How to create a grid with columns and gutters?

Similar Questions

• How to create a grid with the tables and Boolean values?

  As part of a larger project, I'm trying to create a Subvi, which will allow me to spend a "cursor" in a 3 x 3 matrix.

  It should be 2 Boolean inputs, one for move them down in the table and the other to move them to the right. Once reached the edge of the table, the "cursor" will start back at the beginning.

  I have a vague idea of a table to 2 dimensions with LED. Once 'down' has been selected, the corresponding light to (0,0), light (0.1). Goes the same for the button 'right '. When 'down' is pressed (0.2), the LED should turn off, and LED (0,0) must light up.

  I'm sure it has something to do with the initialization of the tables, but I can't seem to find the right way to do it.

  Any help is much appreciated. Thank you!

  Your array is always empty.  Look at the detailed help for the function page replace table subset.  He says that the function has no effect if the specified index refers to a location outside the table.

  What you see on the Panel is only a view and has nothing to do with what is in the table.

  Lynn

• How to create a view with columns from multiple lines

  I posted this in the SQL/PSL forum, but I hope that experts from the database in this group can give me ideas also, the necessity is also BI reports.
  
  I have a table, for example, project_milestones, that has these columns in order:
  
  PROJ_ID, milestone_name, actual_end_date
  
  with data:
  PROJ_ID, milestone_name, actual_end_date
  ===== ================ ==============
  1001, key approval, 2009-10-02
  1001, final synopsis, 2009-10-07
  1001, approved final Protocol, 2009-10-15
  1001, FPFV, 2010-01-10
  1001, LPFV, 2010-03-12
  ...
  1002, key approval, 2008-12-02
  1002, final synopsis, 2009-01-07
  1002, approved final Protocol, 2009-01-12
  1002, FPFV, 2009-03-30
  1002, LPFV, 2009-10-04
  ...
  There are about 10 steps in each project.
  I need to create a view for dish these data at the project level, looks like this:
  
  PROJ_ID, key_element_date, final_synopsis_date, final_protocol_approved_date, FPFV_date, LPFV_date, key_element_to_final_synopsis_days, final_synopsis_final_protocol_days...
  
  How can I do this?
  
  Thank you

  user9175541 wrote:
  I posted this in the SQL/PSL forum, but I hope that experts from the database in this group can give me ideas also, the necessity is also BI reports.

  I have a table, for example, project_milestones, that has these columns in order:

  PROJ_ID, milestone_name, actual_end_date

  with data:
  PROJ_ID, milestone_name, actual_end_date
  ===== ================ ==============
  1001, key approval, 2009-10-02
  1001, final synopsis, 2009-10-07
  1001, approved final Protocol, 2009-10-15
  1001, FPFV, 2010-01-10
  1001, LPFV, 2010-03-12
  ...
  1002, key approval, 2008-12-02
  1002, final synopsis, 2009-01-07
  1002, approved final Protocol, 2009-01-12
  1002, FPFV, 2009-03-30
  1002, LPFV, 2009-10-04
  ...
  There are about 10 steps in each project.
  I need to create a view for dish these data at the project level, looks like this:

  PROJ_ID, key_element_date, final_synopsis_date, final_protocol_approved_date, FPFV_date, LPFV_date, key_element_to_final_synopsis_days, final_synopsis_final_protocol_days...

  How can I do this?

  Thank you

  Create a PivotTable and put "milestone_name" in the columns, under the labels section.
  Put 'actual_end_date' in the section of measures and to change the rule of the aggregation of 'Max '.
  The rest of the attributes keep in the lines section.

• Create a document with columns and the effects of impression

  If you create a new document and set the columns in the new menu document inside, and then subsequently create images, tables, text etc. in the document that are larger that a single column (which for example spans the whole page), will be the part of the image that is in the gutter print or see if it is saved in PDF format?

  Help!

  Thank you!

