How to create a CD with the OEM of the WinXP operating system?

Similar Questions

• Hello. You will need to update Mac OS El Capitan. Currently have v.8 CS Photoshop and Lightroom 2 v.2.4. In order just to work with the new operating system, please inform for updating both.

  Currently have v.8 CS Photoshop and Lightroom 2 v.2.4. In order just to work with the new operating system, please inform for updating both.

  Hi R0w1% 40nd,

  Adobe Photoshop CS v.8 and Lightroom 2 v.2.4. are very old software and the operating system you are using is the most recent, so there may be compatibility issues that adobe has not tested these applications on newer operating systems.

  The installer for Adobe Photoshop CS v.8 and Lightroom 2 v.2.4. are no longer available.

  You can see the creative Cloud, creative cloud and rates membership plans | Adobe Creative Cloud

• CReative cloeud works with the linux operating system?

  CReative cloeud works with the linux operating system?

  Adobe Creative Cloud

  Hello

  Unfortunately, the product Adobe Creative cloud does not work under LINUX. Please access the link as follows for the system requirements for Adobe Creative Cloud products.

  System requirements | Adobe Creative Cloud

  Thank you.

• Photoshop CS 5.1 is compatible with the new operating system of El Capitan?

  Photoshop CS 5.1 is compatible with the new operating system of El Capitan?

  Ron, Photoshop CS5.1 should work with MAC El Capitan.

  Also, please see the following link: made CS5 Photoshop, Illustrator, InDesign works after upgrade Mac to El Captian?

• How to create two employees with the same name as the vendor record?

  Hi all
  
  We must create a vendor for the employee record, so that we can issue pretty invoice for cash payment. If there are 2 employees with the same name, how can we create records of supplier for these 2 employees? The system does not have the name of the provider in duplicate.
  
  Please notify.
  
  Kind regards
  HY

  Hello

  In R12, it is possible to create 2 employee with the same name but with a different number.
  And it is also possible to create these 2 employees as suppliers in Payables.

  HTH,
  Vik

• Performance problem with the guest operating system

  Hello gurus - I have one of the most unusual questions, I ran into a few time.   Here it is:

  I have a guest w2008R2 OS - installed in a 5.1 version of VM 7 vSpherer - which has an Emulex LPe 12002-E 8 GB dual HBA port is assigned to the as 2 PCI (1 device per port) via DirectPath devices

  The guest operating system has an application that performs backup tests.   WWPN of the HBA is zoned in the fabric and declared in the interface of Compellent Storage Center and everything is good here. the application creates a replay of a volume, mount it as a drive, read all the blocks, then dismantles and moves then repeat the process with what ever additional volumes should be safeguarded.   It is so cool I have do this with a VM right and not a physical host?  (would be cool if I had work NPIV but that's another story, not with technology HBA vendor support...)

  So, what's the problem?   Well, the bed the mounted disk backup will work extremely slow as slow as 5MB\sec flow, then during any other activity takes place on the system the flow jumps up to 150MB\sec all of a sudden and will continue to run fast for a long time and finish jobs on time with each work taking a little more than an hour.  But when the slow going the same work (all jobs are the same, they are simply by reading all the blocks of a bunch of 200 GB volumes and wrote a set of NULL value, do not forget this is just test) takes up to 10 hours to complete.

  I think that what is the culprit?   POWER MANAGEMENT.

  I have just about each performance counter and the journal of events known to man and I don't see anything abnormal on the table, ESXi virtual machine, nothing.  But what I see in the newspapers is any kind of activity that could happen in a transparent manner to save energy.

  FACTS on this case:

  -Reservation of memory is defined (it must be for directpath otherwise, you can't power on the virtual machine)

  -Booking CPU - has not been defined before an hour ago, I gave her just a small reserve for this rule, so I do not know if this will help alleviate the slow flow, or have an effect on what I think is a question of power (unit linked) management

  -windows power management is set to high performance never-ever - but not until an hour there doesn't I changed advanced settings for USB Disabled------turned off.  PCI peripheral energy saving setting was already off.  Which is in contradiction with my theory.  But maybe, just maybe, something is broken somewhere, or could be a bug... blah blah blah

  -the HBA, Emulex, as it appears in Device Manager in the guest OS doesn't have a power management tab to disable the feature, I don't see that the adapter VMXNET3 had this tab, and I turn off the power save setting to be conservative, do not think that it was the culprit, but as there is no real data running through the NIC.  The data is simply to be read from the disk mounted, not copied on any wire Ethernet.  never the less, in the Emulex properties is a Details tab and a selection of power data, and performance data indicate you what power mode, the device is, as well as feeding supported systems.  D0: full power, but D3, which shows as supported by the device, is an energy saving mode.   I could not yet attend the setting at the time of slow activity, my good intention as soon as possible. He is currently shooting in D0, full power.

