How to create a GPT Partition for onekey recovery windows8

Similar Questions

• How to create and delete partitions automatically?

  How to create and delete partitions automatically?
  The environment is (10.2.0.3) 10g Oracle on the RHEL4.0 system.
  I want to partition the table of MESSAGES by date (NUMTODSINTERVAL(1,'DAY')). One partition per day. Because the table is huge, only 2 partitions (as of yesterday and today) are required to be available online. All partitions as earlier than the day before will be saved, and then dropped. I want to do the partition to create and delete the work performed automatically. How to do?
  
  Thank you

  junez wrote:
  Could do in detail?

  Here is an example of a procedure (part of a package) that adds/add a partition to an existing partitioned table schedule:

  procedure AddHourlyPartition( tableName varchar2, hour date, partitionName IN OUT varchar2 ) is
          sqlCreate       varchar2(4000);
          d               date;
  begin
          partitionName := GetHourlyPartitionName( hourly );  -- name of partition to create
  
          if existsPartition( tableName, partitionName ) then
                  -- nothing to do
                  return;
          end if;
  
          d := TRUNC(hour,'hh') + (1/24);                                -- upper date limit of the partition
  
          sqlCreate :=
          'ALTER TABLE '||tableName||'
                  ADD PARTITION '||partitionName||'
                  values less than
                          (TO_DATE('''|| TO_CHAR(d,'yyyy/mm/dd hh24:mi:ss') ||''',''yyyy/mm/dd hh24:mi:ss''))'
          ;
  
          ExecSQL( sqlCreate );
  
  end;
  

  The partition is safer to create partitions according to the experience?

  It is always better to write good packages in PL/SQL. Packages can (and should) use the application programming interfaces (API). Because our partition custom package that allows the management of partition. Or a messageLog package that allows for logging of application messages, errors, and debugging messages. Or a Notification package that allows to be send by email or SMS notifications. Etc.

  Design and software development, we should always approaches a "+ Lego mentality +"-which is to create building blocks ("+ Lego bricks +") which can be used and reused over and over again. Modularization is of crucial importance in software engineering as the result is not only of reusable code, but also the code that is easier to maintain, extend easier and easier to debug.

• How to create your default desktop for all / some users?

  Using Vista business I want to create a desktop computer by default for all users. How can I do this?

  I have a machine that has a dozen accounts. Can I retroactively apply this desktop computer to some existing accounts?

  Thanks for thehlp

  Joe

  Discussions on the topic "Change the profile by default in Vista"
  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/62ed66ad-71cd-43C3-83c0-5303d77176b8/
  by Heather

  "How to make a standard profile w / user by default.
  http://forums.techarena.in/Vista-Help/1065679.htm
  by Darrell Gorter [MSFT]

  How to create the default profile for Vista
  http://help.Lockergnome.com/Vista/create-Vista-default-profile--ftopict15825.html
  Darell Gorter mentioned here only taken methods supported to change the default user profile:
  "How to customize the local default user profile when you prepare a
  image of Windows Vista, Windows Server 2008, Windows XP, or Windows Server 2003"
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 959753
  but when you go on the link says the Tip system is not for Vista, on Windows Vista title is missing.

  I hope I could help

• How to create the file .bar for production mode?

  Hello

  How to create a file .bar for production mode?

  When Flash Builder, I configure my project for the mode of Production, he asks me a RIM certificate that must be registered (and then need a CSI file?). Where can I find this file?

  Thank you

  Signature of application information has not yet been published.  You can submit your application unsigned.  In addition, in FB4, in the Properties window of the project, under the Flex compiler, you can add

  -debug = false

  to compile without debugging information.

  Otherwise, .bar file creation is done in a regular compilation with BB CLI package.

• How to create the firewall rule for Windows 7 for javaw.exe?

  How to create the firewall rule for Windows 7 for javaw.exe? The application path differs from the new versions and user profiles. Is there generic symbols allowed for example asterisk?

  Hello

  I recommend you to send the request to another Department for assistance:

  Security in Windows 7

  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/threads

  I hope this helps.

• How to create my electronic signature for the first time

  How to create my electronic signature for the first time

  Hi debbieh62171891,

  You can fill feature & signature to create a Signature in Adobe Reader. If you want to create a Digital Signature using Adobe Reader you must then a PDF form with signature inside and drive field expanded licence fees. In this case, when you click the signature field it will take you with the process of creating a Digital Signature.

  Thank you

  Abhishek

• How to create a file .eas for sprite sheets?

