I have no sound on the tv when it is connected to my toshiba satellite

Similar Questions

• No sound from the Clip when it is connected to the car charger and car s in the

  I just got a car charger for my 8 GB Clip. I have the Clip connected to the connector of the car aux in, and it plays beautifully this way.

  However, when I connect the car charger, which is a fact by Motorola for a mobile phone, the sound of the Clip completely stops.  There is no sound at all.

  Even if I barely touch the metal of the car charger USB plug to the USB port of the clamp, the sound cuts.

  A ground loop isolator would correct this problem? The comments that I have read of these say all that they helped with motor and alternator noise, but I don't have that.  I have no sound at all, even if the Clip is loaded and he continues to play according to the display of the item.

  I checked the car charger works well because I have a box of jump with a record of 12 VDC (just like in the car).  The cool Clip and plays with a helmet with the Motorola car charger in this configuration very well.

  Any ideas what is wrong and how to fix it?

  Thanks in advance.

  Just for this follow-up, the ground loop isolator completely fixed the problem I had with the sound cutting on my video in the car.

  The one I chose was the PAC SNI-1/3.5 RCA noise filter.  He goes online with 3.5 mm cable to the and has a socket on one end and a plug on the other.  It would have been cool if he had just had two male connectors, because then I could have plugged one side in the Clip and the other in the input of the car Jack.

  There is no significant deterioration in the sound, and now I can load the Clip while listening.

• Re: Want to HP dv7 - no sound on the TV when it is connected via a HDMI cable

  Hello.

  I would also like to ask for help because I'm faced with the same question.

  what I'm trying to get a sound with HDMI, it will not work...

  Delfim João

  Hi @Delfim ,

  Thank you to visit the Support Forums HP and welcome and thank you for all the information about what you tried. I looked in your question about your computer laptop dv7 HP ENVY and the problems of sound with an HDMI cable connected.

  Try this fix.

  1. a click right icon "speaker" (right)
  2. Select playback device
  3. click right speakers
  4 activate and as default
  5. click apply/OK

  This is a general document on the resolution of the problems with the HDMI connection.

  With the HDMI cable you have restarted the laptop?

  Have you tried another cable?

  Hope it will be useful.

  Thank you.

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• No sound from the headset when using hdmi

  I use the HDMI for a big screen, but with this use, the headphone is turned off. I need to be able to use the HDMI for the monitor and the headphone jack for sound.

  If you have no sound with the plug HDMI is connected, it means that your current sound settings are set for audio must be set to the HDMI output. Go to sound settings and pass parameters of HDMI output for speakers.

  Open Sound by clicking on the Start button, and then click Control Panel. In the search box, type sound, and then click sound

  In the Audio window, select the playback tab
  Replace the default value with the green mark check speakers with HDMI connected.

• Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

  

  This is a double post of a following:

  Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

• Whenever I have to download a trial of After Effects or any other applications it will indicate your download begins to start but nothing downloads... It is not even came in my creative cloud. And I don't have a page of the application when I open creativ

  Whenever I have to download a trial of After Effects or any other applications it will indicate your download begins to start but nothing downloads... It is not even came in my creative cloud. And I don't have a page of the application when I open creative cloud. Help, please

  N ° 1)

  Click on the link below and open Photoshop Elements download link.

  Note: we are not anything downloaded from the page of Photoshop Elements.

  Do not close the page, just keep it open.

  Download Photoshop Elements products | 10, 11, 12, 13

  Then click on the link below and download the installer directly mentioned in step 2.

  
  

  Step 2)

  
  

  http://trials3.Adobe.com/AdobeProducts/AEFT/13/OSX10-64/AfterEffects_13_LS20.dmg

• Since the upgrade to the latest version of firefox, I don't get the padlock when it is connected to a secure site. Is this normal?

  Since the upgrade to the latest version of firefox, I don't get the padlock when it is connected to a secure site. Is this normal?

