How to deploy a version on the other device

Similar Questions

• If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore all changes since the first full file

  If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore the file with any changes made since the full backup first file...

  If the TM drive storage is full TM automatically deletes the version the oldest files for the new incremental backups can be made. Thus, in this case you cannot restore the versions that TM deleted because it takes more storage.

• Drive on which Windows XP to reside is always labeled as a system drive. How can I make one of the other disks that has Vista or 7 that the new system?

  Change the system drive

  I'll try to explain my situation better than I can.

  My situation is that when I used to have XP installed, I had installed the only drive I had back then which is now the drive D, for a long time, so I have Windows Vista Home Premium 32-bit, Windows 7 Home Premium 32 bit installed on two different discs, Vista is installed on drive C and 7 is installed on drive E , but I don't have XP that I had managed to get rid of it.

  My problem is that the drive on which Windows XP to reside has always left this disc marked as system in the disk management window, and I was wondering how to do that one of the other readers who has Vista or 7 that the new system?

  I already managed to change the startup disk from drive where Vista is installed to, it's just that I need to change the disk that is marked as system to another drive, such as D drive begins to show signs that it comes at the end of his life and I would like to move the startup folder as well as the other files needed to start on the other.

  I assume that you installed Windows XP 1, then Vista, 7 (these 2 OS not in order)?

  And Vista and 7 was by all means upgrade installation?

  Since originally, that you have installed Windows XP on drive D, it should be marked as 'system' and retains so the tag 'system '.

  The volume of the 'system' should be identified as the first primary partition active. It may or may not have the files it contains.

  The fact that the system considers "system drive" does not mean that there are files that it contains.

  Now, you want to delete the existing volume and create a new volume. Needs to be done outside the facility.
  When you start the cd or DVD to start the installation list us readers, if you remove the volume the volume drive letter is already booked, so you get the next available drive letter, do not re-use the deleted volume drive letter.

  If he removed during installation and then recreated as a new volume (formatting does not remove the volume, you need to delete the volume and recreate it)

  -[Posted by Darrell Gorter [MSFT] in another forum.]

  Try to format the XP partition and change the drive letter.

• Common cause of failure of the Mirage server in clustered environment and how customers will be switched to the other server in a cluster

  Hello

  Can someone share me information about common cause of failure of the Mirage server in clustered environment.

  And how customers will be switched to the other server in a cluster to continue their operations from the server failed.

  Kind regards

  C Bathesha

  In general, Mirage servers are not lacking. It is very rare (and not, for example, to problems of storage or endpoitns, which are more common).

  May raise problems of overload, memory or hardware malfunction too little.

  After that you make server standard troubleshooting (the etc system event log), you must file a Service request by VMware.

• How to deploy my portal to the production environment

  Hi all
  
  I use the ASDK developed an access portal, my question is how to deploy my portal to the production environment? You must also install the ASDK in a production environment? Or just install the package of execution?
  
  Thank you
  Alan.H

  Hello Alan,.

  Is this an application ASDK 10 g or 11g? In both cases, the answer is really the same thing: do not install the ASDK in the production environment, but for 11g it's much easier to do.

  Kind regards
  Colin

• NB100: Line-In/Mic-In - how to pass from one to the other?

  Hi everyone - lists of specifications more list entry on the NB100 as an audio Mic-In/Line-In, but I can't find an option to go to the line.
  I would like to be able to record audio with an external preamplifier, therefore the Line-In input, would be really useful.

  Is it just the input that is activated when enabling/disabling gain/sensitivity between Mic-In/Line-In?

  The Mic-In volume would be the same as the change of Line-In?

  Any ideas?

  Thanks in advance :)

  Hello

  In your case you should take a look in the user manual.
  The user manual says that this laptop supports and taken headphone and Microphone jack.

  The mic jack is a standard 3.5 mm jack, and it allows the connection of a microphone or the other device to an audio input.
  This means that you do not need to change anything. Simply plug the connector of right to take.

  Good bye

• Get airport utility to forget the other devices on the network view

  Hello

  Is it possible to get the Airport utility to forget other devices, it's on the graphic display? I live on a college campus so it displays about 15 other aircraft from the airport in the vicinity of my home and I would like to see it just mine! When I was updating the name and password on my base station, Airport utility gave me the option when I clicked on the other devices to 'Forget' them, but as soon as I close, then reopen the Airport utility all return and the only option I have to then when I click on another device must enter the password for it (which of course) ", I do not have).

  Outside him cluttering up the graphic display, I wonder whether, if all these devices are recognized as part of 'My network', is sometimes interfere with my access internet and wi - fi as the speed and the same connection seem to go up and down like a yo-yo (sometimes up to 90 Mbps but also weaker than 0.05 Mbps - less than the old dial-up!). I have been informed by our IT Department University detects a problem with your local network, it can "bleached you' which cuts or slows down your connection into a net - and if all these devices are considered by Airport utility as part of my network so I'm guessing that a problem in one of the base stations that could affect the rest.

  So, is it possible to get just the Airport utility will display only my own base station (Airport Extreme) over a wi - fi (Airport Express) extension?

