How to create a temporary table in a procedure.

Similar Questions

• Create temporary table in the procedure

  I have a procedure which can be called at any time by multiple users. So I cann't use table in there, because on each call, the table is truncated and inserted. How can I create a temporary table in the procedure?

  Temporary tables in Oracle are different from other RDBMS like SQL Server.

  In Oracle, you create a global temporary table ONCE as part of the design of your database.

  create a global temporary table MyTableName (... columns...) on commit preserve rows;

  You can then use this table in your code as you would any other table.

  The difference is that any data that you insert in this table are only available/visible so that the code runs in the session, and if delete you / truncate the table it only removes the data for this session.  In this way, several sessions we can table without interfering with each other.

  (Note: instead of "preserve" you can change this to "delete" If you want that deleted data automatically when a commit is issued in your session, otherwise the data will be automatically deleted at the end of the session)

• How to create temporary tables in stored procedures.

  Hello
  
  I am new to oracle, I have a requirement where I need to run a query in a loop for different values of where condition. Here, I need to record the results of the query on each iteration. After the end of the loop, I need to send the results to the front end. I did a lot of research for the concept of the temporary table in oracle, but I found myself unresolved except headaches. Everyone is showing how to create temporary tables in general but not in stored procedure.
  
  Bad, I need the concept of temporary tables, or is there an alternative way to store temporary results. My procedure looks like this.
  
  create or replace
  procedure uspMatchCode (parWord varchar2, p_recorderSet to types.cursor_type)
  as
  smallint parCnt;
  Start
  parcnt: = 0;
  Select count (1) in parCnt of...;
  If parcnt > 0 then
  Open for P_recorderSet
  Select field1, field2, field3,... of table1, table2, table2 where < < condition > >
  on the other
  -Here, I want to create a temporary table and store the result for the loop shape into the temporary table.
  CREATE TEMPORARY TABLE global my_temp_table (NUMBER of Column1, Column2) ON COMMIT DELETE ROWS.
  FOR parCnt in 0.3
  loop
  INSERT into my_temp_table select Field1, Field2, field3,... from table1, table2, table2 where < < condition > >
  end loop;
  Open for P_recorderSet
  Select * from < < temporary table > >
  end if;
  end;
  
  Any help would be great to check me on the problem.
  
  Thank you
  Kiran.

  This is a change to the query Kiss has posted:

  with data_text like)
  Select regexp_substr (' sales financing marketing ',' [^] +', 1, level ") val
  of tconnect by level<= length('sales="" finance="" marketing')-="" length(replace('sales="" finance="" marketing','="">
  )
  Select * from t, data_text, where t.colname like '% "| data_text. Val |' %'

  This will help you. Please change the column names and the name of the table as a result

• How to create the logical tables &amp; how to give joints according to obiee 11g?

  Hello

  I have again to obiee 11g. I want to create the logical tables in MDB layer.

  After that I want to give joins according to MDB.

  I don't know, how to create the logical tables and how to give joints according to obiee 11g?

  Please help me.

  Thanks in advance,

  A.Kavya

  Hello

  The new logical table is right click on the MDB itself, for the join you generally in the business model diagram (again right click on objects).

  Maybe it's better if you start from a kind of tutorial to at least have an overview of what is happening where (layer business and physical layer etc.).

  Take a look at what Oracle has available: Oracle BI EE 11 g

  And no doubt, it can be a good start: https://apexapps.oracle.com/pls/apex/f?p=44785:24:0:NO:P24_CONTENT_ID, P24_PREV_PAGE:9787, 2

• May not know how to create a repeating table to PDF forms in InDesign

  Hello!

  It's all in the title. When I have my table with my header and footer, I can't understand how to create a repeating table for all users of my PDF files interactive.

  Thank you for your help,

  Will be

  If you mean that you try to create a table with entries from forms that develops by creating new topics, I'm sorry to tell you that is not possible in InDesign. It is not yet possible in Acrobat. The only software that takes in charge who is LiveCycle ES Designer that creates some XFA forms, a type of form which becomes less support in the future.

  -Dov

• Create a temporary table using EXECUTE IMMEDIATE

  Hello

  I need to create a report more complex which must have three different queries. I use a determined IF clause that the query that uses the report, according to the parameters.

