How to create a flash disk drive with XP pro & SPs on
I have my copy of Win XP pro without service pack. Can I create a flash drive to include my XP pro & downloaded SP is to be used as the operating system for my new computer?
You cannot install Windows XP on a USB key, but you can do a XP SP3 slipstreamed installation CD. You can use this CD to install Windows XP on an internal hard drive.
Slipstream SP3 of XP installation disc:
http://Lifehacker.com/386526/slipstream-Service-Pack-3-into-your-Windows-XP-installation-CD
Tags: Windows
Similar Questions
-
How to create the hard disk volume/partition in windows 8?
I bought a new Sony Vaio with windows 8 OS. I need to create a new partition/hard disk volume. How to create the hard disk volume/partition in windows 8?
I bought a new Sony Vaio with windows 8 OS. I need to create a new partition/hard disk volume. How to create the hard disk volume/partition in windows 8?
shrink the volume c: http://www.sevenforums.com/tutorials/2672-partition-volume-shrink.html
Then create a new volume u want http://www.pcandtablet.com/windows-8-drivers/1216/how-to-extend-volume-in-widows-8-and-take-extra-space-for-a-drive.html
-
Re: Satellite L355D - how to create a recovery disk?
I searched all over the forums, but does not know how to create a recovery disk works for my laptop. I know it is run from a partition on the HARD drive, but I can't figure out how to access this partition. Should there be some sort of built-in utility?
Thank you
You can create the recovery only DVD disc if your laptop computer has preinstalled Toshiba recovery disc creator and factory settings.
Please check if you can find this tool under start > all programs > Toshiba. There you should find shortcuts to launch this utility.
-
How to create a file name variable with the County and the date?
Objective: Create a file name variable with the County and the date
Error: get a lot of error. Do you know how to change my code?
Question: how to create a file name variable with the County and the date?
Mini code:
std::string * rawfilepath;
std::string * rawfilename;rawfilepath = "./shared/documents/";
RawFileName = rawfilepath + 'rawlog -' + 0 + '-.txt ';
QFile file (rawfilename);
If (file.exists ()) {}
rawfilenamecount ++;
RawFileName = "./shared/documents/rawlog-" + rawfilenamecount + "-.txt ';
}Thank you for your attention,
Thank tzander reminding me the idea. Method of cascades is not good for me because all of the kernel code is written by Native. If I change the channel to QString, I need to change a lot of codes.
Solution is below.
While (access (rawfilename, F_OK)! = - 1) {}
rawfilenamecount ++;
sprintf (format, RawFileName, rawfilenamecount);
fprintf (stderr, "file exists");
}Rawlog = fopen (rawfilename, "w"); Save the file in a specific path.
fprintf (rawlog, "System Time (ms)" ""); -
How to create a user local administrator with the user root on the CV
As says the tile, how to create a user local administrator with the user root on VCS-Express. I lost the password and cannot log in as an admin user, but I can't seem to log as long as user root.
Once connect you with the root account, type in "tsh", from there, you can create the accounts of local administrators with 'xCommand AdminAccountAdd. See the reference section of command of the VCS Administrator's Guide, starting on pg 517.
If your VCS is a virtual machine, you can change the password of admin with vSphere, or if it is a hardware appliance, you can use the serial port, see pg 312 of the Administrator's guide.
-
How to create a my Signature (signature with the tablet of manufacturing) Action?
How to create a my Signature (signature with the tablet of manufacturing) Action?
I use PSCS6?
I have no problem making an action of signature if I pick a font and then type in my name,
but to make a real action of my signature seems impossible.
Hello
There is a very cool technique to do by your signature in a Photoshop brush. Once this is a brush, you can change the size and place the signature everywhere where you want.
Google "Photoshop brush signature" or something similar and you will see a lot of tutorials. Try this one:
Photoshop reference guide | Creating a custom brush Signature | Peachpit
Basically, you sign your signature on a blank piece of paper, then you scan in a JPG or TIFF file, then you open that file in PS to create a brush.
I hope this helps.
John
-
How to create a form of relief with highlight on the edge, in 2015 of the Illustrator
I work in 2015 of the Illustrator. How to create a shape (3d) raised with highlighted on the edge, like this:
It will work as a form, not a button, so there is no need of different States. I looked at a few tutorials to create buttons, and they seemed much more complicated that I think you need to create a form like this.
-Stuart
Experience 3D bevel & emboss, front view and Tall-round bevel. Adjust the lighting you want. Then add a light shade.
Personally I have always found these bevel unsatisfactory effects, but you can produce similar results using carefully controlled mixtures
-
How to create the object rectangular box with a pure action script.
How to create the object rectangular box with a pure action script?
I think, it can be done through the clip library, but I'm not sure. Please, I want to take the suggestion to create a rectangular box as a script through
Take a new file and write about the first image the code below, it works fine:
var rect = new Shape();
rect.graphics.beginFill (0xFF0000);
rect.graphics.drawRect (0, 0, 100,50);
rect.graphics.endFill ();var MC = new MovieClip();
mc.addChild (rect);
addChild (mc);If this doesn't solve your problem then paste the error you get
-
How to recover a bad hard drive with no recovery software.
