How to create an another partition of the HDD without having to re - install Windows?

Similar Questions

• Tecra A8-104: how to create a second partition on the HARD drive

  Hello.

  I had to use the recovery disk, and I deleted by mistake my (two) initials of the partitions on the HARD drive. : ((now, I have only one.

  Can someone tell me how I can fix this?
  I want 2 partitions, not one. x 10

  The Toshiba Recovery CD could create two partitions.
  The installer will ask where or how install the OS on the HARD drive.

  For example, the HARD disk supports 100GB. So you can choose the first 60 GB for installing the OS and the difference (40 GB) could be activated after the installation of the OS.

  This can be done in the management of the computer-> disk management.

• How to create a second partition on the hard drive?

  Hello to all members!

  I recently got some virus on my laptop. So I had to use my recovery cd to recover my system.
  Now the problem is that I have asked me for the partition where are the files are being extracted. I scored at 30 GB.
  Thus, windows works fine but do not appear my rest of 50 GB.
  I thought that the recovery cd will make a second partition as well, but he did not. Now how some other partitions?
  Second question related to the first is how long I can use this recovery disk. I mean windows will remain genuine?

  For the problem of the partition, I don't know of a few possible solutions of cause that I had need of three partitions, 30 GB 1st (Windows default) and two others of 25 GB.
  The best Solution to come in my mind is to make any windows ME or 98 bootable cd and run fdisk to create the remaining partitions.
  But's done it some new questions in my mind. Do I have to use a recovery again cd? If so I don't use this process causes once again he'll wonder partition extract windows files and I will choose 30 GB again.
  And again, it will remove additional partitions.

  Please, help me and erase the questions coming in my mind...

  [Edited by: admin on March 31, 2007 08:32]

  Hello

  Partition Magic 8 is my favorite.
  I use it to create partitions, Manager, mobile, etc. This tool is really great.

  > To how long I can use this recovery disk. I mean the windows remain authentic?
  I put t know what you mean exactly, but the image on the recovery CD is already activated and genuine.
  It s a full version of Windows OS

• How to create a new folder in the voice tab 7 hp slate

  How to create a new folder in the voice tab 7 hp slate?

  I wish to cretae a folder in my home page.

  Please help me...

  Hello and welcome to the HP support community!

  You want to organize your icons in folders, or put a shortcut of data on your home page folder?

  The first is easy, this last not so much.

  Just hold your finger on an icon, and then drag it on another similar icon.  A "folder" will be done with the name "unnamed file".  Press and hold the words to change the name of the folder.

  I'm not aware of a way to file a record of data on the homepage...

  WyreNut

• Please how to create an e-commerce using the muse of adobe

  Please how to create an e-commerce using the muse of adobe

  ECWID is certainly the easiest to customize muse and it's very easy for customers to add/manage products. Another thing that many people love in Ecwid, it's that you can host several stores account. If you know css/javascript then you can do this on your own, but if you want a widget that does, make these widgets.

  If you are looking for some great Ecwid widgets, you can enter these ones that are free. And if you are wanting to customize even more (including the ability to host multiple account stores), you can get these even more impressive widgets for $14.99 with promo code: 1MUSESTORE #.

• How to create and delete partitions automatically?

  How to create and delete partitions automatically?
  The environment is (10.2.0.3) 10g Oracle on the RHEL4.0 system.
  I want to partition the table of MESSAGES by date (NUMTODSINTERVAL(1,'DAY')). One partition per day. Because the table is huge, only 2 partitions (as of yesterday and today) are required to be available online. All partitions as earlier than the day before will be saved, and then dropped. I want to do the partition to create and delete the work performed automatically. How to do?
  
  Thank you

  junez wrote:
  Could do in detail?

  Here is an example of a procedure (part of a package) that adds/add a partition to an existing partitioned table schedule:

  procedure AddHourlyPartition( tableName varchar2, hour date, partitionName IN OUT varchar2 ) is
          sqlCreate       varchar2(4000);
          d               date;
  begin
          partitionName := GetHourlyPartitionName( hourly );  -- name of partition to create
  
          if existsPartition( tableName, partitionName ) then
                  -- nothing to do
                  return;
          end if;
  
          d := TRUNC(hour,'hh') + (1/24);                                -- upper date limit of the partition
  
          sqlCreate :=
          'ALTER TABLE '||tableName||'
                  ADD PARTITION '||partitionName||'
                  values less than
                          (TO_DATE('''|| TO_CHAR(d,'yyyy/mm/dd hh24:mi:ss') ||''',''yyyy/mm/dd hh24:mi:ss''))'
          ;
  
          ExecSQL( sqlCreate );
  
  end;
  

  The partition is safer to create partitions according to the experience?

  It is always better to write good packages in PL/SQL. Packages can (and should) use the application programming interfaces (API). Because our partition custom package that allows the management of partition. Or a messageLog package that allows for logging of application messages, errors, and debugging messages. Or a Notification package that allows to be send by email or SMS notifications. Etc.

  Design and software development, we should always approaches a "+ Lego mentality +"-which is to create building blocks ("+ Lego bricks +") which can be used and reused over and over again. Modularization is of crucial importance in software engineering as the result is not only of reusable code, but also the code that is easier to maintain, extend easier and easier to debug.

• How to create a shortcut to toggle the sound device?

  Anyone have any suggestions on how to create a shortcut to toggle the USB audio device in Device Manager?