  Guides are there as a reference for you help in alignment. They restrict what or where objects can be placed or affect their visibility or printability.

  To see what your printed page, switch to Preview Mode (quick is to press W with nothing selected).

• How to create a listfield with image and text?

  How can I add images in a list. In addition, I also want to display with the image, a text. How to do?

  Help, please...

  in a listfield you use drawListRow to paint each line.
  You can use drawBitmap to paint a picture and drawText to paint the text.
  There are a few samples on the basis of knowledge, take a peek.

• How to create a page with LOV and an OK button that calls a stored procedure

  I am new to Apex but not Oracle. I did some VB, C and other emissions.
  
  I read the day 2 + and has worked in most of the advanced tutorials as well as the task of ermployee Apex 3.0 OBE. I am searching an OBE or aid as follows:
  
  I need to create a page that has a dynamic LOV which takes the NAME of the CUSTOMER as d and ID r (what I do).
  
  I need a button on the page 'Go '. Here's the use case.
  
  The user selects a customer in the LOV
  The user presses GB
  Go calls myschema.go_sproc and passes in selected LOV Cust ID
  MySchema.go_sproc did some work and retransmits a status
  Status is displayed to the user
  
  Pointers are appreciated.

  1.

  (a) http://apex.oracle.com/ Go and getting started section gives a good overview on the apex.
  (b) at the top to just right next to disconnect... you will find the help... link to help on most of the thing
  (c) ask your question here

  2 for above senario, I'll use region HTML.

  Kind regards
  Shijesh

• How to create a counter with timer and the dynamic text field?...

  I am creating a 'meter' item that uses a dynamic text box formatted for decompter.1 in increments of 3 times per second, from a specified value (so the viewer would see 3.1, 3.2 then... etc.)

  Here's the code so far:

  var counter:Number;
  counter = 3.0
  
  counterText.text=(String(counter));
  
  var timer:Timer = new Timer(300);
  timer.addEventListener(TimerEvent.TIMER, onTimer);
  timer.start();
  
  function onTimer(event:TimerEvent):void
  {
      ???
  }
  
  

  What I can't understand, is what should go in the box function for ajouter.1 seconds whenever the clock cycles. Any help would be appreciated!

  use:

  var counter:Number = 3.0;var increment:Number = .1;var upperlimit:Number = 12;
  
  counterText.text=(String(counter));
  
  var timer:Timer = new Timer(333);timer.addEventListener(TimerEvent.TIMER, onTimer);timer.start();
  
  function onTimer(event:TimerEvent):void
  {counter += increment; counterText.text = counter.toString();if(counter>=upperlimit){timer.stop();}}
  
  
  

• How to create a table with two unique columns

  How to create a table with two unique columns. I use the following syntax below and I get the error message such unique or primary key already exists.
  
  create the table COPQ_WORKCELL_GOAL
  (
  Type_id varchar2 (4) NOT NULL UNIQUE,
  Tyle_Location varchar2 (30) NOT NULL UNIQUE,
  Type_Description varchar2 (20).
  KEY elementary SCHOOL (Type_id)
  );

  Use 1 or the other column type_id;

  create table COPQ_WORKCELL_GOAL
  (
    Type_id varchar2(4),
    Tyle_Location varchar2(30) NOT NULL UNIQUE,
    Type_Description varchar2(20),
    PRIMARY KEY (Type_id)
  );
  
  Table created
  drop table COPQ_WORKCELL_GOAL;
  
  Table dropped
  create table COPQ_WORKCELL_GOAL
  (
    Type_id varchar2(4) primary key,
    Tyle_Location varchar2(30) NOT NULL UNIQUE,
    Type_Description varchar2(20)
  );
  
  Table created
  

• How to make a form with report and a form of inclusion in the same page?

