How to create a silhouette of an image 3D?

Similar Questions

• How to create a recovery with the Image of the DVD of Windows 7 Partition?

  My laptop got screwed that I started a month on vacation and no DVD of Windows 7 with me. I think that the best solution would be a partition with a bootable Windows 7 DVD image.

  Any suggestions on how to make a? -Nigel M

  Make a Windows 7 image and store it on a separate partition

  1. create a partition large enough to store an image of your Windows 7 installation
  2 make a Windows 7 image and save the image on this partition
  3. with the program allowing you to make the image to burn it to a bootable recovery CD Imaging
  4. If you need to restore the image, insert the CD to boot and start the restore process.

  Create a System Image in Windows 7

  After you install and activate Windows 7 create a system image as a backup of your current computer in case you need to reinstall it. That will save you the trouble of having to reinstall Windows 7 and installed everything currently again, and it takes much less time to do.

  1. click on the Start Menu and type "Save", and then click Backup of your files.
  2. in the Control Panel window that appears, click the blue link to the image.
  3 create a system image window should pop up.  Select which hard disk, DVD, or network location, you'll save your image.  Click next to continue.
  4. on the next page, check disks in your system and your system for.  Once you have selected the drives, click next to continue. Note: You can select as many records as you want (if available), but you choose to include means to the greater will be the size of the image.
  5. the next window is just a review, make sure everything is correct, and then click Start backup to start the process.  It may take 10 minutes or more, so patience is needed.
  6. once the backup is complete, you? He's prompted with the option to create a system repair disc.  It's a good idea, just in case your system has problems in the future.  Click Yes.
  7 choose which disc recording drive you? He's use to burn the disc.  Insert a CD or a blank DVD for the physical disk, and then click on create disc.

  How to restore Windows 7 from a System Image
  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup

  You can also use a disk imaging hard program - they both allow you to create a rescue disk.

  Reflect disk imaging:
  http://www.Macrium.com/reflectfree.asp

  Paragon Backup & Recovery Free Edition:
  http://www.Paragon-Software.com/home/DB-Express/download.html

  Windows 7: create a Partition of Installation of system to install Windows (I nstallation Partition, not an image)
   
  (1) create a partiton of 3.5 GB at the beginning of the hard drive, then the rest of the hard disk you want to partition.
   
  (2) copy the whole DVD on this 3.5 GB partition and make the partition bootable.
   
  Open the command prompt and run the following:
   
  x:
   
  CD/Boot
   
  x:\boot\bootsect/nt60 x:
   
  (where x is your score)
   
  A message "startup code has been updated on all targeted volumes" should appear.
  Then, verify that the partition is marked "active" in disk management.
  If necessary, right-click on the partition and 'mark the partition as active.
   
  (3) upon reboot of the PC will automatically launch the partition setup and add an entry 'Windows setup' in the BCD entries. If this is not the case, change the boot with EasyBCD menu. http://NeoSmart.NET/DL.php?id=1

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• How to create modal dialog box with image

  I have this very simple modal dialog box:
  

  public class DialogPanels
  {
  
      public void initClosemainAppDialog(final Stage primaryStage)
      {
  
          primaryStage.setOnCloseRequest(new EventHandler<WindowEvent>()
          {
              @Override
              public void handle(WindowEvent event)
              {
                  event.consume(); // Do nothing on close request
  
                  // Dialog Stage init
                  final Stage dialog = new Stage();
                  // If you want to freeze the background during dialog appearence set Modality.APPLICATION_MODAL
                  // or to allow clicking on the mainstage components set Modality.NONE
                  // and set dialog.showAndWait();
                  dialog.initModality(Modality.APPLICATION_MODAL);
                  dialog.initOwner(primaryStage);
  
                  // Frage - Label
                  Label label = new Label("Exit from the program");
  
                  // Button "Yes"
                  Button okBtn = new Button("Yes");
                  okBtn.setOnAction(new EventHandler<ActionEvent>()
                  {
                      @Override
                      public void handle(ActionEvent event)
                      {
                          //primaryStage.close();
                          //dialog.close();
                          //Platform.exit();    
                          System.exit(0);
                      }
                  });
  
                  // Button "No"
                  Button cancelBtn = new Button("No");
                  cancelBtn.setOnAction(new EventHandler<ActionEvent>()
                  {
                      @Override
                      public void handle(ActionEvent event)
                      {
                          primaryStage.show();
                          dialog.close();
                      }
                  });
  
                  // Layout for the Button
                  HBox hbox = new HBox();
                  hbox.setSpacing(10);
                  hbox.setAlignment(Pos.CENTER);
                  hbox.getChildren().add(okBtn);
                  hbox.getChildren().add(cancelBtn);
  
                  // Layout for the Label and hBox
                  VBox vbox = new VBox();
                  vbox.setAlignment(Pos.CENTER);
                  vbox.setSpacing(10);
                  vbox.getChildren().add(label);
                  vbox.getChildren().add(hbox);
  
                  // Stage
                  Scene scene = new Scene(vbox, 450, 150, Color.WHITESMOKE);
                  dialog.setScene(scene);
                  dialog.show();
              }
          });
  
      }
  }

  I want to add images and make to look like this:
  
  
  
  But I admin that it's too complex for my short knowledge get the appropriate result. Can you show me how I can split dialog box, add second bottom and make my code to look the same as this example please?

