How to create the TCP non-blocking server?
Hello
I would like to have a TCP server at my request. It will go about their business as usual, but in the background a TCP server sits waiting for a client connection. If such a link exists, the normal code will send stuff on this topic otherwise it will just not send. Currently, I do not see how to stop this blocking while it waits for a client (block waiting on TCP listener). I looked at the example of client/server TCP, but it remains blocked in the same way.
I would like advice on how I'm framing such a request. I also want to do the same on the client side. Go about business as usual and if a connection can be established at a time given, then send stuff on that connection otherwise just not worth it.
Concerning
Ashley
LabVIEW parallel code usually runs in parallel. This is true even a wait - if inside a loop, you wait 100ms and other code in parallel, it is not delay execution of other code, rather he runs forward and the other code at the same time. When both have completed, the loop can proceed to the next iteration. So yes, if you have a loop with a 1000ms wait and another with an expectation of 100 ms and waits take longer to execute any parallel code in loops, then the loop of 100ms will last about 10 times as many times as the loop with the 1000ms wait.
I recommend that you put the waiting on the listener in a separate loop and also have another parallel loop that manages the communication when the connection is established. You can then use a timeout (forever) of-1 on waiting on the listener, and this loop will be almost never run or use resources except what is first of all establish a connection. To kill this loop, close the listener somewhere which depends on waiting on execution of the listener. When a new connection is established, put the link in a queue, where the communications loop can pick it up.
Tags: NI Software
Similar Questions
-
How to create the new folder on Oracle UCM?
Hello
After that I start the UCM_server I can't find how to create the new folder and I can't find the record of the 'Contribution records '. as shown in the attached picture.
Hello
Is it a new installation? You can configure the WCC with folder folder_g or framwork. You can use Server Admin-> component for Manager screen set up. It is recommended to use the framework with version dot 8 for optimizing the performance and scalability.
About java applet question please check forums UCM browser compatibility issue
Internet Explorer
- Click on Tools , then Internet Options
- Select the Security tab, and then select the custom level button
- Scroll to script Java applets
- Make sure the enable radio button is checked
- Click OK to save your preferences
Chrome
Chrome 42 version and more. From Chrome version 42 (released in April 2015), Chrome has disabled the way the browsers support plugins. More information
Firefox
- Open the Firefox browser or restart it if it is already running
- In the Firefox menu, select Tools, and then click the option Add-ons
- In the Add-ons Manager window, select Plugins
- Click on plugin Java (TM) Platform (Windows) or the Java Applet plug-in (Mac OS X) to select the option
- Ensure that the option selected is Ask to activate or enable always or on older versions of Firefox, click the Activate button (if the button is disable, Java is already enabled)
Safari
- Click on Safari and select Preferences
- Choose the Security option
- Select allow Plug-ins, and then click manage the Web site settings
- Click on the Java element, select an option (Ask, authorize or allow always) in the drop-down list When you visit other Web sites
- Click done, and then close the Safari preferences window
Opera 4.x and Up
- Opera for Windows does not use Java, but an embedded already inside the Opera Web browser version.
- Opera for other platforms can supports Java. Please consult your Opera Platform documentation.
- For more information, please see the following Opera support article:
Support for the Java software at the opera
Thank you
Amey
-
How to create the cluster in weblogic
Hello to all the ups...
We pass our 6i has 11 GR 1 material. After the migration of our very poor server performance. So now, we want to use clusters. After a google search, I have not found any better way to do. We create two independent with machine
Server Admin
Forms
Reports
Lets assume that the machine name is SACHIN1 and SACHIN2.
Now, how to create the cluster on SACHIN1?
Please help me.
Thank you
Sachin
Hi salah
I understand, he has several steps. The steps apply only to the WebLogic Server.
To ensure high availability with a top layer products it is WDM. I did research more far and I found that there is a WDM for forms and reports.
I found WDM for forms and reports 11.1.1.2:
http://www.Oracle.com/technetwork/database/features/availability/MAA-EDG-frd-129690.PDF
Is there a reason on why migration is 11 GR 1 matter? first support for 11 GR 1 matter ended in June 2014
http://www.Oracle.com/us/support/library/LSP-middleware-chart-069287.PDF
We could get help on the following forums:
Best regards
Luz
-
How to create the rainbow effect in the formulation
I can't understand how to create the same type of effect (completely in the wording) as indicated in the text of the image above. I'm new to Illustrator, and any useful information would be greatly appreciated, thank you.
STO
You can:
(1) in the tool box, set the fill to none;
(2) in the appearance palette dialog box, click Add new fill;
(3) with the new fill selected / highlighted in the main window of Apperance palette, apply the gradient.
In the case shown and similar, you can click the gradient in the Toolbox instead of filling Uni, then change the colors in the palette degraded for each stop end of levels of grey, white and black for the right colors in the color palette (RGB or CMYK), then add stops with intermediate colors. you select / Create to stop clicking in the gradient bar, and you can move the stops in ClickDragging or by setting the percentage values.
The image looks like a little green at 0%, blue 50%, red 755% and flame red / yellow 100%.
-
How to refine the configuration of Vmware server on windows host
Hello
can someone explain how to refine the Vmware host windows server edition?
Hello
First, you decide what you want to use the VMWARE server.