  Excellent question...

  First airport utility keeps a history of all the airports that he never sees and even if you select forget he never forgets... you need to dip down and remove the plist... as with all things Mac.

  / Users/youusername/Library/Application Support/Apple/AirPort/SavedTopos/Topo-nIfc=en0,nHsh=00000000.plist

  There are a lot of them dated for every time the network topography change. Close airport utility and delete the entire lot... a new will be created when you restart.

  What OS you are using... There is an option... but I'm not sure it works... to show only devices you set up.

  So, open airport utility preferences. Click monitor airport basestations for problems... then don't watch that airport base stations which I configured... Tell me what happened to him.

  

  Outside him cluttering up the graphic display, I wonder if, if all these devices are recognized as part of 'my network ',.

  No, it's just the airport utility is a bit too excitable to find other airports of apple around the place and wants to watch all the...

  They are not part of your network... but in small areas Wireless will cause problems... it, without doubt. Most of the colleges banning people who run their own wireless routers because the result is what you feel... CHAOS.

  There are 3 channels for 2.4 ghz and perhaps 6 or 7 for 5 GHz Wireless AC must so much bandwidth, you have more than 3 or 4 channel without overlap... This means that for every 3 airports you have exhausted all channels... (and all airports after it's battery on the mill).

  15 other aircraft from the airport in the vicinity of my home

  So that means at least 5 airports are run on the same channel you are on average. Wireless was never designed to ensure that the density of life. It's only the airports... think how no apple routers wireless there's around you that are not displayed.

  Open any program wireless diagnostic... There is a built-in to your Mac. see how many names wireless mac can pick up.

  I highly recommend that you stick to the use of the 5 GHz band using a different name... and choose depending on the channel works best for you. No Auto and just stick...

  You'll never find that it works without problems... but there is no doubt that life is easier if people started to build a faraday cage to live in or used ethernet.

• Windows cannot create the network map. Responses of the other devices on the network are delayed or on the network, there is a router incapatible

  Original title: no network card
  I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.

  I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.

• We have two iPhones, two iPads, two MacBooks. On each calendar events are synchronized via iCloud, except the inscriptions on the iPhone 6 +. They don't publish to other devices if the phone receives entries from all of the other devices. Help?

  We have two iPhones, two iPads, two MacBooks. On all the calendar events synchronize correctly via iCloud except the inscriptions on the iPhone 6 +. They don't publish to other devices even if the phone receives entries from all of the other devices. All the settings on the iPhone 6 + match those on other devices. All iOS and OS 10 software is up-to-date. Anyone have any ideas on what could be the problem?

  Hi there, therex!

  It seems that you have done your inquiry very well and it seems you have reduced to the iPhone 6 Plus. But, since you need see events sent from the phone on all your devices, I'll be happy to help you.

  Archive or make Copies of your Calendar (s) -as you work with live data, be sure to not skip this step to protect the information already there.

  Get help using iCloud calendars - test all the steps, but it has been my experience that I forgot to put this particular calendar as my default calendar.

  Thank you for using communities of Apple Support and have a great day!

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• Computer laptop Compaq PresarioCQ40 using Windows 7 32 bit. In Device Manager, I found two items with a trademark right Exclaimation beside 'Devices Bluetooth device' in the other devices section.

  My laptop Compaq PresarioCQ40 running Windows 7 32-bit. In Device Manager, I found two items with a trademark right Exclaimation beside 'Devices Bluetooth device' in the other devices section. Properties, I found that these two elements with problem are found on "Microsoft Bluetooth enumerator.  I tried to run Windows update to get the driver but it says no update available. And I can't find this driver online. Can someone help me solve this problem? Thank you very much

  Hello

  Perform the steps in the link and check.

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Hope this information helps.

• How to know the version of the OS device

  Hello friends,

  I want to know what version of operating system is running on the device...

  How to get information about the OS & device...?

  http://www.BlackBerry.com/developers/docs/7.1.0api/NET/rim/device/API/system/deviceInfo.html#getPlat...
  and other methods of this class.

• How to center text compared to the other two layers

  Hello world

  It seems simple enough: I have two layers of distinct text - both in the same line. One is left-aligned, the other is aligned to the right, so that they specify in the middle. Overall, I want they to be centered.

  

  But because these two texts will have different formulations of various projects, I want to use the model function, so I can edit them in first.

  Is there a way to tell After Effects: "some text there, take two text layers and their Center as a whole."?

  For the life of me I can't figure out how to do. The closest I am to a solution is an expression on the anchor to a null object, which reads:

  W1 = thisComp.layer("Text1").sourceRectAtTime () .width;

  W2 = thisComp.layer("Text2").sourceRectAtTime () .width;

  [(thisComp.width-(w1 + w2)) / 2, value [1]]

  Then the text layers are related to the null value.

  I found this in a post on Creative Cow: multiple text layers to form one. how I can it Center as a whole?: Adobe after effects Expressions

  The problem with that: it works with the text aligned to the right. If you change the text aligned to the left, everything goes to the left.