I'm working on a 4-b000 want Pro. The hard drive has failed. I have a replacement drive on the way, but I did not create a recovery disk when the laptop was purchased. It had windows 7-64 bit on this subject before. What are my options to get a recovery media for this laptop?
James
Hi James,
There are two options available.
1. you can order a replacement set of support for recovery from the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office). It will also recreate the original scores, including the recovery Partition.
2 another option that you might consider is to create your own Windows 7 USB flash drive Installer.
Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).
An example of a COA label can be seen here.
Using another PC - just download the correct disk Image ( that it must be the same version that originally came with your laptop - IE Home Premium, professional etc. ) from the link below--the source of the Windows Image is Digital River.
Windows 7 sp1-iso-official-32-bit-and-64-bit
Once done, use an application like Rufus to create a bootable Windows 7 usb flash drive.
When creating, tap away at the esc you key start Notepad to open the Start Menu. Insert the Windows 7 flash player. Select the menu of Boot Options ( f9 ). Use the arrow keys to select the flash drive and press ENTER.
Use the flash drive to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx
You may need, additional drivers and software are from here.
Best regards
DP - K
-
Create a Flash disk to USB 2.0 of recovery from a Flash disk to USB 3.0 of recovery
I'm 4-1050ca running Windows 7 x 64 Home Premium. I created a USB 3.0 drive Flash recovery only to discover that, although I can boot from the appliance when it is in a USB 3.0 port, I can't restore the system from it. This recovery Flash drive boot to the USB 2.0 port, and Yes, the HP recovery software complain of inability to use the recovery media.
I want to remedy. I would like to be able to start and restore from my USB 3.0 Flash drive recovery when it is plugged into a USB 3.0 port. Otherwise how can I duplicate the recovery on a USB 2.0 Flash Disk media?
I understand you want to take the drive to USB 3.0 recovery and put it on a drive USB 2.0 instead. This can be a bit of a tricky scenario because the Recovery Manager only helps bring.
That said, there is a utility called CloneZilla designed specifically for a drive to a second drive in the mirror.
This document is a very good guide on the use of CloneZilla to accomplish this task.
It is recommended to use the option of the image, but you would need the peripheral device option for your scenario.
You select the USB 3.0 as the source drive and the USB 2.0 as the target drive. Make sure you don't accidentally select the hard drive of the laptop as CloneZilla will wipe the drive target using peripheral device.
I note that I have not personally tried to clone a recovery USB disk. Given that only one set is allowed to do, I can't guarantee that the USB has not been modified to prevent this particular method. It is interesting to try. -
How to create the recovery disk in Windows 8
Original title: HELP! I need to know how
I recently got a laptop HP 2000 for Christmas. She has windows 8, which I'm not too used to it. And I can't understand how or where to go to create a recovery disc for it before you put anything else on my new computer laptop. How can I do this? Any help would be appreciated.
Hello
Recovery of the system and the disk recovery options
http://Windows.Microsoft.com/en-us/Windows-8/system-recovery-diskCreate a recovery USB disk
http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-driveHow to create a system image to refresh your PC in Windows 8
http://support.Microsoft.com/kb/2748351Some manufacturers have integrated recovery methods to verify with the help of HP, their online
documentation and ask questions in the forums about known problems.HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=========================
While on the screen type start - Help
Or Win Key Q plus Apps search - help
Or charms - Search - Apps - Help Menu
After that the foregoing-> on left click-> Help and Support.
==================================
Solution Windows 8 - left Center - learn more
http://support.Microsoft.com/GP/Windows-8Meet Windows - a good start
http://Windows.Microsoft.com/en-us/Windows-8/meetGet to know Windows
http://Windows.Microsoft.com/en-AU/Windows-8/basics#1TC=T1How-to: get acquainted with Windows
http://Windows.Microsoft.com/en-AU/Windows/how-to#2TC=Windows8Contact: call, tap and beyond
http://Windows.Microsoft.com/en-AU/Windows-8/touch-swipe-tap-beyondIs a free and convenient application available on the Store - Top Free
"Windows 8 Cheat Keys.
http://apps.Microsoft.com/Windows/en-us/app/Windows-8-cheat-keys/24f62990-98c7-4c26-95cb-cb09267680e8==================================
There is no start or the Windows 8 Start Menu button.
Where is the start menu?
http://Windows.Microsoft.com/en-us/Windows-8/where-is-start-menuCustomize the splash screen
http://Windows.Microsoft.com/en-us/Windows-8/start-screen#1TC=T1Windows 8 is not available classic appearance.
3 third party programs can help:
StarDock - Debut8 - costs 4.99 $US
http://www.stardock.com/products/Start8/Free
Classic interface
http://www.classicshell.NET/Pokki
https://www.pokki.com/Windows-8-Start-menuI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
How to create a new virtual machine with two warehouses of data through new-vm?
Hi guys,.
Can you please help or direct me to the right format? I'm new with vsphere powercli.
How to create a virtual machine with two other data store by using the new-vm?