  I want to write the output to a csv file, so I created a PROCEDURE.

  The first package of the procedure has the three SQL and the IF clause in order to determine the query that the report uses and stores the query code in a variable (v_sql), which is passed to the PROCEDURE that needs to write to the output of the report.

  I tried to create a table with data from the request in order to make a LOOP and exit, something like this:

  WRITE_FILE (errBUFF of the PROCEDURE	OUT VARCHAR2,
  	retCODE	OUT VARCHAR2,
  	v_sql	IN VARCHAR2)

  IS

  Contor

  NUMBER;

  BEGIN

  	EXECUTE IMMEDIATE v_sql;
  	SLIDE G
  	IS
  	Select * from XXROR_REG_MF_TBL;
  	--
  	-initialization
  	--
  	retCode: = 0;
  	errBUFF: = NULL;
  	Contor: = 0;

  	--
  	-cursor
  	--

  	FOR X IN G
  	LOOP
  	APPS. FND_FILE.
  	PUT_LINE)
  	APPS. FND_FILE. OUTPUT,
  	....)

  I should mention that v_sql is something like:

  CREATE GLOBAL TEMPORARY TABLE ACEs (SELECT * of the double);

  I can't really do that, so I was wondering if you have any suggestions

  Thank you

  Claudiu

  Hello

  I don't think you need a table at all. You can set the cursor based on the SQL passed as parameter

  https://docs.Oracle.com/database/121/LNPLS/dynamic.htm#LNPLS629

  Concerning

  Marcus

• Create a temporary table as select fails... Why?

  Hello, I have this simple stored procedure
  
  PROCEDURE prueba_cursor is
  BEGIN
  
  CREATE TEMPORARY TABLE global emp_tab ON COMMIT PRESERVE ROWS AS
  SELECT T.STATUS_CD IN THE T_CRES_FILES T;
  
  
  END prueba_cursor;
  
  I get the following error
  
  "PLS-00103: encountered the symbol"CREATE"when waiting for one of the following values:
  
  (begin case declare exit for goto if loop mod null pragma
  raise return select update while < ID >
  
  
  "
  
  What's not here?
  Thank you

  Xavi says:
  Hello, I have this simple stored procedure

  PROCEDURE prueba_cursor is
  BEGIN

  CREATE TEMPORARY TABLE global emp_tab ON COMMIT PRESERVE ROWS AS
  SELECT T.STATUS_CD IN THE T_CRES_FILES T;

  END prueba_cursor;

  I get the following error

  "PLS-00103: encountered the symbol"CREATE"when waiting for one of the following values:

  (begin case declare exit for goto if loop mod null pragma
  lift the back updated select everything with

  "

  What's not here?
  Thank you

  You can't put DDL statements directly into the PL/SQL like this. Why you wrap upward in a PL/SQL procedure anyway?

  Why not:

  CREATE GLOBAL TEMPORARY TABLE  emp_tab ON COMMIT PRESERVE ROWS AS
        SELECT T.STATUS_CD FROM T_CRES_FILES T;
  

  directly as SQL?

• Create a temporary table and insert using a select statement

  Hello
  
  I tried to create a temporary table and insert it by using the value in a select statement. Please see below the code
  
  ---
  CREATE a TEMPORARY TABLE GLOBAL Temp_Test
  (
  DATE OF DAY_FUTURE
  )
  AS
  SELECT TO_DATE (SYSDATE + ROWNUM, 'DD-MON-YY')
  DUAL CONNECT BY ROWNUM FROM < = 14)
  ---
  
  As soon as I run the script, the error message indicates the following:
  --
  
  Error from the 1 in the command line:
  CREATE a TEMPORARY TABLE GLOBAL Temp_Test
  (
  DATE OF DAY_FUTURE
  )
  ONLY select TO_DATE (sysdate + rownum, 'DD-MON-YY')
  Double connect rownum < = 14)
  
  Error in the command line: 2 column: 1
  Error report:
  SQL error: ORA-01773: cannot specify the types of data in this TABLE to CREATE column
  01773 00000 - 'cannot specify the types of column data in this TABLE to CREATE"
  * Cause:
  * Action:
  --
  
  
  What seems the problem? I already have the data type such as TO_DATE on my select statement.
  
