How to copy / paste on an audio track with PP CS6

Similar Questions

• How to cut audio tracks with tool blade?

  Hello

  I recently made the switch from fcp7 to fcpx and I'm having a real hard time! There are many things that I can't understand how to do, and it's just one of them:

  Solo Cup audio tracks with the blade tool (or another medium, if there is). Can I cut the audio clips on one side, but how I cut a piece in the middle of the clip?

  Thank you!

  YYou can't cut with the blade tool? Or select it, and press Cmd - B of type point skimmer/reading

• Cannot find specific instructions "how to copy / paste" or "copy / paste".

  Title: cut/copy/paste original

  Cannot find specific instructions "how to copy / paste" or "copy / paste".  I learn basic pc skills.  He said it was simple, but nowhere can I find instructions on this simple function.

  Cannot find specific instructions "how to copy / paste" or "copy / paste".  I learn basic pc skills.  He said it was simple, but nowhere can I find instructions on this simple function.

  http://www.bleepingcomputer.com/tutorials/tutorial95.html

  How to cut, copy and paste

  Above is a very good tutorial on how to cut, copy and paste.

  See you soon.

  Mick Murphy - Microsoft partner

• How to copy & paste several items at once?

  Original title: copy paste &

  I'm sorry if I ask this question in the right place. How to copy & paste several items at once? Recently, I learned how to copy & paste, which will give you an idea of my level of skills.  Thanks, Jim

  What you're trying to copy more than one? If you want to copy a few files or pictures for example, hold the Ctrl key and click on each one to highlight and then right-click | Copy all copy.
   
  To copy the contents of a folder, highlight one and Ctrl + A will highlight everything.
   
   
   

• Can I copy and paste to an audio track?

  I have a nice clip of ducks swimming peacefully, but there's a barking dog that I would like to delete. I'm looking at the item in the selected monitor Source with Audio Waveform Show Panel. If I could just copy a section of the waveform with the 'white noise' to the pond that surrounds the "Barking Dog" then paste on the dog that barks would fix it. Is it possible to do first?

  You copy an audio section in a new audio track and the position where you want then mix you them together.

  Generally better to go back to the audio source and set output points and overlay / / insert what you want.

  Audio is better multi layers so that you can mix/mix using handles.

• How can I do a synchronized audio track matches the length of the clips selected in a seq multicam?

  I have a continuous multicam sequence about 13 minutes containing a master audio track synchronized, registered separate microphones. I want to rearrange the scenes of her in my final sequence, but when I select a range of clips to nest the length of audio is pasted in the new sequence. I want to cut off the audio signal to match just the clips I have chosen but not synchronous. Is it possible to do or is nesting not how to cut out a sequence and reorganize the scenes in there?

  Thank you.

  Mike

  No prob.

• How to copy/paste the text box anchor to its anchor text and remove all checkpoints empty?

  Hi all

  I have a document of a few pages, but a story. The right column is the area of main text and on many places, anchored text boxes are placed which appears on the left column, as shown below.

  I want the text of each text box anchor to cut of his place and sticking to its point of insertion/anchor and remove all of the empty boxes of anchored.

  I'm trying since this morning but I was able to get the anchor object reference. Any help on how to start with will be useful.

  Marie rosine

  

  OK, let's say you have a main text (not rooted) box and three text boxes that are anchored to the text it contains. One is anchored with text, the second is not anchored and the third argument is empty (I won't get into the anchor vs custom anchor line given that you mention in your message).

  Scroll us through the items on the page:

  function main(){
    var myDoc = app.activeDocument;
    var myPages = myDoc.pages.everyItem().getElements();
    for (var i = 0; i < myPages.length; i++){
    {
      var myPage = myPages[i];
      //Checks that the page is valid, and that it is not a master page. If either is true, skips to the next page.
      if (myPage.isValid == false) continue;
      if (myPage.parent instanceof MasterSpread) continue;
      var myItems = myPage.allPageItems;
      for (var j = 0; j < myItems.length; j++){
        //Current item.
        var myItem = myItems[j];
        //If myItem doesn't have a Character parent, it is not anchored.
        //The first and third text frames would fail this test.
        if (!(myItem.parent instanceof Character)) continue;
        //We only care about text frames.
        if (!(myItem instanceof TextFrame)) continue;
        //I think the only way this would happen would be if you had an image or
        //something else unexpected within the frame. I check for it so no content
        //is inadvertently lost.
        else if (myItem.texts.length > 1) continue;
        //If we're still in this iteration of the loop, all qualifications are met.
        //Flatten the text frame.
        //I don't use layers that often so, to me, flatten makes sense. You may want
        //to use a different term if there's a chance for confusion.
        flattenItem(myItem);
       }
     }
  }
  