  Hello

  Does anyone know how to create a file .eas for sprite sheets.

  It looks like a data xml file that would normally correspond with a sprite sheet. I usually use automated sprite sheet software to create the xml data form. I don't see the option for .eas export file in the software of the packer of texture that I use.

  It would be convenient that Photoshop has the ability to export an eas... perhaps with a plugin.

  Thanks for your help.

  EAS file format is also a JSON format, but is specific on board animate. Currently, this spritesheet format can be generated from Flash Pro CC 2014.

  Spritesheets (image file with sprite of equal size stacked in the order) of other tools like packer of texture can also be imported in animate as the dialog box animate import Spritesheet support it. Production however you specify the rows/columns and parameters in the import of fill dialog box so that the sprites are created with precision.

  Plese do try it and let us know if it works for you.

  -Reynaud

• How to create a second partition on the hard drive?

  Hello to all members!

  I recently got some virus on my laptop. So I had to use my recovery cd to recover my system.
  Now the problem is that I have asked me for the partition where are the files are being extracted. I scored at 30 GB.
  Thus, windows works fine but do not appear my rest of 50 GB.
  I thought that the recovery cd will make a second partition as well, but he did not. Now how some other partitions?
  Second question related to the first is how long I can use this recovery disk. I mean windows will remain genuine?

  For the problem of the partition, I don't know of a few possible solutions of cause that I had need of three partitions, 30 GB 1st (Windows default) and two others of 25 GB.
  The best Solution to come in my mind is to make any windows ME or 98 bootable cd and run fdisk to create the remaining partitions.
  But's done it some new questions in my mind. Do I have to use a recovery again cd? If so I don't use this process causes once again he'll wonder partition extract windows files and I will choose 30 GB again.
  And again, it will remove additional partitions.

  Please, help me and erase the questions coming in my mind...

  [Edited by: admin on March 31, 2007 08:32]

  Hello

  Partition Magic 8 is my favorite.
  I use it to create partitions, Manager, mobile, etc. This tool is really great.

  > To how long I can use this recovery disk. I mean the windows remain authentic?
  I put t know what you mean exactly, but the image on the recovery CD is already activated and genuine.
  It s a full version of Windows OS

• Laptop HP 15-afi131dx: how to create a hot spare for my system? Can I use a 64 GB flash instead of a disk drive?

  This neophyte wants to create a backup disc for a possible recovery of the operating system.

  Step by step of baby, please!

  BruceWilliamJ

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about wanting to create a backup of your system and wanted to help.
  
  What I would say, because I have been using it without problem for years, is using a third party tool known as Macrium Reflect.

  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  My experience is that SIR, when you use the option of Compression high, typically allows to compress the image file recorded at about 50% of the space USED in the OS partition.  This means that if you have a 40GB and 80GB OS partition is used, MR must only about 20 GB to store the image file.
  
  I use all the time and it usually takes less than 10 minutes to make the backup of the image and at the same time or less do a restore.
  
  In addition, MR has the ability to add a recovery Boot Menu entry.  This then allows you to boot into Windows re, and then you can use it to do a restore - when you cannot start Windows!
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  If you need more information, then visit their Web site: http://www.macrium.com/reflectfree.aspx

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• How to create a usb bootable for IE captain?

  When I was doing the usb boot, I found articles with google, but they are all so outdated.

  Many say even using an 8G usb... which of course is not allowed now, as the required minimum is 16G.

  I use the Middle terminal to the USB.

  What is the process that is more up-to-date? And what is the code of sudo for this please?

  I tried the sudo Web site code, it turns out that say that there is no function "createinstallmedia".

  Hi Guoxuan,

  When you mention "createinstallmedia" looks like you want to create a bootable Installer for El Capitan.

  Note 'createinstallmedia' is not a function built-in, but is part of the package install, as shown in this article.

  Create an installer for OS X - Apple support bootable

  Use the "createinstallmedia" command in the Terminal

  1. Download the installer for OS X for the Mac App Store. Quit the installer if it opens automatically after downloading. The installation program will be located in your Applications folder.
  2. Mount your USB key or another volume. You can also use an internal secondary partition.
  3. Open the Terminal application, which is located in the Utilities folder of the Applications folder.
  4. Use the createinstallmedia command in a Terminal to create the bootable Installer. Examples of this command are in the next section. To get the detailed instructions for use, make sure that the app install OS X proper is in your Applications folder, then enter one of the following in a Terminal:

  Path for El Capitan:

  /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia

  Note in step 4. the appropriate installation program should be in the Applications folder before you reach it.

