How to delete files, getting the project exceeds the capacity of the disk in again

Similar Questions

• How to delete files on the recovery disk?

  I'm running out of space on my recovery disk.  I noticed that the compress and the index of the boxes are both checked.
  I would like to know what to do and how to delete files on the recovery drive.

  Thank you for your help.

  It is very unwise to delete these files, because it is your ONLY way to recover your PC in the event of catastrophic problem with the operating system that cannot be repaired by returning your PC to set up "out of the box.  In fact, most of the PC with a recovery partition you cannot save data on that partition.  If you are still determined to do the easiest to remove these data is boot safe mode with command prompt.  Set up the focus on the recovery partition and delete everything form the command line.  I'm not trying to be insulting, but if you don't know how to do that you probably shouldn't be remove your data from the recovery Partition because without falling back on you should have to be pretty savvy to reload Vista and install all the drivers on your own.  Locutys of Borg

  Resistance is futile

  If you don't succeed the first time skydiving probably isn't for you!

• How to delete files using the CMD prompt

  I have problems with the Vista boot, to the point that I can't even get into safe mode or use the Vista disc to reinstall Vista.  However, after searching several forums, including this one, I found instructions in order to use an ide cable to usb to connect my hard drive to another computer.  In doing so, I was able to access all files on the hard drive, so it seems that it's an OS problem, rather than a hardware problem.  Positions listed several files in Vista to remove via the command prompt which seem to be the cause of the problem I'm having, but when I try to do, I get a message that says: 'access denied '.  How to remove the files of Vista in this way?  A few messages mention "taking possession" of these files, but he was very confused (and tedious) way they described.  is there a simple way to layman to delete these files?

  Thanks in advance for your help.

  "Access denied" means that you were NOT in the administrator command prompt.

  Right click on cmd > click on Run As Administrator > now continue with what you have to do... For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How to delete files in the Public recorded TV folder

  I have 2 files that has appeared recently.  I think they came after the execution of the sample file in Public TVThese has recorded a total of nearly 1 GB and also aren't defaging in of Piriform Defraggler.

  When you try to delete I get an error "do not have permissions.

  How to 'deepen' permissions so I can remove these 2 temporary files?

  2 files are:

  {3FEC999A-7AF6-4B2A-9AC0-B7A9FFE31F0C}.tmp.sbf
  {3CCD2269-38FA-4270-8D56-F134290AD6B5}.tmp.sbf

  Thank you... TRinAZ

  Hello

  Here are the steps to change the ownership and permissions of files and folders:

  a. right click on the file or folder, click Propertiesand then click the Security tab.

  b. click Advancedand then click the owner tab.

  c. click change, and then do one of the following:

  ·         To change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.

  ·         To change the owner to a user or group that appears in the area of change of ownership to , click the new owner.

  d. If you want to take ownership of the contents of the folder, select the checkbox replace the owner of sub containers and objects .

  e. click OKand then click Yes when you receive the following message is displayed:

  You are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?

  All permissions will be replaced if you click Yes.
  
  Note folder_name is the name of the folder you want to take charge.

  f. click OKand then reapply the permissions and security settings that you want for the folder and its contents.

  Additional considerations

  ·         An administrator can take ownership of any file on the computer.

  ·         Affecting the ownership of a file or a folder might require that raise you your permissions using user access control.

  Reference: How to open a file if I get an access denied message?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

• How to delete files in the folder of information system volume on replacement disks?

  How can I delete files that were up on another system (XP), after that I inserted the disc into my new Win 7 system.  The files seem to be impossible to remove.  This is not a progress :)  What can I do to remove these files?  They take a significant amount of space, and I want to be able to put what I want on these drives.  What I have to get out my old XP discs just to do this?  Please tell me I don't have to (: I remember to clean my machine win 98 with the commmands BACK a file and directory at a time.)  I hope were not there...

  rfitzpa877

  , This does not resolve the (ARRRG!) system volume information files, but their size is reduced to nothing...  If someone does not know how to remove these files, I would like to know how.  I formatted one of the disks and apparently not one of these folders have yet.  In fact, I bluff on that partition and formatted & that seems to have managed to get rid of these pesky files on this drive.  Am I the only one who thinks I should have control over my own system?  What is the point of having administrator rights?  Maybe it's time we give administrator rights.  I am not at all impressed by it.  From the looks of the number of points of view on this thread, I'm not the only one with this problem.  If I want to disable the protection and to get rid of the files, why I can't?

  You just started to fall on this real guilty about "kits of infected roots.  Lets imagine that a crime is committed in a House.  who is instantly a suspect?  for example, wife disappears > husband is the first to be questioned.

