How to detect BIS support the change?

Similar Questions

• How long Apple will support the iPad mini 1

  Hello fellow Apple lovers,.

  for my restaurant-bussiness I need 1 or 2 very basic iPads as cash-register using Lightspeed software. There no need again, at the top of the iPad Bill.

  My wholesaler suggested me 2 new iPad mini 1 which is a very affordable option. My question for you and apple is: how much time do you think this model to be supported?

  Thanks in advance for your response!

  Pieter Dijkema

  Apple are not here, these are user forums, you will not get a response from them.

  The first generation iPad Mini supports the latest version of iOS (9.3.1), if it will support the next major release we won't know until Apple announces that it is compatible with (the speculation is not allowed on these forums). As it has only 512 meg RAM (Mini 2 and 3 have 1 gig; Mini 4 a 2 gig) is probably limited to updates of iOS it is likely to support.

• How promt user to save the changes when you change the non-base fields?

  Hello
  I have a form with two tabs. The datablock Block_1 on tab_2 is based on a view of database. But all the displayed items of the Block_1 are non-base of data elements. Whenever a user changes some elements of Block_1 and press the button Save, the values of non_db elements copied from the db_items (based on the view), and commit_form is called. It works very well.
  But the problem here is: after the change of some elements of block_1, if the user navigates to another form/option in the menu, the shape is not promt the user to 'save changes' and all changes are lost. How can I fix it?
  I have a form level key-release trigger, (which does not fire) with the following code: -.

  Declare
    X  Number;
    alert_is             alert;
  Begin
        
  If :System.Mode = 'ENTER-QUERY' Then
       
          Exit_Form;
         
  Else
    If :System.Form_Status In ('NEW','QUERY') Then
         alert_is := FIND_ALERT('TMPL_EXIT'); -- "Are you sure you want to exit?"
      X := Show_Alert('TMPL_EXIT');
      
      If X = Alert_Button1 Then
         Exit_Form(no_validate);
      End If;
      Else
         Exit_Form;
    End If;
  End If;
  End;

  When button preesed trigger that fills your block:

  --somewhere in loop after NEXT-RECORD and assigning values:
  set_record_property (:system.cursor_record, :system.cursor_block, STATUS, QUERY_STATUS );
  

  Now you can copy the values of the elements not db to db items in when-validate-item.

  Of course, it is a quick fix and dirty. Good way would be to solidarity block using EXECUTE QUERY, delete everything in mirror and do you calculations in a trigger post-requete

  Published by: Slava Natapov on December 9, 2009 14:18

• How to detect programmatically shows the lock screen?

  Someone had the idea to detect programmatically if the lock screen appears? I want to detect this screen so my application could do special Notifications.

  Thanks for your help.

  Marc, thank you very much. That's what I'm looking for.

• How do I "registered to the" change of name in the tab properties Geaeral systems

  I want to change the name of registered owners to donate my computer to a charity and don't want my name to appear as a previous owner!

  This article should help you:

  "How to change name and company information after you install Windows XP"
    <>http://support.Microsoft.com/kb/310441 >

  HTH,
  JW

• How to detect if loading the page from start or back?

  My Widget has 3 pages, sailing in the following order:
  Page 1-> page 2-> page 3

  Loading page 1, I make a web service call to retrieve a json object that I record in a file on the device.
  Page 2 and page 3 read the file to view its data.

  There are 2 other how to get to page 1:
  (1) starting of widget
  2) press return on page 2
   
  For 1), I want to retrieve the json web service
  For 2), I want to retrieve the json in the file (no web service calls)

  How can I detect if page1 loads from 1) or (2)?

  I found a solution.

  Use the blackberry.system.event.onHardwareKey event, I can intercept the previous page 2 key, set the page1 location.href + value of query string indicating that I'm back from page 2.

• How can I turn off the change of languages when I hit 'ctrl-space "?

  I would like to know if the following problem solved?

  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/d8df1edc-2c9a-4f53-A492-df3165da46fa

  It's really embarrassing that my netbeans code completion works does not :(((

  Guys, I got a solution for you all.

  You need to do this, use regedit.

  Step 1.
  Go to start and type 'regedit' in the space ('search' under Win 7 or "run" under Win XP)

  Step 2:
  Go to HKEY_CURRENT_USER/Control Panel/input method/hot keys
  00000010 is for Ime/NonIme toggle
  00000011 is to shape toggle
  00000012 is for punctuation ' toggle

  Step 3:
  Regardless of the access key you want to change, right-click on the item and select Edit, here are the rules:
  Control keys:
  00 00 00 C0, not 'control' or 'shift' or 'Alt' (set this value if you need not the quick access key)
  01 C0 00 00, "left Alt.
  02 C0 00 00, Maj
  04 00 00 C0, command
  06 C0 00 00, command-shift
  Or a combination of the above to make your own.