$datastore1 = get-datastore. WHERE-object {$_.} Name - eq "lun1"}
$datastore2 = get-datastore. WHERE-object {$_.} Name - eq "lun2"}
new-vm-name vmtest01 - VMHost ESXserver - datastore $datastore1 diskmb - 8192 $datastore2 diskmb - 8192 - memorymb 4096 - numcpu 2 - ID winNetStandardGuest
I got this error when I run vsphere powercli. I appreciate if you can help. Thank you
New-VM: cannot bind parameter 'DiskMB '. Cannot convert the 'lun2"val
EU to type 'VMware.VimAutomation.ViCore.Impl.V1.DatastoreManagement.DatastoreIm '.
PL"type"System.Int64 ".
At line: 1 char: 85
+ new-vm-name vmtest01 - VMHost ESXserver - $datastore1 data store
diskmb - < < < < 8192, $datastore2 - diskmb 8192
+ CategoryInfo: InvalidArgument: ( , ParameterBindingE)
Xception
+ FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomat
ion.ViCore.Cmdlets.Commands.NewVM
Bryan
The New-VM cmdlet takes a single value of the parameter - data store and all of the virtual disks will be located on this data store.
If I understand your request, you create a virtual machine with 2 virtual disks, each on a different data store.
You can use the cmdlet New - hard drive for it.
$datastore1 = get-datastore | where-object {$_.Name -eq "lun1"} $datastore2 = get-datastore | where-object {$_.Name -eq "lun2"} $vm = new-vm -name vmtest01 -VMHost ESXserver -datastore $datastore1 -diskmb 8192 -memorymb 4096 -numcpu 2 -GuestId winNetStandardGuest new-harddisk -vm $vm -datastore $datastore2 CapacityKB (8192 * 1KB)
____________
Blog: LucD notes
Twitter: lucd22
-
Satellite L - how to create a recovery disk?
Hey,.
I accidentally uninstalled the program "Recovery Disc Creator". But the folder with Win Vista Recovery disc information are still in my computer. Now, I want you help me in creating a recovery disk. My system is very unstable. So I want to re install. I hope you can help me.
Sorry, but why did you uninstall the recovery disk creator?
However, now you can not create the recovery disk because you have uninstalled the program to create the disc.
The only way I know is you use HARD drive recovery option to reinstall your laptop. You can use it if you go to the advanced boot menu (F8 before Windows starts), choose repair my computer, and then select the Toshiba HDD Recovery feature.
Normally you get this message if you start your laptop on first use:
+ Important INFORMATION +.
+ your system is equipped with a hard drive recovery system. If you need repair.
+ your computer in the restaurant to original factory State, you can do it directly.
+ HDD (press F8 when you start your computer, choose "Repair your computer" +)
+ and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.+ Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
+ Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
+ Gets severely damaged. -
Satellite Pro A300: How to create the recovery disk
Hello
I just bought a Satellite Pro A300 with Windows XP.
I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.
The information gives instuctions on how to proceed for the Vista machines, but not for XP.I know that I can recover from the hidden partition, but where this is not possible, I wish I could get CD or DVD.
There is a recovery CD included product that says only: "MS Windows XP" so I guess that it does not include drivers or Toshiba Software?Any help appreciated,
Thank you
MickHello
You have preinstalled software Toshiba TOSHIBA Recovery Disc Creator?
Please check this box.
Using the TOSHIBA Recovery Disc Creator you can create the recovery disk.But if your laptop was already pre-installed with Windows XP and then a Recovery CD or DVD must be included.
Have you checked all of the items in the box?
-
How to create a repair disk in Windows XP
Hello
How to create a Windows XP REPAIR disc?
I have Windows XP version 5.1, Build 2600.
Thank you very much
Michael
What do you think needs repair?
You were not able to find something suitable in the tutorials section?
You can make a CD of XP bootable following Recovery Console:
If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
This is not the same as recovery disks that may have come to a store to purchase the system.
You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
The ISO bootable image file you need to download is called:
xp_rec_con. ISO
Download the ISO from here:
http://www.mediafire.com/?ueyyzfymmig
Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
Maybe you are looking for
-
Failure recovery system Toshiba HDD on Satellite L300D
I recently bought a new L300D Satellite and then quickly get it infected with a virus.I had nothing on the computer that I couldn't afford to lose, so rather than try and difficulty I decided to restore the system to factory State. I started the wiza
-
HARD drive external funny - how to record data
Hi again My external HARD drive has now for some reason when I plug say need formatting... the problem is that I have 380 GB of music etc. on it... Is there n e way I can recover what is emptied if I lose it... Thank you
-
Programmatically determine what port of entry has been selected
I use the default sequential model which has two entry points, Test DUT and Single Pass. I would like to determine in my sequence of what entry point has been selected by the operator. It is possible to programmatically determine what port of entry h
-
question on installing windows 7
I'm building a new office because my wife wrecked her laptop and I'll give her mine. In total, I have two laptops over hers and a version bought Windows vista Ultimate edition. The only work of three laptop computers, but the other two, used for.
-
How can I display a chart illustrating the size of the historical record
Once, I found a way one looking at a graph showing the historical record size up slowly and then down when I had a clear out. I really want to know how do this to new but can not find it anywhere or on any forum.