  In the case of a MS OS Microsoft has really strengthened WAY out of bounds. For half a year that I traced the issue to them anyone who or what that monitor my progress erased my data and sent me to a goose chase 6 months have no opportunity to even connect online for days or weeks I was left down my school because I was not able to turn on a computer to write an assignment or a test with any reliability.
  Who got this abuse power?  They think we did by agreeing to there life private terms or agreeing to use icons 'newer and better '.  They rely solely on the low bar of duty of good faith to steal data, record and claim it as their webcam or any ones and zeros, they feel that theirs with an omniscient power of Microsoft update.  Why is Microsoft blameless when a blue screens after a system command to reboot to make effective change OS
  ? Read the comments around KB976902 and the "fix" KB25533552.  They have simply to virtualize all XP sp3 or later PC.  Using video to measure the ability of the PC performance and disk space querying Microsoft then begins to do what they darn well for as long as they wanted regardless of evil as being spent in graduate school.
  This virtual virus haunts me, but he gave up because I happened to scan hundreds of pages of documents trying to burn DVDs or whatever it is to preserve the legal evidence (paralegals).
  I had scanned drive my license to and many other pages that I think someone out there shows some mercy, at least for a little while.  Behaviour cruel and unusual of sadistic implementation of the 'virtual' virus left me broke and homeless.
  Be aware, WBEM, Panther, winsxs and scoring system they say is in our interest or as these naïve technicians say blindly which is just one possible use of the 'virtual' Virus  Visual Basic and root or environment variables allows them to alter the remote registry or to set a timer to attack even when unplugged on the net.  They have no interest in the individual retail customer or small business owner.   Whenever you read "recommended", it is recommended to allow them to invade and infect their own way.
  What virtual "features" are active I really don't know, when there is literally no control over any aspect of the PC.  They could using Adobe Flash network of peer-to-peer "characteristic" of the network or activate Bluetooth to create a network almost undetectable, replacement of NICs with NDIS based pilots allows them to use USB drivers to emulate any hardware driver, even turn off the LEDS of different.  Only because of the vibration of a drive external hard started to peel the onion.
  I can bet my next "update" will be what I call and copyright 'virtual Virus '.
  It is my opinion based on my experience real and even documenting months and months of troubleshooting the data I recorded full time has of course changed or deleted.   These facts showed me that Microsoft et al. will do anything even my personal destruction for nothing more than try to get control of my own personal private property.
  By diligent and hundreds of thousands of hours, I am convinced all my personal files are monitored without legal or judicial supervision.
  So yes, deleting these files is not only the best of the options, it leaves the possibility of attacking or anything be it launch at will and, therefore, it IS THE ONLY OPTION.
  Hidden in the desktop.ini, fonts and all files are really seeds of the worst violations of privacy, not yet imagined by most computer experts or instructions.  Our worst enemy is so once more one inside not the perception of the public of the hacker tracking.
  I submit, piracy of Microsoft operating systems is now a 2nd Amendment RIGHT because they used their OS as a weapon as damaging as any gun could be data that they killed.
  By doing so and by my expert opinion and the notation of the inalienable right of the privacy of the citizens of CA. Microsoft has eliminated any claim of a right to valid author or license because they use EULA another company in they create and manage folders.
  The 'virtual' Virus is clever that, as long as it is insidious.  If they deny then I ask the State of the art and my invention.  I can then request the return in court.  My remedy supposed today
  ?  I am only allowed the cost of the operating system regardless of the magnitude of the fraud and damage that they did to me
  It is clearly stated in the EULA that they believe is valid.
  Until one day I hope to be able to have my day in court before a jury educated I'm destined to become outcast among our society.
  What a difference a year and this little compassion to tears shed my life dissolves around me.
  My confidence they would eventually do the right thing has turned out to be my worst enemy
  .
  Virtual virus alien.

• How to delete files in the cloud?

  Trying to figure out how to remove a file from the cloud of pdf?

  Hi rodm51840960,

  You can delete the file by opening the Document Cloud option in the app or via a Web browser.

  Application: Open Reader/Acrobat > Home > Document Cloud > select the file/s you want to delete > delete.

  

  For the Web: Go to Cloud.acrobat.com > file > Document Cloud > select the file/s you want to delete > Delete (bottom right of the screen)

  Let us know if you face any problem.

  Thank you!

  Shivam

• Problem writing external file on the disk mounted outdoors in Windows

  People,
  
  I have a strange problem with a simple OWB mapping where I am dumping the contents of a table to an external file.
  The versions are OWB v 11.2.0.2 64 - bit on Oracle RDBMS 11.2.0.2 2007 Windows 64 - bit Enterprise Server.
  