  Does anyone have an idea how to make this work? It may even be a way simpler than using expressions?

  I hope I could explain the problem. If there's anything missing please let me know.

  Thank you!

  Concerning

  FABI

  There is no demo that is involved in the technique. Alignment tools will not work with a demo. In the screenshot at the top of the page, note the selected text and the reference level setting in the character Panel. I just adjusted the base line in the second paragraph of the text to move it to the top so that it is aligned with the base line in the first paragraph of the text.

  Unfortunately, the process becomes a little more difficult if you want to be able to use this model as an asset of editable text dynamically linked in Premiere Pro. Centering becomes a problem. It's pretty easy to get the width of the text layer but the anchor is based on paragraph and I'm not in any way take the width of the first paragraph of the text and add it to the width of the second paragraph of the text and adjust the anchor point to be at the center of the paragraphs combined.

  You can return to the idea of two layers of text, but use the width of each layer and the ratio between the widths to control the position of a null value. If you then related the two layers for the null value, the null value of centering with an expression based on the width of two layers and the ratio between the width of the left and right text would do the trick. I have to think about how to write this expression a bit. This is probably the solution to your problem, but I don't think I could write this expression in my head.

  What you want to do is to calculate the total width of the two layers (tw) and then calculate the ratio between the width of the two layers (rw / lw) then multiply the width of the layer left by the ratio then you can calculate the offset. You may have to calculate the ratio of the layer from left to the total width of the two layers. As I said, I'll have to think for a minute. There is also the problem of the space between the two layers. You will need to add a space before the first letter of the right text layer, but the size of the right layer won't take into account the space so you have to measure it and add it to keep things perfectly centered.

  EDIT:

  So I did a reflection more and I was doing it too hard. All you have to do is to calculate the difference between the width of the layers both text and divide by 2 and add it to the Center comp. name your layers of text left and right, and then add this expression to a null value.

  r = thisComp.layer ("right Text") .sourceRectAtTime (time, false);

  R.width = RT;

  l = thisComp.layer ("left Text") .sourceRectAtTime (time, false);

  lt = l.width;

  CC = thisComp.width/2;

  DIF = (lt - rt) / 2;

  [dif + cc, value [1]]

  Now, hold down the SHIFT key and parent the two lines of text to null. If you don't want to use the trick of null, you can add the expression of two layers of text. Using the value null makes it easier to move. The expression can also be modified to allow you to position the null or layers wherever you want in the model.

• How to extract several versions of the asset in Photoshop CC 2015? The + icon disappeared in 2015 CC?

  Using Photoshop | Extract assets

  4. To retrieve multiple versions of assets, click on the icon next in the dialog box extract assets assets +. You can specify different format, quality and scale of parameters for each asset.

  But the + icon next to assets in the Extract assets dialog disappeared in Photoshop CC 2015. Please see the pictures below.

  
  

  

  
  

  
  

  Photoshop CC x Photoshop CC 2014 2015
  

  

  Can someone help me?

  Unfortunately the GUI for setting this place has been withdrawn, "from the version 2015 Photoshop CC, extracted active feature is is no longer available.

  .. but the good news are, you can always configure the active generation manually.

  You can check some old settings to export manually here:
  Using Photoshop | Generate the layers image assets

  But here's a quick reminder on how to get there:

  Name the layers/groups you want exported with an extension.

  "Select - use .png '.

  'Group.png '.

  Create a new empty layer to set your options. Depending on how you name the layers, you can change the size, add names to files, set the jpg quality, all sorts of settings for various extensions. The example below will display them 100% and a second series to 200% with a @2 annex x.

  «by default, 100%, 200% @2 x»

  "Select - use .png '.

  'Group.png '.

  Then you just turn it on
  File > generate > Image assets

  It will create a folder in the location of the DSP with the property that you specified.

  Filename.PSD

  Filename-assets

  "Select - use .png '.
  '[email protected] '.
  'Group.png '.
  '[email protected] '.

  If you do not turn off your generation, it will continue to re-export and update files automatically as you make changes to the document.

• How can open ssl version in the system of forms, if applicable

  It is a huge problem. So I was wondering which versions to the OSH and weblogic if there have been problems because of this bug?

  Ordinary versions of apache using openssl. Don' t know what the SST.

  vulnerable versions of openssl were 1.0.1 - 1.0.1f

  http://www.OpenSSL.org/news/vulnerabilities.html

  Touched, 1.0.1f 1.0.1e 1.0.1d, 1.0.1c, 1.0.1b, 1.0.1a, 1.0.1

  So I have no idea, that affects us.

  https://CVE.mitre.org/cgi-bin/cvename.cgi?name=CVE-2014-0160

  http://www.KB.cert.org/vuls/ID/720951

  http://heartbleed.com/

  Code example showing vulnerability:

  https://gist.github.com/sh1n0b1/10100394

  The seller put out some docs on this vulnerability. A must-read for some versions of our favorite product.

  Vulnerabilities of security FAQ for the Oracle database and Fusion Middleware products (Doc ID 1074055.1)

  OpenSSL Security Bug-software (Doc ID 1645479.1)