  A shortcut is to enable this device, and the other shortcut is disable this device.

  Thanks for all the suggestions

  Hi oem7110,

  · Why you want to create a shortcut to enable or disable an audio device from Device Manager?

  You will be able to create the shortcut to Device Manager but no shortcut to enable/disable a device in Device Manager:

  a. right-click on the space empty where you want to create a shortcut

  b. click the shortcut

  c. in the type of space empty in devmgmt.msc

  d. click Next and follow the instructions in the wizard.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to create a document and insert the words and/or art on both sides of the page

  How to create a document and insert the words and/or art on both sides of the page

  How to create a document and insert the words and/or art on both sides of the page

  You create a document by using an application of word processor like Microsoft Word or Corel WordPerfect or OpenOffice Writer.  Think of it as a broad a page roll.

  When you print the document, you can print all pages of the document on one sheet of paper (the normal default value), or you can print on both sides of a sheet of paper.

  Some printers are capable of automatic double-sided printing.  With others, you print all the odd pages and then take the stack of paper, turn upside down and put it back into the printer to print all pages.  You need either to read your printer manual, or experiment a bit to determine if you need to re - organize the first last pages before printing the second side.

• How to create a restore point in the protection of the system in safe mode?

  As topic the question, how to create a restore point in the protection of the system in safe mode?

  Hello

  read a tutorial on the below link for everything you need to know about the system restore

  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  and read this too

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

• Smartphones blackBerry how to create a new folder in the video folder in the media

  Hi, I'm trying to figure out how to create a new folder in the video folder in the media. I can easily create new folders in the pictures folder, but not in the videos... Why? Thanks in advance for your help.

  well I'm sorry, I think that I have not read your emails correctly.

  The media application doesn't care about records at all. It will read the files, the tags when they are available, playlists, but it will not show the files. with the exception of the pictures.

• How to create my electronic signature for the first time

  How to create my electronic signature for the first time

  Hi debbieh62171891,

  You can fill feature & signature to create a Signature in Adobe Reader. If you want to create a Digital Signature using Adobe Reader you must then a PDF form with signature inside and drive field expanded licence fees. In this case, when you click the signature field it will take you with the process of creating a Digital Signature.

  Thank you

  Abhishek

• I need to update the screenshots for a new version of an app existing Itune application to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  I need to update the screenshots for a new version of an existing iTunes Connect App asks me to download a new version. Since I did not create the original version, can you guide me how to create a new version with the new version number?

  You must call the assistance of the company and ask them to help you with this. You can find contact information by logging on http://digitalpublishing.acrobat.com/ and looking at the Middle at the bottom of the page.

  Neil

• How to create a report based on the item selected from the list of selection?

  Hello

  I created a tables_LOV based on:

  Select table_name table_name user_tab_cols r, d

  where column_name like '% _type % '.

  Then I created a ListOfTables page element, display in a selection list and pointing to tables_LOV.

  I run the page, and I can choose the table I want in the drop-down list.

  How to create a report based on the selected element? (ex: select * from selected_table)

  Thanks in advance

  Salah

  Hi Salah,

  Allright, take a look at this page: http://apex.oracle.com/pls/apex/f?p=vincentdeelen:collection_report

  I think that simulates what you are trying to accomplish. I've implemented the simplest method I could think of.

  The report is based on a collection of apex. If you are not familiar with this, you should study the documentation: APEX_COLLECTION

  To recreate my example, you should:

  (1) create a report (interactive) on your collection

  SELECT *
     FROM APEX_collections
   WHERE collection_name = 'MY_COLLECTION'
  

  (2) create a selection list page_item for the tables that you want to display (in my case, this is called "P38_TABLES")

  (3) create a dynamic action that triggers on the evolution of your selection list page_item. Dynamic action must be a parade of PL/SQL procedure the following code:

  declare
    l_query varchar2(4000);
  begin
    l_query := 'select * from '||:P38_TABLES;
    if apex_collection.collection_exists
          ( p_collection_name => 'MY_COLLECTION' )
    then
      apex_collection.delete_collection
        ( p_collection_name => 'MY_COLLECTION' );
    end if;
  
    apex_collection.create_collection_from_query
      ( p_collection_name => 'MY_COLLECTION'
      , p_query           => l_query
      );
  end;
  

  Make sure that you add your page_item 'Page to send items' section.

  (4) add a real extra action that makes an update of the report area.

  Here are two photos describing the da:

  http://www.vincentdeelen.com/images/OTN/OTN_COLLECTION_REPORT_DA1.PNG

  http://www.vincentdeelen.com/images/OTN/OTN_COLLECTION_REPORT_DA2.PNG

  Good luck and greetings,

  Vincent

  http://vincentdeelen.blogspot.com

• How to create images that react to the size of the browser (and not to the device)?

  How to create images that react to the size of the browser (and not to the device)?

  Hello

  Please try this widget.

  http://widgets-musethemes.BusinessCatalyst.com/tb032.html

  Concerning

  Vivek

• How to create drop down menus in the main menu?

  How to create drop down menus in the main menu?

  such as:

  1 menu 2 menu 3 menu 4

  menu one

  menu b

  menu menu menu x c y menuz

  menu d

  I have the top menu, but don't know how to get the submenus

  Help you to appreciate in advance

  You must set the 'Pages' menu preferences: