How to correctly initialize the CDotNetHandle

Similar Questions

• How to correctly record the ESXi 4.0 and vSphere Client for free?

  Hello everyone.

  Can someone help me with registration

  of free VMware ESXi 4.0? I am totally confused with the process I

  certainly do not understand.

  My goal is to install and use ESXi

  4.0 and manage via vSphere client with free licenses free of charge for

  more than 60 dayes. Is it possible?

  Installation of its products

  gone without problems, but failed to save. I found a few

  suggestion on other threads, but nothing helped. Give me a hand please,

  I will be grateful.

  I'll write what I did:

  1. I went to the http://www.vmware.com/products/esxi/ site.

  2. I read that I can get the free license for VMware ESXi 4 and VMware vSphere Client.

  3. Decided to download this software, registered and was redirected to
     the site where I could download iso 4 ESXi and vSphere Client .exe

  4. Installation and basic configuration of ESXi on the bare metal and vSphere Client Windows XP without problems.

  5. I am able to create virtual machines and use it - it's OK, but vSphere Client know that I have to the 60-day trial.

  6. Meanwhile I received the email with "Activate your VMware ESXi license".

  7. I have
     Click on the link in the e-mail and was redirected to the same
     the site, where I can download the software, but on the top of the web page I can
     find information and a 'ESXI licenses""this license key is valid.
     "for VMware ESXi 3.5 Update 2 and later versions. So I guess it's also valid
     for ESXI 4.0. I'm I right?

  8. I would like to record my ESXi 4 software installed and the vSphere Client. Of
     I chose the vSphere Client Menu: help - & gt; VMware on the web - & gt;
     Sign up for now. The site ask me "series/license number Activation".
     Code"so I typed the license key. Iassume that this license key should not be placed here, because the web site of replay that: "Code of Activation of series/license number has already been registered. So how do?

  As I wrote, I'm confused. How to correctly record the ESXi 4.0 and vSphere Client? What I did wrong and how to fix?

  To register the serial number in your ESX4i host

  Home-> inventory-> higher level (your ESXi host)

  Tab Configuration

  Left side - features licensed

  Edit-> Assign new key for this host-> Enter Key

  Paste your key

  Confirm all

  Your ESXi server is now fully licensed

  Note: you no longer have the basic features and all the enterprise features that came with a trial license are no longer valid

  Maish

  Architect of virtualization & Systems Administrator

  http://technodrone.blogspot.com

• How can I initialize the counter_ column with 1 every 5 rows

  How can I initialize with 1 again once the 'counter_' column every 5 rows on the following query?

  SELECT L.LETTER

  COUNTER_ ROWNUM

  FROM (SELECT "A" LETTER FROM DUAL UNION ALL

  SELECT THE LETTER 'B' FROM DUAL UNION ALL

  SELECT THE LETTER 'C' FROM DUAL UNION ALL

  SELECT WOULD BE ' LETTER FROM DUAL UNION ALL

  SELECT THE LETTER 'E' FROM DUAL UNION ALL

  SELECT THE LETTER 'F' FROM DUAL UNION ALL

  SELECT THE LETTER 'G' FROM DUAL UNION ALL

  SELECT THE LETTER 'H' FROM DUAL UNION ALL

  SELECT "I" LETTER FROM DUAL UNION ALL

  SELECT THE LETTER 'J' IN UNION DOUBLE ALL THE

  SELECT THE LETTER 'K' FROM DUAL UNION ALL

  SELECT THE LETTER 'L' FROM DUAL UNION ALL

  SELECT'M ' LETTER FROM DUAL UNION ALL

  CHOOSE "N" LETTER OF THE DUAL UNION ALL

  SELECT 'O' THE DOUBLE LETTER) L

  I need reach the result below:

  	LETTER	ROWNUM
  1	A	1
  2	B	2
  3	C	3
  4	D	4
  5	E	5
  6	F	1
  7	G	2
  8	H	3
  9	I have	4
  10	J	5
  11	K	1
  12	L	2
  13	M	3
  14	N	4
  15	O	5