  The lock has been replaced by the site identity button, for details on use, see https://support.mozilla.com/kb/Site+Identity+Button

  If you want to add a padlock icon in the address bar, you can use the add-on locks- https://addons.mozilla.org/firefox/addon/padlock-icon/

• my widget browser continues to feed widget showing 'failed' and keeps saying ' failure widget feed and be sure that you are connected to the internet "when I'm connected to the internet. How can I fix it?

  my widget browser continues to feed widget showing 'failed' and keeps saying ' failure widget feed and be sure that you are connected to the internet "when I'm connected to the internet. How can I fix it?

  Widget Browser disappeared.  Adobe pulled the plug on this subject quite earlier.

  See that this related discussion from earlier today.

  Widgets a go go

  Nancy O.

• vSphere client does not display does not import an option of the machine when it is connected to vCenter

  Hello

  I just got a new PC and installed all my applications, but the vSphere client does not show the import, an option of the machine when it is connected to vCenter, ideas, why not?

  Thank you

  Hello

  Hello from the Canada

  You must install the converter Plugin into your new PC

  Go to Plugins, then install the converter one.

  Concerning

• HP laptop G72: no sound on the tv when streaming movies, videos, etc.

  Audio works on my HP laptop, but when I stream from the internet there is no sound coming through my TV with HDMI connection.

  Hi @7delnann7,.

  Thank you for your query.

  I understand that after upgrading to Windows 10 you don't have audio when the flow from the Internet to your TV via an HDMI connection.

  You did all your Windows updates?

  Have you ran the Windows troubleshooting tool?

  Here is a link for laptops HP - troubleshooting HDMI screen and sound Issues with steps to try.

  If you like get help please provide your exact model of laptop G72.

  
  

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

  Good luck!

• I have no sound on the computer after you have reinstalled Windows.

  Hello

  I just reinstalled Windows 7 on my PC and I was a little proud of myself, have internet, email, video works... but then no sound. :(

  So the most common answer seems to be getting the correct driver.

  I have a motherboard ASUS P7-P55-M, I went to the ASUS website and got the best audio driver for this mobo, which is: VIA_Audio_V6019500_XPVistaWin7.

  I therefore installed that, and then one encouraging thing is that DURING the installation of this audio driver, my speakers made a sound that made me think that they are the least recognized, or this audio driver is at least to see them there?

  But then after the reboot, I still have no sound.

  So I tried to look at the specs for this mobo, and saw the audio chip itself is VIA VT1708S. So I followed the links and found a driver for it, but after I installed that now, it seems that it is just a version still newer same driver (the preceding being 9500, 10200 or this is what it looks like.)

  in any case, this newer version and the one outside the site of ASUS, as well as older drivers, I think, just install a version or one that other: HD VDeck.

  Common responses include at this time something about the Realtek drivers (can't see how tho so it shall not apply, or using those on drivers THROUGH), or Windows Troubleshooter, or something in the playback functions, or an old or Windows driver conflict with these new?), but I have tried these things (or I thought I did lol).

  But I still have no sound on my speakers.

  Very frustrating because it feels like I'm 98% done my re - install, and it looks like its just some simple setting somewhere in Windows or this HD VDeck that will get things working.

  Any help would be greatly appreciated! :)

  Original title: speakers work not after fresh windows 7 installed, please help!

  Hello

  Thank you very much for your answers. :)

  I formatted completely, no folder Windows.old and also no printed dxdiag, I myself for the kicks, which I'll make sure to have next time lol.

  Device Manager is fine, I went over that and basically each sound option of Windows or menu, that I could find, which made me think the problem somewhere else.

  So I took the suggestion of Nirmal and used automatically diagnose it and fix the link he provided. Suggestions of the convenience store has really helped as much as he said everything has been updated, or was not a problem, but what I noticed, it was what a screen in the Microsoft Fixit program running:

  Resolution of Windows Audio playback problems

  Which of these devices you want to troubleshoot?