  Any help would be appreciated
  
  Thank you

  SQL> CREATE GLOBAL TEMPORARY TABLE Temp_Test
    2  (
    3  DAY_FUTURE
    4  ) on commit preserve rows
    5  AS
    6  SELECT TO_DATE(SYSDATE+ROWNUM, 'DD-MON-YY')
    7  FROM DUAL CONNECT BY ROWNUM <= 14
    8  /
  
  Table created.
  
  SQL> select count(*)
    2    from temp_test
    3  /
  
    COUNT(*)
  ----------
          14
  

• Dynamic temporary Table in stored procedure

  Dear expert,
  
  I'm trying to convert a database from MSSQL to Oracle 11 g. But I'm a little stuck on dynamic temporary tables in stored procedures.
  
  MS is normalize the data out dynamic SQL statements. In TSQL so I've created a Temp table with the number of columns that the SQL statement has, that I executed the SQL statement in the temporary table and then I was going to all the columns with the prompting separate command standard. Finally, I wrote the key table.
  
  If I want to do this process with only on SP, dynamic, rather than to define for each normalization process its own SP, so this possiple in Oracle?
  
  For example. "INSERT INTO Temp (PartNo, Descr, Type, price) SELECT PartNo, Descr, price from parts.
  
  PartNo. Descr | Type | Price
  AB00 | AKER GD245 | Monitor | 200.00
  AB01 | Samir QQ22 | Monitor | 120.00
  AQ05 | HB 5500DN | Printer | 550.00
  
  SELECT @R = Max (PartKey) of N_Parts
  INSERT INTO N_Parts (PartKey, PartNo) SELECT RowNum + @R, PartNo FROM (SELECT DISTINCT PartNo FROM Temp INCLUDING PartNo NOT IN (SELECT PartNo of N_Parts));
  SELECT @R = Max (PartDKey) of N_PartsDescr
  INSERT INTO N_PartsDescr (PartDKey, Descr) SELECT RowNum + @R, Descr FROM (SELECT DISTINCT Descr FROM Temp WHICH Desrc NOT IN (SELECT Desrc from N_Parts));
  ...
  
  Insert into Part_Data (PartKey, PartDKey, PartTKey, PartPKey)
  SELECT T0. PartKey, T1. PartDKey, T2. PartTKey, T3. Temp PartPKey T
  INNER JOIN N_Parts T0 to T0. PartNo = T.PartNo
  JOIN IN-HOUSE...
  
  So what is the best way, do not generate this dynamic Table Temp?
  
  Published by: 926165 on 08.04.2012 08:26

  926165 wrote:
  I'm trying to convert a database from MSSQL to Oracle 11 g. But I'm a little stuck on dynamic temporary tables in stored procedures.

  Just my 2 cents here.

  Conversion of database provider A to B of database provider is never really a great idea. The products are fundamentally different in many ways. Analysis of demand that needs to be ported from database at database B and then its implementation in a specific way to take advantage of the features of your new environment, accounting for all the differences between the implementations of provider will be your best bet.

  I say this because, for me at least, a conversion means that you take what you have and it in slam in what you need. The better approach is to analyse, design (to explain the differences in behavior between vendor implementations, such as mechanisms for read consistency) and proceed from there. This way, you have a solid base on which to start, instead of a skyscraper built out of toothpicks.

  See you soon,.

• How to create the cursor in a stored procedure

  How to create the slider in the stored procedure. I want a simple example
  procedure - cursor - open-fetch - insert - last slider farm
  any idea or examples... Please help friends
  
  Thanks in advance

  Hello

  Search for explicit cursors in this link

  http://download.Oracle.com/docs/CD/B28359_01/AppDev.111/b28370/static.htm#insertedID2

  Kind regards
  Prazy

• How to create a second table containing the first?

  I have a table with data source. I would like to create a second table that feeds these data. I will use the second table for the filtered views, etc. I am currently copying a range of cells through, referring to table 1. However, if a new line is added to table 1, it does not table 2. How can I configure things so that any changes - including the new lines/columns would be automatically carried over to table 2?