  You can just use the MOD to do.

  with w_data like)

  SELECT L.LETTER

  COUNTER_ ROWNUM

  FROM (SELECT "A" LETTER FROM DUAL UNION ALL

  SELECT THE LETTER 'B' FROM DUAL UNION ALL

  SELECT THE LETTER 'C' FROM DUAL UNION ALL

  SELECT WOULD BE ' LETTER FROM DUAL UNION ALL

  SELECT THE LETTER 'E' FROM DUAL UNION ALL

  SELECT THE LETTER 'F' FROM DUAL UNION ALL

  SELECT THE LETTER 'G' FROM DUAL UNION ALL

  SELECT THE LETTER 'H' FROM DUAL UNION ALL

  SELECT "I" LETTER FROM DUAL UNION ALL

  SELECT THE LETTER 'J' IN UNION DOUBLE ALL THE

  SELECT THE LETTER 'K' FROM DUAL UNION ALL

  SELECT THE LETTER 'L' FROM DUAL UNION ALL

  SELECT'M ' LETTER FROM DUAL UNION ALL

  CHOOSE "N" LETTER OF THE DUAL UNION ALL

  SELECT 'O' THE DOUBLE LETTER) L

  )

  Select the letter, COUNTER_,

  MOD (counter_-1, 5) + 1 ngrp

  of w_data

  /

  L COUNTER_ NGRP

  - ---------- ----------

  A          1          1

  B          2          2

  C          3          3

  D          4          4

  E          5          5

  F          6          1

  G          7          2

  H          8          3

  I          9          4

  J         10          5

  K         11          1

  L         12          2

  M         13          3

  N         14          4

  O         15          5

  15 selected lines.

• How to correctly compile the form under Linux

  Hello
  I have a form that is called: TESTFORM.fmb
  
  I tried to compile this form by using the following command: export

  LD_LIBRARY_PATH=/u0/oracle/prodora/8.0.6/lib
  f60gen module=/u0/oracle/prodappl/ar/11.5.0/forms/US/TESTFORM.fmb USERID = apps/password

  good fmx is created successfully, the following error is also encountered during compilation:
  FRM-18108: unable to load the following items.
  Source Module: APPSTAND
  Source object: STANDARD_PC_AND_VA
  Source Module: APPSTAND
  Source object: STANDARD_TOOLBAR
  Source Module: APPSTAND
  Source object: STANDARD_CALENDAR
  
  I'm looking for APPSTAND.fmb and I found it here: /u0/oracle/prodappl/ar/11.5.0/forms/US/
  
  So then I tried to compile again with the following command, but the problem is always occurred: export

  LD_LIBRARY_PATH=/u0/oracle/prodora/8.0.6/lib
  export forms_path=/u0/oracle/prodappl/ar/11.5.0/forms/US/
  f60gen module=/u0/oracle/prodappl/ar/11.5.0/forms/US/TESTFORM.fmb USERID = apps/password

  my question is how to compile this form correctly?
  
  
  Any input would be helpful. Thank you

  Jimmy;

  Using a WebLogic Server?

  If so, you must use the compiler of forms frmcmp.sh

  #! / bin/sh

  file in *.fmb
  do
  frmcmp_batch.sh module = $file userid = compile_all = yes
  fact

  Tested on WebLogic and work, your paths will be different

  #! / bin/sh
  Export ORACLE_HOME = / u01/app/oracle/product/fmw/oracle_pfrd
  Export FORMS_PATH = / u01/app/oracle/product/fmw/fr_inst
  export PATH = $PATH: $ORACLE_HOME/bin: $FORMS_PATH/bin
  Export TERM = vt220
  Export ORACLE_TERM = vt220
  Export TNS_ADMIN = / u01/app/oracle/product/fmw/oracle_pfrd/network/admin

  file in *.fmb
  do
  module frmcmp_batch.sh = compile_all = yes $file userid=scott/tigersy@dev2

  fact

  Published by: mseberg on March 2, 2011 08:57

  script executed since then are the .fmb directory in

  Should also work on iAS

  Thank you!!

