How to determine the memory total & free memory Vista Ultimate SP2

Similar Questions

• Oracle 10g, how to determine the memory allocated is healthy or sufficient.

  Hi guys,.
  
  I have a 10.2.0.5 production database.
  Currently, my server has 8 GB of physical RAM.
  / 3GB is allocated to the SGA and 1 GB for the PGA.
  Let's say a day is needed for the application (for example, weblogic) to increase the pool of connections from 20 to 50.
  How are we able to know if the memory allocated is sufficient for the existing load as well as the increase in workload?
  CPU is altogether would apply us we can generate on the CPU. If the load is low, I assumed is quite safe to increase the connection.
  Please share your experiences of dealing with this situation.
  
  Thank you

  Chewy wrote:
  How are we able to know if the memory allocated is sufficient for the existing load as well as the increase in workload?

  There are a set of views memory Advisor which will tell you if your memory structures of appropriate size:
  v$ db_cache_advice
  v$ shared_pool_advice
  v$ java_pool_advice
  v$ sga_target_advice
  v$ pga_target_advice
  --
  John Watson
  Oracle Certified Master s/n
  http://skillbuilders.com

• How to determine the amount of memory shipped on the PXI-5114

  How to determine the amount of memory onboard, I have on my PXI-5114?

  Thanks in advance.

  Hello

  I'm sorry I didn't know you already had the map.  There is a property for NO-Scope node to determine the total amount of available memory that we can then divide down to get the memory available per channel.  Please see the vi and help below:

  

  This gives a shot, just drop it in a VI that you use and if it should return your memory cards.  If you don't have a LabVIEW I can probably retrieve the purchased version by querying your serial number.

  Kind regards

  Kyle S

• How to determine the amount of memory was my pci-6115?

  How to determine the amount of memory was my pci-6115?

  I see two beaches of memory OR max.

  My PCI-6115 there 32 or 64 MB memory?

  Range of memory between 1: FE9F7000-FE9F7FFF

  Range of memory between 2: FE9F7800-FE9F8FFF

  It's an old part number for the Board 32 MB.

  -Christina

• How to enable the memory full use in Win 7 Pro 64 Bit OS

  Hello.

  I have a desktop with Win 7 Pro 64 bit and its installed with 8Gigs of RAM above, but when I check in the properties of the computer it shows only 8 GM installed and 3.86 inuse.

  Can anyone suggest me how to get the memory of 8 GB in use. ?

  Concerning

  Ishaan

  Why do you need to use all of your RAM?

  Are you trying to find how to use "RAMDisk"? The link below is for one of the
  software available. A search can find a free version.

  http://memory.Dataram.com/products-and-services/software/ramdisk

  The first I've heard talk of RAMDisk was today in the thread below.

  "You not use RAMDisk?
  .

• I would like to know how to get a debugger and how to increase the memory on my computer of mocarosoft 7 HP

  I tried to find information on the question of the debugger, but I'm at a total loss about how to increase the memory of the computer.  Please help me, because I have school work on this 'thing'.

  The Windows debugger is included in the SDK

  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=8279

  http://msdn.Microsoft.com/en-us/Windows/hardware/gg463009.aspx

• Portege Z930 - how to clear the memory of the fingerprint sensor?

  Hello

  Tell me how to clear the memory of the fingerprint sensor?
  Reinstall the operating system and now I can not add your impressions.

  They have their No....

  > Reinstall the operating system and now I can not add your impressions.
  Stand by. You have reinstalled OS using original recovery image?

• Photosmart 7520: How to erase the memory of my 7520 HP printer all in one?

  How to erase the memory of my 7520 HP printer all in one?

  I try to delete all personal data before recycling.  I also want to remove the password of wireless network that seems to be in memory?

  From the front panel access home, installation, tools, Reset Factory Defaults.  Also make sure that camera cards are removed from the slots on the front panel.

• Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

  I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

  The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

  http://www.YouTube.com/watch?v=IG0lW7t92bI

  BTW why they made it so difficult to get just to the battery in this model?

  WARNING - proceed at your own risk and don't forget static precautions!

  Hope they help and if you have any questions let me know.

  + The message was edited: link has been removed ad channel may not +.

  Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
  Be careful about this.

• Tecra R10 - how to remove the memory module?

  Hello!

  How to remove the memory module?

  Get the following message and for me, it means that one of the modules is broken:

  Out of memory error
  Address = H 00034000
  Read Date = H 28034000
  Write data = H 00034000

  For my opinion, the computer should start up again when I remove the memory broken slice?

  The Australia has soon

  Hello

  You can easily remove the memory modules.
  I think that the Bay is placed at the bottom of the unit.
  Remove the screw that is blocking the Bay, and you will have access to the module.

  Here is a video of how do this on another Satellite L500 laptop. But the procedure is not very different on Tecra R10
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=81

  I hope this helps a little

• It will not play a video cd due to 'insufficient memory' I closed the programs on the taskbar - did not help! What can I do... or how to clear the memory?

  I am running Win 7 on my emachine, and this is the first time, he will not play a video cd due to 'insufficient memory' I closed the programs on the taskbar - did not help!  What can I do... or how to clear the memory?  anyone?

  Hi Ernie,.

  First, you use any type of applications to run your videos?

  Also check links theses below, you may find them useful. (Click on it)

  How to prevent out of memory problems

  A guide to increase the speed of your computer

  I hope this helps.

• Installation on RHEL 5.4 11.2.0.1.0 (64-bit) > how to determine the shmmax

  Hi, everyone-
  
  I try to install on RHEL 5.4 11.2.0.1.0 (64-bit). I have a total of 46G of memory.
  
  It is said that in the Oracle documentation:
  "The minimum required value for shmmax is 0.5 GB. However, Oracle recommends to set the value of shmmax 2.0 GB for optimal performance of the system. ».
  
  In the other docs it says it should be 50% of the total memory.
  
  Please advise!

  If you have access to the Support of Oracle, see notes

  Semaphores and shared memory - an overview [ID 153961.1]
  How to determine the size of the SGA (7.x, 8.x, 9.x, 10g) [ID 1008866.6]

• How to determine the number of highlight ' to write ' for DAQmx generate analog output?

  On the configuration of the stage for DAQmx generate analog output, there is a field "value to write.  I can't find any explanation for what it is, how it determines the value to enter, nor what he writes.  I am trying to go through the tutorials and it cling.

  Someone would give an explanation?

  Hello

  To write value specifies the value to write in the channels, lines or ports selected in string parameters. In other words, this value will be the value of your DC output (for example if you enter 5, your output will be 5V). To get information on different fields in SignalExpress, access help"context-sensitive help. A pane will appear in your work environment that displays the coordinates of the field when you place your pointer over them.

  For new users of SignalExpress:

  Generation of DC signals with NI DAQmx devices: step in the DAQmx build, select 1 sample (on request) in the generation Mode dropdown. You can select a programmatic input to generate, or you can remove the check mark from the check box use programmatic input and specify a value for generating in the field of value to write . NOR-DAQmx help also provides additional information about the data generation.

  Best regards

  M Ali

  Technical sales engineer

  National Instruments

• How to determine the index of an item in a cluster?

  I have a small program that I put in place, as I'm just trying to get up to speed on Labview.  I have a boolean cluster buttons and for some reason the top button of the page is coming through as Index 3.  There are four buttons in the cluster, but for some reason, there has been a change.  The top must be Index 0.  How to do the things fixed?  I do not see how to determine the index of each button through properties.

  Thank you

  The order of items in a cluster is the same as the order that you added them. To change the order, just right click and select "rearrange controls in the group. If you use Unbundle by name, you don't care the order.

• How to determine the amount of ink in the cartridge of 920 ink

  I'm operating a HP OfficeJet 6500 has more with HP 920 cartridges. The operating system is Windows XP. How to determine the amount of ink in the cartridges. I get a "low ink" memo of the printer, even if it's too late.

  Hello

  In the menu, press the right arrow once, then you should see an icon 'meter ink' it will show you an estimated ink level.