  The article gives a more complete example of the command.

  The following examples assume that the OS X Installer is in your Applications folder and the name of your USB key or another volume is MyVolume:

  Example for El Capitan:

  sudo /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ OS\ X\ El\ Capitan.app

  If you are just trying to create a bootable USB key, then you just install El Capitan on this disc as usual, by selecting the USB key as a destination.

  Update of OS X El Capitan - Apple Support

  Best regards.

• How to create a custom control for a button where the look apply to everyone else but not the Boolean text?

  Hi all

  I would like to create a button custom as a master, so that if I change the look of the master all other buttons are changed.

  I did it with a custom control, such as a 'type strict def' otherwise the look will change , BUT if I do this as a strict type def I can't change the Boolean text more which should be different on each button.

  How to create a master control of a button where the look apply to everyone else but not the Boolean text?

  Steve Chandler wrote:

  I don't think that you can do. I just looked and as I suspected the Boolean property text is read only for strict typedefs, you cannot use the nodes property to change the text.

  As a just solution make it a typedef. When you want to change the open look the typedef and strict rendering, make your changes, then make no strict again. You will need to update the text Boolean yet once for all instances. Kind of pain. This is perhaps something for the exchange of ideas.

  Alternatively, remove Boolean text and replace with legend

• How to create a primary partition?

  I have 120 GB unallocated space on the portable hard drive.

  Since the disk management screen, I have been right click in the unallocated hard drive region.

  Where the only option available is again Simple Volume that always creates a logical partition in an extended partition.

  Vista provides ways to create the primary partition or do I have to use the 3rd third-party tool.

  Hi thomy77,

  You can use the diskpart utility to create more than one primary partition.

  A Description of the Diskpart command-line utility

  http://support.Microsoft.com/default.aspx/KB/300415?p=1

  Note: The article is for Windows XP, however it is valid for Windows Vista as well.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to create DVDs of backup for windows 8.1

  Hi I have windows 8 on my laptop that has been upgraded to windows 8.1, later. Now, I want to prepare the backup my windows bootable dvd, so please tell me how to proceed?

  Create an installation media for Windows 8.1

• How to create the constructor function for a pl/sql table?

  I created a PL/SQL type as table below:

  create or replace type typ_tbl_des_text is table of the typ_tof_des_text

  OK so far, but I would like to have a constructor function which would be subject to validations and raise_application_error when a validation condition is not met.

  How to do this?

  The typ_tof_des_text that I created with a constructor function, so that the record-level validation are performed in the constructor. And I think the postings between several records shall be made in a constructor for typ_tbl_des_tex, but cannot figure out how to create such a constructor.

  BEDE wrote:

  So, if I have understood correctly, to a plsql table type, I can't have a member procedure. Or can I? I mean, just as for a type of failure I can have one or more constructors and possibly several procedures of Member.

  For the standard tables in PL/SQL, you will need to create your own API (using procedures and functions) to handle beyond the basics provided by the language. No constructors and methods as it is no o - o.

  After thinking a little deeper, I reformulate what I said earlier and actually wants to have a member procedure called add_item, who would be first to check if an item with a key value exists and, if so, it would be up-to-date and so not only extend the plsql table.

  Two options.

  As we already mentioned, an associative array can be considered - note however that this structure of table has name-value pairs.

  Another method is to use a TWG (global temporary table). You define the structure of the once initial table. When a session uses the structure of the table, private copying is instantiated for this session. When the session ends, this copy is destroyed. The table is a temporary structure for this session only.

  It can include indexes and so on – which means you can use the constraints of primary keys, unique indexes, secondary indexes and so on.

  TWG scales are much better than collections or arrays that require a PGA (expensive private server) memory. In addition, SQL can be used natively against a GTT - unlike the arrays and collections.

• Adobe Stock: How to create a sub account for a customer?

  Hello

  I have the following problem: I found a beautiful picture on Adobe Stock what my client wants to use for graphics work I've created for him (commercial use).

  I am a graphic designer and I have the account - my client must create their own account and download the image itself?

  Or can I create a sub account for him and legally use the image for the work? If so, HOW?
  I don't find really no useful response to this question... I hope so, you can help me!

  Thank you very much and I hope to hear from you!

  Ute

  Hey Ute

  You can picture the license and use it to create work for your client.

  Please check the terms of the license for more information on the use of the customer:

  Royalty-free images, pictures and graphics. Adobe Stock

  http://www.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe_Stock_Terms-en_US_20160616 .pdf

  Thank you

  Bev