  When the external files module is connected to a place that point to a local drive and directory on the OWB server, everything works fine - files are created and written.
  When the external files module is connected to a location that points to a disk mounted on another Enterprise 2007 64-bit Windows Server, I get + "path not valid for the target file, check if the connector is deployed correctly. +
  
  The "File System Path location" in OWB is set to "N" (no slash anyway). ' ' Test connection ' reports OK.
  
  I gave the os user Oracle and "Everyone" (for good measure) all rights on the mounted disk, and I see that the package generated code uses the correct directory, and the directory path is correct on the server. The drive mounted (N :) should appear as a local disk to Oracle I see. I am able to create and delete files on the disk using a command line on the OWB/DB server.
  
  I'm scratching my head on this one...

  Hello Haakon,
  try to specify the directory in OWB with UNC path (instead with a letter, as \\other-server\shared-resource of the drive).
  MS Windows sessions for executed OWB mapping and where you map resource network to the drive letter is different - maybe it's a reson why you can't access the mapping file.

  You close your session to the Oracle database server after network sharing the drive letter mapping?

  Kind regards
  Oleg

• Cannot delete files to the trash (Recycle Bin access denied)

  System: Windows 7 Ent SP1 x 64, i7 930, 24GO RAM with all updates

  When I try to delete files in Windows Explorer, I get the following error (most of the time, but not always):

  Window with the title 'Recycle Bin access denied' and the message

  " cannot be moved to the trash. Do you want to permanently delete it? »

  I can then permanently delete the file, even if I sent to the trash.

  I tried the following (nothing works):

  -checked to see if the file is locked with Process Explorer (find handle or DLL)-it is not (and it can be removed permanently)

  -deleted all the recycle bins on all drives & restarted. New recycling bins have been created, but it did not help.

  -changed of owner of baskets and all files as (with the takeown command). Corrupt system baskets complained, emptied their and restored to their previous state. This did not help the primary problem.

  -set the maximum size to the size of the disk on all baskets. It has no effect on the main problem.

  -J' also checked the security for the folders tab $RECYCLE. BIN on all readers and define "Full control" for users. SYSTEM and administrators had already 'Full comtrol. This did not help also.

  What is strange (and new), is when I open the Recycle Bin, the files are always considered to be "Tiles" (which I did not). If I put it in 'Détails', the change is not permanent - the next time I open the Recycle Bin, the files are showed once again as "Tiles".

  What can I do to be able to delete (all) files via the Recycle Bin?

  Thanks Mike for the response, but none of the methods helped. There was no malware and even in safe mode, I could not delete files to the Recycle Bin. In addition, the original administrator account could not delete to the Recycle Bin.

  But I think I found the culprit:

  Apparently, this problem showed that in the downloads folder, to which I had many junctions (to be easily accessible). Due to lack of space on the C: drive, I remembered that I have moved through properties-> location on a disk with more space. Instead of the old folder in C:\Users\ downloads I put a junction pointing to the new location.

  Now, I had old junctions pointing to C:\Users\personal, which in turn was a junction pointing to a new location. Registration/creation/look at one/etc files in folder downloads accessible through 2 junctions was of course OK, but delete somehow was not able to delete files to the Recycle Bin. When I fixed the remaining junctions to point directly to the new location of the download folder, delete started working OK again.

  Summary:

  Delete the file (SHFileOperation?) is not able to use the trash, if the file is accessible via junction 2 points (or more?).

• How to delete files in bulk?

  Hi all

  I have a list of around 20-30 files and I want to delete them. Currently, I remove them one by one and it is certainly awkward for me. Anyone know how to delete the file in bulk?

  Hello

  There are different ways to delete files on the system by using various approaches.

  1 check - in if you have a query that can be executed to match the set of content items, then use this option to export and check the box to delete all files after successful export.

  2 repository manager - here, you can define a set of metadata, which then the content of the list items and select all and delete.

  3 use the files - if you know that all deleted items, then all move them to the folder and then 'select all' - actions - remove.

  4 CRMI - if you do not use the UI at all, then use CRMI to achieve this goal. Here's a sample: https://jonathanhult.com/blog/2013/07/delete-content-ridc/

  https://mosemp.us.Oracle.com/epmos/faces/DocumentDisplay?ID=1566898.1

  Thank you

  Srinath

• Re: How to get the system running again on my laptop satellite

  Everything ok and ongoing run (Vista 32 bit), also installing the update for Intel chipset seemed to agree,
  but subsequently requested reboot does not work... and the horror began :(

  No matter if the hard drive is installed or not, following events occur after passing on: hhd light indicates activity, also for disk hard desinstallion (!), in the possible bios by F2, dvd lamp is lit and portable crashes.