  Published by: mseberg on March 8, 2011 05:22

• How to correctly customize the text label of a JavaFX ComboBox

  Hello

  from Swing to 8 JFX, I'll try to find out how to do something I would normally do in a single super ListCellRenderer, i.e. to customize the string that is displayed for an item. I tried this:

  ComboBox<Integer> combo = new ComboBox<>();
      combo.getItems().addAll(1, 2, 3);
      combo.setCellFactory(new Callback<ListView<Integer>, ListCell<Integer>>() {
          @Override
          public ListCell<Integer> call(ListView<Integer> param) {
              return new ListCell<Integer>(){
                  @Override
                  protected void updateItem(Integer item, boolean empty) {
                      if(item != null)
                          setText("#" + item);
                  }
              };
          }
      });
  

  However, when I do this, the custom string is not used for the selected item (rather the toString() standard value of the element). Apart from that, it is more selectable with the mouse (I submitted a bug report for this to https://javafx-jira.kenai.com/browse/RT-37445), but this isn't really the point of my question.

  What Miss me? Is not the way to do it? The thing I have to do to make sure that the selected item is also rendered using the custom cell or is there a different mechanism for that?

  Thank you

  Robert

  There is no bug here (in the API, there are some bugs in your code). The question of the selection is because you call implementation of the superclass of the updateItem (...). The display of the selected item is controlled by the button cell, not the cell factory. If you have the permissions to do so, it might be useful to retract or close the jira.

• How to correctly set the JavaMail delay

  I use JavaMail to connect to a POP3 server.
  
  In addition, I put the following properties, so that JavaMail will not wait for long if a mail server does not:
  
  props.setProperty ("mail.pop3.connectionpooltimeout", "3000");
  props.setProperty ("mail.pop3.connectiontimeout", "3000");
  props.setProperty ("mail.pop3.timeout", "3000");
  
  However, in some cases, the time-out works fine but sometimes JavaMail freezes for minutes (!) with the following debug message:
  
  DEBUGGING POP3: connection to the host 'pop3.yahoo.com', port 110, false isSSL
  
  Change the ports or protocols (SSL, TLS) has no effect. I guess that the host simply does not exist.
  
  For example, if I query pop3.yahoo.com instead of pop.mail.yahoo.com (that would be the right hostname), I have to wait long until it happens a timeout exception.
  After several minutes, I get the following exception and the application continues to run:
  
  java.net.ConnectException: operation timed out
  
  POP3.Yahoo.com seems to exist, but will not respond:
  
  localhost: ~ me$ ping pop3.yahoo.com
  PING pop3.yahoo.com (206.190.46.10): 56 bytes
  Request timeout for icmp_seq 0
  Timeout for icmp_seq request 1
  Timeout for icmp_seq request 2
  Request timeout for icmp_seq 3
  * ^ C *
  
  You may be wondering why I use pop3.yahoo.com instead of pop.mail.yahoo.com.
  Well, I just wanted to test what happens if my application user inserts an incorrect host name.
  
  I think that this question is related to this http://www.opensubscriber.com/message/[email protected]/180946.html report where the poster says that the problem occurs if the e-mail server closes the connection. JavaMail seems so long (don't know why).
  
  Given that the issue has not been resolved in the link I posted: does anyone know how to fix or at least debug this?
  
  Any help would be really appreciated!

  So now we know the problem is probably related to the encoding of your application and do not do
  JavaMail himself. If you can't figure it out by comparing msgshow.java with your code, after the
  the relevant parts of your code, or send them to me at [email protected].

