NOR USB6210, problem to trigger on a PowerPlay with measurement and automation

Similar Questions

• NOR-DAQ traditional (old) devices of measurement and automation explore 4.7 with LabView2010 under Windows 7.

  In measurement and Automation Explorer 4.7, with LabView2010 in Windows 7, peripheral OR-DAQ traditional (old) appears under devices and Interfaces and it allows me to create a chassis SCXI-1000, and she agrees "Reset for NOR-traditional DAQ.  However, it does not search the modules in the SCXI1000, and when I ask 'trial', he says 'Impossible to test the chassis at this time.'  The entrance of NOR-DAQmx devices for the SCXI-1000 chassis has no problem and detects the modules very well.  I need the Legacy DAQ to a popular former teaching tool that has no equivalent in NOR-DAQmx.

  Unfortunately, NEITHER-DQA traditional (old) for Windows Vista and 7 functions of the only driver on Windows 7 32-bit, as seen on the page of the driver at the end of paragraph 1 Solution. I recommend you move your program to DAQmx.

• Keithley 2000 not identified NOR Measurement and Automation Explorer using GPIB

  Hello

  I recently used NI TestStand and NI MAX with IVI drivers to get my working(using USB) peripheral. He has worked successfully for TG5011 and TDS1002B Oscilloscope function generator.

  Following the same procedure: I started with 2000 model DMM of Keithley with GPIB.

  I am facing difficulties in finding my camera on OR-MAX devices and interfaces. I use a GPIB KUSB - 488B USB adapter to connect.

  I can interact with the device of VISA Interactive Control and KUSB diagnosis tool and you can see the device in the device Windows and KI-Configuration Utility Manager. Surprisingly, I don't see GPIB Board in the NOT-MAX.

  Help, please.

  System details: NI-VISA 5.2 installed on Windows 7, KUSB-488 driver installed in command compatibility mode OR. (only ieee_32m.dll is present), installed UN NOR-488.

  Thank you

  Martin

  To help all those who have read this thread:

  I had the Keithley 2000 NOR-MAX and NOR-Test Stand using IVI Driver (for Keithley 2000 of NOR) using the KUSB - 488 B (GPIB to USB adapt from Keithley).

  Layer of keithley installed IO Keithley and I can see the unit property. I then followed the procedure for IVI MAX and TestStand pilot program and IT WORKED!

  Please find attached the screenshots for Visual clarity.

  Thank you and best regards,

• Urgent! InDesign CC, problems of placement of the image with Mac and Windows

  Hello

  When I tried to place an image or move pages in another file, indesign gives the following error.

  "The file does not exist, you may not, or the file is perhaps currently in use"

  I tried renaming the file, copy the file or re-edit the images... Nothing has worked... I am convinced that this is a problem with the mac and windows integration...

  How can I transfer files without problem from the Mac to the PC or vice versa.

  already solved...
  Mac OS permission issues.
  Adobe customer service solved the problem

  For more explanations and for your understanding...

  1. I create a template for my colleagues to work under Windows. Give them the files with a flash drive.

  2 employees were working on Mac...
  3. I took the model in a flash drive and tried to place some pictures...

  4 indesign gives me an error saying "the file does not exist, you may not, or the file may be in use by another application."
  5. I tried to recreate a link to images in document thinking "Okay maybe." it's a problem of link

  6 indesign gives me an error saying "the file does not exist, you may not, or the file may be in use by another application."

  7. I have tried to move the pages in the document to another, think "might be that I can work around this problem.
  8 indesign gives me an error saying "the file does not exist, you may not, or the file may be in use by another application."

  9. I tried to place another image to another folder

  10 indesign gives me an error saying "the file does not exist, you may not, or the file may be in use by another application."

  11. I tried to rename the file and after that the evolution of the file

  12 indesign gives me an error saying "the file does not exist, you may not, or the file may be in use by another application."

  I guess that this time there is no confussion in your mind...

  to cut the story short, it's a problem generated by authorization on Mac problems. It is resolved by defining the whole Adobe preferences folder and its contents to be read/write, not just read-only.
  In Mac OS: [Drive] /Users/ [username] / Library/Preferences/Adobe
  In Windows [drive] \Users\ [username] \AppData\Roaming\Adobe

  also after you change these files for read/write, you must copy the files you worked on once again.

  Thanks for your attention...

• Problems syncing of Smartphones from blackBerry with 8330 and MS Outlook 2003

  I deleted my category of personal contacts in MS outlook. When I sync my outlook 8330 wants to delete my personal entries in my blackberry contacts. I've used legacy replace outlook in the Panel of conflicts, but I get the same message. I'm afraid to accept the chages because I don't want to lose my blackberry contacts. I use 4.5.0.77 software and version 4.7 of office.

  Thanks for your help. Your solution worked great!

