How to create a time counter

Similar Questions

• How add/create clock, timer, time code, or countdown

  Hi all

  I just tried to find in these forums with google etc but I can't find a way:

  What I like to do?

  How to add a time/clock/timer/code time, visible in the picture with

  Minutes: seconds: hundredths (or frames 25/30/60)

  'xx:xx:xx '.

  Samples:

  Here's an example of how I want to do:

  http://www.YouTube.com/watch?v=ajNXfx4FBOI

  Right now, I'm trying my best with some bike race images like this:

  http://VholdR.com/video/AFM-race-round-5-650-twins-2009-full

  Objective:

  http://www.YouTube.com/watch?v=Lha_ZqWxCJA

  Can anyone help?

  Kind regards

  Marc

  PrPro and AfterEffects, there a timecode effect, that, when applied to a transparent video Clip will do exactly what you want. We can size and position (fixed effect > Motion > scale & Motion > Position), depending on the needs. The version in AfterEffects will also allow color and change fonts, as is required. 4 pre (my version) does not have the timecode effect, but I don't know about later versions.

  There is a plug-in, DVDate (there are actually two, but I am referring to the free Russian one), might be able to add timecode to your videos, but I've never used, as I PrPro and AE. You can explore DVDate, to see if it works for you.

  If not, contact me by PM (from your profile > personal Messages), and I can get the exact details, such as time, the approximate size, from point, etc. and can create a DV - AVI (or similar) of the transparent video with the added timecode effect. I can then post to YouSendIt, for you to download and use. You can then import this film, place it on a track higher video, size and position as required, and you would have it.

  Good luck

  Hunt

• How to create the time dimension?

  Hi friends...
  I'm working on OBIEE since the last 2 months.
  I created a few reports; I don't have the time dimensions in the layer of MDB.
  
  Now, I need to give a few zoom feature in my reports. Almost all of the reports have the time factor.
  As year, month, and day. can I still create the time dimension based on the exercise.
  (1) what is - that I think give the zoom feature in the reports.
  (2) can we have multiple time dimensions in the MDB layer?
  
  
  Thank you very much in advance.

  Toony,

  You can create a time dimension based on the fiscal year, and you can have many dimensions of time within a business model. There is a lot of documentation, of messages and articles about dimensions. If you haven't already done so, check out page 126 of the Server Management Guide and read this article. That should at least help you get started on building your time dimension.

• How to create a timer with variety?

  Hello!

  I create a game and I would like to make a few variables to start to go faster every 20 seconds. It is posible with a timer?

  Yes, you can use a timer to trigger other things to start happening every 20 seconds.  You may have actions to make things go faster in the event handler for the timer.

• How to create a time-lapse with Premiere Elements?

  To the right,.

  I have a digital SLR (Rebel T3i) and I intend to take pictures from time to time. I heard there was a way to do in Premiere Elements and would rather save the money since I already have this great software. I would like to have the steps to do so as soon as possible.

  Sincerely,

  Adobe Pat 206

  Adobe Pat 206

  Many more details, but to start, check out my blog on the basics of the first elements Time Lapse.

  http://www.atr935.blogspot.com/2013/07/PE-time-lapse-video-basics.html

  Later.

  RTA

• How to create a time sequence for multi sessions

  Hello
  I use the global Temp table and I need to insert an identity column (or Seq-Number) in it, but I have also several sessions for my sp and each case should have it's own Seq-number, starting at 0.
  Is there any kind of 'sequence temp' in Oracle? It works the same way as TWG, so several sessions each will get zero fees whenever they will return.
  I also discovered that ROWNUM will not work in my case.
  
  Probably also can I create SEQUENCE in my sp with a unique name, let's say with SID, something like:
  
  Select sys_context ('SID') in the double tmp_SID;
  CREAT SEQUENCE "MYSEQ | tmp_SID start with 0...
  
  
  
  TX
  Trent

  If several sessions will create the sequence with same static name could it be collision? Should I go with the name of dynamic sequence instead?