• How to correctly select the files in the Explorer

  This fool has included all the details upward above in the question! This is my first time. Someone help me please? I'll come and kiss * for a week! I screwed up and used my Ctrl key to mark a bunch of files in my C:/Windows folder which are copies of a file I already had. Well after I scored between them, and then asked the computer to erase them and put them in the trash, (which was what I thought was the best way to handle this) it copies immediately of everthing I used the Ctrl button to mark. So now, I have twice the number of the same files in the same catorgoy, without it delete all of them! Can someone help this poor fool! (me)

  When you highlight the files using ctrl or shift click, if you move the mouse with the pressed key, Windows will make a copy of all files highlighted.   Try to make your selection using the arrow keys and CTRL-space and then on the button Delete.  You can also lower the sensitivity of the mouse in the control panel.

• How to correctly display the letters.

  Turn to the attachment, I thank you, MP.

  Problem solved, thank you.

• How to correctly get the percentage of CPU being used by the process

  I try to get the % CPU used by process under windows with Qt/C++. First to get a list of running processes and after that, for each process, I try to get the CPU used, for most of the processes that the result seems valid (they correspond with the windows Task Manager), but with the process of AIDA64 (running a CPU in the background stress test), I got strange as 312% values what is the problem with my code c ++?

      sigar_t *sigarproclist;

      sigar_proc_list_t proclist;

      sigar_open(&sigarproclist);

      sigar_proc_list_get(sigarproclist, &proclist);

      for (size_t i = 0; i < proclist.number; i++)

      {

          sigar_proc_cpu_t cpu;

          int status1 = sigar_proc_cpu_get(sigarproclist, proclist.data[i], &cpu);

          if (status1 == SIGAR_OK)

          {

              Sleep(50);

              int status2 = sigar_proc_cpu_get(sigarproclist, proclist.data[i], &cpu);

              if (status2 == SIGAR_OK)

              {

                  sigar_proc_state_t procstate;

                  sigar_proc_state_get(sigarproclist, proclist.data[i], &procstate);

                  qDebug() << procstate.name << cpu.percent * 100 << "%";

              }

          }

      }

      sigar_close(sigarproclist);

  You may need to scale (divide) by the number of cores.  This is the sigar code uses on windows to deliver the cpu process:

  SIGAR_DECLARE(int) sigar_proc_time_get(sigar_t *sigar, sigar_pid_t pid,
                                         sigar_proc_time_t *proctime)
  {
      HANDLE proc = open_process(pid);
      FILETIME start_time, exit_time, system_time, user_time;
      int status = ERROR_SUCCESS;
  
      if (!proc) {
          return GetLastError();
      }
  
      if (!GetProcessTimes(proc,
                           &start_time, &exit_time,
                           &system_time, &user_time))
      {
          status = GetLastError();
      }
  
      CloseHandle(proc);
  
      if (status != ERROR_SUCCESS) {
          return status;
      }
  
      if (start_time.dwHighDateTime) {
          proctime->start_time =
              sigar_FileTimeToTime(&start_time) / 1000;
      }
      else {
          proctime->start_time = 0;
      }
  
      proctime->user = FILETIME2MSEC(user_time);
      proctime->sys  = FILETIME2MSEC(system_time);
      proctime->total = proctime->user + proctime->sys;
  
      return SIGAR_OK;
  }
  

  The doc of api windows indicates the time here is a sum on all threads and must therefore be reduced by the number of cores.

  We had something like this in our use of links Java the 1.6.4 release of SIGAR.  I'm curious to know if it works for you.

  Best,

  Vishal

• Initialize the object of BrowserField of Extension JS

  Hello

  I found a post very useful for my scenario to

  http://supportforums.BlackBerry.com/T5/Web-development/widget-JavaScript-extension-callback/m-p/4725...