If you want to use vmware server for only to keep the plane comments at end of test system administartion, during the installation of VMware server you will need to customize your installation.
In the Customize installation disable the Modules Perl script which are used for development purposes, after installing the server, go to services & disable services unwanted, assume that you use no DHCP & NAT, then disable these services. In doing so, it will save the memory & performance increase of you host mechine.
When you create your mechine comments try to reduce unwanted devices, how to remove the floppy drive if you don't want to use in the mechine comments. like this, try to reduce the additional devices you use rarely, if you're runnin server edition comments mechines, then try to reduce you is display resolution, which will give a good performance.
Kind regards
Jak
-
HOW TO CREATE THE WINDOWS MODEL
Dear all
I'm new to the ESX Server do not know how to create the window model in EX Server I mean customer infrastructure. So that I can do a lot of copy of windows from this model.
Kindly help me to solve my problem step by step.
Thank you
Malik Adeel Imtiaz
NetSol Technologies
Hello
Create a new virtual machine in Virtual Center - install the software updates that you need in this model etc etc.
Click right of the virtual machine when you finished and chose "convert model', if you need later update it is again you can 'convert virtual machine' and update before make you a model again.
-
Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition
Hello
I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.
I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.
I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?
And the help is very appreciated.
Thanks and regards,
DineshRecovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.
A sort of migration of files from one to the other HARD disk is not solution.
Only for laptop with factory will work and the usable recovery partition.
-
Do you know how to create the façade as a backdrop
Do you know how to create the façade as the Web, I mean like we did the word and click on it will be rather another process by clicking on the button.
If possible, I can click on the link in the table... No idea no matter who
In my view, that the user questioned a hyperlink control. See, for example: http://forums.ni.com/t5/LabVIEW/NI-Example-Finder-Like/m-p/1023011#M455994
You could probably do this in an XControl.
-
How to create the icon on the desktop just for SilverLight?
How to create the icon on the desktop just for SilverLight?
Hello
- Why is it you are wanting to create a shortcut?
Silverlight is a plugin for Internet Explorer and other browsers, Windows Media Center is to allow video playback which supports silverlight. You cannot create a shortcut for the same. -
How to create the usb flash disk to Reboot
How to create the reboot usb flash drive. If I want to do a recovery or restart the usb flash drive how to
Hello
read the google links
and make sure that your motherboard allows you to boot from USB
and if you talk about the recovery partition of computer manufacturers from the D: to a bootable flash drive, you can not do
-
I want to know how to create the account admin hiden for my laptop.
original title: admin account
I want to know how to create the account admin hiden for my laptop.
She has windows vista. I'm the only Admin and the only user. No other person has access.
The hidden account called administrator is already present. To activate it:
- Click on Start > all programs > Accessories .
- Right click on command prompt .
- Click run as administrator .
- In the command prompt window, type net user administrator / Active: Yes
- Press enter .
-
How to create the .cod file to run on the Simulator BB9900
Hi, I already from the zip package in order to use the bbwp command to create the .cod file and be able to run on the simulator of BB9900, but when I run this command as described in: https://developer.blackberry.com/html5/documentation/compile_ww_app_for_smartphones_1873321_11.html
It creates two files, each with a .bar file, this type of file, I can't run it on the 9900 Simulator but a .cod file is required to run applications on the sim card.
I don't know how to create the .cod file.
Thank you
Have you used Blackberry Webworks SDK for smartphone or Tablet SDK? The .cod files should be located in the subfolder OTAInstall of your output folder if you are using the Webworks SDK for Smartphone
-
How to create the scroll to the menu icon click event bar
How to create the scroll to the menu icon click event bar
(as the "field of scrolling image")
In my opinion, it is better for you to try something to help implementation of your solution to ask for the code.
For example, create a few BitmapFields with icons that act as buttons. There is source for this sort of thing on the forum if you look at, I think, looking FRO Image button, icon or Bitmap button.
Once you have these buttons work, add these in a HorizontalFieldManager.
Good luck.
-
How to create the menu on the LEFT, as in new BBM?
Is there any sample how to create the menu on the left of the application as in the new BBM?
As I know not - there's a good menu, context menu, top menu... but how to create left?
It's just a TabbedPane: https://developer.blackberry.com/cascades/reference/bb__cascades__tabbedpane.html
-
How to create the Splashscreen for BlackBerry UiApplication?
Hello!
I'm new to BlackBerry,
Can u tell me pls, how to create the SplashScreen.
PLS, suggest me-
Maybe you are looking for
-
After update, I can't get over my address bar. Help!
Since I've updated my Firefox, I can't type in a word in the address bar to search for on the internet. When I press on enter, nothing happens.
-
How can I prevent a feature of the opening when I open Office?
How do you keeps magnifying glass to open registration?
-
We want to wipe everything to an acer aspire 5630 laptop, how can we do
My laptop is soaked, I have to wipe all the programs and I need help on how to do it.
-
VISTA administrator accounts disabled. Could not activate the hidden admin
HI - all my VISTA administrator accounts are disabled. I could not allow the hidden administrator because it requires an active administrator. Can you help me create an admin user? Thank you Ganesh
-
problem with the clock and date
I need to change the time and date when I started windows. so, what's the problem?