ordered the thinkpad w540 last week. With a dirve normal hard drive and a CD compartment. I figured out after the arrivied to the computer I got a solidsate inside my xps 15 hp.

  In the best of cases, I would replace the CD drive, as says the config in the web page in timeline option could be done. How could I know if it is possible to replace the CD player with another hard drive?

  Otherwise I would try to replace the original disk for the solid state hard drive, but in this case I loose windows system 8. Is is possible to install again in the new hard drive with the same license?

  I was wondering just because it would be nice to keep the drive inside your computer instead of having to plug it in all the time, due to the faster speed, it would be good to use is as the primary dirver.

  Thanks in advance,

  -Jorge

  Hi, Jorge

  you will need an adapter "caddy" to house the second HDD/SDD. Ch right here in the forum, see http://forums.lenovo.com/t5/forums/searchpage/tab/message?location=forum-board%3AW_ThinkPads&q=caddy... .

  For my W540, I use the caddy of http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=555 and have a very good experience over the years (W510, W520, W540...).

  Regarding replace drive HARD original with SSD, there are basically two possibilities - either you use the recovery option (create your own media - see google or trying to get a Lenovo - not sure it will work) or use a transfer software. I have used for years Acronis products, especially because it acknowledges the SSD and aligns everything as it should on SSD (won't go now too deeply in the alignment of industry and to this day).

  And if you want to run your W540 on steroids, alias max possilbe storage capacity, see my signature...

• M800: How to add SSD (for an existing HARD disk)

  Hello

  I currently have an old Thinkpad T400 having an SSD inside. The SSD has been installed there maybe 2 years ago, but now I'm upgrading to a desktop M800. I ordered the M800 with cheaper hard drive with the plan to migrate my current SSD in it. But I was wondering if there is a procedure that I follow for what happens once the hard drive is physically installed. Is there a document somewhere online or an easy way for all it? Or is it more like a recovery by using the tool of Windows Media and then comes the installation of Windows on the SSD and then go online and start to download drivers one by one?

  Thank you

  Horace

  MOD: edition line object for the type of system and to clarify the issue

  Horace wrote:

  Hello

  I currently have an old Thinkpad T400 having an SSD inside. The SSD has been installed there maybe 2 years ago, but now I'm upgrading to a desktop M800. I ordered the M800 with cheaper hard drive with the plan to migrate my current SSD in it. But I was wondering if there is a procedure that I follow for what happens once the hard drive is physically installed. Is there a document somewhere online or an easy way for all it? Or is it more like a recovery by using the tool of Windows Media and then comes the installation of Windows on the SSD and then go online and start to download drivers one by one?

  You order your M800 Office with the 2nd disc vacuum hook pre-installed blue plastic?  If so, you just take your SSD 2.5 "of the T400 and wrap clamp empty blue plastic delivered by the M800 around it and put back the final cut in the 2nd cage of readers of the M800.  Now, he is physically installed.

  Then, since the two physical disks are now available at the same time and the M800 with HARD drive spinner delivered will be Win7/Win10 pre-installed on the HARD drive cone, you can simply use Macrium reflect free (or similar product) installed in operational windows from the spinner of HARD drive to clone windows delivered pre-installed HARD drive spinner on to the SSD.

  Then re - start and stop to enter the configuration of the BIOS of the M800 utility and change the start-up boot sequence to display the SSD as the first drive hard (you can exclude the spinner of the disk in the list, since you are not going to use it to start again).  Save and exit the BIOS Setup utility and re-boot, which should take place now of the SSD (running the provided Lenovo delivered Windows that you just cloned from the spinner of the HDD to the SSD).

  You should now be initialized and operational of the SSD, and you can confirm that the SSD should be C and other partitions (on the spinner HDD) D and higher.

  Now, you can use Partition Wizard free to remove all partitions on the HARD drive, to re-purpose spinner it as a 2nd disc of 'data '.  You can also then Partition Wizard allows you to create new partitions on the HARD drive cone that you can use for anything you want (for example to perform backups regular image/data from SSD to target folders on the spinner HDD backup).

  There is really no reason to "start from scratch" installation of Windows on a target freshly wiping SSD and then having to download/install all drivers provided by Lenovo and software for the M800.  Why waste your time?  Just clone the delivered spinner of the disk HARD Windows through to the SSD, delete the contents of the Pan from HARD drive, create 'data' or the partitions on the HARD drive cone and use it.

  You now have a work M800 2 discs (with additional 'data' or the partitions on spinner SSD or HARD drive).

  As you probably know, there are some Windows features (for example "weekly defrag") that should NOT be run on an SSD, even if they are enabled by default on a Windows HARD drive spinner.  If you install Windows from scratch on an SSD, these would have been auto-optimisé to you by the Windows Installer, but this is not how you got here (since you used the spinner provided by Lenovo Windows disk cloning).  So when you clone HARD drive spinner Windows more SSD you must then manually "twist" a few things in Windows to optimize performance specially for SSDS.

  Just a quick search online for "optimize Windows for SSD" will give you the standard set of tweaking recommendations accepted.  There will be differing opinions, but the important thing here is that your cloned windows now running on the SSD was initially installed on HARD drive spinner, no SSD, so automatically installed SSD optimizations were not initially defined.

• Restore files deleted to new destination OR change the name of the external hard disk drive

  I deleted a mass usb (external hard drive) storage file that was installed in the F: drive at some point when pluging this backinto PC hard drive it has become the E: drive.  I want to restore the files removed from the Recycle Bin, and when I click on restore it tries to restore to former F: is not currently being used.  How can I restore to a different location or drive OR how to make the system to recognize the external hard drive as drive F: and not drive E:

  Hi Cschnell,

  I suggest you open the Recycle Bin and drag and drop to the desktop or your favorite place.