  Select the device that you are having problems with. If the device is not listed, select device are not.

  Speakers - VIA High Definition Audio (the connector for this device is located on the front of the computer).

  Interface SPDIF (TX0) VIA High Definition Audio (the connector for this device is located on the open or pull-open sliding panel at the back of the computer).

  Output HDMI AMD - AMD high definition Audio Device (Connector for this unit is located in the HDMI connector).

  Unlisted device.

  Now when I continued from here, I don't have all the answers useful, but it makes me start thinking about the plugs/connectors themselves, rather than the drivers or anything else.

  So, I've discovered that my audio interface (HD VDeck) installed with the audio drivers of my motherboard, has no options is disable the jacks on the front panel, or the possibility of re - configure jacks how you want. If you want your speaker system to get out the same plug as it was before, you MUST be able to reconfigure your catch. Otherwise, making default value for your speakers, according to the drivers from the manufacturer of your, is actually not the green plug, I used, but among the other instead. This other outlets, or maybe even just the front headphone or microphone jack will work instead.

  So to summarize:

  If you did a clean install of Windows 7 (or a similar version), and that you have installed the drivers of your sound and re-configured your settings Windows Sound (speakers as value by default, etc.), then you did everything up to this point correctly. At this point, you MUST have an audio program like Realtek, which allows you to reconfigure or disable the catch. Otherwise, your speakers, by default, is no longer just the audio jack green we are accustomed to, but rather another "back". You MUST use the other rear socket (most likely the speaker FRONT plug), or one of your jacks façade, in plugging your speakers instead.

  This may sound funny, but this workaround works, unless you get an audio program to reassign the normal green audio jack.

  I looked at hundreds of messages on the last few days trying to get this resolved. I wish I could go back and share this info with all these people now lol.

  Thanks for the info, and please share with all those who have problems with Windows reinstall and sound.

  Kind regards

  Brad

• G6-1b70us Pavilion. Picture but no sound from the tv when you use HDMI. Worked without problem.

  I have a pavilion g6-1b70us I'm trying to connect my TV with an hdmi cable.  I get a picture but no sound.  Previously, this worked without problems.  When I shoot to the top of my reading of the sound settings, the only options are speakers and the headphones.  When I shoot to the top of my devices, the Samsung TV is there, but it is described as a "generic monitor" (thinking it was weird).  I have uninstalled and reinstalled my intel graphics driver and IDC audio driver but still no sound through TV.  Also, I will mention that in sub control panel > sounds and devices there is a link to the SRS Premium Sound technology.  As you can see in the image below, the Samsung device is, but it is greyed out and cannot be selected. Can someone please?

  Well in case anyone is interested I have solved the problem (only took me 12 hours to understand, lol).  Apparently, even if the Samsung TV did not appear in the audio options, you can still right click in the empty box and a toggle option will appear.

• I have no sound from the external speaker

  I connected this morning my iPod in my car, as always. But today I got the only sound from the internal speaker and no sound from the external speaker in the car. So far I have never had problems.

  How did the car system connected to the car?

• I have no sound on the computer after the installation of Windows XP.

  After the download of Windows XP in a torrent of the 'P2P' file on a disk. Then I installed it. But now, there is no audio device.

  Anyone know what I can do?

  Original title: no sound after installation of windows XP

  Hi paowie1,

  Thanks for posting your query in the Microsoft Community. You seem to have a problem with the no sound on Windows XP. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.

  We start with a few questions-

  (1) don't you perform a clean installation of Windows XP?

  (2) what is the brand and model of the computer?

  (3) have you done other changes on the computer?

  I would like more information about the issue.

  Method 1-

  I would have you look at the article-

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB#top

  Method 2-

  I would have you look at the article-

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  We know if you need help. We will be happy to help you.

  Thank you.