  I think that you can accomplish what you want by wrapping your 'vbox' VBox in an another VBox... Let's call it outerVBox. In outerVBox, you put a node ImageView and 'vbox'. To create the node ImageView (for example):

  Image bkgrdImage = new Image(getClass().getResourceAsStream("resources/my_pic.jpg"));
  ImageView bkgrdImageView = new ImageView(bkgrdImage);
  

  And then add nodes to outerVBox:

  outerVBox.getChildren().addAll(bkgrdImageView, vbox);
  

  (And of course to create the scene instance using outerVBox instead of "vbox.")

• How to create ePUB with full-size images/pages to adjust according to the device?

  Friendly greetings,

  I tried, for almost two months, to convert/create my 7 books that are printed in electronic books; with the first edition had to be Nook, with Kindle on the list. Unfortunately, I am still working on just get the first one published! And I could really use any assistance to get this figured out. My intention was to publish several weeks ago... now my despair must publish before the weather gets too hot and the children are outdoors most of the time... or at least not later than Easter. (: 0)

  First of all, my books are books of photo/poetry for children of all ages. They were all designed in Photoshop, where I also created images full size for the first eBook. I received the specifications of B & N for the different devices of Nook. In the assumption that it would be better to create the largest files, thus allowing smaller size devices to fit the page accordingly to fit and the most important would not encumber a smaller image, I size my pages to 1280px x 1920px at 72 dpi. (now I hear 150 is standard?)

  My text is included in the image that design is an image = a single page. I've included a version only the full text of the poem/story at the end for those who want to set the text or use a voice reader. I obviously all original, but for the publication they were all saved as jpg.

  After a fight and a lot of frustration, I managed to finish the manuscript for Barnes and Noble Nook press Manuscript Editor. My internet is molasses and so much of this has been done in the wee hours of the morning when the rest of the time zone is asleep. I had only a page with a problem, an additional empty line/space was irreparable. I published and it had been completely sloppy to be published, although the preview looked a-okay. Only on the upper left of each image/page 1/6 was visible in the corner of my laptop to PC or Nook of my Tablet Android App. So I desperately waited another 10 hours, hoping that no one would buy my book Meanwhile, so he could be removed from the sale.

  I downloaded a demo of InDesign CC, and after two weeks of not even being able to create a new single document for some reason any twisted, I bought a month membership. So far, I am not entirely convinced of this creative Cloud malarkey together, as much... that, like I said my internet is slow... it took me nearly 20 hours just to download the software. (It is really difficult to provide records, seriously?) After a cat and a phone call that I can, in theory, now use InDesign.

  I created a new Document for Digital Publishing to the above specifications (1280 x 1920 px). I did rectangle the size of the page placeholders and place one image per page. This usually inserted the image to 50% and I have to select 100%, and then move them if necessary to place.

  So my first question is: is it possible to place an image at 100% without having to do this step further resizing? Or is there another way to place the image in the size of the page without any of these other measures that would be too good.

  Well, after placing several pages/images I have also selected each and went to Options of Export Object and checking the rasterization of Custom and "resize to text Flow.  I then exported ePUB trial to see how it would look. On the PC and tablet in landscape mode it was far better than the other, but about oh 1/3 from the bottom of each page was cut. On the Tablet, I turned to portrait and voila full page. Woohoo! But alas, I don't want to limit it.

  is there something I am doing wrong? Did I miss a step or two somewhere so that the complete picture should appear on the page? I feel like I'm about to turn the page on this thing, but he's stuck in the one after that.

  I would greatly appreciate any insight, advice, help anyone can offer. I ran the gauntlet of Barnes and Noble... cough, cough... support and apparently I ask questions that cannot respond to any press corner rep and the forums out there have no idea about InDesign. It's almost like with all fantastic beautiful screens out there today nobody wants to picture books! How National Geographic?

  Thank you very kindly.

  In case it is necessary: my laptop using Window 7 64 bit Pro, InDesign CC is 64-bit and my 10.1 Android tablet. I can view the EPUB files in the corners for PC and Nook for Android. I also have a Kindle, LumiRead and various other applications on the tablet. I also have someone get a glimpse of the finished epub, if needed, on a Mac, iPad, or Android phone... even if I don't have not one of these. Don't know who has a corner I can look good. Thanks again.