  This is so what I have to offer on this, I hope that its just...   If I'm missing something, or if others have experienced this massive loss of unknown flow without reason and have resolutions, please share.

  If there is a way for me to disable power on the Emulex HBA management inform you please, I don't mind if I stop to enter the firmware, if that was even possible.  But if possible I would disable it immediately before any new tests are executed.

  The root cause of this issue has never been identified by VMware support which for me is a question of ugly.  Reservation of CPU for the VM using directpath IO with HBA installed in it corrected the problem.  I'd be leary with direct path IO.

• VMWARE Newbie - installation problems with the guest operating system

  I heard a lot about the use of VMWARE for a long time so I downloaded and then installed ESXI 3.5 on a test area.  I installed the client and have been able to create a new virtual machine.  However, I run into some difficulty with installing a guest operating system.  All the pdf that I could find have suggested that simply by putting a CD in the server's drive and then turn on the virtual machine would start the my guest operating system installation process.  Unfortunately, my VM doesn't seem to see my CDRom and tent drive a start-up network, followed by a brief wait for the message 'Operating system not found' timeout.

  Can someone please help me find a way to create a new guest OS on my VM so that I can.

  1. understand the process

  2 start testing.

  Thank you in advance.

  If you have installed of course the VI Client to create the VM, and you insert the CD into the ESXi host? You can go to change settings on the virtual machine, click the CD/DVD and select the option use the host device. Also ensure the connection to turn on is checked.  When you turn on the virtual machine, it should see the CD that you inserted in your ESXi host. Once you get the operating system to load, you can configure to allow remote desktop connections and access the VM as a traditional physical machine, rather than relying on the console of the VI Client view.

• Battery blackBerry 10 draining with the new operating system

  Hello... has anyone else experienced battery drain with the new OS?  I downloaded 10.2 yesterday night and plugged my Z10 into a wall outlet.  She enrolled in the 33% autonomy this morning after an hour 5 responsible... anyone else have this problem?

  Nice day

  Welcome to the BB forums

  I'm not having any problem, have you added all the emails, applications?

  Its normal to let your Z10 adjust to the new operating system.

• How to create a recovery with the Image of the DVD of Windows 7 Partition?

  My laptop got screwed that I started a month on vacation and no DVD of Windows 7 with me. I think that the best solution would be a partition with a bootable Windows 7 DVD image.

  Any suggestions on how to make a? -Nigel M

  Make a Windows 7 image and store it on a separate partition

  1. create a partition large enough to store an image of your Windows 7 installation
  2 make a Windows 7 image and save the image on this partition
  3. with the program allowing you to make the image to burn it to a bootable recovery CD Imaging
  4. If you need to restore the image, insert the CD to boot and start the restore process.

  Create a System Image in Windows 7

  After you install and activate Windows 7 create a system image as a backup of your current computer in case you need to reinstall it. That will save you the trouble of having to reinstall Windows 7 and installed everything currently again, and it takes much less time to do.

  1. click on the Start Menu and type "Save", and then click Backup of your files.
  2. in the Control Panel window that appears, click the blue link to the image.
  3 create a system image window should pop up.  Select which hard disk, DVD, or network location, you'll save your image.  Click next to continue.
  4. on the next page, check disks in your system and your system for.  Once you have selected the drives, click next to continue. Note: You can select as many records as you want (if available), but you choose to include means to the greater will be the size of the image.
  5. the next window is just a review, make sure everything is correct, and then click Start backup to start the process.  It may take 10 minutes or more, so patience is needed.
  6. once the backup is complete, you? He's prompted with the option to create a system repair disc.  It's a good idea, just in case your system has problems in the future.  Click Yes.
  7 choose which disc recording drive you? He's use to burn the disc.  Insert a CD or a blank DVD for the physical disk, and then click on create disc.

  How to restore Windows 7 from a System Image
  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup

  You can also use a disk imaging hard program - they both allow you to create a rescue disk.

  Reflect disk imaging:
  http://www.Macrium.com/reflectfree.asp

  Paragon Backup & Recovery Free Edition:
  http://www.Paragon-Software.com/home/DB-Express/download.html

  Windows 7: create a Partition of Installation of system to install Windows (I nstallation Partition, not an image)
   
  (1) create a partiton of 3.5 GB at the beginning of the hard drive, then the rest of the hard disk you want to partition.
   
  (2) copy the whole DVD on this 3.5 GB partition and make the partition bootable.
   
  Open the command prompt and run the following:
   
  x:
   
  CD/Boot
   
  x:\boot\bootsect/nt60 x:
   
  (where x is your score)
   
  A message "startup code has been updated on all targeted volumes" should appear.
  Then, verify that the partition is marked "active" in disk management.
  If necessary, right-click on the partition and 'mark the partition as active.
   
  (3) upon reboot of the PC will automatically launch the partition setup and add an entry 'Windows setup' in the BCD entries. If this is not the case, change the boot with EasyBCD menu. http://NeoSmart.NET/DL.php?id=1

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• How to create a share with the shape of a friend

  Hello

  Anyone know how to create a form of "share with a friend"? It is about sharing a simple html page not an e-commerce site or a blog page.

  FYI a link:

  http://i-communicate.com.au/new/media-handling.htm

  See you soon

  Micha

  Found that I need to add or change the {module_siteurl) to {module_pageaddress} to refer to a specific page.}

• How to create a grid with the tables and Boolean values?

  As part of a larger project, I'm trying to create a Subvi, which will allow me to spend a "cursor" in a 3 x 3 matrix.

  It should be 2 Boolean inputs, one for move them down in the table and the other to move them to the right. Once reached the edge of the table, the "cursor" will start back at the beginning.

  I have a vague idea of a table to 2 dimensions with LED. Once 'down' has been selected, the corresponding light to (0,0), light (0.1). Goes the same for the button 'right '. When 'down' is pressed (0.2), the LED should turn off, and LED (0,0) must light up.

  I'm sure it has something to do with the initialization of the tables, but I can't seem to find the right way to do it.

  Any help is much appreciated. Thank you!

  Your array is always empty.  Look at the detailed help for the function page replace table subset.  He says that the function has no effect if the specified index refers to a location outside the table.

  What you see on the Panel is only a view and has nothing to do with what is in the table.

  Lynn

• How to create a logo with the letters in 2 different colors

  I need help with a logo. I am trying to create a logo were it is as if a light shines on the type then part letters are in 2 different colors.

  Set the type by using the text of point tool (meaning click then type, no click-drag-release then type). Using objects of type two, one for each line.

  

  Draw the path of the light with the pen tool, fill it with yellow and move it to the back (object > Arrange > Send to back).

  

  Select the first line of text and the spotlight and go to object > clipping mask > make.

  

  Now simply select objects of type with the direct Selection (white arrow) tool and fill them with the blue wire.

  

• How to install a new windows 7 on a laptop with the dos operating system

  I bought a new HP 15-s005tx with an operating system of back. Kindly help me to install a new copy of windows 7 using bootable dvd.
  Thank you

  Hello

  The following assumes that you are trying to install a 64-bit Windows 7 version and the HARD drive has a Table of Partition GUID.

  Judgment of the laptop.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Bios Menu ( f10 ).

  Under the System Configuration tab, expand the Boot Options Menu.

  You must set the Secure Boot to disabled and legacy devices on " Enabled".

  When you're finished, press f10 and select this option to Save the changes.

  You will then need to enter a PIN of 4 numbers displayed on the screen to confirm the changes to the settings - enter the code and press ENTER.

  Insert the Windows 7 installation disc and the stop of the laptop.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to select the CDROM (uefi) option and press ENTER - if you are prompted to "Press any key to continue...". "- make.

  Kind regards

  DP - K

• I have HP DV6-1256tx, I want driver for my laptop compatible with the next operating system Windows 8...

  Hello. I have HP DV6-1256tx, I want drivers for my laptop compatible with the next Windows 8 operating system. How to download, can somebody help me please...

  Give me the link or something where I can download the drivers...
  
  Thank you

  Edriss Dave

  HP does not currently have drivers for Windows 8. You probably won't need them. Windows 8 is not coming. It's here!

  Just do the installation on a spare hard drive and bring the original HARD drive to a safe place.

  . Windows 8 has drivers built in for most laptops and desktop computers. I did have to look for a driver in two facilities. One was an HP mini and the other was a Toshiba laptop.

• HP Deskjet 2050: HP Deskjet 2050 incompatible with the Mac operating system installation

  My laptop doesn't have a hard drive, so I tried to configure the printer remotely by sharing the drive through another computer, but when I tried to install the software, it says "this Setup program is not compatible with the version of the operating system on your computer. It is only compatible with 10.6 and below."

  Then, I went to this link http://support.hp.com/us-en/drivers/selfservice/HP-Deskjet-2050-All-in-One-Printer-series---J5/40274... trying to download the software from the website, but was unable to do so.

  How to set up the printer on my laptop if it shows that it is not compatible with my operating system?

  Hi @AAK21,

  Welcome to the Forums of HP Support! I see you are having problems installing the printer on Yosemite. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  You can always try to open the software by following the steps described in this paper: How to open a developer not identified in OS X applications.

  The steps should also work for Yosemite.

  If the problem persists, I would suggest to download and install the HP v3.0 for OS X printer drivers.

  If there is anything else I can help you, let me know. Thank you.