  function flattenItem(funcItem)
  {
       //Hold onto the anchor character.
      var myParent = funcItem.parent;
       //Duplicate the text from within the frame so that it appears right after the anchor.
       //There may be other methods, but this works for me. I try to avoid copy/paste
       //so as not to deal with any clipboard mishaps. I added a check in case of empties.
       if (funcItem.texts.length > 0){funcItem.texts[0].duplicate(LocationOptions.AFTER, myParent.insertionPoints[0]);}
       //Replace the anchor character itself with a space (or whatever) which also
       //deletes the text frame it was anchoring.
      myParent.contents = " ";
  }
  

  I guess the takeaway is perhaps you aren't looking at the main text block and then check if anything it is anchored. You are watching each text block and find out if it is anchored. That's my approach, anyway.

• How to: remove the scenario-specific audio tracks?

  I just CS3 where in the source of the window had a toggle audio, video, audio, which allows you to apply just audio (if that's what you want) by using the insert/overlay.  CS5 seems now that he has separated these buttons and were not able to understand how to switch only audio or video only from the source.  I know I can recover the source video or the sound icon and drag it into the timeline, but it can be faster by using the insert/overlay.

  My questions are:

  -How to select only audio or video of the source monitor for use with overlay/insert keys?

  -When you work with multi-track audio containing source material, is it possible to select specific securities to slide on the timeline without dropping everything down?

  The "buttons" on the left of the timeline panel in the information header/track area are the source and target range selectors. You use them together to enable or disable specific tracks from a source element and to direct these incoming securities in specific titles in the sequence.

  

  The "buttons" on the left (in this example) labeled V and A1 are the tracks contained in your source clip in the source monitor. Depending on the nature of your source footage, you will have between 1 and 4 audio tracks, that you can select. You will always have a track V (video), however. Click them to toggle these sources on or off for an insert or overlay Edition, and dragging them upward or down to target what destination track, you want to modify it to be placed in.

  At the same time, you must enable or disable the target tracks so that the change to happen the way you would expect. They are the right marked "X Video" and "Audio X" buttons. You can turn on all, any, or some of those securities and have different effects. The simple story is that, if you want the tracks from a source item to be edited in a set of tracks specific targets, the selector buttons must be "enlightened" to indicate the tracks are on and targeted.

  Here's an example, using pliers DVCPROHD with four mono tracks:

  

  In this case, if I had to make a montage by inlay, the video source ('V') will overlap on the destination track Video 2, but it will edit also 'empty' on the destination track 3 video because I turned it on. For audio, I have traced Audio Source 1 to Target 2 Audio, 2 Audio Source to target Audio 1, Audio audio Source 3 target 4 and even if the Source Audio 4 is 'turned on' it has no effect because the target Audio 3 'stops.' In this way, you can target selectively tracks are made during an insert or overlay edit, using the commands insert and embed in the monitor Source or Bin. Note, however, that this choice has no effect when you drag a clip from the Source monitor or the tray; in this case, all THE source Flickr photos will be displayed in the order, but you can position them to some extent by pressing the Shift key once you place a portion of the clamp and slide it across to the demarcation line between the video and Audio tracks.

  The target range selectors affect also, whose securities are the subject of chronology, as 'razoring. operations

  I hope it helps a bit. The best bet is just to play with it; It takes a while to wrap your head around, but will make sense after a little exploration.

• How to copy - paste to put in another document

  I used to be able to respond to an email and it show up under the box. Then I could add my comments to this announcement with the original mail in it. Now it don't.

  Also, I used to be able to go on a site a cut-and - paste or copy - paste to put in my document.

  Now I can not do. Can you please give me some advice because it's totally frustrating.

  See also:

  • RightToClick: https://addons.mozilla.org/firefox/addon/righttoclick/
  • Disable Clipboard manipulation: https://addons.mozilla.org/firefox/addon/nocopypaste/

• How can I change / remove the first seconds of the view / specific part of an audio track in Premiere CS6?

  It is very difficult to accomplish.  Is it possible that I can do the biggest wave form?  I want that its not let me cut the specific part.  Its always keeping first frame or two

  Make a zoom in on the timeline with the navigation bar or the scroll wheel and also make her taller audio track by scrolling in the header.

• How a copy paste a text layer of the file one psd to another?

  Hello

  CS6

  I select the type tool, type some text, create a text layer.