  Hey, guys:
  
  I was wondering if you could have any link or examples to show how to make a form with report and a form of inclusion in the same page, these two forms are related to the same table. Our customer wants that a user can add a new row to the table in a form and see all lines created by this user in a report, the report should provide link change as well. the problem is: whenever I inserted a new line or change a line or delete a line, and submitted and return to this page, all hidden elements lost their values, this report is empty, and some display only items also lost their values. Could someone give me any suggestions?
  
  Thank you very much!
  
  Sam

  So, the problem is essentially with page elements lose their session state values when re-loading of the page. How do you define values for the elements of the hidden page? You have default values defined for those? They are based on the database column? What is the "Source" parameter for these items on the page? It is set to "Always, replace any value in session state"? You have any process of 'Empty the Cache', which is reset these values to null element?

  What is your version of the Apex?

  I would recommend that you have installed for example in apex.oracle.com. This would help to better understand the issue.

  Published by: jaouad khalifi on 13 December 2012 22:11

• How to create Hlp files with labwindows 9.0

  Hello

  I used to create the dll with Labwindows 8.5 and use them with TestStand... The advantage is that with the help file, I can add information to the Fp file and loading the DLL with TestStand, the "?" button to open the help file...

  But the problem is that I can't find help with Labwindows 9.0 generation...

  Does anyone know how to create file hlp with Labwindows 9.0?

  The procedure with Labwindows 8.5 has been:

  Modification of the PS file, then generate the Option-> windows help

  Thank you very much

  Ronan

• How to create an app with space name?

  Hi all

  How to create an application with the space, for example "Hello Word" name When I run my Simulator, I got ' Hello$ 20World "instead. I use the plugin for eclipse for development. I can see the Application descriptor for my application, and it shows the thin space. I tried to change the Blackberry project properties tab generate file output name, but it doesn't help in any way. Please advise...

  Goto Blackberry project properties

  Click the general tab

  Write in title = "Hello World".

  and you can see your title of the modified project

  I hope that you ask for it only!

• How to create a form with a submit in CC button animate using Actionscript 3

  How to create a form with a submit in CC button animate using Actionscript 3. The file will first be a SWF but will also have the flexibility to export as HTML5

  I've searched high and low for an example of code for this entry.

  Can someone help me please?

  Thank you

  You can use the same graphic assets of basis for two projects, but the coding will be different for everyone.  You must work on the project of a code at a time.

• Comment create a private with password and login access?

  Comment create a private with password and login access?

  If all you need is to grant a person/company access to a specific folder on your site (a location test for their website for example), you can usually do this from your control panel hosting account. You must consult your webhost for exact directions on how to do it.

  If you need a more robust record and the system log-in, you will need to become familiar with a language such as php server-side and a database like mySQL. DW has nothing built-in that will do these things for you, however you can use DW to encode or lining up third-party code on your site.

• How to create dummy data with 1 TB

  Hi Expert,

  May I know how to create dummy data with 1 TB to test performance. ?

  Respect of

  Liang

  what columns you want to include? Basically, you can generate as many lines as you like to connect by queries - something like:

  create the table big_t

  as

  with

  generator1 like)

  Select rownum id

  of the double

  connect by level<=>

  )

  ,

  generator2 as)

  Select lpad ('* ', 1000,' *') col1

  of the double

  connect by level<=>

  )

  Select g1.id

  g2.col1

  of generator1 g1

  generator2 g2

  ;

  Of course, it is not 1 TB, but you can change the number of levels. Who said: I think you need to find a sensitive table first structure.

• How to create a button with rollover that appears in a different place than the button when you move?

  Hello

  How to create a button with rollover that appears in a different place than the button when you move by using only the Muse (reversal may be a different shape and color of the button). I managed to do it using Photoshop and the separate layers and import it, but it is not a good solution. All suggestions will be welcome.

  Thank you

  You can try to use the widget of the Composition of the ToolTip. In this way, the trigger area is isolated and a "State of reversal" can be placed anywhere on the screen (compared to the trigger).

  • Remove the two triggers additional default
  • Set to display the targets on working capital
  • Select hide all initially.