  According to Adam's response, we can make the reminder in JS extension with piece of code below,

  ScriptableFunction _myFunc = new ScriptableFunction()
  {
     public Object invoke(Object obj, Object[] args) throws Exception
     {
        if (args.length == 2) {
           int param1 = ((Integer)args[0]).intValue();
           int param2 = ((Integer)args[1]).intValue();
           _browserField.getScriptEngine().executeScript("add(" + param1 + ", " + param2 + ")", null);
        }
        return UNDEFINED;
     }
  };
  

  Can someone tell me how we can initialize the object '_browserField' in Java, or is - it be passed as an argument to the call of the JS Extension.

  Thanks in advance,

  Ziya.

  Hi Ziya,

  There is an even easier way to make a reminder in your javascript.  What you can do, it is something like the following pseudocode:

  ScriptableFunction _myFunc = new ScriptableFunction()
  {
     public Object invoke(Object obj, Object[] args) throws Exception
     {
        if (args.length == 2) {
           int param1 = ((Integer)args[0]).intValue();
           int param2 = ((Integer)args[1]).intValue();
           ScriptableFunction add = (ScriptableFunction)args[3];
           add.invoke(add, [param1, param2]);
        }
        return UNDEFINED;
     }
  };
  

  Basically you can actually spend in a JavaScript function as a parameter for a reminder.  You can then grasp the handle to the ScriptableFunction and then call its invoke just as your own ScriptableFunction is called.

  It is much cleaner and allows you to really take a pointer to the instance of the Add function that you are willing to call.

• How can I control the external javascript dashboard symbols?

  I came across a dozen of similar threads, but most have introduced solutions that worked in previous versions of the edge and not more working time.

  I'm trying to use Edge to create animations that can be then incorporated into cutting-edge projects either. I would then be able to control the Edge chronology or symbols of edge of items outside of the edge, as another link or button in the page.

  I can't understand how to correctly reference the stage edge or symbols.

  I have met several solutions proposed for referencing edge scene, such as:

  var comp = AdobeEdge.getComposition ("EDGE-966604542");

  var point = comp.getStage ();

  model var = $. Edge.getComposition ("EDGE-966604542");

  var point = comp.getStage ();

  var comp = Edge.getComposition ("EDGE-966604542");

  var point = comp.getStage ();

  and they DO NOTHING or raise errors related to AdobeEdge or edge or model being undefined.

  Does anyone have a solution that really works with the current version of edge animate?

  Thank you

  Scott

  Hi, Scott.

  It seems that you do not use the bootstrapCallback function, which is what you will need to get this working.  This thread from a few months (after 1.0 released) is still accurate.  He'll hope that you said in the right direction.

  http://forums.Adobe.com/message/4883264

  Hope that helps!

  -Elaine

• How to save a PDF file in Adobe so it appears correctly in the Firefox default drive?

  I have seen discussions on how to change your own settings of Firefox for poster correctly PDF files (documents to look at a PDF in Firefox 19 +) However, I'm looking for a solution on how to save a PDF file so that they display correctly in the new default Firefox reader. Our files PDF is bad looking and I can not go in the browser of each clients and difficulty settings (http://www.cherrybekaertbenefits.com/wp-content/uploads/2014/07/ACA_Infographic_072114.pdf). Meet them all parameters within the Acrobat Distiller is going to fix this without the Viewer to enter their own arrangements?

  Hmm, not a subtle difference.

  We did not have many experts PDF or Adobe Illustrator users post advice here; those who might be sprinkled around on other forums, blogs or support sites.

  I noticed when you view the properties of the PDF in Adobe Reader that the PDF has been created with optimization for active fast Web view. This is a feature that allows the progressive rendering of PDF files over a slow connection (http://helpx.adobe.com/illustrator/kb/optimize-native-pdf-file-sizes.html#...). You can try to re - generate the PDF file with this feature turned off to see if that makes a difference?

• Satellite Pro P70 - Has: 2nd invisible HARD drive - how to initialize the 2nd HARD drive

  I have a P70 - A. Satellite Pro
  'Primary' hard disk failed, and has been replaced by the service centre.

  Now, only the main hard drive is shown and the Service Center said that I had to 'initialize' the second hard drive to make it visible. They assure me that the hard drive is there, just hidden.