  I went with this still active text layer, ctrl a, selection puts on the perimeter of the entire image, ctrl c (copy) and clicked on the psd file tab I wanted to put it in and went ctrl v (paste)

  text appeared.

  HOWEVER... This isn't text, try selecting the it, you can't!

  To the search, in the layers palette, it is not not a text layer as it was in the psd source.

  going on what?

  I copy paste on this occasion, not drag drop.

  Merlin

  Instead of copying the pixels (what does your process) instead do a right-click on the text layer - select «Duplicate layer...» "and where it says - Destination - click on the dropdown next to"Document"and the change to the file that you are trying to move the text to.

• How to copy paste an excel file to direct the PDF using a software or a command

  Hello

  I often use the excel and pdf file apparently, I need to open two files at the same time, I do just calculation in excel file and paste directly into PDF file.

  Please suggest me a software to use this utility.

  Please

  Hi Khateeb,

  You can use Adobe Acrobat DC, which provides you with the copy & paste feature mode Edit PDF or you can combine your Excel file with the PDF file.

  If you wish, you can try free trial 30 days of Adobe Acrobat DC Pro. Please refer to this link Download Adobe Acrobat free trial | Acrobat Pro DC

  Make sure you check the system requirements before downloading.

  If you have any other questions please let us know. We will be happy to help you.

  Kind regards

  Nicos

• How can I set up stereo audio tracks as default in first using the ProRes 422 codec?

  Forgive me if this has been asked several times before. I searched but can't find anything that explained in a language that does not require a degree in computer engineering.

  I'm a new convert to our beloved FCP 7. I'm learning to love dear first - but the audio part of this is driving me crazy.

  I exported from FCP files as ProRes 422 movies with stereo audio tracks. I want to put first in the same way. But when I do it all crashed in a single audio file.

  It plays havoc with the Pan - especially in mixtures which have a mix of stereo music. Apart from this it just confuses me.

  Also. When I create a new project from scratch in the first and I select the custom ProRes 422, this setting doesn't allow to ProRes 422 audio mono. I don't see a codec for something else (ie. stereo).

  Am I missing something?

  I looked in all areas of preferences and can not find anywhere to change this. I just want to import audio data from simple, basic two-lane (and let appear the same) that I would be in FCP, ProTools and the myriad of other editing programs that I use.

  I also want to be able to set up a base of two-way stereo timeline/sequence without having to reinvent the wheel.

  Thanks a lot for all the help and patience. I'm slowly pulling my hair and spend long periods sitting in the corner, hugging my knees and crying.

  My characteristics. Preferred codec installation: ProRes 422 codec

  First pro version CS6 (6.05)

  Thanks again.

  In the project Panel, select all the clips and rightclick/change/audio channels.

  Set it to 2 tack and mono.

  When you drop the clip on the timeline the stereo turns on two tracks.

  You can also set by default in the preferences under Audio (before you import the clips) (stereo to mono).

• How to copy / paste the Image

  I received a PDF file with an image only - no text.  I would like to copy / paste this image twice so that I find myself with three of the same image on the page.  Adobe TV makes it look so easy, but I noticed that there is an area of text around the image. The image I have is not in a box.  I can put a box around it somehow, or is there another way to copy and paste? Help, please!

  By copying and pasting an existing image in the same PDF are not really simple in Acrobat X. First, select the image with the selection tool, then right click and select copy the Image. Next, you'll need navigate to the comment pane and click the stamp tool. and select Paste the image to the Clipboard as stamp tool.

• copy paste doesn't work only with windows 7, office 10

  Copy / paste does not work in any office of 10 nor IE work or anything.

  I deleted the driver for my MS keyboard and re booted several times - nothing

  Not sure when this started, but it's been several months now.

  I tried sfc/scannow running, but that did not help either one.

  Any suggestions?

  Hello

  1. Modifications were made to the software or the hardware of the computer before the show?
  2. The problem is specific to the text copy and paste? Are you able to copy/paste the files in the folders?
  Method 1:
  Start the computer in Mode safe mode with network and check if the problem persists. See the link below and follow the steps.
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
   
  Method 2:
  Perform the check and the clean boot if this problem occurs. If the problem does not occur then determine the service that is causing the problem and consider to uninstall this application if you do not use. See the link below and follow the steps.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  Note: After you have finished troubleshooting follow step 7, mentioned on the web page for the computer to boot into normal mode.
   
  Method 3:

  Try to create a new user account and check what is happening. To create a new user account, please refer to the link below and follow the steps.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
   
  If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile