How to create a circle dotted with dots whose size varies...

Similar Questions

• How to create a circle of multiple segment?

  Hi guys,.

  I need some advice on how to create a circle segmented as shown in the picture as an attachment. I have it as a jpg, but I want to create it in Illustrator so I could have more control over the parts. For example, while the image shows three segments, I may have to add another in the image (this is the part of a demo of process).

  Advice/help greatly appreciated.

  See you soon

  Carl

  Carl,

  You can (all circles are concentric):

  (1) create two circles, indoor and outdoor, and oppose > compound path > make.

  (2) create an auxiliary outside circle, extending outside the extreme parts to make arrows

  (3) create a tip of arrow in the center of the circles; to avoid its pointing outwards (too), you can place its Center (rather than the part which can / base) in the Center.

  (4) move a copy of the arrow by the width of the desired interval, cut to side anchors and remove the base segment (and filling) If you have a path composed of two curved segments.

  Movement 5) a copy of 4) at the top of the arrow Tip 3).

  6 move 3) 4) and 5), in position with the centre between the two circles (from the average of the rays) and turn all of them as well as the circle auxiliary so that you get all the arrows placed in the right way (120 3, 90 degrees to 4 degrees, etc.).

  (7) hide/remove the auxiliary of the circles,

  (8) hide arrowheads,

  (9) select (Ctrl / Cmd + A) and Pathfinder > divide and remove unneded parts, namely the gaps and the funny thingy in the middle.

  Now you have the parts of the circle in a simplified version since they would be without the sides of arrow sticking out (some do),.

  (10) show arrowheads, and then select each with the corresponding part of circle and Pathfinder > unit (or Add to shape area or whatever it is called in your version).

  (You can color the parts as desired in connection with 9 arrow/circle) or 10).

• How to create a photo album with ms office?

  How to create a photo album with ms office? I tried to use picasa, but I don't know how to make an album. I also want to add a text below.

  Click on the Forums link at the top of the page and go on the forums of office to ask. But, if you can not understand Picasa, you'll probably some luck using nothing else. Consider going on the forums of Picasa and get help.

• How to create a recovery disc with all vista updates?

  original title: how to create a recovery disc with all vista updates without starting from scratch, so I can replace my hard drive?

  My hard drive seems to be dying.  I would replace the drive.  I reloaded vista from scratch with all the updates, but it took forever.  I would like to make a record of recovery with all updates.  IAM on vista Home premium.  32 bit

  If you want a good backup program that backups image, I recommend Acronis True Image 2010:http://www.acronis.com/homecomputing/products/trueimage/.  It offers a free trial, so you can test and if you want it's only about $30 for the original version.  A lot of people I know this program and use it instead of Vista even in versions of Vista that offers imagery as this program does a better job.  Of course you also need a place to put the backup (which will take a lot of space), so also consider.  The best choice would be a USB external hard drive at least as large as the readers you want to back up (not only the data on them, but the entire available disk space, so you miss when you add more information about the disks).

  You cannot use IMGBURN do - it can't do anything like that.  It must be the imagery of backup software.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to create a new project with other page with the new version of Muse layouts?

  Hello
  If someone would continue to operate as before with the inadmissible Muse version... is - this posible to have both versions installed? or how to create a new project with other page with the new version of Muse layouts?
  Or how to download third party) 3 different configurations (desktop/tablet/mobile) under the same url with a clean result, like up yet with the Muse does not?

  Thanks for any help,

  Patrick

  Use the new version! What you want to achieve, will work! Go to the 'Page' menu and choose 'Add another Layout' and the missed buttons are in plan view.

• I need to update the screenshots for a new version of an app existing Itune application to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  I need to update the screenshots for a new version of an existing iTunes Connect App asks me to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  You must call the assistance of the company and ask them to help you with this. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking at the Middle at the bottom of the page.

  Neil

• How to create a menu manual, WITH dropdowns

  How to create a menu manual, WITH dropdowns

  You can use the "Composition" widget with these settings:

  Note: Use triggers to place your text. You can use each box to add all your links on the page in question.

  

• How to create the new domain with lookup?

  How to create the new domain with list of choices like terrain dDocType system?

  Administration/Admin Applets tab / SCCM / information fields.
  Add field or edit a custom field if you have one.
  The name field (the name will be prefaced with the lowercase letter x behind the scenes, if ever, you write the code to call it if you name this Fruit it will xFruit for code)
  Define your values for the field, but the important thing for a menu drop-down list or list of selection will be to list the Option activate the checkbox.
  Then, you perform one of the 3 main things to put data in the list.
  1. manually fill in a list of options
  2. use a DB or DB table view to view Configuration Manager
  3. create a complex tree (read the documentation on which I him have not used)

  If this does not answer your questions, click the help button in the applet.

• How to create these little dots?

  I would like to know how to make these little dots on an image in PS.

  

  See here on the left and right of the banner, these points that are fading a bit in the Center.

  

  Or on the same points.

  Please, I would like to know!

  Try this:

  File > new. 3 "x 3"

  Draw a guide 1 "down from the top and 1" from the left.

  Select the white box, Inverse the selection and editing > complete with gray or any other color green

  It will look like the image below.

  

  Reduce the size to 6.25% of original

  It now looks like this

  

  Edition > set the model and click OK

  Open the new file.

  Edit > fill > model and choose the model that you had saved.

  This is the result, which can then be reduced and integrated in the design

  

• How to create a (class dot Tag without spaces) tag.class via the window of Dreamweaver CS5 rule.

  How to create a tag.class via the window of Dreamweaver CS5 rule.  I want to create a class that affects a specific tag.  I can for this use the code window, but I'm trying to use the Style CSS window.  The tag that I create is 'ul.navbar.  I was able to be machined, but I get "ul .navbar", note the space between L and the period.  I want to remove the space and just create "ul.navbar", without having to rename.  The code will appear as:

  ul.navbar {
  position: absolute;
  width: 9em;
  left: 1em;
  top: 2em;
  list-style-type: none;
  }
  The question is perhaps more base on my understanding of CSS rather than Dreamweaver, if yes, I'm sorry.  I'm just starting to work with CSS.
  Thanks for your help.

  My point is that this is not the best way for the style of this element of the page in most cases.  However, if you create a rule made up, you can enter "ul.navbar" directly in the selector name field.

  Don't overuse of classes.  They confuse you in just a few weeks after you have modified looked at the site.

• I have a column with two values, separated by a space, in each line. How to create 2 new columns with the first value in a column, and the second value in another column?

  I have a column with two values, separated by a space, in each line. How do I create 2 new columns with the first value in one column and the second value in another column?

  Add two new columns after than the original with space separated values column.

  

  Select cell B1 and type (or copy and paste it here) the formula:

  = IF (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  shortcut for this is:

  B1 = if (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  C1 = if (Len (a1) > 0, Member SUBSTITUTE (A1, B1 & "", ""), "")

  or

  the formula of the C1 could also be:

  = IF (Len (a1) > 0, RIGHT (A1, LEN (A1) −FIND ("", A1)), "")

  Select cells B1 and C1, copy

  Select cells B1 at the end of the C column, paste

• Satellite P840: How to create the secure boot with UEFI Bios recovery disk

  Hello

  I have laptop P840 that came pre-installed with Windows 8, which I've upgraded to Windows 8 Pro.
  I then updated to Windows Pro 8.1 by Windows store. Please notify:

  1. how to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.

  2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  3. check partitions with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  Your help will be very appreciated.

  Best regards

  Romero

  I found your previous thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74272

  > 1. How to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.
  To be able to boot from sources other than the drive HARD internal, the boot mode must be set to the CSM and secure boot must be disabled!

  > 2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  Your laptop has been preloaded with Win 8. Right? For example, the USB flash stick memory you just use the Toshiba Recovery media creator contains the Image of Toshiba with Windows 8. Don t mix this Toshiba image with the image that can be created using Microsoft's own backup and restore function. Both are different pictures!

  > 3. Check it with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 partitions primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  The last partition contains the files on HARD drive recovery. Usually this partition will be created again when you use the Toshiba Recovery disk to put the laptop back to factory settings. So in the case where you n t need this files or the partition, you can delete

• How to create a horizontal Gallery with buttons?

  I can't understand how to create a way to show my photos as a horizontal Gallery with buttons to scroll (photos at left), as Elizabeth Gadd photography . Can anyone help?

  Have you looked at the standard slideshow and Lightbox widget or sought another widget "image Carousel"? It's really basic things.

  Mylenium

• How to create the energy bar with flash pro?

  Hello

  How to create an energy bar as what you see in flash facebook games, which increases with time "as every minute add 1 energy point' and reduce playing a role or a battle or just do an action?

  You can simply use a rectangular moviweclip/sprite and use Actionscript to control the width (or height), where the energy is proportional to the value of the width (or height).  You can also pair with a textfield that allows you to display the actual value of energy as it changes.

• How to create a blog site with Muse - or I can't?

  Now I can design some nice sites with muse and I want to add blogs.

  I have to use a plug-in or add on, or is there a way to do it in the Muse?

  Hello

  Take a look at this discussion

  Re: How to create a Blog in Adobe Muse