How to create the mirror'd discs?

Similar Questions

• How to create the default recovery disc factory with OneKey Recovery 4.0

  I have a K430 and before I use it (as with any machine, I bought) I wanted to make my recovery disks.

  Throughout this site there are guides to do this with version 7, but this desktop computer has version 4.0 of OKR

  I can record an image of my partition system but need the ability to install on a clean hard disk in case of hard drive failure.

  I have checked the forums and Kb and been through programs of Windows 8, but nothing shows me the right way.

  This is compounded by the fact that none of my imaging tools drive as the drive Seagate, which was delivered in this machine (Ghost4Linux, CloneZilla, Acronis Migrate Easy)

  Where is my option create said support?

  Just to close this one.

  I talked to the customer on the phone this post having remained unanswered,

  There is no recovery disc to buy or to create for this machine, should so hard drive failure you need to source your own discs.

  This machine will be returned now, a lost for the sake of a DVD sale.

  I must say the guy who talked on the phone was really helpful and courteous, unfortunately hampered by the policy of the company.

• Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

  original title: error 0xC0AA02FF

  I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

  "The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

  Hello

  What method did you follow to create the system repair disc?

  I suggest you to create the system with different USB repair disc and check if it helps.

  Means all try the methods and check them off below if it helps.

  Method 1:

  Try to put the computer in a clean boot state, and then check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose a small amount of data while performing the check disk.

  I also inform you that the data on the USB key will be lost. You should take a backup.

  You can also check with the reference article below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

• Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition

  Hello

  I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.

  I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.

  I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?

  And the help is very appreciated.

  Thanks and regards,
  Dinesh

  Recovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.

  A sort of migration of files from one to the other HARD disk is not solution.

  Only for laptop with factory will work and the usable recovery partition.

• How to lock the mirror upward on my M2 A77 so I can blow off the dust on the sensor?

  I have a speck of dust on my sensor, but I can't understand how to raise the mirror to use the fan. Is this possible on a camera I AM?

  Select the cleaning Mode in the menu of configuration (with the Toolbox icon).

  If that is not clean the sensor, there is a little lock at the bottom of the mirror. Lift it and the mirror will lift, giving access to the probe. You should lower the mirror when you are finished.

• Do you know how to create the façade as a backdrop

  Do you know how to create the façade as the Web, I mean like we did the word and click on it will be rather another process by clicking on the button.

  If possible, I can click on the link in the table... No idea no matter who

  In my view, that the user questioned a hyperlink control. See, for example: http://forums.ni.com/t5/LabVIEW/NI-Example-Finder-Like/m-p/1023011#M455994

  You could probably do this in an XControl.

• How to create the icon on the desktop just for SilverLight?

  How to create the icon on the desktop just for SilverLight?

  Hello

  • Why is it you are wanting to create a shortcut?
   
  Silverlight is a plugin for Internet Explorer and other browsers, Windows Media Center is to allow video playback which supports silverlight. You cannot create a shortcut for the same.
   

• How to create the usb flash disk to Reboot

  How to create the reboot usb flash drive. If I want to do a recovery or restart the usb flash drive how to

  Hello

  read the google links

  and make sure that your motherboard allows you to boot from USB

  http://www.Google.com/search?hl=en&source=HP&q=how+to+make+a+USB+flash+drive+bootable&AQ=1&AQI=G3G-c1g3&aql=&OQ=how+to+make+a+USB+flash+drive

  and if you talk about the recovery partition of computer manufacturers from the D: to a bootable flash drive, you can not do

• I want to know how to create the account admin hiden for my laptop.

  original title: admin account

  I want to know how to create the account admin hiden for my laptop.

  She has windows vista. I'm the only Admin and the only user. No other person has access.

  The hidden account called administrator is already present.  To activate it:

  1. Click on Start > all programs > Accessories .
  2. Right click on command prompt .
  3. Click run as administrator .
  4. In the command prompt window, type net user administrator / Active: Yes
  5. Press enter .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• How to create the .cod file to run on the Simulator BB9900

  Hi, I already from the zip package in order to use the bbwp command to create the .cod file and be able to run on the simulator of BB9900, but when I run this command as described in: https://developer.blackberry.com/html5/documentation/compile_ww_app_for_smartphones_1873321_11.html

  It creates two files, each with a .bar file, this type of file, I can't run it on the 9900 Simulator but a .cod file is required to run applications on the sim card.

  I don't know how to create the .cod file.

  Thank you

  Have you used Blackberry Webworks SDK for smartphone or Tablet SDK? The .cod files should be located in the subfolder OTAInstall of your output folder if you are using the Webworks SDK for Smartphone

• How to create the scroll to the menu icon click event bar

  How to create the scroll to the menu icon click event bar

  (as the "field of scrolling image")

  In my opinion, it is better for you to try something to help implementation of your solution to ask for the code.

  For example, create a few BitmapFields with icons that act as buttons.  There is source for this sort of thing on the forum if you look at, I think, looking FRO Image button, icon or Bitmap button.

  Once you have these buttons work, add these in a HorizontalFieldManager.

  Good luck.

• How to create the menu on the LEFT, as in new BBM?

  Is there any sample how to create the menu on the left of the application as in the new BBM?

  As I know not - there's a good menu, context menu, top menu... but how to create left?

  It's just a TabbedPane: https://developer.blackberry.com/cascades/reference/bb__cascades__tabbedpane.html

• How to create the Splashscreen for BlackBerry UiApplication?

  Hello!

  I'm new to BlackBerry,

  Can u tell me pls, how to create the SplashScreen.

  PLS, suggest me-

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800256/...

• How to create the user account using the command?

  How to create the user account using the command?

  Open cmd as administrator, and then type the following commands one after the other

  NET user / add program mypassword
  net localgroup administrators program / add
  net share concfg * C:------/ grant: program, complete
  This will create a user account with the name "Program" and the password "MonMotpasse".

  You can create the user name and password of your choice.

• How to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!

  Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
  step by step information!

  Hello

  I suggest you to refer to the links and check if it helps:

  Create a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

  Join a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Let us know if it helps.