  Virtual key:
  the real key, ascii code combination
  20 00 00 00, for space
  21 00 00 00, of Page_Up
  00 00 00 00, no key
  FF 00 00 00, to do nothing!  (This value if you don't need the quick access key)

  Target the EMI:
  it leave it, or change it to 00 00 00 00, for all languages (I guess).

  Reference page:
  http://msdn.Microsoft.com/en-us/library/ms904626.aspx

• How a dimwit rolls back the changes it would bring to the certificates and system folders

  I have pls need help updated collapsed theres also a problem preventing troubleshooting; explore stops when he loves, and I'm sure I changed something I was not supposed too there at - it a way to change it back to the way its supposed to be or if I have to reinstall windows and a second mentioned something to do with certificates

  I have pls need help updated collapsed theres also a problem preventing troubleshooting; explore stops when he loves, and I'm sure I changed something I was not supposed too there at - it a way to change it back to the way its supposed to be or if I have to reinstall windows and a second mentioned something to do with certificates

  ====================================
  No guarantee... but it can be interesting to try to make a
  Restore the system to an hour before the beginning of the question.

  Windows 7 system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• How to detect status of the model deployment process?

  I use powershell and VI-kit of in order to deploy a model of XPSP3.  I need to be able to detect programaticly when Sysprep and VMware customizations that follow are over, so that I can run additional installations through the powershell script.

  I am running VMware ESX Server 3i, 3.5.0 153875, and I use the VI Toolkit 1.5.

  I started polling the virtual machine to see if the virtual machine has been turned on, it works very well.  Then I started to try to look in the VM using the Invoke-VMScript to try and see what happens, it not worked so very well, especially because I am unsure of what I should look for.  I have also spent a lot of time trolling in the VI-box cmdlets to tools, to see if there is no tool for the detection of the State, I think I forgot something.

  Any help with this would be appreciated.

  I use the CloneVM_Task method in the SDK for the guests of deployment models.

  Have you had a glance at the Rob script to Deploy virtual machines based on a model of a .csv.

  Also, this script uses the CloneVM_Task method and has an option to run post-installation scripts.

• How do I listen for the change in the position of a node

  Hello
  
  I want to create a knot of thread/connection between two nodes of the scene. I want this thread node to be updated when one of the nodes is moving. In the common scenario I'd listen for change events in the nodes of the target of the post and update the thread:
  
  targetNode1.translateXProperty () .addListener (new ChangeListener < number > () {}
  public void changed (value of ObservableValue, oldValue, newValue number number) {}
  wire.setStartX (targetNode1.getTranslateX ());
  wire.setStartX (targetNode1.getTranslateY ());
  
  wire.setEndX (targetNode2.getTranslateX ());
  wire.setEndY (targetNode2.getTranslateY ());
  }
  });
  
  
  
  The problem is that the target nodes are children of a different container nodes (who are moving in fact). To listen for change events in the properties to translate target nodes does not work (their parent nodes are moving actually)
  
  Is there way of list of change in the overall position of the target relative to the scene nodes?

  That's right, it's not a super easy way to do. You need to connect listeners to each node in the parent hierarchy. The reason for which we do not have this feature built-in, is because it is extremely expensive (early versions of JavaFX 1.0 pre had "boundsInScene" but which was incredibly convenient, also completely killed performance). Do this for a few nodes is not a problem, but the fact for each node in the scene would be your 3 GHz machine to its knees :-).

  Richard

• How and when AIR support the new iPad?

  I believe that the following will be required:

  -New placeholders in xml application for new iPad retina icons

  -a mode which will allow content made in 'non-retine' iPad to be consulted on the new IPad (as the label that makes the iPhone 4 to fill 4 pixels and serve the iPhone 3)

  -a simulator for all environments AIR, which allows the visualization of the iPad retina display (I guess that he must have scrollbars for the first time in a mobile phone Simulator, since the height will be 2048 pixels:-O)

  -anything left on the list?

  To avoid interrupting the applications that are not designed to screen new retina of the iPad, apple don't allow resolution full retina on applications built with iOS SDK 5.1 or a later version. Thus, to allow the higher resolution on your air application, you must use this version of the SDK when compiling your application. So you can it on a Mac with Air is 3.1 or later version. Use the compiler to platformsdk - point affecting the iOS SDK 5.1 and requestedDisplayResolution the high value. Then, you will get a higher resolution.

• How to detect the change of focus between applications

  LV2013, Win7

  I have a long operation that so I have to.  Let's call it a "scan".

  I start to a particular folder on the disc and look for files within this framework and in those folders, etc.  I am looking for a particular file (*.lvlibp).  When I find one, I need to open it, look for particular screw it contains and check them for executability (broken) and fix the ConnPane, etc.  I put all the elements of qualifications in a menu (in the menu bar) as the submenus and submenus, etc..