  You can have the same SEQUENCE (i.e. ' static name') created from multiple sessions. A SEQUENCE is a database object that is not temporary, but permanent (until he fell).
  Although you could 'generate' dynamic sequence names and use them, you must get a better implementation than the execution of CREATE, and DROP statements like that.

  In addition, you could hardly do a multiline block insertion, unless you add a trigger that fires FOR EACH ROW.

  If you need to assign a more value to each line, use a ROWNUM to assign to a new column.

  insert /*+ -- optional APPEND -- */ into target_table
  select s2.*, rownum-0  from (select * source_table s where .....  order by ....) s2
  

  assuming target_table that n + 1 columns where the last column is for the increase of the value. (rownum-0 is to set the first row to 0).

  Hemant K Collette
  http://hemantoracledba.blogspot.com

  Published by: Hemant K grapple Sep 16, 2010 14:13
  correcteed the SQL statement

• How to create a counter in the application?

  I want to create a new counter in the application.

  I use:

  *******************************************************************************

  int i = 60;

  UiApplication.getUiApplication () .invokeLater (new Runnable()
  {
  public void run()
  {
  theCounter.setText ("Count =" + Integer.toString (i)-);
  if(i==0)
  {
  secondQuestion();
  repeat1 = false;
  }

  }
  (}, 1000, repeat1);

  *******************************************************************************

  This is a counter that counts 60 seconds and his work, but the problem is that I don't know how to kill it after 60 seconds!

  How can I fix?

  and is there another way to create a timer?

  http://www.BlackBerry.com/developers/docs/7.1.0api/Java/util/TimerTask.html

• How to create a film of time

  I use 10.1.2 Imovie, how to create a period film. It is easy to add the photos of the project, but how shorten the exposure time, its default value is 4 sec. There are lots of tips for previous editions of iMovie.

  Hi, Don ground

  In the timeline, select all your clips in batch (Edit/Select All).  Then click the Info button in the toolbar at the top of your screen.  (One that has an 'i' with a circle around it).   In the duration box that appears on the right type, in any length of time of the clip you want and press the return key on your keyboard.   All your clips will change the duration that you set.  I was able to settle as fast second que.1.

  With respect to the default setting of 4 seconds, which can be changed by clicking iMovie/preferences, then change the default time in the dialog box that results.   You have to do this early in your project, before you add clips, so that the new default touch.

  Have fun.

  -Rich

• How to create a graph in time real LabVIEW 6.1?

  I am new to programming in LabVIEW (6.1). I wonder to create a LabVIEW interface that can operate the multimeter Keithley 6487, allowing us to apply a voltage and nth measures. With the measures that we have create a chart (V curve i) I find the XY graph, but it only allows to send all the measures at the same time (indexing) to generate the graph and not whenever we take the action so the graph build inn in real-time. I need to know how to create a chart or change the XY graph, so I can generate the i - V curve with each step we take in real time. Whenever we take the action and not once the program ends. Thanks in advance.

  You must place the graphic inside the loop and the use of shift registers to accumulate the X and Y in the form of tables. I do not have 6.1 right now in the process of execution, but it would basically look like this:

  

  Note that the above is for demonstration (the code is in fact a greedy loop). You can consider putting Scripture on file inside the loop. In this way, if the program crashes, you will not lose your data.

  WARNING: Using table build as indicated above will result in continued growth of memory. If your program is running for a long time, this can become a problem. One thing you may need to watch must have a limit on the size of the array. I know there is an example of "Table of XY" comes with LabVIEW, and I'm sure that this is with 6.1. You should take a look at this example, which implements a fixed buffer for the data in the chart size. You should be able to use the VI "graphic buffer XY"directly in your code. "

• How to create a list of chips which is aligned which can occur over time (such as powerpoint)

  Hi all. I'm trying to figure out how to create a list of chips for a training video that will appear gradually as the voice on reveals each point, without the need to have a separate title for each point. Even if I create bullets, especially how to align and having the good spacing between each sentence. Basically I want it to be like an animated Powerpoint slide! Please can someone give me advice on how to do this than all my text/bullet alignment points and are spaced evenly. Thank you!