  Table 2 cannot automatically grow the new rows or columns. If you want it to be completely 'automatic', your second table must be as large or larger than your first picture will be never. In other words, there need to additional rows and columns to allow growth. If is not bigger than 1 table, when you add rows or columns to the table 1, you must also manually add rows or columns to the table 2.  The problem is that all these lines/additional columns in table 2 will have formulas that are referred to non-existent rows/columns in table 1, which is a mistake. What you do next depends on what you do with table 2. If it is just for display of data and your existing formulas are all as = 1::A1 Table, you can change to = SIERREUR (array 1::A1, "") to get rid of the errors.  To hide all blank lines, you can set up a filter to show only the rows where column A is not a space (for example) character. There is no filter to hide additional columns, however.

• How to use SQLite temporary tables?

  As read here: http://docs.blackberry.com/en/developers/deliverables/8682/BP_Optimizing_SQLite_database_performance...

  Use temporary tables. Do this only if you do not need data to be available following a reset of the BlackBerry device.

  Read here: http://www.sqlite.org/tempfiles.html

  Tables created using the syntax "CREATE THE TEMP TABLE" is visible only to the connection of database in which the "CREATE TEMP TABLE" statement is initially evaluated.

  The confusing part is that if I create an instance of database for temporary tables with a single statement of DatabaseFactory.open, I am only able to use this same instance of database throughout my entire application?

  So, using the same variable throughout the entire application?

  It also means that I can not close the database connection?

  Here is information on temporary tables of SQLite:

  http://www.SQLite.org/tempfiles.html#tempdb

  (1) you must call 'CREATE TABLE TEMP' every time when you open a database if you need this chart.

  (2) temporary table deleted as soon as you close the database. This means you need to keep the database connection open if you want to run previously inserted/updates of records into a temporary table.

  Thank you

  Eugen

• How to create the monthly table is created?

  Hi guys,.

  Impossible to create the table for each month in the analytical database, but to load the data in the previous table continues as the screenshot attached, schema user has the privilege of creation. We use Webcenter interaction 10gR 4.

  How to create monthly creating the table please?

  Thank you

  Katherine

  Hi Trevor,

  Thanks for your help.  We were able to create table and load data to attached Apr.

  However the analytical user privilege has changed the APR because of the operation of the server.

  Since then, there was a message saying that there is no permission to create tables in the crawl log.

  analytical user privilege was granted after checking this message, as I suspected, the problem occurred after you change the analytical user privilege.

  Currently, Analytics is granted with all the privileges.

  Any idea please?

  Thank you

  Kathy

• How to create a partitioned table

  Apex 4.2

  Oracle 11g

  There is a large table, which have 160000 rows, I would like to create a partitioned table to improve performance, but could not find a way to create a.

  Concerning

  Hello

  I don't see how your question relates to APEX, unless you mean how to make APEX builder object Explorer.

  Answer is simple, you can do it from the object browser.

  You should write a ddl script to create the partitioned table, and run it from sql commands.

  Kind regards

  Jari

• How to create a temporary database account...

  Using Oracle 11.2.0.4:

  What is the easiest way to install and create a 'temporary' account in the database for a person.

  In our case, I want to create an account which hang in 60 days.

  I was thinking about defining the PASSWORD_LIFE_TIME expires in 60 days, and then the password_verify_function to something that would essentially make the password cannot meet the criteria, but I don't know how to do that with this package of Oracle.

  I thought that to set up a trigger onlogon to check if the sysdate is some date back 60 days now and if so, the account lockout.

  But I was wondering if there was an easier way to do when creating the user account.

  I don't want to create an externally authenticated account.

  I thought that to set up a trigger onlogon to check if the sysdate is some date back 60 days now and if so, the account lockout.

  But I was wondering if there was an easier way to do when creating the user account.

  If it were me, I'd create just a task in Oracle Scheduler to run 60 days now. The job may run the following PL/SQL block:

  BEGIN

  EXECUTE IMMEDIATE 'alter user temp_user account lock;

  END;

  /

  Do the job for execution once and remove it yourself after completion. In this way, there is there no persistent artifact that later needs to be handled.

  Go a little further, why not drop the account instead of locking it?

  See you soon,.
  Brian