• I have problems watching videos on the internet with IE and Chrome. There is sound, but no picture.

  I have Windows 7 Home edition. I have download IE 10 and can't watch the videos on IE or Chrome. I went to the Internet and reset all default Options. Still no image for the video. Any ideas?

  Hello

  1. this happens with all sites or with any specific Web site?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  Videos won't play or Web pages do not display correctly

  http://Windows.Microsoft.com/en-us/Internet-Explorer/videos-Don ' t work #ie = ie-10-win-7

• Problem: Can't 2GS/s 5152 with single channel data

  Hello again,

  Using the example labview 'Acquisition set up', I can run my digitizer 5152 2GS/s with TIS and active "Run in real time".  However, when trying to implement this in a real program, I got error-107413502, telling me that there is a problem with the activation of TIS.  The property node that I used to call it forced me to change the value to 'write', so I wonder if that is the question.

  Data arrives on a ch0, and the clock is on external trigger.  I have attached the VI field configuration - if someone could take a look and let me know what I'm doing wrong, I would be very happy!

  Thank you

  JM

  JM,

  You are able to run it as a stand-alone VI without getting this error?

  -Christina

• How to trigger SMU - 6363 AI with the PXI-4142

  Hello

  SMU-1082

  SMU-6363

  SMU-4142

  LabVIEW 2012 SP1

  Hello

  I'm trying to trigger action (SMU-6363) analog input with my SMU (SMU-4142). The API OR-DCPower has a VI called VI of Signal to export, that I could use to export the trigger signal in a specific line when 'Complete the event Source' comes up on my EMS.

  The problem now is that i ' v tried several lines to transfer the signal to the SMU-6363, but unfortunately I still have an error of DAQmx. Has anyone tried similar before sync? Which internal lines I have to use to get this working? I'm just not producing a moment of tension at the time that the EMS (Single, Point). After SMU has defined the level it must send the trigger for SMU-6363 who would then measure the external signals constantly.

  Thanks in advance!
  -henkka

  Hello

  I solved the problem of routing measure relaxation of SMU with Signal.vi export online PFI0 of SMU-6363 (SMU 3 channel). Then I started every other SMU channels (0:2) with this signal to trigger by using the configuration digital edge measure Trigger.vi (the VI input terminal is PFI0).

  I configured the data acquisition sample clock to use the PFI0 as a source of the clock. With this method I am able to measure sinus 2 kHz generated with four channels EMS individually with my DAQ without no phase shift (0.1 degrees) between own EMS measurement and data acquisition.

  Hope this helps anyone with the same kind of problem.

  Best regards

  -Henry

• Trigger composition off live clickable place and extended when button area.

  Hello!

  I have attached a few screenshots of the layout in muse so the web page live. As you can see in the first two, the video button, which is a trigger of composition is not higher on the live version as shown in the software. In the second two screenies, you can see the position of the cursor, the clickable area for the Send button is much larger than the size of the button itself. I tried to delete these two widgets on the site and re - create from scratch only to have it happen again.

  So, I would be grateful any help to solve this problem.

  Thanks in advance.

  

  

  

  Well, the answer that you do not like is that you have incorrectly nested your elements and therefore their changes of alignment based on dynamic parameters like size of the browser window, because which is used as a reference instead of possible surrounding elements and parents. You need to work with groups and create a layer hierarchy that reflects your Visual arrangements and/or use according to the rules of formatting rather than rely on an absolute separate elements positioning. Which explains pretty well all of your questions.

  Mylenium

• Is there a problem with ValueChangeListener and af: table?

  Hello...
  
  I use JDeveloper 11.1.2.0.0
  
  Is there a problem with ValueChangeListener and af: table.
  
  Here my problem...
  
  I have two inputtext in af:table and I want to change the value of inputtext2 when I change the value of inputtext1
  so I put the autosubmit = "true" to inputtext1 and set the valuechangelistener method that is in the page bean
  and I put the partial inputtext2 trigger = "inputtext1 id".
  
  but when I run the page and change the value of inputtext1 that nothing happens.
  
  But if I have the previous scenario in af:panelFormLayout instead of af: table its work and the value of inputtext2 is changed to the user.
  
  any ideas...
  
  Thans.

  Sorry for the delay... :(

  And why if I use page JSF is the binding property disappears
  in the tab advanced in the property inspector.

  If you cannot power discovered the binding property in the palette of the means, your jsff page is automatically linked.
  If only the problem.

  try to create the new page jsff, while creating jsff, finally there is radio box something like
  do not expose the UI components automatically. check and create.

  and create a java file. Then you can bind components with the java file as you wish.

  to check your jsff page is autobinded are no means?
  Open your jsff page.

  Menu's that are on it - in this section. You can see the design menu that struck. If you hit it means you see Wizard property page go to the tab component binding
  There is a check box available

  If the box is ticked means that you page are automatically linked. If this isn't the case, you must link.