  I do the scan in a separate thread, is not as if I'm blocking anything either, but it takes away CPU time that I would rather not use.

  If I do the scan only once, then the user can go to the Explorer, move a file in place, or rename a folder and come back and I miss the changes.

  Right now, I do whenever the single window happens (the one to which applies the menu).  But this means that round in my application of switching windows causes the scanner again, when there is no chance of a new file that appears.

  I would like to do this scan only when it is necessary, that I define as when I come back from another program (WIndows Explorer for example) this single window in my LabVIEW application.    I am ready to accept the fact that Scripts Windows or remote operations may sneak a file in there.  I don't mean to be bulletproof, just accommodating the more common scenarios.

  I don't want to make a kind of vote - the entire application is event-driven, and I want to keep it like that.

  So, how can I do this?

  If I look at the ACTIVATION VI event, it looks like it happens for ALL VI have activated.  I can attach a name-comparison and detect when the right window is coming forward, but again, simply because this window comes forward does not mean that I need to analyze.

  If I look at the event of ACTIVATION of the APP, it seems to be NEVER called. Even in an EXE file, the event seems never to occur.

  If I had an event to DISABLE the APP, I could set a flag when it happened, and the next time that the right window comes up, I could check the indicator and scan if necessary.

  But I did none of this case.

  Any ideas on how to do this?

  I think what I'll do is just watch the LAST MOD TIME of the parent folder.

  When I do a scan, I hide the LMT of the parent.

  Then, whenever the WINDOW is enabled, I'll check the LMT to the case against my hiding place.

  If it is different, then I scan again.

  Check the LMT takes about 50 uSec on my system, a relatively small price to pay.  And I do it when the window comes up to the top, so I will not notice every little detail of what you do, and I don't have to dig into .NET and assemblies and versions and unnecessary and other error messages.

• XY-Graph / plot of legend: how to detect changes in the 2nd/3rd/4th... placement of the legend

  Hello

  I have an XY Chart with 4 slots. How can I detect, for example, the color of the second plot change in the legend. Active plot, using a property node, is always drawn 0. So I'm not able to detect changes in the 2nd/3rd... plot.

  Any ideas?

  Thank you very much.

  Best regards

  Michael

  You can do it with a structure of the event.

• How can I reverse the changes made by Mr Fixit from Microsoft Support

  Problem is that it makes a lot of changes on other user accounts that were unwanted office. It was after that I ran files and records of repair Windows problems with Microsoft Fix it Center.

  Hello

  1. what type of changes have been done on the computer?

  Every time that you run a FixIt it automatically creates a system restore point to revert back the changes. See the article below which explains the system restore in Windows XP.
  Reference:
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

  I hope this helps.

• How to detect changes in the document?

  Dear friends and experts,

  It seems obvious that, with my new project , I opened Pandora's box...

  Pallets to remain open, even when you set a new location of cursor, so I use this to my dialogue.

  But the user can also switch to another document when the palette is open.

  Currently I have a Refresh button, and the user is prompted to use after the passage of another document. The function behind is to analyse the newly entered document and define global variables to update the dialog.

  How I detect the switch of the document? I did find something like onDocumentChange.

  (In the current script a check for the name of the modified document is in the function btnRefresh.onClick to avoid irrelevant work).

  Thank you for all the ideas.

  Klaus

  Hi Klaus,

  This version of your script works fine:

  Just remove some "var" in winPal - dialogue.

  Delete "winPal.show ()" in the Notify function

  give a little more space to st1.

     #target framemaker
      Notification (Constants.FA_Note_PostActiveDocChange, true);
      var globalValue = app.ActiveDoc.Name;
      var winPal = new Window ("palette", "Simple Palette", undefined);  
  
      SimplePalette (globalValue);  
  
      function SimplePalette (outerParm) {
         innerParm = "none";
         buttonOuter = winPal.add ("button", undefined, "Outer");
         buttonInner = winPal.add ("button", undefined, "Inner");
         st0 = winPal.add ("statictext", undefined, "st= " + innerParm);
         st0.preferredSize.width = 300;
         st1 = winPal.add ("statictext", undefined, "Button clicked: " + innerParm);
        st1.preferredSize.width = 300;
        buttonOuter.onClick = function () {
          st1.text = "Button clicked: Outer";
        }  
  
        buttonInner.onClick = function () {
          st1.text = "Button clicked: Inner";
          st0.text = outerParm;                                // this changes the display
        }  
  
        winPal.show ();
      }  
  
      function Notify (note, object, sparam, iparam) {
      // Handle the event triggered after the active document changes.
      $.bp(true);  // here was a type : $.br(true)
        switch (note) {
          case Constants.FA_Note_PostActiveDocChange:
              {
            // Update your dialog box here.
            st1.text = "Current document is " + object.Name ;
            break;
            }
        }
      }