  Q: is it possible to place an image at 100% without having to do this step further resizing?

  Here I think you want your images to fit within size full page automatically. For this, you can try the following steps:

  1. create a new doc

  2. menu Goto object, and then choose image mount options

  3. Select adjust automatically and fitting drowdown, select "adjust the content to the frame. See the screenshot below:

  

  After that, your images should adjust automatically in full page placeholder images. Please let me know if this does not work or if the problem you are experiencing is different and I did not understand your problem correctly.

  Kind regards

  POOJA

• How to create a file with 2 images displayed side by side?

  Hello

  I have two photo files and I just want to create a folder, displaying two pictures side by side.  I studied all the functions in my Adobe Photoshop elements Version 11 and I can't understand how do.

  Thank you

  Kevin

  Hi Kevin

  Open both of your images in expert mode - they will appear in the photo tray.

  In the top menu click on file > new file empty

  Choose your width and height, and resolution (72 for PC/web) or 300 for printing and the background color set to white or whatever you prefer.

  Drag your first image of the photo tray to the top on your model. Select the move tool to drag and where you want. You can also drag the handles to angle to scale/re-size.

  Repeat for the second photo and when registered as a PSD to preserve the layers for futire editing or use the file > save as to create a jpeg file.

• How to create a brush from an image on a black canvas (image included)

  I can't remember how to do this although I don't know that I've done it before. I created an image on a black canvas. Now, I want to use this image as a brush, but I can't seem to remember how to get rid of the black background.

  Can someone point me to a tutorial or help out me? (I work in the PS5 incidentally)

  Hi wolkske,

  Firstly, I reversed the image by pressing Ctrl-I or Cmd - I on mac. Then, I use the marquee tool to select the area I want to do as a brush. Then edit > define Brush preset

  Here is my result

  

  You can also use this tutorial as a reference

  http://www.YouTube.com/watch?v=d9AQE3rPPfU

• Video editing in PS: how to create random noise on each image

  Hello PS community,

  I do a lot of video editing in PS with my DSLR video files, because I like how PS treats the colours etc and I'm used to all the corrections due to image editing. It needs time for the export/rendering, but for me it is worth.

  I'm not really satisfied with the plugins in video editors that simulate the grain, so I thought that I can do better in PS. I created a grain/noise, who expects a lot from me. I created a new layer with noise created with the original PS-noise-plugin and adjust the mode of fusion etc to achieve a look that I like, and it looks great when the movie does not play.

  When the movie/animation plays the film will play under this layer of static noise that is unnatural looking.

  I want to achieve is that the PS will be made the layer of noise for each new image (creating an individual noise for each image layer) so that the film is natural looking.

  Thanks for your help!

  Best regards

  David

  So I suppose you could create an animation of noise and that are superimposed as a smart object, too.

  Depending on how long it is supposed to be to avoind, noticing the repetition just create as many noise-layers in a separate file, use the images made of layers and file > export > rendered video.

  Or you could create greater noise layer and around shuffle manually in the animation timeline.

  But maybe someone else has more insight in this matter.

• How to create a link on an image

  Sorry for the question of basic but I'm totally new to Flex. I am trying to find how to do this simple HTML in Flex - without the help of the mx:htmlText tag:
  
  < a href = "www.adobe.com" > < img src = "adobeLogo.jpg" > < / a >
  
  ?
  
  I tried to create a linkButton, but I'm not able to put the link of the image.

  put a method click on the image and use of the service:

  var u: URLRequest = new URLRequest ("http:www.yourdomain.com");
  navigateToURL (u);

• How to create a Signature with Logo Image to e-mail

  I would like to create a signature that includes the logo of the company for which I work.

  I found this web page (http://gatheringinlight.com/2007/12/03/how-to-make-an-html-email-signature-for-a people-mail /), but I do not have a Mail folder in my library folder, so I don't know how to proceed.

  Here is an example of what I would...

  Leonardo a. a.

  Internet Sales Manager

  QuickQuote marriage

  

  Use: iMac (21.5 inch mid 2011), OS X Yosemite (10.10.1)

  < personal information under the direction of the host >

  You can use the menus to Format or change in Mail to change the font or layout, transform the text in links or check spelling. To add a picture, drag the file in the preview.

  Complete instructions are in the KB Article (Yosemite) Mail: include signatures in messagescreate a signature section.

  I do not have a Mail folder in my library folder

  You should!  Probably because your OS is outdated.  Your profile confirms that you are using (10.10. 1).

  Software Update/App Store to update your operating system OS 10.10. 5. or Download OS X Yosemite 10.10.5 Combo update.  In addition, the update all SU/AS has to offer for your computer.  Once completed, repair permissions and restart your computer.