  -edited lately.

• Keychain, iCloud + problems of Photos on MBPro since changed password and password set firmware

  Hello

  I recently changed the password for the connection on my main account on my MBPro and added a firmware password, but that doesn't seem to work properly: whenever I reboot Keychain keeps asking me to access the local keychain and all iCloud apps are disabled. I also have problems with pictures. FYI my boot HD is encrypted with FileVault.

  I put details on the issues below, as well as what I tried so far (based on the collected suggestions from these forums) as well as some newspapers Console elements that seem strange.

  I don't know how to proceed at this point that some options might make things worse if not done does not correctly (or in the right sequence). I'm tempted to disable Firmware password, go back to the old password, or turn off FileVault to see if the problems goes, but I'm afraid it might make things worse (and I would like to have these features runs later). I also have the opportunity to reinstall the OS and return to a previous TimeMachine upward.

  I would appreciate anyone's help on this one.

  Thank you very much.

  DOM

  Plug

  MBPro Core i5 2.7 Ghz 13 "retina

  16 GB RAM 256 GB SSD + 2 TB external HD.

  Mac OS X 10.11.16 (15-1004)

  FileVault is running on the boot disk (SSD).

  Firmware password has been set.

  I have a Time Machine backup (on a second external hard drive).

  I installed a functional copy of Mac OS X on an external hard drive 3.

  I do not use iCloud keychain.

  I have another admin account that works.

  Problems:

  (1) Keychain: whenever I start the CommCenter ask the session keyring password (I must then enter the previous admin password).

  I wonder then if I want to update the local keyring: to do this I have to enter my new login password in the "current password" and then I type the same new password fields. Once I reboot the problem reappears: exactly the same sequence, as if the information could not stick. Might have something to do with the FileVault and Firmware password.

  (2) iCloud: after having rebooted and enter my passwords from keychain as described above, none of the iCloud applications work (email, Messages, Contacts, calendars, reminders, Notes, find my Mac, iCloud drive, etc.).

  He tells me tells me he is not able to connect to iCloud and asked me to try to do it in the preferences panel. When I tried to connect there, he couldn't connect to iCloud and told to try again later.

  (3) photos: at the launch of Photos he says he cannot open the library system and propose to choose a. When I choose the right pair, it opens fine, but a ton of photos are most referenced correctly. All images come my an external HD (the iPhoto library is also on the same HD), and nothing has changed in the structure of folders.

  What I tried (after the Time Machine).

  1. I installed Mac OS was last updated.

  2 - I activated the guest account and tried to connect: it only works Safari.

  3. I logged in using another admin account: no problem with Keychain and all iCloud apps work. Not tried Photo since this account is not a library and is not configured for access to the main account.

  4. I tried to boot into safe mode: is not work (might have something to do with the password FileVault and Firmware).

  5-return to the main account I ran disk help and fixed permissions: discs seem to be ok.

  6. in the key string App I locked and unlocked keychain using the lock in the upper left corner of the application. When asked for my password I just typed my user password. When I rebooted I had the same problems.

  7. I've tried updated the password in the keychain app by entering the old password and then my new password for connection in the other two fields (new password and confirm). Still problems with iCloud and after restart I have the same problems of Keychain.

  8 - I tried resetting my default keychain: I got an error, because I don't have the permission to do so.

  9 - I tried to create a new keychain session and making it the default keychain, but I keep getting the same problems (iCloud does work does not + issues of password even after I reload).

  10 - iCloud: I tried to close the session from iCloud, then enter my iCloud ID and password, but it says no more: it cannot connect or that the Mac is already connected to this account. I closed the session again, iCloud used Safari to manage my AppleID (https://appleid.apple.com/), listed devices associated with and my MacBook off the list: I always have the same questions even after reboot. I even tried to delete the iCloud account since the Internet Accounts preferences panel, but it is not listed. I tried to add it, but he said that the Mac is already connected.

  11. in Terminal, I glued the special order in some discussions (find ~ $TMPDIR..------(-+ flags sappnd, uappnd, schg, uchg o! - user $UID o! - perm - 600-) 2 > & -| wc-l | pbcopy) and got 21 to 22, and a result the first time earlier.