  You can also see the article for more information:

   

  Recover lost or deleted files

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

  I hope this helps.

• Impossible to assign the external hard disk drive letter

  Original title: external hard drive

  put an external hard drive on my hp 630 7 victory, I hooked an external h.d. off a dell desktop comp. and it manifests under disc mng. but I right click and I can't assign a letter... just shows 'change in dynamic disk' or 'offline' or 'help'... What do I do?  been monkeying around trying things and I have noticed in the global disk when I looked that hard drive is 100% free in two partitions... as it does not appear in the page comp. so I go to disc project and then make a right click and when it shows a volume is deleted, what should I do, that make a difference in formatting so I can assign a letter of

  Hello Charles,

  Please contact Microsoft Community. I appreciate for all the research you have done.

  I can understand the inconvenience caused, be assured that we are here to help with your concern.

  This problem can occur if the hard disk is not formatted.

  Method 1:

  I suggest you refer to her below links to format the hard drive and then try to assign the drive letter for the drive and check if it works.

  To format the hard drive refer to the article.

  http://Windows.Microsoft.com/en-us/Windows/create-format-hard-disk-partition#create-format-hard-disk-partition=Windows-7

  To assign driver letter refer to the article.

  http://Windows.Microsoft.com/en-us/Windows/change-add-remove-drive-letter#1TC=Windows-7

  Important: Formatting a volume will destroy all data on the partition. Be sure to back up any data you want to save before you begin.

  Note: You can check out the link below to see how you can back up your files.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Note: If the problem persists, continue with method 2

  Method 2:

  Enables or disables the automount feature. When enabled (default), Windows automatically get the file system for a new basic volume or dynamic when it is added to the system and then assigns a drive letter to the volume. Please follow the steps below to enable the automount feature,

  1. Open the Start Menu.
  2. Type cmd in the Search box.
  3. Right click on cmd and click run as administrator.
  4. At the user account control prompt, click Yes .
  5. Type diskpart and press enter.
  6. Type automount enable and press enter.
  7. Reconnect the external hard drive and check the issue.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• Lightroom 5, letter from the external HARD disk drive

  I use LR 5 and store my images on an external drive 'f' raw Once I inserted an SD card on my PC from Win10, and he received the letter F on the SD drive. Later, when I connected my external drive where I store my raw, the PC files it G. Since then, I am unable to get LR5 to locate photos. I went into disk, reassigned management to F the drive letter for the drive external hard, then back to G since LR5 thought he was now drive G. other than the location manually each individual records, seems to have no other choice. Any help would be appreciated

  The simplest solution is to use disk management to reassign the external drive the desired letter.

  My recommendation is to choose a letter 'J' so that readers SD or other do not continue to change the letter on you.

  After that you have the letter assigned, go to Lightroom file Board.

  If the folder hierarchy does not appear as it does explore, right click on a folder and select 'Show the parent'. Repeat if necessary.

  Then 'move' the first folder on the drive with the new letter. Everything under this first file will be automatically updated.

• Store.E TV + - copy files from the USB HARD disk

  I have Stor.E TV +, and I'm trying to copy the data from my stick of fash of the USB device on my hard drive without using a computer. I can find the files and the destination, but I can't copy them.

  Any help?

  Hey,.

  I put t think you can copy between different mediums using Stor.E TV + without a computer. I checked the user manual and I found the following information on the USB device:

  USB device
  In this menu, you can browse the external USB device content. Press OK to confirm. If no USB device is connected to the USB port, there is no record of USB device shown.

  So I think that you can browse on USB stick and view/open files but not copy.

  What do you think?

• HOW TO UNLOCK "D" BY WINDOWS XP HARD DISK DRIVE

  I've locked drive "D" by the software that the name is "easylockdrive" after I tried to unlock it by this software, but failed, now any body please tell me how to unlock drive "D" in windows xp

  I have windows xp professional, version 2002

  Please tell me the process in my email that how to unlock "D"hard drive (WINDOWS XP professional)

  My mails are... (* E-mail address is removed from the privacy * * E-mail address is removed from the privacy *)

  Thank you

  "Nazheer.khan" has posted this question at least three times and received the answer that he must check with easy Drive Lock tech support people. I also gave him a link to a thread with many fixes for this issue. He has not been assigned to one of these threads.

  "Nazeer.khan" - read my earlier answers, stop this posting over and over again. Do as previously suggested or with the machine to a local reputable professional who will be able to do it for you.

  MS - MVP - Elephant Boy computers - don't panic!

• Can I install Vista on the new hard disk drive recovery?

  Hello

  I'll have to replace the hard drive of my laptop Satellite A 200 and have only a drive with her recovery. I'll be able to install Vista on a new hard drive for him?

  Thank you

  Post edited by: xaver

  Of course, you will be able to do.

• assign the external hard disk drive letter?

  How to assign the drive letters of external hard drives?

  Done Windows that after connecting the HD, turn it on.

  There must be a valid and formatted file partition before he gets a drive letter.

  Disk storage/tools/Control Panel/Administrative management control

  -steve

• Can not change the external hard disk drive letter.

  When I (R) click on the drive that I want to change the box that appears is all grayed out and you can just click on the help line. How can I change this so that I have all the choices available in the box? While I can click on change drive letter.

  When I (R) click on the drive that I want to change the box that appears is all grayed out and you can just click on the help line. How can I change this so that I have all the choices available in the box? While I can click on change drive letter.

  seems apparent question is already answered here... Follow the troubleshooting steps

  http://www.SevenForums.com/general-discussion/39481-cant-change-hard-drive-letter-needed-letter.html