  How can I make visible?
  How do I initialize it?

  Usually, you can initialize the disk by DiskManagement.

  In disk management, right-click the disk you want to initialize and then click on initialize disk.
  In the dialog box initialize the disk, select the disk to initialize.
  You can choose to use the master boot record (MBR) or the style of partition GUID partition table (GPT).

  Once a disk is initialized, you can create partitions on it.
  After you create a partition, you can format the partition to create a filesystem (NTFS).

• How can I get the ePrint android app to print on the correct printer?

  My home network is a HP OfficeJet Pro 8500 A909 connected to the network wired (not wireless), and which is NOT active ePrint (I understand it does not support ePrint).

  The network also has a HP OfficeJet 7500 has yet once connected to the network by wire (not wireless) and what ePrint IS activated.

  Both printers are on my network 192.168.1.x behind a router, but not a proxy with separate IP addresses.

  If I send a print by the 7500 ePrint a email address, he goes out on the printer correct (7500).

  But If I print using the HP ePrint home & Biz Android app that shows to the 7500 a print out immediately on the 8500 - the incorrect printer. The app shows the type of printer as 8500, although she still bears the name of 7500 a correct.

  So I have 3 questions:

  1. How could I get the ePrint initiated by app printed to reach the 7500 a?

  I like the idea that it is possible to reach the 8500 and 7500 a remotely (when I discovered ePrint after buying the 7500 a I checked if the 8500 supported that to find it does not work). But, if I wanted to keep accidental remote printing to the 8500 then...

  1. How can I print on the 8500 email? (Remember, emailed still prints go to the 7500).
  2. How can I add the 7500 a the ePrint application so that I can print to the 7500 a still without disturbing the current app ePrint printer that prints to the 8500?

  Thanks for the tips you may have.

  Kevin

  Hi, I would like to try and answer your questions to the best of my ability:

  1. How could I get the ePrint initiated by app printed to reach the 7500 a?

  With the printed file you want displayed in the app, you must see the details of the printer at the bottom of the screen on your device. If the printer you want to print to is not presented, you can press the arrow to the right of the name of the printer and then select the printer at the top of the next screen. It will automatically search and find printers available on your network. Choose the printer you wish to print and it will update the printer selected at the time of printing. I've included a few screen shots of what it will look like

  

  1. How can I print on the 8500 email? (Remember, emailed still prints go to the 7500).

  Unfortunately, it is not possible to print on the 8500 email. The printer must have the ability of ePrint in order to be able to do this.

  1. How can I add the 7500 a the ePrint application so that I can print to the 7500 a still without disturbing the current app ePrint printer that prints to the 8500?

  See the answer to the first question

  If this does not solve your problem you can try to install the HP Home Network Diagnostic Utility tool to check that nothing is wrong with your network printers

• How to get the icons to display correctly in the Finder?

  At the time of the "classic" Mac OS, if the icons are not correctly display in the Finder, we could 'rebuild the desktop file' to correct the problem. I've recently updated to Yosemite, and most things work well, but for some reason, most of the files in the Finder .webloc now show as blank icons (but not all; a few show the correct icon). There is no model, I can see: some very old .webloc files now show a white icon (where I know that their icons used to be correct), while the most recent show the icon of correct - although I just created four (by dragging the URL of the Safari, the usual method) which are all empty. Sometimes they appear with the older icon, with the symbol @ (although those who seem to have changed vacuum after running and restart maintenance). I tried from an external disk, repair permissions and repair the file system, as well as cleaning with the utility of Maintenance (which clears the web browser and other caches), nothing works. Does anyone know how to get the computer to display these icons correctly?

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.finder.plist and com.apple.desktop.plist.  Move the .plists on your desktop.

  Relaunch the Finder by restarting the computer and test. If it works fine, delete the plists from the desktop.

  If the same, return the .plists to where you obtained since, by crushing the latest.

  Thanks to leonie for certain information contained in this.