  Each line is revealed over time:

  Title

  • Point 1
  • Point 2
  • Point 3

  Do in the Titler, and start with the complete list of ball.

  Then create "new title based on the current title" and remove the bottom line

  Do so until that there is only a line on the left.

• How to create my electronic signature for the first time

  How to create my electronic signature for the first time

  Hi debbieh62171891,

  You can fill feature & signature to create a Signature in Adobe Reader. If you want to create a Digital Signature using Adobe Reader you must then a PDF form with signature inside and drive field expanded licence fees. In this case, when you click the signature field it will take you with the process of creating a Digital Signature.

  Thank you

  Abhishek

• How to create an event of time without going through the interface user freeze

  Hello

  I'm new to labwindows and I'm trying to create a time event where every hour for 24 hours, I want my program to write something in excel.

  I tried to use the Delay and SyncWait and these functions freezes to the top of the user interface.

  All the tips/help will be appreciated.

  Thank you

  If you are new to CVI, a good idea is to look at the examples provided with CVI. For your case, I recommend timer.cws and asyncdem.cws. You will find what you need to use a timer function, not the delay or the syncwait.

• How to create a table in if/else or structure without 0-case?

  Hello

  I tried to do for a while now.

  I only managed to think about this in three ways:

  1. (what I'm doing right now create the table through a loop for, fills the table in automatic indexing.) Filled it with many of if true and with a '0' if the value false. The idea was to remove the 0 later in the code. However, this seems very inefficient.

  2 make use of a registry change, which automatically adds the correct number of a table. The problem is that the table will keep growing and growing and at the very least would enormously slow down my program. At worst, it would break.

  So my question is: how to create a table that if a comparison is true, it puts the item in and if not, it does nothing?

  I have attached a PNG of my code snippet.

  Kind regards

  David.

  If you want to only affect exactly as much memory as you need for the table, you can count the number of true elements in the table of Boolean everything first and then assign one of exactly this size. In this way, you are more memory and time-efficient whether overuse (such as allocation of an array of I32 as big as the whole table boolean) or underallocating (from zero element and let it grow automatically whenever you add on).

  Count the true values, allocate an array only the great and then replace each value in this new table with indexes / "I ' value where the real exists." An excerpt from VI:

  

• How to create a header in csv file

  I m still beginner in Labview, I'm just learning it this week...

  I want to do a data conversion for temperature probe...

  I m having trouble creating a header in the csv file, can anyone help me?

  I am also attaching my csv file, what I wanted to do like this:

  DT (ms)	channel 0	channel 1	Channel 2
  0.1	1	2	3
  0.2	4	5	6
  0.3	7	8	9
  0.4	10	11	12

  I also want to know how to make time to count 0 not real time...

  Citras wrote:

  I have to solve the problem, it s quite confusing, I have to use; instead of \t in the separator.

  What is so confusing to this topic?  You have chosen to use the semicolon, so you must explicitly specify the VI to use instead of the default of a tab.

  When I start the program, can I do the dt (ms) count of 0? What I can do is to use the Date/Time Format string, I want Don t the time based on real time count

  You can subtract the current time of the time at the beginning of the program. Use the time to get based on seconds outside of the loop let you time initially and then use it inside to get the current time. Subtract. Note that your loop is clocked by the software, so you won't get the same amount of delta.

  Also: do not hard code paths in the code. What do you think will happen if someone tried to run your VI on a XP machine? This will not work because of the path of the file. Use a control with a default value defined for it.

• I have more than one partition on my hard drive, how to create a shortcut to a particular drive from the desktop?

  I fitted with a 1 TB drive to my macbook, then partitioned several times, all good so far, everything works.

  I use two connections, staff and work. My 'work' connection I have one partitioned drive named "work" which I use as an archive / storage for all work related data, far from any current activity. How to create a shortcut for just this partition to 'work' on the desktop?

  I tried Finder > Preferences > general - show these items on the desktop, hard drives of ticks. But it shows then all partitioned drives.

  The partitions must be included in the side bar of the Finder to choose. You can also click with the right button on a volume and select 'add to dock '. I don't know how to add an alias on the desktop.