  12 - looking at logs just console after reboot, I see a couple of things that seem odd that appear multiple times with slight variations (I paste only an example):

  Sandbox: launchd (1) system policy: deny (1) file-writing-break the/private/var/run/dyld_shared_cache_x86_64h link

  HideUntilCheckIn of the property is a problem of architectural performance. Please transition away from him.

  sharedfilelistd [356]: [default] could not save SharedFileList in/Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentApplications. SFL with error error Domain = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"com.apple.LSSharedFileList.RecentApplications.sfl"in the folder"com.apple.sharedfilelist"." UserInfo = {NSFilePath = / Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentApplications sfl NSUnderlyingError = 0x7fd93a70ec20 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}

  [NetworkDefaults]: cannot write new default values of network disk: error Domain = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"networkDefaults.plist"in the folder"Géoservices"." UserInfo={NSFilePath=/Users/Marc/Library/Caches/GeoServices/networkDefaults.pli st, NSUnderlyingError = 0x7fb1dbf69530 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}

  Keychain Circle Notification [448]: Displayed at the launch:)

  )

  securityd_xpc_dictionary_handler Keychain circle [448] DeviceInCircle error Domain = com.apple.security.sos.error Code = 4 "Keybag never unlocked, ask after first unlock" UserInfo = {NSDescription = Keybag never unlocked, ask after first unlock}

  iconservicesagent [381]:-[ISGenerateImageOp generateImageWithCompletion:] has no image descriptor composit of < ISBindingImageDescriptor: 0x7fbfe36118a0 >.

  accountsd [384]: [warning] Services all gone, delete all accounts

  SpotlightNetHelper [420]: __tcp_connection_tls_session_callback_write_block_invoke.434 tcp_connection_tls_session_error_callback 12 22 error

  Quicksilver [470]: Error resolving alias file:///Volumes/ABC/DEF/GHI.JPG%20alias: error Domain = NSOSStatusErrorDomain Code =-35 ' nsvErr: no such volume.

  Sandbox: SpotlightNetHelp (420) deny (1) - reading-file data/Applications/App Store.app

  (This repeats for many applications and their content files)

  12 - looking logs console after entering my iCLoud references (in the prefs ICloud panels) I get at least about the error that is similar in the newspapers after the reboot (cannot save SharedFileList)

  com Apple.Preferences.iCloud.RemoteService [512]: error = AKAuthenticationError Code =-7034 '(null)' Domain: AKAuthenticationErrorForcedFailure

  com Apple.Preferences.iCloud.RemoteService [512]: error in CoreDragRemoveTrackingHandler:-1856

  com Apple.Preferences.iCloud.RemoteService [512]: error in CoreDragRemoveReceiveHandler:-1856

  sharedfilelistd [283]: [default] could not save SharedFileList in/Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl with the error Domain error = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"com.apple.LSSharedFileList.RecentDocuments.sfl"in the folder"com.apple.sharedfilelist"." UserInfo = {NSFilePath = / Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl, NSUnderlyingError = 0x7f915242c1b0 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}

  sharedfilelistd [283]:-[ListStoreSnapshot writeToFile:] could not save SharedFileList in/Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl with the error Domain error = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"com.apple.LSSharedFileList.RecentDocuments.sfl"in the folder"com.apple.sharedfilelist"." UserInfo = {NSFilePath = / Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl, NSUnderlyingError = 0x7f915242c1b0 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}

  Keychain Access application for Keychain "login" after changing the password

  The problems of Keychain - see post of khati

  OS X always ask to use your passwords in keychain

  Try to go into System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing.

  Have you tried the signature to iCloud and then reconnect?

• Problem with keyboard and touchpad

  The problem in my MacBook Air was held. Keys of the keyboard do not work. The keyboard and touchpad are unresponsive. I'm not able to log in to my user account on Mac or type anything.

  I tried to change the system preferences: language & region, dictation, accessibility. It does not solve the problem.

  I connected the external keyboard and mouse connected via USB and they work fine. But the Mac keyboard and touchpad are still not respsond.

  Someone at - he ecountered the same problem? Any advice how to fix it please?

  Plug my Mac: MacBook Air (13 inch, mid 2013) OS X El Captain 10.11.6 (15G 31)

  Reset the SMC could solve the problem.

  Reset the management system (SCM) controller on your Mac - Apple Support

• Problem with IMovie and Quick time

  Hey everybody,

  I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  Could someone please help me solve this problem?

  Thank you very much in advance.

  Concerning

  Could someone please help me solve this problem?

  Not only based on what you already said.

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Since the installation of Mac Mavericks all my friends with Macs and I have problems with the cursor disappears, that in Firefox, Safari is very good...

  I stopped using Firefox as nothing I've done has corrected this problem. I tried to close Firefox and restart it, I erased all my Add-ons and then added adblock back (it's the only one), but it still does not work. I deleted files so that I have more space - I can't think of anything that works. I talked to four of my friends with Macs and they are all having the same problem with Firefox since the Mavericks.

  Cursor disappears huh? It's quite strange. All of the compatibility of the Mavericks can be followed in [Bug 883824]

  Try this work around:

  1. Go to Firefox > Preferences > advanced > general
  2. Always check "use the cursor keys to navigate through the pages.
  3. Press OK.

  Or try the Mac preferences noted here: https://discussions.apple.com/message/23542890#24471966