How to detect the Caps Lock without pressing any key

Similar Questions

• Where is the setting to display a notification indicating that the "CAPS LOCK" is activated, any type of program is used?

  Where is the setting to display a notification indicating that the "CAPS LOCK" is activated, any type of program is used?

  Original title: CAPS LOCK.

  Where is the setting to display a notification indicating that the "CAPS LOCK" is activated, any type of program is used?

  There is no native parameter.  Is your keyboard led (if she has a) can be used, OR use a third party program if your keyboard does not have cpome with indicator software (probably it didn't it.)
   
  http://www.georgejopling.co.UK/CapsLock/CapsLock.html

  (Maybe that will do it for you...)

• How to release the CAPS LOCK with Shift in Windows 8

  Older versions such as Windows XP, 7 included an option in the language settings and area extended to release the caps lock with a simple pressure to shift instead of hitting the Caps Lock again.

  I can't find this option in Windows 8 and I regularly hit the CL accidentally. :-(

  Hello

  This option does not seem to exist anymore.
  But there is a method that still does the trick:
  1. Open regedit
  2. Go HKEY_CURRENT_USER\ keyboard layout
  3. In the right pane, modify/add DWORD32 attributes value
  4. Choose the format Hex and enter 10000
  5. Confirm the value, disconnection and it should work!
  Source: http://pubs.logicalexpressions.com/pub0009/LPMArticle.asp?ID=389

• Satellite L300D-222: "insert the boot disk and press any key".

  Hello

  My laptop froze this morning and so I stopped it when restarting it however, I received the message "No boot device - insert boot disk and press any key", what it means?

  I didn't not get discs with the laptop, or have I made the recovery discs. The instruction manual says to press f8 when I restart and go to "menu of advanced start", but it doesn't matter. Where should I go from here, is there a program I can download that would have this disc? All my work on the computer will be lost?

  Thanks in advance for any help!

  Hello

  He looks at the HARD drive died and so the laptop can not boot from the HARD drive but request disk bootable.
  But to be sure, you need to access the BIOS (press F2) and check if the HARD drive is recognized in the BIOS.
  If it s not recognized, then you need a new HARD drive.

  The recovery disc can be ordered here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Why do I get a message saying "no disc not detected - start insert an and press any key to continue", but none of the keys work.

  When I finished installing, partitioning, and all other actions prompted for installing windows 7 with boot camp, my mac restarted all of a sudden without promote me. My 32 gb SanDisk Cruzer Blade was hooked up to an external USB hub. My screen came up with a console that says something in the sense of ' no disc of starting (or reader) detected - insert and press a key to continue. " I then plugged my FlashDrive directly in the USB interface on my Mac. Then I pushed every button on my keyboard, but nothing happened. I then force reset my Mac and retried, but alas, it didn't work. My computer is stuck here and will not respond to anything else. Any help is appreciated.

  Please, please, please! Someone who doesn't know anything also how stupid it may seem. I can't return to OS x no matter what I try. ;(

• no boot found device, insert the boot disk and press any key

  Hello, recently tried to install Windows 10 through the Assistant Boot Camp, with the help of a DVD I bought windows. But I get an error saying "no devices found Boot insert boot disk and press a key" I tried to read and do all the patches, all offer and yet no results. Any suggestions or corrections us would be great!

  MacBook Pro mid 2012

  -i7

  Evo - Samsung 500GB SSD

  -Ram 16

  -Latest version of Mac OS x

  -L' use of 64 GB PNY flash drive

  Your Mac 2012 supported creating a USB Installer to help BC Assistant. Do not use a DVD, a USB Flash drive. Your USB drive must be a USB2 flash drive, if you choose the USB mode and you will need a Windows ISO.

  See also create an ISO image for Windows - Apple Support installation media Boot Camp .

• How to toggle the FN button without pressing FN on Satellite Pro

  Hello

  I use my laptop Toshiba Satellite Pro for coding and to do the key on the keyboard F11 to debug code.
  The problem I have is I hold the FN button before I can press the F11 key.

  I would like to know if there is a way to toggle the FN button on so I don't have to hold it down?

  Thank you

  You use Win8?

  What model of laptop do you have?

• How to detect the webcam feed without receiving those

  Hello!
  I am looking for a way to know when the user (everything in the room/group) begins to make look her webcam and stopped.
  I tried to add the listener to StreamManager

              protected function cameraview_initializeHandler(event:FlexEvent):void{
                  this._connectionSession.streamManager.addEventListener(StreamEvent.STREAM_RECEIVE, this.streamReceivedHandler);
              }
              protected function streamReceivedHandler(event:StreamEvent):void{
                 trace('stream received', event.name, event.streamDescriptor.groupName, event.streamDescriptor.streamPublisherID);
              }
  

  And STREAM_RECEIVE called when another user starts to appear, but the event a groupName = null and streamPublisherID is NULL too.
  I need it to give the possibility to choose the flows required to play and more low bandwidth.
  I tried to use WebcamSubsriber too, but it begins to show the right to water courses when it is received.
  What did I miss?

  You can do something wrong. You can send me a code test and where you found null so that I can run on my sides and point of any error or debug inside.

  Thank you

  Hironmay Basu

• Acer Aspire E1 471 does not start. "no boot device, insert the boot disk and press any key".

  Acer Aspire E1 471. 8 64-bit Windows.

  It does not seem to recognize any boot device.

  Already tried:

  -F2 for configuration of the bios F9 to restore the default settings, F10 to save and exit and restart.

  -boot from usb, dvd... the screen turns black after the screening.

  -forcing safe mode or windows recovery screen (System Restore, auto repair, cmd, etc) the screen goes black, too and after about 20 minutes. the blue screen with the unhappy face appears (pc must be restarted)

  Any suggestions?

  Hi FerminSampo,

  We will try to repair the startup entries, I suggest you follow these steps and try to solve the problem of Windows 8 start.

  a. starting from hirens CD.

  b. try these commands from the command prompt.

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  c. restart the computer and check if the problem persists.

• Tone when I press the CAPS LOCK key.

  How do I set up the control panel so I hear a tone when the caps lock is pressed either on or off?

  Control Panel > accessibility > keyboard use

  Activate the ToggleKeys

• NO BOOT DEVICE - PLEASE INSERT the STARTUP DISK AND press a KEY ANY * please help *.

  I have a Compaq CQ-50 that worked very well. It has been upgraded to winows 7 Bonus a year ago. This is the message I get when I press the power button

  NO BOOT DEVICE - PLEASE INSERT THE BOOT DISK AND PRESS ANY KEY

  any help would appreciated more than you know

  Hello

  Have you tried to reinstall the hard drive if yes. Then the drive is bad & who has need of a replacement.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

• How can I disable the caps lock indicator/notification? -Lenovo Ideapad y700

  Whenever I have press NumLock or CapsLock Maj, a useless and annoying indicator appears. I was extremely frustrated with this indicator, it is often close me out programs in full screen (videos and especially games) just to tell me that I pressed the caps lock button. If possible, I'd love to permanently disable these indicators/notification for caps and numlock.

  The online instructions indicate:

  1. Click Search, and then type Control Panel , and then click the appropriate search results.
  2. Click the icon to display , and then click change display settings on the left panel.
  3. Click on the Advanced settings, and then click the display tab.
     Note: ThinkPad is displayed on the screen tab, should install the Hotkey driver.
  4. Check enable on-screen display.
  5. Under the "NumLock and CapsLock indicator settings" section, look for 'while the digital lock or caps lock is on"section, choose the option 'display the indicator for a few seconds'.
  6. Click apply, and then click OKand click OK to close the window.

     I did not tab display on the screen, and I don't know what is the pilot "Hotkey". I have tried to download a driver related to display the parameters of the Lenovo download page, but that generated an error message. One of my friends suggested that the way to remove this could be through the registry editor, but I am not convinced that I could take without seriously damaging the software in some way.

     Please, if anyone has solutions, suggestions or advice, I would appreciate you sharing! Thank you for reading.

  Hello

  Uninstall the LenovoUtility. That will remove the notifications.

• How to wake up the iphone 6 sec without pressing any button

  How to wake up the iphone 6 sec without pressing any button, which will help you maintain your buttons on the iPhone. Please let me know if you have any ideas on this subject. Thanks in advance.

  You do not have.

• How can I see on the screen, if the caps lock key is in upper or lower case when you complete passwords?

  Original title: Confirmation screen.

  How can I see on the screen, if the caps lock key is in upper or lower case when you complete passwords?

  Hi WalterAshton,

  You are welcome.

  If you want to provide feedback to the development team of Windows, visit the Microsoft Web site below:

  http://www.Microsoft.com/en-us/Windows/compatibility/en-us/CompatCenter/feedback

• How to detect the key ALT pressed in os7

  Hai,

  How to detect the key ALT pressed in Os7...

  Can I use the source for os 7 as below? ,

  protected boolean keyStatus (int keycode final, time final int) {}

  If (Keypad.key (keycode) == Keypad.KEY_ALT) {}

  ...

  Returns true;

  } else

  Return super.keyStatus (keycode, time);

  }

  and also I want to know which is the return of this method? In detail
  How to detect the other touches also?
  What are the updations or changes in the code, on os6 os7?

  KeyCode is a bit model, if you use "is" to compare you won't get accurate results, you should use the operator '& '.

  See
  http://supportforums.BlackBerry.com/T5/Java-development/detect-ALT-and-shift-key-clicks/Ta-p/444976