  What has gone wrong? How can I get the system running again?

  TIA

  The whole story is a bit confusing for me. I put t know how you came the idea to update the driver chipset if everything was OK. Vista is old BONES and it is unclear to me that Toshiba has offered some updates of the chipset.

  What is confusing to me is the fact that you can not enter the BIOS settings.

  When you start your laptop you see Toshiba welcome screen and the grey line down with info press F2 to enter the establishment or F12...?

  What will happen after that? Display stays black or what?
  What happens when you press F2, F8 or F12? Everything works? Can enter you in menu start or advanced startup options?

  Try please start your laptop with the recovery DVD and press C repeatedly on startup laptop. Check if the installation of recovery will recognize.
  Post please a little detailed report.

• I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  I spilled coffee on my Macbook Air and does not illuminate.  How to transfer files from the external hard drive to backup my new Macbook Air?

  If you had a Time Machine backup, you can use the Migration Wizard and connect your new Mac on the external drive which has the Time Machine backup: move your content to a new Mac - Apple Support

• I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  I was getting a new hard drive to my HP laptop. Since I have a key for Windows Vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  original title: reinstall Windows Vista

  I was getting a new hard drive to my HP laptop.  Since I have a key for windows vista from the purchase of the laptop, how can I get the disk to re install the operating system?

  Contact HP (if they had not initially you provided with support or the media manufacturing process or you have lost the media and/or you don't want EU to some tools to clone the old drive to the new or can not do...) for a copy of the media restore/recovery of your system.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?PG=3

• After launching the recovery cd, request activation and product key is unfortunate. So how / where can I get the product key

  product key for windows vista

  After launching the recovery cd, request activation and product key is unfortunate. So how / where can I get the product key

  See if this helps:-

  http://support.Microsoft.com/kb/823570

  If she please vote as helpful.

  Thank you.

• How 'old' games, files with the extension *.gam

  How 'old' games, files with the extension *.gam?

  I am trying to find and run style old text adventure games.  I downloaded "ccr.gam" but it has nothing related to this extension and I can't find what I need.  HELP please.

  Octavmandru

  Depending on the platform, so that the game was up, there may be an available emulator that will allow you to run them. Looking for the name of the platform and "emulator" can give results. If they are DOS based games, DOSBox is an emulator like this.

• Cannot delete files from the external hard drive after copying using Robocopy

  Original title:! VERY DIFFICULT QUESTION! Files that cannot be deleted!

  I did a robocopy and he left during the night and when I came back it was in some kind of loop and my external hard drive was full. The files are not visible in Explorer and if I try to delete them in the command line that fails because some are too long. Urgent I need to redo the space on this external and copy the files to my parents and charity before fly me soon. Please can someone help me.

  * Looks like that I have multiple instances of the same files

  I don't know if you will be able to do this before your flight, but the drive must be partitioned and formatted, reformatted, or scanned for errors of NTFS file allocation table with repairs enabled. Depending on the size of the disk, this could take some time. You can also check statistics of SMARTDRIVE with a utility like Crystal Info disc to see if it is a failure.

  If you do not drive Professional recovery tools available, the native CHKDSK will do in a pinch.

  C:\Windows\System32>chkdsk /?
  Checks a disk and displays a status report.

  [CHKDSK [volume [[path] filename]]] [/ f] [/ v] [/ r] [/ x] [/ I] [/ c] [/ l [: size]] [/ b]

  volume Specifies the drive letter (followed by a colon),
  mount point or volume name.
  filename FAT/FAT32 only: Specifies the files to check for fragmentation.
  /F fixes errors on the disk.
  /V FAT/FAT32: displays the full path and the name of each file
  on the disk.
  On NTFS: Displays the eventual cleanup messages.
  /R Locates bad sectors and recovers readable information
  (implies / f).
  L:size NTFS only: changes the size of the logfile to the specified number
  of kilobytes.  If the size is not specified, displays currently
  size.
  /X force the volume to unmount it first if necessary.
  All open handles to the volume would then be invalid
  (implies / f).
  /I NTFS only: performs a less vigorous check of index entries.
  /C NTFS only: skips, checking of cycles within the folder
  structure.
  /B NTFS only: Re-evaluates bad clusters on the volume
  (implies / r)

  The /I or /C switch reduces the amount of time required to run Chkdsk by
  skip certain checks of the volume.

  Any routine review and car repair will take time. CHKDSK is no exception.