  In addition, Please update/correct your CSA profile to show your info up-to-date.

  

• How to create the recovery disk from image on another laptop?

  Hi guys,.

  I have a laptop where the recovery partition was reformatted somehow.
  Although I used partition recovery software to recover the original partition, the original system partition containing the Creator program of recovery was also missing.

  I was wondering if just, is it possible to create a recovery disc install creator on another computer Toshiba Recovery disk, extract the image from recovery partition and then create image recovery disc?

  See you soon

  Hello

  Unfortunately, I have to disappoint you. It is not possible.

  I had the same situation after partitioning my hard disk, he disappeared and did not make a recovery disk.
  You can order the new silver recovery disk:
  https://backupmedia.Toshiba.EU/landing.aspx

  or get a copy of Windows and install it. Then, download all the required drivers and enjoy.

• How to create a vertical menu with images instead of text

  So guys, I have this site simple House with pictures on the left that links to the different pages of the document.

  I prefer to replace it with a vertical menu, but I don't want to use text only images.

  How can I do?

  Hi, its simple

  Its simple, please follow the steps shown in the screenshots below.

  

  Let me know if it works for you.

  Kind regards

  Ankush

• How to create a vector from an image with a white line

  I need help as soon as possible.

  I have a design that I made in Photoshop CC 2014 and I need to make a vector. I was told the best way to proceed was to file in Illustrator CC 2014, which is what I have, but every guide I followed takes off the white line that goes around the text and extends beyond the tree. I need this white one to be there and it's so frustrating that I can't find a guide that will help me keep it there!

  Please, if anyone has the solution, please describe in DETAIL. , I have included the image, I work for example. I put a background black on it so you can see the white line which must remain outside the vehicle. The black background will not be outside the final vector.

  Matt,

  According to me, you can do the following:

  Come back to Photoshop and create black background like a rectangle, then the raster work is separated into two:

  The one with the red/white text on black background and the other with the tree on black background.

  Image then trace each and expand each track and then line them up by the outermost paths (tracing the outside shape of the black rectangles that must be identical).

  Then take it from there, with full marks.

• How to create small PDF files with images of reasonable quality?

  Help me Obiwan Adobe!

  There seems to be several utilities on the web that claim to do this, but I thought I ask first of all experts. There must be some sort of step by step technical describes a place that allows you to create PDF files that have reasonable quality but which do not come with such extreme weight they can not be sent by e-mail.

  I saw suggestions ranging from using the footprint of the PDF in InDesign feature (sometimes it works, sometimes not), export from InDesign with the preset PDF/X1a (used to work ok, but now seems not chewable files down, as they used to) to adjust preferences for a lower screen resolution - not in export or save as dialog box - then saving it under a reduced size. I tried almost all the techniques I've seen but in vain.

  So I guess there is something that I am missing. Building a file InDesign you want to compress severely, is best to use JPEG files or other PDF files or something else for placed images?

  I know it's asking a lot and clearly native features of Acrobat are not much help, but I have several uses for this. I do a lot of book design and prefer to send drafts for customers who are at least pretty good for them to watch without blurry images. I would also like to set up a portfolio PDF that does not require the sending by FTP. In fact most of the places that ask for my PDF portfolio want less than 1.5 MB. It seems impossible.

  So there you go. Somebody needs to write a book. In fact, if I get a good orientation, maybe I'll do it.

  Thank you

  . Jpg can be a possible reason for blurred images. JPEG files are not generally recommended for use with PDF files, although many people use. Usually, TIF or PNG are recommended for bitmaps with PDF files.

• How to create a review of several images in a single file?

  Hey there,

  I'll try to find a way to get several photos as soon as possible in a single file that I can sent to my friends to see (they have Lightroom). I tried to do that in LR but looks like that's not possible is it? Then I thought of Keynote to do it, but once I have import in the App, it shows all merged in one place. Any idea?

  How about this: select layout Sheet of Contact and use one of the templates provided with LR in Model Explorer (4 x 5 contact sheet...)?

  Images marked in the film will be 'auto-rempli' If you select use: Selected Photos in the toolbar under the area of the image.

• How to create keyframes to move the image in Bay window during video

  I have setup an image in the video image.  While I see the option to add keyframes in the opacity, time remapping, etc., I see not possible to add under the Motion keyframes.  What I want to do a post for my window so that it is out of the screen at the beginning of the main video (set keyframe) and then set another keyframe with my window positioned where I want, a second keyframe.  but no key frame only option here.

  Is there another way to do what I want?  I want to be able to move my windows pip during playback of the main video.  Keyframes would work perfectly.

  Sorry, I'm new on this product.  So, if the solution is obvious, forgive me.

  Malibu.

  Look a little harder in Motion which window.

  Keyframes are there.  Toggle open to reveal.